when the API user of libosmocores logging infrastructure does not set a
pre-defined logging level in struct log_info_cat, the result would be an
invalid logging level. In order to avoid problems with that and to spare
all the additional .loglevel = LOGL_NOTICE (API users are advised to use
LOGL_NOTICE as default) lines in the user code lets check the logging
level on startup and set LOGL_NOTICE if there is no logging level set.
Change-Id: Ib9e180261505062505fc4605a98023910f76cde6
Related: OS#2577
The pointer *pw is only populated when the the parameter *user is given,
otherwise it remains uninitalized while it is used later when the
previleges are being dropped.
Change-Id: Idec7041e9ea17a252aefbf6fa90091ae17fd4fcd
Fixes: CID#209895
This function offers the highest level of API among all libosmousb
helper functions. It is intended as a one-stop shop for everything
related to grabbing an interface.
Change-Id: I748ded6cc7b73a73625588bd7a34a017a905b6bf
See TS 08.08 section 3.2.1.34 SAPI "n" REJECT:
1) DLCI is a TV element, not V.
2) Cause is a TLV element and we have a special function to encode it.
Change-Id: I033afe556c06427d06ac55c4f78854a45e41aae6
while skipping `0` might be visually pleasant for non-repeating groups, e.g.:
bsc.assignment.completed
it makes metrics parsing very awkward for repeating groups, e.g.:
bts.chreq.total
bts.1.chreq.total
bts.2.chreq.total
and since nobody's going to look at raw statsd stream anyway,
we can live with some extra zeroes
Change-Id: Id294202fbcebe0b6b155c7f267b2da73af20adf4
Previously the interval between stats flushes would slowly increase
which would lead to reporting time jitter and confuse a timescale
database.
Change-Id: I23d8b5157ef8a9833ba16a81d9b28a126f303c30
Reliable monitoring requires regular flush of all stat values, even
if they have not changed. Otherwise (1) the monitoring app has to
maintain state and (2) can go out of sync if it's restarted while
the app is still running.
Change-Id: I04f1e7bdf0d6f20e4f15571e94191de61c47ddad
cfg_stats_interval_cmd() function was (probably mistakenly)
inserted between cfg_stats_reporter_statsd_cmd() and
cfg_no_stats_reporter_statsd_cmd() function which makes no sense.
Move it below the cfg_no_stats_reporter_log_cmd() to follow the order
of the osmo_stats_vty_add_cmds() function calls.
Change-Id: I1ecec7025e95cf5ffc21ae3b1c75cf6da8c58de2
So far we only looked at SW definitions of the card profile. However,
if we have a currently selected application, we also must check
that application for SW definitions.
This breaks ABI and API all over the place, but as there are no
known users beyond osmo-sim-test, this is acceptable.
Change-Id: I3a1d60898529c173f73587e34c155660ba5f5fb1
This is implicitly used by the libosmocore select abstraction, which
might be used in multiple threads at the same time.
Change-Id: I5a3802c94af6ff0315f1553f20870342d51ce726
The signalfd(2) mechanism of Linux allows signals to be delivered
and processed via normal file descriptor I/O. This avoids any of the
usual problems about re-entrancy of signal processing, as signals can
be processed from the osmocom select() loop abstraction just like any
other event.
Change-Id: If8d89dd1f6989e1cd9b9367fad954d65f91ada30
For a process running as root, it may be desirable to drop privileges
down to a normal user before executing an external command. Let's
add a new API function for that.
Change-Id: If1431f930f72a8d6c1d102426874a11b7a2debd9
gsm0503_coding contains AMR decoder functions for HR and FR. Those can
only decode AMR payload frames but not amr DTX frames. Lets add
functionality to detect DTX frames. Also lets add decoding for SID_UPDATE
frames as well as error checking for the SID frame recognition patterns.
Related: OS#2978
Change-Id: I2bbdb39ea20461ca08b2e6f1a33532cb55cd5195
osmo-gsm-tester raised an ASan warning in osmo-bts-trx during execution
of a test with EGPRS enabled and a modem connecting to it (see OS#4483
for full trace):
==12388==ERROR: AddressSanitizer: global-buffer-overflow on address 0x7fa20b9ab8d0 at pc 0x7fa20b982894 bp 0x7ffdfea8b9c0 sp 0x7ffdfea8b9b8
READ of size 1 at 0x7fa20b9ab8d0 thread T0
#0 0x7fa20b982893 in gsm0503_mcs1_dl_interleave /home/osmocom-build/jenkins/workspace/osmo-gsm-tester_build-osmo-bts/libosmocore/src/coding/gsm0503_interleaving.c:165
Function gsm0503_mcs1_dl_interleave() was being passed the 6-bit USF
encoding while clrearly expecting a 12 element array. TS 05.03 5.1.5.1.2
"USF precoding" also clearly states that 12bit encoding is to be used
for MCS1-4.
Fixes: OS#4483
Change-Id: I94db14de770070b17894a9071aa14391d26e776c
According to 3GPP TS 44.004, figure 7.4a.b, the format of 11-bit
RACH uplink / Uplink access burst block is as defined follows:
<---------------------------------------------------
8 7 6 5 4 3 2 1
+--------------------------------------------------+
| 11 bit RACH uplink / Uplink access burst block | OCT1
+--------------------------------------------------+
| | OCT2
+-------------------+
As was (correctly) assumed in [1], the bit ordering in 11-bit RACH
coding functions is wrong. The problem is that neither of generic
functions from bit16gen.h can be used to load / store the RA11
value (regardless of the endianness), because they assume that
the payload is 16 bit long.
With this patch applied, RA11 values from [1] look correct:
< EGPRS Packet channel request message content > ::=
< Signalling : 110011 < RandomBits : 00111 > > |
< Signalling : 110011 < RandomBits : 00110 > > |
< Signalling : 110011 < RandomBits : 01111 > > |
< Signalling : 110011 < RandomBits : 01100 > > |
< Signalling : 110011 < RandomBits : 00111 > > |
< Signalling : 110011 < RandomBits : 10110 > > ;
[1] Id80e471d252b9416217b56f4c8c0a8f5f1289fee
Change-Id: I43d30611dd69f77f2b3b46f4b56056a8891d3c24
Related: OS#1548
an USIM application can very well exist on a UICC without supporting
classic DF.GSM access. However, most commonly, both are found on
cards.
Change-Id: I6180a3f81a7d3006e8ece4302c2433db2588bfaa
Before this change, a card application (USIM, ISIM, ...) didn't
exist as a separate concept from a card profile. This meant,
we had a manual combination of UICC card profile with USIM application,
and another one of UICC card profile and ISIM application. But what
if there's a combined USIM+ISIM?
In reality, applications exist as separate objects, on top of an
ETSI UICC. Lets therefore register all known applications to the
osim library core, and add code to osmo-sim-test which dynamically
detects all applications present on a given card (by reading EF.DIR).
Change-Id: Ic4b4ac433a9976842b30a017fb0fc347d87201cd
The 3GPP spec document also contains this error at one point, and
it seems I copied it from there :/
Change-Id: I7ad9f491c06f6540747b77017678ee37e6a1550d
libosmosim contains a variety of definitions and utility fuinctions
useful when working with SIM card [protocol]. They can not only
be used with PC/SC readers but also in other contexts.
Change-Id: I741940d3dc2a5653c760e9d1597d7f08afb3b631
The table amr_len_by_ft represents the length of the raw AMR speech bits
in bytes. The table is based on the Table found in RFC 4867 §3.6, Table 1,
Column "Total speech bits". The number of bits is divided by 8 and then
rounded up to get the number of consumed octets.
An AMR SID frame (including STI and MI) takes up 39 bits, this will
result in 5 octets, not in 7. Lets correct this.
Related: OS#2978
Change-Id: Icf330450981b32be5d1cee5b10aa92bac4cb72f5
AMR SID update frames are protected using an 1/4 convolutional coder,
wich is similar to the one used with 6,7 kbit voice frames. Except that
there is no puncturing and the length is different.
Change-Id: Ia35ed4178a7f0d816052b7e5d6478b93a1d9744f
Related: OS#2978
AMR not only specifies a 6 bit CRC for regular voice information. It also
specifies a 14 bit CRC to protect the comfort noise updates contained in
the SID_UPDATE frames.
Change-Id: I5cfd8ca806aba8d42cb9787f69605cea7de6e900
Related: OS#2978
* What we used to call TCH/F and TCH/H in gsmtap are actually only
FACCH/F and FACCH/H, i.e. the signaling part of Bm/Lm channels
* Give them proper names with backwards compatibility #define
* Split VOICE into VOICE_F and VOICE_H. If we don't differentiate this,
a receiver is not able to determine the RSL channel ID of a frame
without looking at external state/context. That in turn has been a
design feature of GSMTAP Um format so far, and programs like
osmo-bts-virtual rely on it.
Change-Id: I952044a17334f35712e087dc41781805000aebc1
Related: OS#2557
In Change-Id If223020933b083fe359a2e8ff5fab1ce64a363d8 we introduced
GSMTAP_CHANNEL_VOICE, but we didn't add it to gsmtap_gsm_channel_names[]
Change-Id: I7ab696d3e0edb13632e048a9e05be03612d3d28c
Related: OS#2557
This adds missing entries for CBCH in the conversion between RSL-style
channel numbers and GSMTAP channel types.
Without this change, you will see tons of messages like
virtphy[19865]: Wed Feb 26 16:16:28 2020 DVIRPHY <0002> gsmtapl1_if.c:267 MS 0000: Ignoring unknown channel type UNKNOWN (0)
if running virtphy of osmocom-bb with a BTS that broadcasts CBCH.
Change-Id: I19bbd2942adf441f58955ac896ef968bfd8aec5f
This function is supposed to return 0 on success or 1 in case of
error. However, it used to return 1 even in case of success. The
reason is that length of the input string was not taken into
account and sscanf() was failing on '\0'.
Let's use osmo_hexparse() and rely on its return value.
P.S. Funny that the unit test expectations were wrong too.
Change-Id: I441a22c7964bb31688071d8bcf6a282d8c0187ff
If (!env_whitelist && addl_env), osmo_environment_append() would
access uninitialized memory. If both are false, execle() would
also deal with garbage values. Let's ensure that at least the
first element of new_env[] is initialized.
Change-Id: Id3901de4692ef44e9e9c67b1804e027fc4ce7c18
Fixes: CID#206571
Most likely, we should not assert() here, but let's at least log
an error message in case if osmo_fd_register() fails.
Change-Id: Ia20755ec12ee9fb0eba8322551642a96e68e1570
Related: CID#206572
Some osmo-* applications may need to use their own VTY node as a
parent for the timer configuration commands. Therefore it makes
more sense to use 'unsigned int' instead of 'enum node_type'.
Let's also clarify that osmo_tdef_vty_groups_init() accepts parent
node for configuration commands only: 'parent_node' -> 'parent_cfg_node'.
Change-Id: Ifb4c406c85d76a25fc53fc235484599aa87dc77c