The regular 'sh ns' lists all available NS. Sometimes it's handy to know
which of those are persistent.
* add "show ns persistent" command
* adjust parameters of dump-ns*() functions to use bool where
appropriate
Change-Id: Ib812864bae3ea414cc107a7b4f49bea4e6161795
In Change-Id Ifc6ac824f5dae9a848bb4a5d067c64a69eb40b56 we introduce
name mangling to replace any '.' in counter (group) names to be
converted to ':'. Let's test for this functionality explicitly as part
of the stats_test.
Change-Id: Ie35682aa79526e2ffeab6995cd640b7847d855bf
The rate_ctr.c code would do this mangling automatically, but let's
avoid using this from new versions of our code for
simplicity/explicitness.
Change-Id: I24a556f447cfac25efb6e83cac2d0c2972d98fe3
As rate counters are automatically exposed on the CTRL interface,
we need to make sure they don't contain special characters such as '.'
which are not permitted/supported by CTRL.
In order to be able to run old versions of osmocom programs with
libosmocore versions after this commit, we introduce some special
name mangling: Any '.' in the names are replaced with ':' during
counter group registration, if valid identifiers can be obtained
this way.
Change-Id: Ifc6ac824f5dae9a848bb4a5d067c64a69eb40b56
Let's enforce that the names of FSMs and their instances are valid
osmocom identifiers. This is important as the FSMs are automatically
exported via those names on the CTRL inteface, and we have to make sure
CTRL syntax actually permits them.
Change-Id: I9ef59432f43a3cdb94e4cbb0c44ac3f9b2aac0f2
We define the notion of an 'osmocom identifier' which is basically a
7-bit US-ASCII without any special characters beyond "-_:@". We
introduce a function to verify if an identifier consists only of the
permitted characters.
Change-Id: I96a8d345c5a69238a12d040f39b70c485a5c421c
Change I24e500e132f5c8e8133d35548cb7b4e4552331d0 was merged, but IMHO needs
improvement. Fix these:
- clean the git source tree before each build step, in common prep_build().
- fix indenting inside the build() macros.
- change build() arg to be build_dir, to absorb cleanup steps into build().
- in jenkins.sh, use $ENABLE_SANITIZE as global env, not passed as arg.
- in jenkins.sh, don't do 'make distcheck' twice. It is not necessary to do it
from source tree as well as separately from source tree, since distcheck
already moves to a different build dir.
Change-Id: I09d306350602f21943d5bd45f7388c83ede9b524
Combine the C source file name and the string name into the fsm's internal name
token, and use it in most places instead of the plain struct name: osmo-bsc's
new FSMs have identical struct names in each static c context.
Output in a file name that includes all of these more detailed name tokens.
Also parse '(1 << EVENT)' as event names.
Note that besides this patch, there are also some tweaks to the osmo-bsc patch
that improve the fsm-to-dot experience...
- call fsm-to-dot for single files to avoid name conflicts, or rename each
struct as a unique name.
- Add comments for the event name a callback is intended for, so that not all
transitions are interpreted as TEARDOWN (because it is invoked in common
error handling, which causes the script to interpret it as the causing
event). (or change the event-checking if into a switch that names the valid
event and has a default case for all others.)
Change-Id: Ib60df7fd19efc99ba9fe797f14c0e3239c4bea20
When dumping NSE via vty:
* check which local address would be used to communicate with a given
NSE and print it
* print link layer type last to make output more consistent
Change-Id: I6932a29c7899d36bcc275f05dda9670b0e69bef0
Related: SYS#3610
* add comment about underlying assumption that structs in ip/frgre union
members in gprs_nsvc struct have the same memory layout
* remove such assumption from gprs_ns_ll_str()
* use gprs_ns_ll_str() for NSE dump
Change-Id: Idcb912b7b3f7460fd2b058e16650c0bde8f757ee
This enables logging for every state transition which makes NS
troubleshooting easier.
Change-Id: I5d6eaef0432d9be810bf93d07e40787b9ca59142
Related: SYS#3610
* introduce defines with NS state names
* use them for vty and tests
* expand test output to print complete NS state
Change-Id: I69f8d536135ae76dbca623c2f1ffba625adcb1e9
Related: SYS#3610
Add macro to append to a CTRL commands' reply string, ctrl_cmd_reply_printf().
The talloc_asprintf() part of it is generic enough to qualify for a separate
macro, osmo_talloc_asprintf().
The idea is to not have to decide for each bit added to a string whether the
string is already allocated or not, but simply be able to issue printf commands
and let the macro worry about initial allocation or reallocation.
This originally came from osmo-hlr change
I1bd62ae0d4eefde7e1517db15a2155640a1bab58, where it was requested to move this
bit to libosmocore.
Change-Id: Ic9dba0e4a1eb5a7dc3cee2f181b9024ed4fc7005
Fixes the compilation warning below:
git/libosmocore/src/vty/command.c: In function ‘cmd_complete_command_real’:
git/libosmocore/src/vty/command.c:1953:33: warning: comparison between pointer and zero character const
ant [-Wpointer-compare]
if (vector_slot(vline, index) == '\0')
^~
git/libosmocore/src/vty/command.c:37:0:
git/libosmocore/include/osmocom/vty/vector.h:39:27: note: did you mean to dereference the pointer?
#define vector_slot(V,I) ((V)->index[(I)])
^
git/libosmocore/src/vty/command.c:1953:7: note: in expansion of macro ‘vector_slot’
if (vector_slot(vline, index) == '\0')
^~~~~~~~~~~
Change-Id: Iaba9e3450d68c51e16a7bda2fc0fc370992ca866
When listening for nsip connections is enabled, then every remote
host may send packets. This is useful for an SGSN that serves
multiple PCUs, but contraproductive for a PCU that awaits packets
from a single SGSN.
Add struct members remote_ip, and remote_port to struct gprs_ns_inst,
when set, then the listening end uses connect() to ensure that only
the expected host may send packets.
Related: OS#2401
Change-Id: Ifeb201d9006eec275a46708007ff342cdfc14e45
Old bitvec_set_uint() uses "unsigned int" as input parameter which
length is not guaranteed. It does not allow to specify which bit_value
to set and does not check for incorrect length. Overall this makes it
harder to re-use and more error-prone.
Let's replace it with extended implementation which uses fixed type
length parameters and extra checks. The additional parameter allows
caller to explicitly indicate the need to use L/H instead of 0/1 for bit
vector elements. It's necessary to properly encode some of the messages
from 3GPP TS 44.018, for example §10.5.2.16 IA Rest Octets.
The old function is left for backward compatibility as a tiny wrapper
around new function and will be deprecated in follow-up patches.
Change-Id: I1b670dacb55fb3063271d045f9faa10fccba10a6
Related: OS#1526
This function is actively used by OsmoPCU but have not been covered by
tests so far. The test code is based on
Minh-Quang Nguyen <minh-quang.nguyen@nutaq.com> submission with some
modifications.
The test's FIXME will be addressed in follow-up patches.
Change-Id: I2ee544256b8675bc62a42493aab66a8eeee54f90
Related: OS#1526
Add ctrl_interface_setup_dynip2() to add a node_count parameter, which can be
used to define more ctrl nodes without having to merge a patch to libosmocore.
In consequence, also add ctrl_handle_alloc2(), since
ctrl_interface_setup_dynip() uses ctrl_handle_alloc() to allocate the node
slots, and add node_count param to static ctrl_init().
Passing zero as node_count indicates to use the default of _LAST_CTRL_NODE as
before, i.e. to not define more ctrl nodes. Assert that we never allocate less
than _LAST_CTRL_NODE slots.
The current ctrl_interface_setup_dynip() and ctrl_handle_alloc() become simple
wrappers that pass zero as node_count. Their use is still valid and they do not
need to be deprecated.
The API comment to ctrl_interface_setup_dynip2() explains how to define more
node IDs.
This patch was verified to work by osmo-hlr.git change
I98ee6a06b3aa6a67adb868e0b63b0e04eb42eb50 which adds two node IDs for use by
osmo-hlr only.
Change-Id: I1bd62ae0d4eefde7e1517db15a2155640a1bab58
Similar APIs exist for opstate and availability status.
This patch does not break backward compatibility because osmo-bsc still
requires direct use of the structure in get_string_value().
Change-Id: Ieace734aaff3f07606113feddde65b75202d96d6
In some cases it is required to know the ip-address of the interface
through that a given remote IP-Address can be reached.
Add function osmo_sock_local_ip() to determine the local ip-address
for a given remote ip-address
Change-Id: I2988cc52b196fc8476703d1287e24cb4a48491c2
In ASCII string based protocols it a printf() version that prints
directly to the message buffer may be useful.
Add function msgb_printf(), make sure that msg buffer bounderies
are not exceeded. If the end of the tail buffer is hit, return
with an error code.
Change-Id: I15e1af68616309555d0ed9ac5da027c9833d42e3
Previously it would crash on NULL input. Let's handle it gracefully
instead. Corresponding test case is also added.
Change-Id: I587153e49d1c92128fac3ae5c124adba9592378e
* reorder builds to avoid rm -rf invocation
* avoid useless double autoreconf
* move common parts into shared helper
* move common build steps into separate function
Change-Id: I24e500e132f5c8e8133d35548cb7b4e4552331d0
stats.h uses a rather crude '#ifdef unix' hack, which means that Doxygen
will not scan the body of the file. This patch ensures 'unix' is defined
to parse the stats.h body and thus have all relevant information in it
is parsed.
Change-Id: I65384e5cc01f2ad7783cf6b71ab78b4422902aa1
Let's not put files of libosmovty into Doxygen groups of libosmocore,
as this seems to confuse Doxygen. Also, some minor updates/fixes
of libosmovty documentation.
Change-Id: I70e612b8d06aabefe634fcd7861641ffb941d974
Max
Harald Welte
Pau Espin
Philipp Maier