A telnet library (including ipaccess-telnet)
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
libtelnet/README

26 KiB

=====================================================================
libtelnet - TELNET protocol handling library
=====================================================================

http://github.com/elanthis/libtelnet

Sean Middleditch
sean@sourcemud.org

---------------------------------------------------------------------
The author or authors of this code dedicate any and all copyright
interest in this code to the public domain. We make this dedication
for the benefit of the public at large and to the detriment of our
heirs and successors. We intend this dedication to be an overt act of
relinquishment in perpetuity of all present and future rights to this
code under copyright law.
---------------------------------------------------------------------

I. INTRODUCTION
=====================================================================

libtelnet provides safe and correct handling of the core TELNET
protocol. In addition to the base TELNET protocol, libtelnet also
implements the Q method of TELNET option negotiation. libtelnet can
be used for writing servers, clients, or proxies.

For more information on the TELNET standards supported by libtelnet,
visit the following websites:

http://www.faqs.org/rfcs/rfc854.html
http://www.faqs.org/rfcs/rfc855.html
http://www.faqs.org/rfcs/rfc1091.html
http://www.faqs.org/rfcs/rfc1143.html
http://www.faqs.org/rfcs/rfc1408.html
http://www.faqs.org/rfcs/rfc1572.html

II. LIBTELNET API
=====================================================================

The libtelnet API contains several distinct parts. The first part is
the basic initialization and deinitialization routines. The second
part is a single function for pushing received data into the telnet
processor. The third part is the libtelnet output functions, which
generate TELNET commands and ensure data is properly formatted before
sending over the wire. The final part is the event handler
interface.

IIa. Initialization

Using libtelnet requires the initialization of a telnet_t structure
which stores all current state for a single TELNET connection.

Initializing a telnet_t structure requires several pieces of data.
One of these is the telopt support table, which specifies which
TELNET options your application supports both locally and remotely.
This table is comprised of telnet_telopt_t structures, one for each
supported option. Each entry specifies the option supported,
whether the option is supported locally or remotely.

struct telnet_telopt_t {
short telopt;
unsigned char us;
unsigned char him;
};

The us field denotes whether your application supporst the telopt
locally. It should be set to TELNET_WILL if you support it and to
TELNET_WONT if you don't. The him field denotes whether the telopt
is supported on the remote end, and should be TELNET_DO if yes and
TELNET_DONT if not.

When definition the telopt table you must include an end marker
entry, which is simply an entry with telopt set to -1. For
example:

static const telnet_telopt_t my_telopts[] = {
{ TELNET_TELOPT_ECHO, TELNET_WILL, TELNET_DONT },
{ TELNET_TELOPT_TTYPE, TELNET_WILL, TELNET_DONT },
{ TELNET_TELOPT_COMPRESS2, TELNET_WONT, TELNET_DO },
{ TELNET_TELOPT_ZMP, TELNET_WONT, TELNET_DO },
{ TELNET_TELOPT_MSSP, TELNET_WONT, TELNET_DO },
{ TELNET_TELOPT_BINARY, TELNET_WILL, TELNET_DO },
{ TELNET_TELOPT_NAWS, TELNET_WILL, TELNET_DONT },
{ -1, 0, 0 }
};

If you need to dynamically alter supported options on a
per-connection basis then you may use a different tables
(dynamically allocated if necessary) per call to telnet_init() or
you share a single constant table like the above example between
all connections if you support a fixed set of options. Most
applications will support only a fixed set of options.

telnet_t *telnet_init(const telnet_telopts_t *telopts,
telnet_event_handler_t handler, unsigned char flags,
void *user_data);
The telnet_init() function is responsible for allocating memory
and initializing the data in a telnet_t structure. It must be
called immediately after establishing a connection and before any
other libtelnet API calls are made.

The telopts field is the telopt support table as described above.

The handler parameter must be a function matching the
telnet_event_handler_t definition. More information about events
can be found in section IId.

The user_data parameter is passed to the event handler whenver it
is invoked. This will usually be a structure container
information about the connection, including a socket descriptor
for implementing TELNET_EV_SEND event handling.

The flags parameter can be any of the following flag constants
bit-or'd together, or 0 to leave all options disabled.

TELNET_FLAG_PROXY
Operate in proxy mode. This disables the RFC1143 support and
enables automatic detection of COMPRESS2 streams.

If telnet_init() fails to allocate the required memory, the
returned pointer will be zero.

void telnet_free(telnet_t *telnet);
Releases any internal memory allocated by libtelnet for the given
telnet pointer. This must be called whenever a connection is
closed, or you will incur memory leaks. The pointer passed in may
no longer be used afterwards.

IIb. Receiving Data

void telnet_recv(telnet_t *telnet,
const char *buffer, unsigned int size, void *user_data);
When your application receives data over the socket from the
remote end, it must pass the received bytes into this function.

As the TELNET stream is parsed, events will be generated and
passed to the event handler given to telnet_init(). Of particular
interest for data receiving is the TELNET_EV_DATA event, which is
triggered for any regular data such as user input or server
process output.

IIc. Sending Data

All of the output functions will invoke the TELNET_EV_SEND event.

Note: it is very important that ALL data sent to the remote end of
the connection be passed through libtelnet. All user input or
process output that you wish to send over the wire should be given
to one of the following functions. Do NOT send or buffer
unprocessed output data directly!

void telnet_iac(telnet_t *telnet, unsigned char cmd);
Sends a single "simple" TELNET command, such as the GO-AHEAD
commands (255 249).

void telnet_negotiate(telnet_t *telnet, unsigned char cmd,
unsigned char opt);
Sends a TELNET negotiation command. The cmd parameter must be one
of TELNET_WILL, TELNET_DONT, TELNET_DO, or TELNET_DONT. The opt
parameter is the option to negotiate.

Unless in PROXY mode, the RFC1143 support may delay or ellide the
request entirely, as appropriate. It will ignore duplicate
invocations, such as asking for WILL NAWS when NAWS is already on
or is currently awaiting response from the remote end.

void telnet_send(telnet_t *telnet, const char *buffer, size_t size);
Sends raw data, which would be either the process output from a
server or the user input from a client.

For sending regular text is may be more convenient to use
telnet_printf().

void telnet_begin_subnegotiation(telnet_t *telnet, unsigned char
telopt);
Sends the header for a TELNET sub-negotiation command for the
specified option. All send data following this command will be
part of the sub-negotiation data until a call is made to
telnet_finish_subnegotiation().

You should not use telnet_printf() for sending subnegotiation
data as it will perform newline translations that usually do not
need to be done for subnegotiation data, and may cause problems.

void telnet_finish_subnegotiation(telnet_t *telnet);
Sends the end marker for a TELNET sub-negotiation command. This
must be called after (and only after) a call has been made to
telnet_begin_subnegotiation() and any negotiation data has been
sent.

void telnet_subnegotiation(telnet_t *telnet, unsigned char telopt,
const char *buffer, unsigned int size);
Sends a TELNET sub-negotiation command. The telopt parameter is
the sub-negotiation option.

Note that this function is just a shorthand for:
telnet_begin_sb(telnet, telopt);
telnet_send(telnet, buffer, size);
telnet_end_sb(telnet);

For some subnegotiations that involve a lot of complex formatted
data to be sent, it may be easier to make calls to both
telnet_begin_sb() and telnet_finish_sb() and using telnet_send()
or telnet_printf2() to format the data.

NOTE: telnet_subnegotiation() does have special behavior in
PROXY mode, as in that mode this function will automatically
detect the COMPRESS2 marker and enable zlib compression.

int telnet_printf(telnet_t *telnet, const char *fmt, ...);
This functions very similarly to fprintf, except that output is
sent through libtelnet for processing. IAC bytes are properly
escaped, C newlines (\n) are translated into CR LF, and C carriage
returns (\r) are translated into CR NUL, all as required by
RFC854. The return code is the length of the formatted text.

NOTE: due to an internal implementation detail, the maximum
lenth of the formatted text is 4096 characters.

int telnet_printf2(telnet_t *telnet, const char *fmt, ...);
Identical to telnet_printf() except that \r and \n are not
translated. This should be used if you are attempting to send
raw data inside a subnegotiation or if you have already manually
escaped newlines.

void telnet_format_sb(telnet_t *telnet, unsigned char telopt,
size_t count, ...);
This is a helper function for sending the specially formatted
data used in the TTYPE, ENVIRON/NEW-ENVIRON, and MSSP telopt
subnegotiations.

The variadic arguments must be given as a series of pairs of
markers and strings. The markers are different for each telopt;
they are defined in libtelnet.h and include:

/* TTYPE markers */
#define TELNET_TTYPE_IS 0
#define TELNET_TTYPE_SEND 1

/* ENVIRON/NEW-ENVIRON markers */
#define TELNET_ENVIRON_IS 0
#define TELNET_ENVIRON_SEND 1
#define TELNET_ENVIRON_INFO 2
#define TELNET_ENVIRON_VAR 0
#define TELNET_ENVIRON_VALUE 1
#define TELNET_ENVIRON_ESC 2
#define TELNET_ENVIRON_USERVAR 3

/* MSSP markers */
#define TELNET_MSSP_VAR 1
#define TELNET_MSSP_VAL 2

So to send a TTYPE subnegotiation from the server (just an IS
command), you would use:

telnet_format_sb(&telnet, TELNET_TELOPT_TTYPE, 1,
TELNET_TTYPE_SEND);

The client response for an xterm-compatible terminal would be:

telnet_format_sb(&telnet, TELNET_TELOPT_TTYPE, 1,
TELNET_TTYPE_IS, "xterm");

For more information on the meaning of the markers and strings,
please refer to the specific RFC for the telopt in question.

IId. Event Handling

libtelnet relies on an event-handling mechanism for processing the
parsed TELNET protocol stream as well as for buffering and sending
output data.

When you initialize a telnet_t structure with telnet_init() you had
to pass in an event handler function. This function must meet the
following prototype:

void (telnet_t *telnet, telnet_event_t *event, void *user_data);

The event structure is detailed below. The user_data value is the
pointer passed to telnet_init().

struct telnet_event_t {
const char *buffer;
unsigned int size;
telnet_event_type_t type;
unsigned char command;
unsigned char telopt;
unsigned char accept;
};

The enumeration values of telnet_event_type_t are described in
detail below. Whenever the the event handler is invoked, the
application must look at the event->type value and do any necessary
processing.

The only event that MUST be implemented is TELNET_EV_SEND. Most
applications will also always want to implement the event
TELNET_EV_DATA.

Here is an example event handler implementation which includes
handlers for several important events.

void my_event_handler(telnet_t *telnet, telnet_event_t *ev,
void *user_data) {
struct user_info *user = (struct user_info *)user_data;

switch (ev->type) {
case TELNET_EV_DATA:
process_user_input(user, event->buffer, event->size);
break;
case TELNET_EV_SEND:
write_to_descriptor(user, event->buffer, event->size);
break;
case TELNET_EV_ERROR:
fatal_error("TELNET error: %s", event->buffer);
break;
}
}

TELNET_EV_DATA:
The DATA event is triggered whenever regular data (not part of any
special TELNET command) is received. For a client, this will be
process output from the server. For a server, this will be input
typed by the user.

The event->buffer value will contain the bytes received and the
event->size value will contain the number of bytes received. Note
that event->buffer is not NUL terminated!

NOTE: there is no guarantee that user input or server output
will be received in whole lines. If you wish to process data
a line at a time, you are responsible for buffering the data and
checking for line terminators yourself!

TELNET_EV_SEND:
This event is sent whenever libtelnet has generated data that must
be sent over the wire to the remove end. Generally that means
calling send() or adding the data to your application's output
buffer.

The event->buffer value will contain the bytes to send and the
event->size value will contain the number of bytes to send. Note
that event->buffer is not NUL terminated, and may include NUL
characters in its data, so always use event->size!

NOTE: Your SEND event handler must send or buffer the data in
its raw form as provided by libtelnet. If you wish to perform
any kind of preprocessing on data you want to send to the other

TELNET_EV_IAC:
The IAC event is triggered whenever a simple IAC command is
received, such as the IAC EOR (end of record, also called go ahead
or GA) command.

The command received is in the event->command value.

The necessary processing depends on the specific commands; see
the TELNET RFC for more information.

TELNET_EV_WILL:
TELNET_EV_DO:
The WILL and DO events are sent when a TELNET negotiation command
of the same name is received.

WILL events are sent by the remote end when they wish to be
allowed to turn an option on on their end, or in confirmation
after you have sent a DO command to them.

DO events are sent by the remote end when they wish for you to
turn on an option on your end, or in confirmation after you have
sent a WILL command to them.

In either case, the TELNET option under negotiation will be in
event->telopt field.

If you support the option and wish for it to be enabled you must
set the event->accept field to 1, unless this event is a
confirmation for a previous WILL/DO command you sent to the remote
end. If you do not set event->field to 1 then libtelnet will send
a rejection command back to the other end.

libtelnet manages some of the pecularities of negotiation for you.
For information on libtelnet's negotiation method, see:

http://www.faqs.org/rfcs/rfc1143.html

Examples:

You want remote end to use TTYPE, so you send DO TTYPE.
Remote accepts and sends WILL TTYPE.

Remote end wants you to use SGA, so they send DO_SGA.
You do not support SGA and set event->accept = 0.

Remote end wants to use ZMP, so they send WILL ZMP.
You support ZMP, so you set event->accept = 1 and enable
local ZMP support.

You want to use MCCP2, so you send WILL COMPRESS2.
Remote end accepts and sends DO COMPRESS2.

Note that in PROXY mode libtelnet will do no processing of its
own for you.

TELNET_EV_WONT:
TELNET_EV_DONT:
The WONT and DONT events are sent when the remote end of the
connection wishes to disable an option, when they are refusing to
a support an option that you have asked for, or in confirmation of
an option you have asked to be disabled.

Most commonly WONT and DONT events are sent as rejections of
features you requested by sending DO or WILL events. Receiving
these events means the TELNET option is not or will not be
supported by the remote end, so give up.

Sometimes WONT or DONT will be sent for TELNET options that are
already enabled, but the remote end wishes to stop using. You
cannot decline. These events are demands that must be complied
with. libtelnet will always send the appropriate response back
without consulting your application. These events are sent to
allow your application to disable its own use of the features.

In either case, the TELNET option under negotiation will be in
event->telopt field.

Note that in PROXY mode libtelnet will do no processing of its
own for you.

TELNET_EV_SUBNEGOTIATION:
Triggered whenever a TELNET sub-negotiation has been received.
Sub-negotiations include the NAWS option for communicating
terminal size to a server, the NEW-ENVIRON and TTYPE options for
negotiating terminal features, and MUD-centric protocols such as
ZMP, MSSP, and MCCP2.

The event->telopt value is the option under sub-negotiation. The
remaining data (if any) is passed in event->buffer and
event->size. Note that most subnegotiation commands can include
embedded NUL bytes in the subnegotiation data, and the data
event->buffer is not NUL terminated, so always use the event->size
value!

The meaning and necessary processing for subnegotiations are
defined in various TELNET RFCs and other informal specifications.
A subnegotiation should never be sent unless the specific option
has been enabled through the use of the telnet negotiation
feature.

TTYPE/ENVIRON/NEW-ENVIRON/MSSP SUPPORT:
These telopts all use a similar format to their subnegotiation
requests. The data is arrnaged as a series of terms, with each
term beginning with a single byte type marker (a small integer in
the range of 0 to 3) followed by zero or more bytes until another
type marker or the end of the subnegotiation data.

libtelnet parses these. The number of terms found is put in the
ev->argc field. The terms themselves are stored as
NUL-terminated strings in the ev->argv array. The type byte is
always the first byte of these strings, e.g. ev->argv[0][0]. Due
to the fact that 0 is a valid type marker, remember that
accessing the remainder of the term's data as a string must be
done as &ev->argv[term_index][1].

Note that libtelnet does not support the ESC byte for ENVIRON/
NEW-ENVIRON. Data using escaped bytes will not be parsed
correctly.

ZMP SUPPORT:
The event->argc field is the number of ZMP parameters, including
the command name, that have been received. The event->argv field
is an array of strings, one for each ZMP parameter. The command
name will be in event->argv[0]. If the ZMP command could not be
parsed because it was malformed, event->argc will be 0 (zero) and
event->argv will be NULL.

TELNET_EV_COMPRESS
The COMPRESS event notifies the app that COMPRESS2/MCCP2
compression has begun or ended. Only servers can send compressed
data, and hence only clients will receive compressed data.

The event->command value will be 1 if compression has started and
will be 0 if compression has ended.

TELNET_EV_WARNING
The WARNING event is sent whenever something has gone wrong inside
of libtelnet (possibly due to malformed data sent by the other
end) but which recovery is (likely) possible. It may be safe to
continue using the connection, but some data may have been lost or
incorrectly interpreted.

The event->buffer value will contain a NUL terminated string
explaining the error, and the event->size value containers the
length of the string.

TELNET_EV_ERROR
Similar to the WARNING event, the ERROR event is sent whenever
something has gone wrong. ERROR events are non-recoverable,
however, and the application should immediately close the
connection. Whatever has happened is likely going only to result
in garbage from libtelnet. This is most likely to happen when a
COMPRESS2 stream fails, but other problems can occur.

The event->buffer value will contain a NUL terminated string
explaining the error, and the event->size value containers the
length of the string.

III. INTEGRATING LIBTELNET WITH COMMON MUDS
=====================================================================

FIXME: fill in some notes about how to splice in libtelnet with
common Diku/Merc/Circle/etc. MUD codebases.

IV. SAFETY AND CORRECTNESS CONSIDERATIONS
=====================================================================

Your existing application may make heavy use of its own output
buffering and transmission commands, including hand-made routines for
sending TELNET commands and sub-negotiation requests. There are at
times subtle issues that need to be handled when communication over
the TELNET protocol, not least of which is the need to escape any
byte value 0xFF with a special TELNET command.

For these reasons, it is very important that applications making use
of libtelnet always make use of the libtelnet output functions for
all data being sent over the TELNET connection.

In particular, if you are writing a client, all user input must be
passed through to telnet_send(). This also includes any input
generated automatically by scripts, triggers, or macros.

For a server, any and all output -- including ANSI/VT100 escape
codes, regular text, newlines, and so on -- must be passed through to
telnet_send().

Any TELNET commands that are to be sent must be given to one of the
following: telnet_iac, telnet_negotiate, or telnet_subnegotiation().

If you are attempting to enable COMPRESS2/MCCP2, you must use the
telnet_begin_compress2() function.

V. MCCP2 COMPRESSION
=====================================================================

The MCCP2 (COMPRESS2) TELNET extension allows for the compression of
all traffic sent from server to client. For more information:

http://www.mudbytes.net/index.php?a=articles&s=mccp

In order for libtelnet to support MCCP2, zlib must be installed and
enabled when compiling libtelnet. Use -DHAVE_ZLIB to enable zlib
when compiling libtelnet.c and pass -lz to the linker to link in the
zlib shared library.

libtelnet transparently supports MCCP2. For a server to support
MCCP2, the application must begin negotiation of the COMPRESS2 option
using telnet_negotiate(), for example:

telnet_negotiate(&telnet, TELNET_WILL,
TELNET_OPTION_COMPRESS2, user_data);

If a favorable DO COMPRESS2 is sent back from the client then the
server application can begin compression at any time by calling
telnet_begin_compress2().

If a connection is in PROXY mode and COMPRESS2 support is enabled
then libtelnet will automatically detect the start of a COMPRESS2
stream, in either the sending or receiving direction.

VI. ZENITH MUD PROTOCOL (ZMP) SUPPORT
=====================================================================

The Zenith MUD Protocol allows applications to send messages across
the TELNET connection outside of the normal user input/output data
stream. libtelnet offers some limited support for receiving and
sending ZMP commands to make implementing a full ZMP stack easier.
For more information on ZMP:

http://zmp.sourcemud.org/

For a server to enable ZMP, it must send the WILL ZMP negotitaion:

telnet_negotiate(&telnet, TELNET_WILL, TELNET_TELOPT_ZMP);

For a client to support ZMP it must include ZMP in the telopt table
passed to telnet_init(), with the him field set to TELNET_DO:

{ TELNET_TELOPT_ZMP, TELNET_WONT, TELNET_DO },

Note that while ZMP is a bi-directional protocol, it is only ever
enabled on the server end of the connection. This automatically
enables the client to send ZMP commands. The client must never
attempt to negotiate ZMP directly using telnet_negotiate().

Once ZMP is enabled, any ZMP commands received will automatically be
sent to the event handler function with the TELNET_EV_SUBNEGOTIATION
event code. The command will automatically be parsed and the ZMP
parameters will be placed in the event->argv array and the number of
parameters will be placed in the event->argc field.

NOTE: if an error occured while parsing the ZMP command because it
was malformed, the event->argc field will be equal to 0 and the
event->argv field will be NULL. You should always check for this
before attempting to access the parameter array.

To send ZMP commands to the remote end, use either telnet_send_zmp()
or telnet_send_zmpv().

int telnet_send_zmp(telnet_t *telnet, size_t argv,
const char **argv);
Sends a ZMP command to the remote end. The argc parameter is the
number of ZMP parameters (including the command name!) to be sent.
The argv parameter is an array of strings containing the
parameters. The element in argv[0] is the command name itself.
The argv array must have at least as many elements as the value
argc.

VII. TELNET PROXY UTILITY
=====================================================================

The telnet-proxy utility is a small application that serves both as a
testbed for libtelnet and as a powerful debugging tool for TELNET
servers and clients.

To use telnet-proxy, you must first compile it using:

$ make

If you do not have zlib installed and wish to disable MCCP2 support
then you must first edit the Makefile and remove the -DHAVE_ZLIB and
the -lz from the compile flags.

To run telnet-proxy, you simply give it the server's host name or IP
address, the server's port number, and the port number that
telnet-proxy should listen on. For example, to connect to the server
on mud.example.com port 7800 and to listen on port 5000, run:

$ ./telnet-proxy mud.example.com 7800 5000

You can then connect to the host telnet-proxy is running on (e.g.
127.0.0.1) on port 500 and you will automatically be proxied into
mud.example.com.

telnet-proxy will display status information about the data passing
through both ends of the tunnel. telnet-proxy can only support a
single tunnel at a time. It will continue running until an error
occurs or a terminating signal is sent to the proxy process.