To avoid the situation where the receiving entity confuses 7 binary zero pad
bits as the @ character, the carriage return or <CR> character shall be used
for padding in this situation.
If the datalink fails or if handover or assignment to a new channel fails,
it is re-establised by sending SABM again. The length of establish message
is 0 in this case. The length is used to differentiate between
re-establishment and contention resolution, which has to be handled
differently.
See TS 04.06 Chapter 5.4.2.1
It is impossible that the snprintf will fill the entire namebuf
but just follow the idiom to make sure it is null terminated.
Related: Coverity CID 1040676
These routines were not freeing vectors used for the lookup. On
review it is fixing another path not detected by coverity.
The danger is a double free in tab completion now. It is difficult
to test this.
Fixes: Coverity CID 23037, CID 23038
The &buf[3] is unlikely to be aligned properly. Use memcpy instead
of an assignment. Add a small testcase that verifies that I didn't
mess up the conversion.
Alignment trap: osmo-nitb (3293) PC=0x492b7094 Instr=0xe5803003 Address=0xbeb259db FSR 0x801
This already came up during review but now that Coverity complains
about it as well, let us just remove it. The variable is unsigned
so it can never be < 0.
Fixes: Coverity CID 1040669.
If the BTS tells us to not send any data at all anymore (bucket leak
rate of 0 bits per second), then we should respect this and not run into
a divide-by-zero. However, as this indicates complete overload, we
print a log message to that regard.
When a SABM(E) frame arrives, we have to trim the L2 padding (0x2b for
gsm) before handing the data off to L3, just like we do with I frames.
Also, we should use mggb_trim() or even msgb_l3trim() instead of
manually fiddling with msgb->length and ->tail pointers.
After reception of SABM, the network responds with UA and enters the
establised multiframe state. If UA is not received by mobile, the SABM
is transmitted again, and the network must respond with UA again, unless
it is from a different mobile.
Add LAPDm collision test (contention resolution on network side).
Only the Gb library relies on having undefined references to a
symbol that needs to be provided by the host application. For
all other libraries we can link with -no-undefined.
Seems the script I used to parse those had a bug where range of
bits in the 'decreasing' direction ( like 6..0 ) were not processed
properly.
Thanks to Andreas for noticing this !
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Commit cd6ed82d1f made "EVERYTHING"
map to LOGL_DEBUG but when writing out the configuration the following
would be written:
logging level all unknown 0x0
This happend because no string was found for the value 0. Address it
by adding a legacy check for 0 and write out the str from the index
0. Currently this is "EVERYTHING".
The log target can be used via log alarms and show alarms.
Why? This feature was proposed/requested at
http://openbsc.osmocom.org/trac/wiki/Tasks/ErrorLogTarget
All messages use the same amount of space, prioritizing simplicity.
The log target can be used via log alarms and show alarms.
Why? This feature was proposed/requested at
http://openbsc.osmocom.org/trac/wiki/Tasks/ErrorLogTarget
All messages use the same amount of space, prioritizing simplicity.
As Holger points out "logging level XXX everything" wasn't working, as
it sets category->loglevel to 0, which is checked in osmo_vlogp() and
will never get logged.
This hides HIDDEN or DEPRECATED commands from showing up when the
full list of commands is inquired with '?' at any given point in the
command tree. Only if the hidden/deprecated command is already typed
in partially, then it will still tab-complete.
this will avoid printing 'abis_nm.c' as the filename in the log, which
is pretty useless during debugging. We want to know where
abis_nm_debugp_foh() is being used from, not where it is implemented.
We used 1ULL at one place and not the other ... at the same time,
we now use (uintXX_t) so that the proper type is used each time.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
getaddrinfo returns EAI_SERVICE (-8) if that combination is used.
More information available in here:
http://sourceware.org/bugzilla/show_bug.cgi?id=15015
Reported by Holger Hans Peter Freyther.
While at it, this patch also removes hints.ai_flags = 0 as memset
to zero already happened just a bit before that.
This is essentially http://patchwork.diac24.net/patch/271/ forward
ported to libosmovty
Original-by: Paul Jakma <paul@quagga.net>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
The second loop in osmo_revbytebits_buf() in src/bits.c grabs
4 bytes each iteration, which can easily go past the supplied
input in some cases.
Compiled with -fstack-protector , I get a "stack smashing detected"
in the bits test.
From: Nils O. Selåsdal <noselasd@fiane.dyndns.org>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
This was found while implementing handover on a sysmobts. When we
receive a channel release request for a channel that was never really
activated (set_lapdm_context() was not called) we segfault in
lapd_recv_dlsap().
We now return early with -EINVAL in rslms_rx_rll() if we receive a
message that assumes set_lapdm_context() was already called.
These are:
* RSL_MT_UNIT_DATA_REQ
* RSL_MT_DATA_REQ
* RSL_MT_SUSP_REQ
* RSL_MT_REL_REQ
A test case was added to trigger the issue.
GCC 4.7.2 was already smart enough to see that the table is const
so there is no change in the generated assembly code. For some reason
the dispatch is still going through one relocation.
When OpenBSC is handling more than one message at a time it is difficult
to see which log message belongs to which SMR instance. Introduce a
uint64_t id that can be set to the row_id/message_id and prefix all
log messages with SMR(ID).
This change is ABI and API incompatible with previous versions of
libosmogsm.
When OpenBSC is handling more than one message at a time it is difficult
to see which log message belongs to which SMC. Introduce a uint64_t id
that can be set to the row_id/message_id and prefix all log messages
with SMC(ID).
This change is ABI and API incompatible with previous versions of
libosmogsm.
Example:
SMC(100) instance created
SMC(100) message MNSMS-EST-REQ received in state IDLE
When the connection may not released print the name of the current
state to ease with debugging and verification that this is not a
valid state transition.
Use FreeBSD struct iphdr definition for OSX also. From the commentary in
the source file:
On BSD the IPv4 struct is called struct ip and instead of iXX
the members are called ip_XX. One could change this code to use
struct ip but that would require to define _BSD_SOURCE and that
might have other complications. Instead make sure struct iphdr
is present on FreeBSD.
Prior to this fix, a persistent file or syslog log configuration
didn't work across an application re-start, as the
"logging filter all 1" was never saved and thus no messages were
logged.
Introduce a print_filename attribute for each logtarget. Initialize it
with 1 to be backward compatible with earlier versions. The bit is taken
from an existint bitfield. There were at least six bits left of the byte.
Include ctype.h to have a declaration of tolower.
utils.c: In function 'vty_cmd_string_from_valstr':
utils.c:95:6: warning: implicit declaration of function 'tolower' [-Wimplicit-function-declaration]
The comment explains why we don't care about the content of z,
stop storing it.
gsm_utils.c: In function 'gsm_7bit_encode':
gsm_utils.c:253:13: warning: variable 'z' set but not used [-Wunused-but-set-variable]
Applications should keep the log area in a static const area. Mark
the pointer as const to address compiler warnings in OpenBSC, cast
the const away for the osmo_log_info as it is not declared as const.
* add more comments on units of struct members
* make sure to parsre FC-BVC message correctly
* add error message in case user passes PDU larger than bucket size
* add new function to initialize flow control struct
This code is supposed to implement the BSSGP flow control algorithm,
both for the per-BSS and for the per-MS flow control.
The code currently has no test cases, they will come in a separate
commit.
This was fixed in 9c3dc90d16a40789081c84e46620f4d66689fec1 of
openbsc.git, after the sms code had been migrated here:
introduce HAVE_TM_GMTOFF_IN_TM
Not all architectures have the tm.tm_gmtoff member. This fixes cygwin builds.
The OpenSUSE build is not happy about the uint8_t to uint8_t*
assignment. As the suspend_ref is a mandatory field we can make
it a plain uint8_t. Increase the LIBVERSION as the ABI has changed.
When building the doxygen documentation do not remove the other
VTY documentation files in the doc/vty folder. Create a command
that can be installed to dump all nodes and commands as XML on
the given VTY. Create a schema for the XML file and a XSL-T script
that can merge the generated file with additional information.
This is a 24bit integer value, and thus we need to encode the three
least significant octets of the network-byte-order 32bit value, not the
three most significant octets.
Holger wrote that function and I made the logging version of it. The
header was copied during the separation of backtrace.c from gsm_utils.c
in the past, and of course gsm_utils.c had more people involved...
I recently discovered that we can only print backtraces to stdout, which
is of course useless in a daemon environment. We'd rather want to use
the libosmocore logging framework instead.
This new TLV type is specific to TS 44.318. Contrary to the TvLV type
of TS 08.16/08.18, it has an inverted meaning of the extension (0x80)
bit:
* if the extension bit is not set, 1-byte length
* if the extension bit is set, 2-byte length
Futhermore, it has support for variable-length tags, where the tag part
can be optionally two bytes in length. As this esoteric option hasn't
been seen in the wild yet, we only add encoding support but skip
decoding for now.
Make sure the declaration and definition match, add const to
the functions called by logp/logp2.
Compile output:
logging.c:317: error: conflicting types for 'logp'
../include/osmocom/core/logging.h:34: note: previous declaration of 'logp' was here
logging.c:327: error: conflicting types for 'logp2'
../include/osmocom/core/logging.h:168: note: previous declaration of 'logp2' was here
make[3]: *** [logging.lo] Error 1
This actually allows for the user to override the decision and at the
same time supports compilers that might not be able to use -fPIC at
all.
Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.eu>
no_password_check was the only initialized, non-relocated data in the
set of libraries, inverting its logic let us keep it in .bss
(non-initialized data, which is mapped to the zero page).
Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.eu>
When declaring them constant, they are written on the .rodata section
instead of .data, which means that they can be mapped directly from
disk to memory.
Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.eu>
The old method used raw writes to the telnet FD, which is bad for
several reasons:
a) we don't know if we can actually write that many bytes to the
socket at the given time
b) the socket is still in blocking mode, so we could stall the entire
process
c) there may be weird interaction with the buffered writes of the
vty_out
Now, the print_welcome() functionality has moved to vty_hello() instead,
where we can use normal vty_out() in buffered mode.
This commit is expected to fix the garbled welcome message on arm-eglibc
targets.
It might still be a good idea to migrate the entire telnet interface to
libtelnet - but at some later time ;)
There is now a "libosmogsm.map" file containing an explicit list of
to-be-exported symbols. This should prevent us from leaking non-static
symbols into the global namespace.
A similar scheme should be adopted by all other osmocom libraries
No idea where I copied the original from but here we use the
other notation. (matches wikipedia and sources)
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Rather than manually hard-coding numbers and using byte-arrays, we use
the msgb_*_{push,put}() function family of libosmocore/libosmogsm.
This is currently untested.
This code should not play with the internals of the msgb like this,
this code got introduced in af48bed556 and is breaking the
osmo-bts usecase of forwarding an RSL message.
Add a test case that fails without the new code. I would prefer if
we could get rid of the manipulating the msgb like this, it is prone
to errors like this one.
DATA REQ with a msgb_l3len(msg) == 0 message does not make any
sense, log an error and return immediately before attempting to
send an empty I frame in lapd_send_i.
If a sequence error is received, the N(R) variable must still be used to
acknowledge previously transmitted frames.
If there are two subsequent sequence errors received, ignore it. (Ignore
every second subsequent error.) This happens if our reply with the REJ is
too slow, so the remote gets a T200 timeout and sends another frame with
a sequence error. Test showed that replying with two subsequent REJ
messages could the remote L2 process to abort. Replying too slow shouldn't
happen, but may happen over serial link between BB and LAPD.
Written-by: Andreas.Eversberg <jolly@eversberg.eu>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Note that this breaks the ABI and the low level API. But it shouldn't
break the high level API, nor the conv code definitions (because fields
default to 0, and for new fields '0' is the previous behavior)
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
This should have been done with 1dd7c84733
but somehow was missed and only applied to the 'finish' method and
not the 'scan' method.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
As it turns out, the previous fix didn't cover the case of a
timer X being re-scheduled inside a timer call back expiring at
the same time as the previous X instance.
Written-by: Pablo Neira Ayuso <pablo@gnumonks.org>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
The SMR process is used to transfer SMS TPDUs. It is now extracted from
OpenBSC. It includes a real state machine now for easier debugging.
Also it implements the TR1M and TR2M timers. The memory notification
procedure is missing, but not required for network side.
Written-by: Andreas Eversberg <jolly@eversberg.eu>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
The SMC process is used to transfer RP frames. It is now extracted from
OpenBSC. It includes a real state machine now for easier debugging.
Written-by: Andreas Eversberg <jolly@eversberg.eu>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
This is part of a set of commit to fix LAPDm to handle datalink
connection on ACCH (SAPI 3)
This is required to transfer SMS on SACCH of TCH/f or SDCCH/8 (4).
Written-by: Andreas Eversberg <jolly@eversberg.eu>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Timing advance and power level indicated by MS (measurement reports)
and BTS (SI 5/6) are now stored for use at ACCH data link connection.
This is part of a set of commit to fix LAPDm to handle datalink
connection on ACCH (SAPI 3)
This is required to transfer SMS on SACCH of TCH/f or SDCCH/8 (4).
Written-by: Andreas Eversberg <jolly@eversberg.eu>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
This is part of a set of commit to fix LAPDm to handle datalink
connection on ACCH (SAPI 3)
This is required to transfer SMS on SACCH of TCH/f or SDCCH/8 (4).
Written-by: Andreas Eversberg <jolly@eversberg.eu>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
This is part of a set of commit to fix LAPDm to handle datalink
connection on ACCH (SAPI 3)
This is required to transfer SMS on SACCH of TCH/f or SDCCH/8 (4).
Written-by: Andreas Eversberg <jolly@eversberg.eu>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
When using ^D at config nodes above the CONFIG_NODE, the
go_parent_cb function is used to go down by one node. This
is equivalent to "exit" command.
Written-by: Andreas.Eversberg <jolly@eversberg.eu>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
See kernel commit 4b324126e0c6c3a5080ca3ec0981e8766ed6f1ee
----
Furthermore, notice that the initial checks:
if (!node->rb_left)
child = node->rb_right;
else if (!node->rb_right)
child = node->rb_left;
else
{
...
}
guarantee that old->rb_right is set in the final else branch, therefore
we can omit checking that again.
Signed-off-by: Wolfram Strepp <wstrepp@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
----
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
See kernel commit 4c60117811171d867d4f27f17ea07d7419d45dae
----
There are two cases when a node, having 2 childs, is erased:
'normal case': the successor is not the right-hand-child of the node to be erased
'special case': the successor is the right-hand child of the node to be erased
Here some ascii-art, with following symbols (referring to the code):
O: node to be deleted
N: the successor of O
P: parent of N
C: child of N
L: some other node
normal case:
O N
/ \ / \
/ \ / \
L \ L \
/ \ P ----> / \ P
/ \ / \
/ /
N C
\ / \
\
C
/ \
special case:
O|P N
/ \ / \
/ \ / \
L \ L \
/ \ N ----> / C
\ / \
\
C
/ \
Notice that for the special case we don't have to reconnect C to N.
Signed-off-by: Wolfram Strepp <wstrepp@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
----
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
See kernel commit 16c047add3ceaf0ab882e3e094d1ec904d02312d
----
First, move some code around in order to make the next change more
obvious.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Wolfram Strepp <wstrepp@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
----
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
See kernel commit 55a63998b8967615a15e2211ba0ff3a84a565824
----
Tfour 4 redundant if-conditions in function __rb_erase_color() in
lib/rbtree.c are removed.
In pseudo-source-code, the structure of the code is as follows:
if ((!A || B) && (!C || D)) {
.
.
.
} else {
if (!C || D) {//if this is true, it implies: (A == true) && (B == false)
if (A) {//hence this always evaluates to 'true'...
.
}
.
//at this point, C always becomes true, because of:
__rb_rotate_right/left();
//and:
other = parent->rb_right/left;
}
.
.
if (C) {//...and this too !
.
}
}
Signed-off-by: Wolfram Strepp <wstrepp@gmx.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrea Arcangeli <andrea@qumranet.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
----
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
See kernel commit f4b477c47332367d35686bd2b808c2156b96d7c7
----
The 'rb_first()', 'rb_last()', 'rb_next()' and 'rb_prev()' calls
take a pointer to an RB node or RB root. They do not change the
pointed objects, so add a 'const' qualifier in order to make life
of the users of these functions easier.
Indeed, if I have my own constant pointer &const struct my_type *p,
and I call 'rb_next(&p->rb)', I get a GCC warning:
warning: passing argument 1 of ?~@~Xrb_next?~@~Y discards qualifiers from pointer target type
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
----
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
alloca.h is not available on FreeBSD, use the default autoconf
function to check for it, there is a complete list[1] of what to
do for using alloca but let us see how far we get with this test.
Include netinet/in.h for the IPv4 and IPv6 socket address. Check
for dlopen in libraries and use this instead of linking -dl.
[1] http://www.gnu.org/s/hello/manual/autoconf/Particular-Functions.html
With the new generated headers for the CRC code, we need to include
the builddir as well in case we're building out of tree.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
This patch adds RB-tree based timers which scales better than the
previous list-based implementation.
It does not require any API changes. It breaks ABI because the
osmo_timer_list structure has changed though (to avoid this in
the future, we can put internal data in some private structure).
The following table summarizes the worst-case computational complexity
of this new implementation versus the previous one:
rb-tree list-based
------- ----------
calculate next timer to expire O(1) O(n)
insertion of new timer O(log n) O(n)
deletion of timer O(log n) O(1)
timer-fired scheduler O(log n) O(3n)
The most repeated cases are:
* the calculation of the next timer to expire, that happens in every
loop of our select function.
* the timer-fired scheduler execution.
This new implementation only loses in the deletion of timer scenario,
this happens because we may need to rebalance the tree after the
removal.
So I think there is some real gain if we have some situation in which
we have to handle lots of timers.
This patch adds red black trees implementation to libosmocore.
This data structure is very useful to search for elements in
ordered sets in O(log n) instead of O(n) that lists provide.
The first client of this code will be one follow up patch that
implements rbtree-based timer scheduler.
Instead of mixing together the GSM layer 1 interface and RSL interface
with the implementation of LAPD, the core function of LAPD is now
extracted from LAPDm. The core implementation is now in lapd_core.c
and lapd_core.h respectively.
The lapd_core.c implements exactly one datalink instance for one SAP.
The surrounding implementation "lapdm.c" codes/decodes the layer 2
headers and handles multiplexing and datalink instances, as well as
translates primitives from/to RSL layer.
lapd_core.c can now be used for other LAPD implementations. (ISDN/ABIS)
As it turns out, the other range were affected too, so Anreas wrote
the fix for them as well.
Written-by: Andreas.Eversberg <jolly@eversberg.eu>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
From the mail:
---
appended is another patch for fixing a bug in the calculation of the
frequency lists. This time the patch is for the "Range 256 format".
The problem is that the operand for the "smod" operation might be
negative, in this case the simplified version won't work as expected.
In the patch I introduced a separate function for "smod" which takes
care of the sign. I have not yet checked if the other formats are also
affected, this would be the case if the "smod" operand can be negative.
There might be other solutions to fix the problem without the need
for a separate function, however I have not thought further about it.
A test vector is the following frequency list ("Range 256 format",
first byte is the length):
09 8b 1c 83 8c 15 ef 02 2d 30
The correct ARFCNs are
569 571 576 578 586 608 712 715 719
The uncorrected version would instead return:
444 457 460 464 569 576 578 586 608
This means four ARFCNs are wrong which will cause problems if for
example the frequency list contains the ARFCNs for hopping.
----
Written-by: Dieter Spaar <spaar@mirider.augusta.de>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Additionally it wasn't possible to send concatenated sms from the vty.
To send multiple sms, it is necessary to use padding bits and add a user_data_header.
Therefore the gsm_7bit_encode function was splitted to gsm_7bit_encode and gsm_septets2octets.
gsm_septets2octets: this is the old gsm_7bit_encode function + additional padding parameter
Additionally the gsm_7bit_decode function was modified to take account for the user_data_header.
With the new gsm_get_octet_len function you can get the octet length for a given septet length.
I also added several sms tests.
* All loging prefixes in libraries should be DL like DLINP
* All signals / subsystems should be called S_L_* SS_L_*
* All command nodes should be called L_*_NODE
This makes sure existinc code still compiles as expected
This adds the libosmo-abis logging subsystems to libosmocore,
it uses the new change that harald proposed based on negative
numbers for library logging subsystems.
In snprinftf the size is a size_t (unsigned) in case we want
to write more than we have available, len_remain will be < 0.
This was spotted while removing hexdump from simtrace and comparing
it to our implementation.
int snprintf(char *str, size_t size, const char *format, ...);
In 8256076722 it was attempted to fix
a bug previously introduced by logging related changes. The problem
is that a va_list can be corrupted after it has been used once, so
we need to va_copy before each successive use.
And if we copy it, we also need to use the copy, and not the original ;)
We do this by using a trick: library-internal log categories use
negative subsystem numbers, which are converted into positive
array indexes at the time of logging.
library-internal log categories need to be knwo at compile-time,
while application-specified categories now are of unlimited number,
as they are dynamically allocated.
This extends the socket infrastructure in libosmocore to allow
to create non-blocking sockets.
Basically, it replaces the connect0_bind1 parameter by one
flags parameter.
and export the underlying raw value_string arrays instead:
abis_nm_obj_class_names / abis_nm_adm_state_names.
This permits the caller to use get_string_value() as well as
get_value_string().
osmo_sock_init_ofd() is a wrapper around osmo_sock_init() which will
take care of initializing and registering a 'struct osmo_fd' for the
newly-created socket.
* use write_queue where applicable
* provide functions that work on raw FD and those with osmo_fd
* add support for multiple gsmtap instances (no global variables)
Harald reported a problem in the logging:
http://lists.osmocom.org/pipermail/openbsc/2011-May/002896.html
Reverting 81e9636454 seems to
fix the problem. However, that workaround looks ugly.
Holger gives us another clue on what was wrong:
http://lists.osmocom.org/pipermail/openbsc/2011-May/002905.html
While digging in the manpage, I found this:
"The functions vprintf(), vfprintf(), vsprintf(), vsnprintf()
are equivalent to the functions printf(), fprintf(), sprintf(),
snprintf(), respectively, except that they are called with a
va_list instead of a variable number of arguments. These functions
do not call the va_end macro. Consequently, the value of ap is
undefined after the call. The application should call va_end(ap)
itself afterwards."
The plan is to collect structs and routines for application
setup and remove many copies of the boilerplate code we have
right now. This starts with routines to ignore certain signals
and the stderr init code.
Increment the age of the library because a new interface was added.
Summary of changes:
s/msg_entry/osmo_config_entry/g
s/msg_entries/osmo_config_list/g
s/msg_entry_parse/osmo_config_list_parse/g
minor glitch included in this patch while I was at it:
-#include "linuxlist.h"
+#include <osmocom/core/linuxlist.h>
This can be helpful where we send GSMTAP messages to the loopback
device (localhost, 127.0.0.1) from where the kernel would then
send ICMP reject packets as nobody is listening on that port.
This patch removes a workaround to fix some strange memory corruption
now that _output() has been completely reworked and we make use of
snprintf appropriately.
This patch reworks _output() to handle snprintf() return value
appropriately and to use one single buffer to build the logging
string, instead of four.
OpenBSC> logging level
all Global setting for all subsystems <----- this description was missing
rll A-bis Radio Link Layer (RLL)
[...]
This problem was introduced by myself in:
"vty: integration with logging framework"
04139f14b6
If the input value is '0' it should not really affect the error
since it's just an indecisive bit. We accept this either an internal
'0' (generated via puncture) or as an external '0' (generated via an
external puncturing scheme). A real received bit should never be '0',
it's always gonna be closer to 1 or the other value ...
(thanks to mad@auth.se on the ML for the idea)
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Far from perfect but suits our need thus far.
The viterbi with softbit input is quite cpu-intensive. Since
most received bursts are often mostly error free, you could
use a less cpu intensive algorithm (Fano ?) and with hard bit
input. Then only switch to viterbi soft bit input if the channel
is bad enough to justify it.
Soft output is not implemented as its usefulness for the block
coding is limited.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
This patch moves all GSM-specific definitions to include/osmocom/gsm.
Moreover, the headers in include/osmocore/ have been moved to
include/osmocom/core.
This has been proposed by Harald Welte and Sylvain Munaunt.
Tested with `make distcheck'.
Signed-off-by: Pablo Neira Ayuso <pablo@gnumonks.org>
libosmogsm which is provided by libosmocore.
I have also moved generate_backtrace() to backtrace.c instead
of gsm_utils.c, otherwise the timer and msgfile tests depend on
libosmogsm.
Signed-off-by: Pablo Neira Ayuso <pablo@gnumonks.org>
The logging categories are registered by the applications, like
osmo-nitb, during startup. Thus, the VTY have to provide the logging
commands according to the logging categories that the application
has registered.
Before this patch, the VTY contained the logging categories
hardcoded. Thus, any change in the logging categories by the
application would not be shown by the VTY.
So far, this was not a problem because all applications used the
same logging categories. However, according to what Harald told
me, this may be a problem in the future.
This patch resolve the lack of integration between the logging
framework and the VTY by generating the VTY logging commands
from the logging categories registered.
Since this patch changes one function of the libosmocore API,
it follows another patch for the openbsc application to get in
sync with the new function layout.
I have reworked and renamed the functions:
* log_vty_category_string()
* log_vty_level_string()
to provide the new ones that generate the exact output that VTY
requires.
This patch does not release the memory allocated by
talloc_zero_size() to store the VTY strings for the commands
and the description. I found no exit function that can clean
up resources that were allocated.
It is possible that the queue is cleared after the select
and before the callback for writable is called. Check if
the list is not empty brefore taking an item out of it.
This makes more sense in case you run BCS, SGSN and other components
on the same host. Having multiple telnet sessions with the same
prompt can otherwise be confusing.
There should not be any u_int*_t types in this file, no need
to include this file. It is breaking compilation with the last
x86 build of GNU ARM for GCC 3.4.
This has two benefits:
- All people calling osmo_panic() will have the backtrace
- It makes the thing build in 'target' mode in osmocom-bb
And one downside:
- The osmo_panic handler is now in the backtrace
(I can live with that :)
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Andreas Eversberg
Harald Welte
Sylvain Munaut
Alexander Huemer