This structure is needed in order to identify a given cell within the
BSS during RIM transactions.
The naming was made up by myself since I couldn't find any naming
reference for this kind of data (RAI + CI).
Since LAI + CI = CGI, then RAI + CI = CGI-PS
osmo_rai_name2 family of functions get a "2" suffix due to already
existing functions handling struct struct gprs_ra_id in gsm48.h
Change-Id: If48f412c32e8e5a3e604a78d12b74787a4786374
3GPP TS 48.018, section 11.3.65 describes an IE to transfer some control
flags via a RIM container. The IE is essentially just a bitfield, so it
can be parsed by overlaying it with a C-struct. Lets add an appropiate
struct to protocol/gsm_08_18.h
Change-Id: I781ab838bd02ac1b13d384ce3f4259e26cedb61e
Related: SYS#5103
Prior to this patch, it was not possible to gather SET/GET reply
information when implementing a CTRL client using libosmocontrol. This
is specially important when using the GET command, since one wants to
receive the queried value.
CTRL traps can also be handled this way by extending this patch in the
future if needed.
Change-Id: Id3c4631cd32c13e78e11b6e8194b8c16307ec4f1
This adds an inter-thread queue "it_q" to libosmocore. With it_q,
one can perform thread-safe enqueing of messages to another thread,
who will receive the related messages triggered via an eventfd
handled in the usual libosmocore select loop abstraction.
Change-Id: Ie7d0c5fec715a2a577fae014b0b8a0e9c38418ef
In 'struct gsmtap_hdr' field 'snr_db' is defined as a signed integer,
however all functions that fill this structure accept an unsigned
integer. This is wrong, because SNR can be negative.
Let's use 'int8_t' instead of 'uint8_t'. Changing from unsigned
to signed should be relatively safe compared to the opposite.
Most of the callers I am aware of always do pass 0 anyway.
Change-Id: I9f432be5c346d563bf518111c14ff04d4a63f592
Related: SYS#5073
Some averaging methods may have additional parameters, so let's
make it easier to access them for the API user.
Change-Id: I2f4ed56837dd479dbbd10c0a7df0ed7565d3946a
Related: SYS#4918
This function is called automatically on the main thread, but needs to
ba called explicitly in order to run the select loop on another thread.
Make it available for applications through talloc.h
Change-Id: Ie710ca9ad01d3fadb9f4ff344a55d6c01004727b
This is a helper function to broadcast an event to all of the
siblings of a specified FSM instance.
Change-Id: I2ce398741a8672d7b7c4058d056f46e2fe7353c1
Thanks to the CLI of nanoBTS, I noticed that upper and lower RxQual
thresholds are sent in wrong order. Only the little-endian variant
needs to be fixed, the big-endian one looks good.
Change-Id: If6ab2377bae6742f871589b529a349498775552f
Related: SYS#4918
This is required in order to tell MS that osmo-pcu now supports
Network Assisted Cell Change (NACC).
Related: SYS#4909
Change-Id: I2aaa8c1107c977f711c2d7530034f57e36e3a237
The RIM Routing Information IE (see also 3GPP TS 48.018, section
11.3.70) is used to control the flow of BSSGP rim messages at the SGSN.
Change-Id: I6f88a9aeeb50a612d32e9efd23040c9740bc4f11
Related: SYS#5103
The IP-SNS requires at least one initial remote address of the SGSN.
However it should be multiple initial remote address instead of a single
in case the interface might fail.
Rework the SNS to support multiple initial remote addresses.
Change-Id: I71cdbfb53e361e6112fed5e2712236d797ef3ab2
Add gprs_ns2_fr_connect2() and change gprs_ns2_fr_connect() to
be similar to gprs_ns2_ip_connect() and gprs_ns2_connect2().
This is an API break but there wasn't yet a release with NS2.
Change-Id: I4e1374b0e979b3293302c5ed46a91a58f3a5a916
Every bind will have a unique name. Add a name argument
to all bind creating functions and require them to be unique.
This is an API break but there wasn't yet a release with NS2.
Change-Id: I8f1d66b7b3b12da12db8b5e6bd08c1beff085b3e
A NS dialect describes how the NS Entity interacts with
different virtual circuits. E.g. ipaccess use reset/block on udp
and is a dynamic connection.
A single NS Entity can only support one dialect. This can be later
used to protect a NS Entity against dynamic NS virtual circuits of a
different type.
It further allows a bind to support multiple dialects at the same time.
Change-Id: Ia118bb6f994845d84db09de7a94856f5ca573404
The FSM doesn't actually implement the flow control logic,
it only decodes / dispatches and encodes messages.
Related: OS#4891
Change-Id: Ie59be6761177c43456898be9148727f15861a622
Similar to ns2 superseding ns, we now also intoduce a next generation
of BSSGP related code to libosmogb. However, this is not aiming to
be a full implementation yet, but simply those parts that we currently
need from the revamped osmo-gbproxy.
The gprs_bssgp2.[ch] differs in two ways from the old code:
* it separates message encoding from message transmission
* it supports more recent specs / IEs
bssgp_bvc_fsm.c is a genric implementation of the BSSGP BVC
RESET/BLOCK/UNBLOCK logic with support for both PTP and signaling,
both on the SGSN side and the BSS side.
Change-Id: Icbe8e4f03b68fd73b8eae95f6f6cccd4fa9af95a
Historically, BSSGP uses a non-constant, user-configurable integer
varieable for the logging sub-system. Let's replace this with a
statically-allocated library logging constant.
This is required if we want to use the subsystem number in e.g.
static initialized for osmo_fsm.log_subsys.
Change-Id: I506190aae9217c0956e4b5764d1a0c0772268e93
Those routines are very useful when puzzling together BSSGP messages
with 16-bit and 32bit sized IEs.
Change-Id: I033f9a708c9d7ffad91336178231dc66233e1693
This extends our existing TLV parser with the ability to
* validate that mandatory IEs of a given message are present
* validate that all present IEs are of required minimum length
Introducing this generic layer will help us to reduce open-coded
imperative verification across virtually all the protocols we
implement, as well as add validation to those protocols where we
don't properly perform related input validation yet.
Change-Id: If1e1d9adfa141ca86001dbd62a6a339f9bf9a912
When importing the hashtable code in I8ef73a62fe9846ce45058eb21cf999dd3eed5741
I didn't import actual implementations of the fls() and fls64()
implementations, as at least gcc-10 was smart enough to detect
we only use it on constant types and hence the computation can happen
at build time via const_ilog2()
However, in our jenkins build verification' this doesn't appear to
happen, as we get below errors:
/build/deps/install/stow/libosmocore/include/osmocom/core/log2.h: In function ‘__ilog2_u32’:
/build/deps/install/stow/libosmocore/include/osmocom/core/log2.h:20:9: error: implicit declaration of function ‘fls’ [-Werror=implicit-function-declaration]
return fls(n) - 1;
^~~
/build/deps/install/stow/libosmocore/include/osmocom/core/log2.h: In function ‘__ilog2_u64’:
/build/deps/install/stow/libosmocore/include/osmocom/core/log2.h:28:9: error: implicit declaration of function ‘fls64’ [-Werror=implicit-function-declaration]
return fls64(n) - 1;
^~~~~
Let's provide some generic implementations for this case. If needed
one could also introduce architecture-specific assembly implementations
like in the Linux kernel, but so far we managed to keep libosmocore free
of any assembly tweaks.
Change-Id: Ifa4898eb66c8d949618edd47961b7a0330ed35b5
In I7da8b25c9a89a7e3ae6c1680ba838e136d7d5293 I seem to have failed
to realize that 3GPP TS 48.018 v15.0.0.0 Table 11.3.26 continues
on yet another page. Let's add those missing PDU types definitions.
Change-Id: I9173c35240ff78048b2b76a1155d90467ef16b2d
'new' is a reserved keyword in C++, so including this header from
a C++ project (like osmo-pcu) breaks compilation. Let's rename
it in the same way as it's already done in this file: add '_'.
Change-Id: I7f7d9143edca75ce932601386a8766b0a62c0e24
Fixes: I8ef73a62fe9846ce45058eb21cf999dd3eed5741
For more than a decade we've used the linuxlist.h for double-linked
lists. Let's also add the hlist (double-linked lists with single
pointer sized head, and the hashtable that builds on top of it.
This reflects the versions included in Linux 5.8 with some modifications
to make them build in userspace (remove RCU versions, adjust for
userspace include files and types, convert to doxygen).
Change-Id: I8ef73a62fe9846ce45058eb21cf999dd3eed5741
NSVC filtering was only implemented on sending messages, this also adds
log_set_context() calls to ns2_recv_vc()
Filtering by NSE is implemented similar to NSVC.
Change-Id: I63c0e85f82f5d08c5a6f535da94b8648498439d2
Related: SYS#5232
This adds an easy way to listen to netlink events form the Linux kernel
from within libosmocore applications.
The new dependency can be disabled via the "--disable-lbimnl" configure flag.
Change-Id: I4f787ee68f0d6d04f0a5655eb57d55b3b326a42f
Even it was in theory possible to mix NS-VC ll types within
a NSE. This is an unrealistic configuration.
Further more to select the correct load sharing mechanism
the NSE must know the correct link layer.
Change-Id: I18dfd40a2429cd61b7c4a3dad5f226c64296f7d8
Pau Espin
Philipp Maier
Pau Espin Pedrol
Harald Welte
Vadim Yanitskiy
Daniel Willmann