This is similar to msgb_tailroom(): It returns the amount of space
left at the end of the bit vector (compared to the current cursor).
The function returns the number of bits left in the bitvec.
Change-Id: I8980a6b6d1973b67a2d9ad411c878d956fb428d1
Move T_def from osmo-bsc to libosmocore as osmo_tdef. Adjust naming to be more
consistent. Upgrade to first class API:
- add timer grouping
- add generic vty support
- add mising API doc
- add C test
- add VTY transcript tests, also as examples for using the API
From osmo_fsm_inst_state_chg() API doc, cross reference to osmo_tdef API.
The root reason for moving to libosmocore is that I want to use the
mgw_endpoint_fsm in osmo-msc for inter-MSC handover, and hence want to move the
FSM to libosmo-mgcp-client. This FSM uses the T_def from osmo-bsc. Though the
mgw_endpoint_fsm's use of T_def is minimal, I intend to use the osmo_tdef API
in osmo-msc (and probably elsewhere) as well. libosmocore is the most sensible
place for this.
osmo_tdef provides:
- a list of Tnnnn (GSM) timers with description, unit and default value.
- vty UI to allow users to configure non-default timeouts.
- API to tie T timers to osmo_fsm states and set them on state transitions.
- a few standard units (minute, second, millisecond) as well as a custom unit
(which relies on the timer's human readable description to indicate the
meaning of the value).
- conversion for standard units: for example, some GSM timers are defined in
minutes, while our FSM definitions need timeouts in seconds. Conversion is
for convenience only and can be easily avoided via the custom unit.
By keeping separate osmo_tdef arrays, several groups of timers can be kept
separately. The VTY tests in tests/tdef/ showcase different schemes:
- tests/vty/tdef_vty_test_config_root.c:
Keep several timer definitions in separately named groups: showcase the
osmo_tdef_vty_groups*() API. Each timer group exists exactly once.
- tests/vty/tdef_vty_test_config_subnode.c:
Keep a single list of timers without separate grouping.
Put this list on a specific subnode below the CONFIG_NODE.
There could be several separate subnodes with timers like this, i.e.
continuing from this example, sets timers could be separated by placing
timers in specific config subnodes instead of using the global group name.
- tests/vty/tdef_vty_test_dynamic.c:
Dynamically allocate timer definitions per each new created object.
Thus there can be an arbitrary number of independent timer definitions, one
per allocated object.
T_def was introduced during the recent osmo-bsc refactoring for inter-BSC
handover, and has proven useful:
- without osmo_tdef, each invocation of osmo_fsm_inst_state_chg() needs to be
programmed with the right timeout value, for all code paths that invoke this
state change. It is a likely source of errors to get one of them wrong. By
defining a T timer exactly for an FSM state, the caller can merely invoke the
state change and trust on the original state definition to apply the correct
timeout.
- it is helpful to have a standardized config file UI to provide user
configurable timeouts, instead of inventing new VTY commands for each
separate application of T timer numbers.
Change-Id: Ibd6b1ed7f1bd6e1f2e0fde53352055a4468f23e5
Since very recently we sensibly handle commands like
cmd ([one]|[two]|[three])
as optional multi-choice arguments. In addition, support the more obvious
syntax of
cmd [(one|two|three)]
Internally, the tokens are mangled to [one] [two] and [three], which is how the
rest of the code detects optional args, and makes sense in terms of UI:
> cmd ?
[one]
[two]
[three]
(i.e. optional arguments are always shown in braces in '?' listings)
Before this patch, commands defined with a syntax like [(one|two)], would lead
to an assertion (shows as "multiple") during program startup.
Change-Id: I952b3c00f97e2447f2308b0ec6f5f1714692b5b2
Add basic optional multi-choice argument support.
The VTY detects optional arguments by square braces.
> cmd ?
[optional-arg]
> cmd optional-arg
ok
> cmd
ok
However, within multi-choice args, these braces were so far not treated as
optional:
> list
cmd2 ([one]|[two]|[three])
> cmd2
% Command incomplete
In preparation for I952b3c00f97e2447f2308b0ec6f5f1714692b5b2 which will enable
the more obvious syntax of
cmd [(one|two)]
for reasons of internal implementation, first support a syntax of
cmd ([one]|[two])
The internal vty implementation always needs square braces around each option.
There is currently no good way to prevent developers from defining braces
inside multi-arguments, so it is easiest to allow and handle them:
> list
cmd2 ([one]|[two]|[three])
> cmd2
ok
The VTY doesn't guard against a mix like
cmd (one|[two])
With this patch, a multi-choice command is treated as optional iff the first
element is in square brackets. The remaining elements' square brackets have no
effect besides confusing the user. This is not explicitly checked against.
In general, I would prefer to check all of these details, but the current VTY
code with its endless code duplication and obscure string mangling just doesn't
provide that luxury. There are numerous worse errors hidden in there.
Change-Id: I9a8474bd89ddc2155c58bfca7bd038d586aaa60a
I want to tweak general VTY features and need to cover with a transcript test
to show the differences. Start by showing the current situation of optional
and multi-choice arguments.
Change-Id: I5a79c83fabd02aba6406b6e0d620969c4bd0cc1d
Before this patch, if timeout_secs == 0 was passed to
osmo_fsm_inst_state_chg(), the previous T value remained set in the
osmo_fsm_inst->T.
For example:
osmo_fsm_inst_state_chg(fi, ST_X, 23, 42);
// timer == 23 seconds; fi->T == 42
osmo_fsm_inst_state_chg(fi, ST_Y, 0, 0);
// no timer; fi->T == 42!
Instead, always set to the T value passed to osmo_fsm_inst_state_chg().
Adjust osmo_fsm_inst_state_chg() API doc; need to rephrase to accurately
describe the otherwise unchanged behaviour independently from T.
Verify in fsm_test.c.
Rationale: it is confusing to have a T number remaining from some past state,
especially since the user explicitly passed a T number to
osmo_fsm_inst_state_chg(). (Usually we are passing timeout_secs=0, T=0).
I first thought this behavior was introduced with
osmo_fsm_inst_state_chg_keep_timer(), but in fact osmo_fsm_inst_state_chg()
behaved this way from the start.
This shows up in the C test for the upcoming tdef API, where the test result
printout was showing some past T value sticking around after FSM state
transitions. After this patch, there will be no such confusion.
Change-Id: I65c7c262674a1bc5f37faeca6aa0320ab0174f3c
It was introduced and forgotten to add to EXTRA_DIST in:
"logging vty: add VTY transcript test"
commit 3a9ff11e57
change-Id I948e832a33131f8eab98651d6010ceb0ccbc9a9c
Change-Id: I1bcedf3097f02b2adc679560d1cbceb27dbc345e
Add osmo_hexdump_buf() as an all-purpose hexdump function, which all other
osmo_hexdump_*() implementations now call. It absorbs the static
_osmo_hexdump(). Add tests for osmo_hexdump_buf().
Rationale: recently during patch review, a situation came up where two hexdumps
in a single printf would have been useful. Now I've faced a similar situation
again, in ongoing development. So I decided it is time to provide this API.
The traditional osmo_hexdump() API returns a non-const char*, which should
probably have been a const instead. Particularly this new function may return a
string constant "" if the buf is NULL or empty, so return const char*. That is
why the older implementations calling osmo_hexdump_buf() separately return the
buffer instead of the const return value directly.
Change-Id: I590595567b218b24e53c9eb1fd8736c0324d371d
Add
* osmo_lai_cmp() (to use in gsm0808_cell_id_u_matches())
* osmo_cgi_cmp() (to use in gsm0808_cell_id_u_matches())
* gsm0808_cell_id_u_match() (to re-use for single IDs and lists)
* gsm0808_cell_ids_match()
* gsm0808_cell_id_matches_list()
* Unit tests in gsm0808_test.c
Rationale:
For inter-BSC handover, it is interesting to find matches between *differing*
Cell Identity kinds. For example, if a cell as CGI 23-42-3-5, and a HO for
LAC-CI 3-5 should be handled, we need to see the match.
This is most interesting for osmo-msc, i.e. to direct the BSSMAP Handover
Request towards the correct BSC or MSC.
It is also interesting for osmo-bsc's VTY interface, to be able to manage
cells' neighbors and to trigger manual handovers by various Cell Identity
handles, as the user would expect them.
Change-Id: I5535f0d149c2173294538df75764dd181b023312
The IMEI-SV is speified as a 16 digit number: 14 digits of IMEI plus
two digits of software version. Let's not try to feed 18 digit long
numbers into our functions, as the resulting behavior is unspecified.
Change-Id: I6fb85a0516dc387902ad9de4fe8c1ba82d68cae6
Most of the time we'll have GCR filled anyway so it make sense to have
it as static parameter instead of a pointer to separately allocated
structure. Update tests to cover both static and dynamic osmo_lcls
allocation variants.
Change-Id: I905c36d8455911c68c30bc429379b7313dd46aea
* add gsm0808_create_ass_compl2() with additional gsm0808_lcls_status
parameter and make gsm0808_create_ass_compl() into trivial wrapper
around it
* update tests accordingly
Change-Id: I547c6b8707123aa8c1ef636db88908df112d90a4
Related: OS#2487
Verify 14 digit and 15 digit IMEI strings. OsmoHLR will use the 14
digit version to check IMEIs before writing them to the DB.
Place the Luhn checksum code in a dedicated osmo_luhn() function, so
it can be used elsewhere.
Related: OS#2541
Change-Id: Id2d2a3a93b033bafc74c62e15297034bf4aafe61
As part of fixing issue OS#3075, we want to migrate support
for encoding system information from osmo-bsc to libosmocore.
This change ports one of the prerequisites for doing so:
osmo-bsc code for range-encoding ARFCNs, including tests.
An osmo_gsm48_ prefix has been prepended to public symbols in
order to avoid clashes with existing symbols in osmo-bsc code.
Change-Id: Ia220764fba451be5e975ae7c5eefb1a25ac2bf2c
Related: OS#3075
We have gsm48_mi_to_string() and osmo_bcd2str(), but still lack a function that
conveniently prints both MI type and value in one function call.
Related: http://people.osmocom.org/neels/mi_mi_mi.jpg
Change-Id: I7798c3ef983c2e333b2b9cbffef6f366f370bd81
Both session state and session ID IEs were left from the initial
version of Ibe325c64ae2d6c626b232533bb4cbc65fc2b5d71. There is
no need to use them (as we use SM-RP-MR), so let's clean up.
Change-Id: I0d910b87f15ffbc0aeeca9cb4fcbef32bdf3ef88
In 3GPP TS 48.008 the Global Call Reference IE is only used in HANDOVER
REQUEST (§3.2.1.8) and ASSIGNMENT REQUEST (§3.2.1.1) messages which
also include LCLS Config and CSC parameters. Hence, there's no point in
using GCR encode/decode functions alone.
Introduce gsm0808_dec_lcls() and gsm0808_enc_lcls() as trivial wrappers
on top of GCR enc/dec routines which are made static. Adjust tests
accordingly. Test output intentionally left unchanged.
Change-Id: Icfbb2404e1a1d500243e2071173299b557369335
Since I3bc95f2f5ab6e3f4b502647fb3e0aaaf1f7c4cf5, we have some
helpers to compare certain msgb layer to a given buffer. Let's
change 'VERIFY' macro to use msgb_eq_l3_data_print().
Change-Id: Ib6be778236eff8f2153f3113f9379ecfbec9052b
Implement necessary messages for Procedure Check_IMEI_VLR (TS 23.018
Chapter 7.1.2.9). This lets the VLR ask the EIR to check if an IMEI
is valid. In the Osmocom stack, we don't have an EIR and this request
will be handled by the HLR. We will be able to store the IMEI in the
HLR as side-effect (OS#2541).
This is roughly based on TS 29.002 8.7.1 MAP_CHECK_IMEI service, but
only implements the bare minimum required IEs (imei and imei_result).
Related: OS#3733
Change-Id: I085819df0ea7f3bfeb0cabebb5fd1942a23c6155
Simplify gsup_test.c by defining an end marker in gsup.h. No need to
manually update the last element every time anymore.
The C standard guarantees, that the end marker will have the last value
plus one: "Each subsequent enumerator with no = defines its enumeration
constant as the value of the constant expression obtained by adding 1 to
the value of the previous enumeration constant." (From C99: 6.7.2.2
Enumeration specifiers)
Change-Id: I2aab7245e209f0ebd2f33a83d4d181dd3339cb17
This is 1:1 the result of doing
cd libosmocore
./contrib/struct_endianess.py
git commit -a
Running struct_endianess.py again should result in no changes.
That means we could include such a check in the gerrit verification job now.
Change-Id: Ia0b99d76932aeb03e93bd0c62d3bf025dec5f9d2
According to 3GPP TS 29.002, section 12.4, MAP-READY-FOR-SM is
used between the MSC and VLR as well as between the VLR and the
HLR to indicate that a subscriber has memory available for SMS.
This change replicates this service in GSUP as READY_FOR_SM_*.
The only mandatory IE for this service (excluding Invoke ID) is
'Alert Reason' that is replicated by OSMO_GSUP_SM_ALERT_RSN_IE.
Change-Id: Ic37f3b2114b8095cfce22977e67133b9103942e3
Related Change-Id: (docs) I549b6c8840a1e86caac09e77fb8bc5042d939e62
Related Change-Id: (TTCN) If2256607527ecfcb10285583332fb8b0515d7c78
Related: OS#3587
According to 3GPP TS 29.002, there are two services:
- MAP-MO-FORWARD-SHORT-MESSAGE (see 12.2),
- MAP-MT-FORWARD-SHORT-MESSAGE (see 12.9),
which are used to forward MO/MT short messages.
This change replicates both services as GSUP messages:
- OSMO_GSUP_MSGT_MO_FORWARD_SM_*,
- OSMO_GSUP_MSGT_MT_FORWARD_SM_*.
Please note, that only the 'must-have' IEs are introduced
by this change, in particular the following:
- OSMO_GSUP_SM_RP_MR_IE (see note below),
- OSMO_GSUP_SM_RP_DA_IE (see 7.6.8.1),
- OSMO_GSUP_SM_RP_OA_IE (see 7.6.8.2),
- OSMO_GSUP_SM_RP_UI_IE (see 7.6.8.4),
- OSMO_GSUP_SM_RP_MMS_IE (see 7.6.8.7),
- OSMO_GSUP_SM_RP_CAUSE_IE (see GSM TS 04.11, 8.2.5.4),
where both SM_RP_DA and SM_RP_OA IEs basically contain
a single nested TV of the following format:
- T: identity type (see 'osmo_gsup_sms_sm_rp_oda_t'),
- V: encoded identity itself (optional).
According to GSM TS 04.11, every single message on the SM-RL has
an unique message reference (see 8.2.3), that is used to link
an RP-ACK or RP-ERROR message to the associated (preceding)
RP-DATA or RP-SMMA message transfer attempt.
In case of TCAP/MAP, this message reference is being mapped to the
Invoke ID. But since GSUP has no 'Invoke ID' IE, and it is not
required for other applications (other than SMS), this change
introduces a special 'SM_RP_MR' IE that doesn't exist in MAP.
Change-Id: Ibe325c64ae2d6c626b232533bb4cbc65fc2b5d71
Related Change-Id: (docs) Ie0150756c33c1352bc4eb49421824542c711175c
Related Change-Id: (TTCN) Ibf49474a81235096c032ea21f217170f523bd94e
Related: OS#3587
* add functions to encode Global Call. Ref. from TS 29.205 as 3GPP TS
48.008 §3.2.2.115 information element
* add corresponding tests
Change-Id: I82ce0207dc8de50689a8806c6471ad7fbae6219d
Add functions to encode and decode Global Call Reference as per
3GPP TS 29.205 Table B 2.1.9.1 add corresponding tests.
Change-Id: Iee95aa4e5c056645b6cb5667e4a067097d52dfbf
Related: OS#2487
All successful cases already return from the switch(), so simply handle all
errors below it by returning an empty string (if there is enough string
buffer).
Change-Id: I709ac3b9efb7b4258d8660715b10312e11b9b571
For MI encoding, see 3GPP TS 24.008, 10.5.1.4 Mobile Identity. The 'odd' flag
indicates whether the last BCD nibble is used. Of course that flag should be
made sure to reflect the actual length.
Change-Id: Id6e695ebf9f86b295eaa7e2c6228989256f37e68
By using osmo_bcd2str(), ensure that the resulting string is always nul
terminated, and always return strlen()+1 whether truncated or not.
Still keep up the previous return value style, even if that isn't consistent at
all.
The difference between IMSI/IMEI and TMSI return values remains and is not part
of this patch.
Change-Id: I1b51b72a721e1cc9d69796b804ebda741ff0f36b
Add a standalone bcd-to-string conversion function with generic parameters.
Add a regression test in utils_test.c.
So far there is no single universal implementation that converts a BCD to a
string. I could only find gsm48_mi_to_string(), which also interprets
surrounding bytes, MI type and TMSI as non-BCD value.
The idea is to use this function from gsm48_mi_to_string() and similar
implementations in subsequent commits.
Root cause: in osmo-msc, I want to have an alternative MI-to-string function
for composing an FSM name, which needs the BCD part of gsm48_mi_to_string() but
not the TMSI part.
Change-Id: I86b09d37ceef33331c1a56046a5443127d6c6be0
One would think by now we would solidly encode and decode Mobile Identities.
Well, guess again.
- rc is sometimes the amount of bytes written, sometimes actual strlen().
- on string truncation, rc is sometimes strlen() (assuming nul terminated), and
sometimes snprintf()-style would-be strlen().
- returned string, when truncated by not enough buffer size, is sometimes nul
terminated, sometimes not.
- gsm48_mi_to_string() happily reads a byte from zero-length input buffer.
- gsm48_mi_to_string() happily writes to zero length output buffer.
- gsm48_mi_to_string() returns nonempty string for empty input.
- encoding a MI type that still has the GSM_MI_ODD flag set results in encoding
an even-length MI as odd-length (hence appending a stray 'F').
I am going to tweak the implementation of gsm48 mobile identity encoding /
decoding, so first pinpoint the current behavior in a unit test, and show how
perforated even such a seemingly trivial API can be.
Change-Id: Iaae3af87f82f1a8f2e6273984c011b2813038cf7
At the moment the all gsm0808 cause codes are encoded directly using the
tlv API directly to put a one byte TLV field. This works ok for most
situations where the cause code consists of a single byte. However,
gsm0808 specifies a two byte cause code model where cause codes may be
extended up to two bytes. Instead of implementing the encoding over and
over and again, let's rather have an encoder function we can call.
- Add an encoder function that can generate single byte and extended
cause codeds and makes the length decision automatically.
- Use only this function to append cause codes
Change-Id: I71d58fad89502a43532f60717ca022c15c73f8bb
In gprs_ns_process_msg(), we were dispatching the S_NS_UNBLOCK
signal before sending out the NS_POUT_UNBLOCK_ACK message.
Signal handlers might send messages to the other side, assuming
that NS is now unblocked. However, since such messages will arrive
before the UNBLOCK_ACK message the receiver might discard them.
This problem has been observed with our TTCN3 BSSGP_Emulation
as a peer to osmo-pcu.
This patch makes TTCN3 PCU TC_paging() test pass regardless of
whether the test or osmo-pcu is started first. Before this patch,
this test would only pass if the test was started before osmo-pcu.
A remaining problem is that the test does not yet keep passing
reliably unless osmo-pcu is restarted between test runs.
Change-Id: I3af54a14bb6bcfa167c9a9d9f67835e7f5b9f1bb
Related: OS#2890
Related: OS#2388
* add function to generate cipher mode reject with extended (2-byte)
Cause IE
* add function to get (extended) Cause value
* add corresponding (extended cause) test
* update existing (non-extended cause) test
* use enum as a parameter for existing non-extended version to make
interface more unified
Change-Id: Id5509b94a18180a44f45300caaa02b843c166fa3
Related: OS#3187
* add note about (yet) unsupported standard feature
* use enum constant instead of hex value
Change-Id: I5cc5fc1ae8d5474dbc8d3385a493adf6420a3c98
Related: OS#3187
3GPP_TS_48.008, 3.2.2.103 Speech Codec List states the following:
"The length indicator (octet 2) is a binary number indicating the
absolute length of the contents after the length indicator.
The length depends on the number and type of Speech Codec Elements
to be included. The minimum length of one Speech Codec Element is 1
octet and the maximum length is 3 octets. The maximum number of
Speech Codec Elements within the Speech Codec List is not defined."
This clearly refers only to the length of a single speech codec
element but not on the overall list. So speech codec lists with
length 0 are indeed permitted by the spec.
- Remove the assertion that checks on zero length speech codec
lists.
Change-Id: I1eb1f4466b98bdd26d765b0e4cc690b5e89e9dd6
Related: OS#3657
We must explicitly check the return value of osmo_log_vty2tgt(), or may run
into a segfault. I wasn't aware of this and introduced numerous such cases in
I36f17c131cc70ce5a1aef62fd9693097de230cd4.
Reproduce: on the VTY, do not issue 'logging enable', invoke 'logging level
force-all LEVEL' first.
Show in logging_vty_test.vty that this situation is now again amended by
telling the user that logging was not enabled.
Related: OS#3611
Change-Id: Id11702d1801d6654ca5e5a51b597a0d802e2e8dd
We want to have well-formed config files that print exactly one space
per VTY/config node level, and not two.
Change-Id: Ia75c7067284ea225cffe13ca71bad05a7747ae66
Add a function to convert S0-S15 bits to struct gsm48_multi_rate_conf,
which hold the codec settings for AMR.
Change-Id: I973736273c236eee84decf15868190e339c3fed4
Related: OS#3548
Add a function to convert struct gsm48_multi_rate_conf, which holds the
codec settings for AMR, to S0-S15 bit representation as defined in
3GPP TS 48.008 3.2.2.49
This resurrects change-id I4e656731b16621736c7a2f4e64d9ce63b1064e98
which was reverted in I9e0d405e303ed86d23703ca6362e958dddb2f861
due to gsm0808_test failing.
The test failure is fixed by properly clearing the struct
gsm48_multirate_cfg prior to running tests (add memset(0)).
Change-Id: Ia782e21c206c15e840226d79b4209d13658ee916
Related: OS#3548
Add new command to once-off set each and every category to the given log level,
as discussed at length on the openbsc@ mailing list.
Show that it works in logging_vty_test.vty.
Change-Id: I4c3e4f786476cb813fdc0a7c64f30ee04758309d
Add a function to convert struct gsm48_multi_rate_conf, which holds the
codec settings for AMR, to S0-S15 bit representation as defined in
3GPP TS 48.008 3.2.2.49
Change-Id: I4e656731b16621736c7a2f4e64d9ce63b1064e98
Related: OS#3548
Add 'logging level force-all <level>' and 'no logging level force-all' as new
names for 'logging level all <level>' and 'logging level all everything'.
Resurrect the functionality of 'logging level all everything' -- even if it is
still deprecated because the name is confusing, it is now just an alias for
'no logging level force-all'.
Show in logging_vty_test.vty that we can now again lift the global logging
clamp, both with the new commands as well as with the deprecated ones.
Also show that 'force-all' is written back properly, if set.
Change-Id: I36f17c131cc70ce5a1aef62fd9693097de230cd4
The 'logging level all everything' has not had an effect for some time now. The
plan is to bring back its old functionality, but to keep it deprecated and
rather define a less confusing name.
* Deprecate 'everything'.
* Do not write 'everything' during 'write file' or 'show running-config', which
we curiously still do until now.
BTW, the reason why we need to compose a complete list of categories for the
deprecated 'everything' command is explained in detail in the commit log for
I3b083f27e3d751ccec258880ae7676e9af959a63
Change-Id: Ib75fedb0572570a61bb34ee729a2af86cf5f16da
I am setting out to refactor various details about logging. To show the effect,
I am first adding this new test to illustrate the exact effects on the various
osmo programs.
Add logging_vty_test.c as a standalone program that simply defines a few
logging categories and opens a telnet vty to play with.
Add logging_vty_test.vty, as an osmo_verify_transcript_vty.py test script.
Add --enable-external-tests to configure.ac, to enable running
logging_vty_test.vty during 'make check'.
Also allow running 'make vty-test' without the need to first configure with
--enable-external-tests (a flexibility I've missed many times over in the other
osmo source trees).
Add a Makefile.am stub for external CTRL tests, basically a copy-paste from
osmo-msc.git. I doubt that libosmocore will get python driven CTRL interface
testing any time soon, but if so we will know to not run it concurrently.
Change-Id: I948e832a33131f8eab98651d6010ceb0ccbc9a9c
Do not link against the system-wide installed libosmo* libs when building the
regression test programs. Always use the locally built ones.
Linking some libosmo libraries causes libtool to pull in other libosmo libs
even though they were not explicitly named. For example, ctrl_test explicitly
links libosmoctrl, but this also has dependencies to libosmovty and libosmogsm:
ldd src/ctrl/.libs/libosmoctrl.so | grep osmo
libosmocore.so.11 => /usr/local/lib/libosmocore.so.11 (0x00007f26c26d4000)
libosmogsm.so.10 => /usr/local/lib/libosmogsm.so.10 (0x00007f26c22bb000)
libosmovty.so.4 => /usr/local/lib/libosmovty.so.4 (0x00007f26c2171000)
If we omit explicit LDADD of these dependencies in the Makefile.am, libtool
will take the first canonical place to find them, which may just be the already
installed older versions of the same libs, which may or may not be compatible
with the current build. In any case, it is never intended to link installed
libs.
All library dependencies are listed by this quick script:
cd libosmocore
for l in $(find . -name "*.so") ; do echo; echo "$l"; ldd $l | grep libosmo; done
./.libs/libosmocore.so
./coding/.libs/libosmocoding.so
libosmocore.so.11 => /usr/local/lib/libosmocore.so.11 (0x00007f25fc3c2000)
libosmogsm.so.10 => /usr/local/lib/libosmogsm.so.10 (0x00007f25fbfa9000)
libosmocodec.so.0 => /usr/local/lib/libosmocodec.so.0 (0x00007f25fbf9b000)
./codec/.libs/libosmocodec.so
libosmocore.so.11 => /usr/local/lib/libosmocore.so.11 (0x00007fb4c900d000)
./ctrl/.libs/libosmoctrl.so
libosmocore.so.11 => /usr/local/lib/libosmocore.so.11 (0x00007f5df5129000)
libosmogsm.so.10 => /usr/local/lib/libosmogsm.so.10 (0x00007f5df4d10000)
libosmovty.so.4 => /usr/local/lib/libosmovty.so.4 (0x00007f5df4bc6000)
./gb/.libs/libosmogb.so
libosmocore.so.11 => /usr/local/lib/libosmocore.so.11 (0x00007f788e536000)
libosmovty.so.4 => /usr/local/lib/libosmovty.so.4 (0x00007f788e3ec000)
libosmogsm.so.10 => /usr/local/lib/libosmogsm.so.10 (0x00007f788dfd3000)
./vty/.libs/libosmovty.so
libosmocore.so.11 => /usr/local/lib/libosmocore.so.11 (0x00007f3b7ed21000)
./gsm/.libs/libosmogsm.so
libosmocore.so.11 => /usr/local/lib/libosmocore.so.11 (0x00007fc69472e000)
./sim/.libs/libosmosim.so
libosmocore.so.11 => /usr/local/lib/libosmocore.so.11 (0x00007f2f6412d000)
libosmogsm.so.10 => /usr/local/lib/libosmogsm.so.10 (0x00007f2f63d14000)
Add all explicit linking of all required library dependencies in all regression
test programs, as shown by above listing.
Example for reproducing a problem:
In libosmocore.a, introduce a new function, and call that from libosmovty code.
For example, I made loglevel_strs non-static in logging.c, and used that in
logging_vty.c. Build and install this in a place where libtool can find it.
Then go back to before this change and rebuild. You will see that linking
ctrl_test (before this patch) then complains about libosmovty requiring the
loglevel_strs symbol which it cannot find in libosmocore.so.
Change-Id: Id084e6e6efd25cd62b1bd7a4fc7c5985c39130c6
We already have osmo_str2lower() and osmo_str2upper(), but these lack:
* proper destination buffer bounds checking,
* ability to call directly as printf() argument.
Deprecate osmo_str2upper() and osmo_str2lower() because of missing bounds
checking.
Introduce osmo_str_tolower_buf(), osmo_str_toupper_buf() to provide
bounds-safe conversion, also able to safely convert a buffer in-place.
Introduce osmo_str_tolower(), osmo_str_toupper() that call the above _buf()
equivalents using a static buffer[128] and returning the resulting string
directly, convenient for direct printing. Possibly truncated but always safe.
Add unit tests to utils_test.c.
Replace all libosmocore uses of now deprecated osmo_str2lower().
Naming: the ctype.h API is called tolower() and toupper(), so just prepend
'osmo_str_' and don't separate 'to_lower'.
Change-Id: Ib0ee1206b9f31d7ba25c31f8008119ac55440797
In the past, the function ipa_ccm_idtag_parse() was used to parse
the payload of IPA CCM ID RESP packets. However, the function was
based on a possible misunderstanding of the message encoding, and
callers actually counted the first (upper) length nibble as part
of the header and passed a pointer to the second
(lower) length nibble of the first TLV into this function. As such,
it was unfixable, and had to be replaced with a new function called
ipa_ccm_id_resp_parse(). At the same time, we also add
ipa_ccm_id_get_parse() to parse the slightly different format of
the IPA CCM ID GET payload.
We can never be 100% sure what is "correct", as our understanding
of the protocol is entirely based on protocol analysis, without any
official documentation available.
This patch also introduces unit test coverage for both of the new
functions.
Revert "ipa: Add libosmogsm.map entry for ipa_ccm_idtag_parse_off"
This reverts commit 7f31c90b80.
Revert "ipa: Properly parse LV stream of a ID_GET request"
This reverts commit f558ed4bb9.
It introduced a function/behavior that was not originally intended:
The parse of IPA CCM ID GET (8bit length followed by 1 byte tag
and variable-length payload) instead of the IPA CCM ID RESP (16bit
length followed by 1 byte tag and variable-length payload).
Change-Id: I1834d90fbcdbfcb05f5b8cfe39bfe9543737ef8f
As oap_client has moved from osmo-sgsn to libosmogsm, it is only fair
that the related unit test shall also be moved here.
Change-Id: I9d64e10b4bacac9b530cf077841bad762fc6d558
This buffer verifies that all XMAXC fields must be zero before the
entire buffer is considered as silent by osmo_ecu_fr_conceal().
Change-Id: I14a192d001b5e167437cedbe76a1a3dd84dde35c
This makes it easy to debug how XMAXC fields are decreased every
iteration in osmo_ecu_fr_conceal().
Change-Id: I678d4be5e0b15b05873b0d3bf5ea5bbee7bef839
Recent OS#3407 shows that we should verify stderr to catch sanitizer failures.
(They might not always be ignorable like that one.)
Change-Id: Ic9e437a1cc96ae081e0fd6a9b6e3156987e14c0c
Multiplying the uint16_t x by itself seems to default to be calculated in
int32_t range, while it obviously needs uint32_t. This causes sporadic
sanitizer barfs:
Testing integer square-root
utils_test.c:445:18: runtime error: signed integer overflow: 60369 * 60369 cannot be represented in type 'int'
The final result is still correct, because it is in fact interpreted as uint32_t.
Cast to uint32_t to make sure the sanitizer doesn't complain.
Related: OS#3407
Change-Id: I83c14e38deaa466d977ee43c9420534ed90f090d
vty_test: add test against ambiguous cmd causing use-after-free and memory
leaks. Add this test along with the fix, because the new test triggers the
memory use-after-free and leaks, causing build failures.
Add cmd_deopt_with_ctx() to allow passing a specific talloc ctx.
is_cmd_ambiguous(): keep all cmd_deopt() allocations until the function exits.
Add a comment explaining why. Before this, if a command matched an optional
"[arg]" with square brackets, we would keep it in local var 'matched', but we
would free the string it points to at the end of that loop iteration; upon
encountering another match, we would attempt to strcmp against the freed
'matched'. Instead of adding hard-to-read and -verify free/alloc dances to keep
the 'matched' accurately freed/non-freed/..., just keep all cmd_deopt() string
allocated until done.
Needless to say that this should have been implemented on a lower level upon
inventing optional args, but at least this is fixing a program crash.
Related: OS#33903390
Change-Id: Ia71ba742108b5ff020997bfb612ad5eb30d04fcd
The conv_gen.py utility was tested against both Python 2 and 3,
so there is no need to enforce Python 2. Also, having:
#!/usr/local/bin/python{2|3}
is a bad idea, because Python may be installed in a different location.
Change-Id: I6007d481047b584db13d6eda70fb99f11f9ddaa1
This function can be used when there is only a part of GSM 04.80
message available - Facility IE, e.g. when a message is carried
over GSUP/MAP. Let's expose it.
Refactoring includes the following:
- adding the 'gsm0480_' prefix;
- correcting inverted return value;
- cosmetic code style changes.
Change-Id: I623c39ffbe6cdee65eade8435a2faa04d0da193e
In some cases, there is no need to parse the whole message,
e.g. during the conversion from DTAP to GSUP/MAP. This
function can be used to extract given IE from a message.
Change-Id: I3989d061903352473305f80712f1a1560d05df3d
In order to be able to transfer SS/USSD messages via GSUP,
this change introduces the following new message types:
- OSMO_GSUP_MSGT_PROC_SS_*,
and the following new IE:
- OSMO_GSUP_SS_INFO_IE
which represents an ASN.1 encoded MAP payload coming to/from
the mobile station 'as is', without any transcoding.
Change-Id: Ie17a78043a35fffbdd59e80fd2b2da39cce5e532
Related: OS#1597
Unlike TCAP/MAP, GSUP is just a transport layer without the
dialogue/context. This prevents us from having session based
communication, required e.g. for USSD. But we can emulate
TCAP dialogue by adding additional IEs, which would allow
to relate each message to a particular session.
This change introduces the following IEs:
- OSMO_GSUP_SESSION_ID_IE,
- OSMO_GSUP_SESSION_STATE_IE,
which optionally can be used to indicate that the message is
related to a session with given ID, and to manage session
state, i.e. initiate, continue, and finish.
Change-Id: I1cee271fed0284a134ffed103c0d4bebbcfde2a8
Related: OS#1597
Fixes following AddressSanitizer report during gea_test run with gcc
8.1.0:
==8899==ERROR: AddressSanitizer: dynamic-stack-buffer-overflow on address 0x7ffc5f1719bb at pc 0x7fe574adc5fe bp 0x7ffc5f171460 sp 0x7ffc5f171450
WRITE of size 1 at 0x7ffc5f1719bb thread T0
#0 0x7fe574adc5fd in osmo_store64be_ext ../../include/osmocom/core/bit64gen.h:75
#1 0x7fe574adc649 in osmo_store64be ../../include/osmocom/core/bit64gen.h:104
#2 0x7fe574ade936 in _kasumi_kgcore libosmocore/src/gsm/kasumi.c:186
#3 0x7fe574ae2532 in gea4 libosmocore/src/gsm/gea.c:44
#4 0x7fe574ae266c in gea3 libosmocore/src/gsm/gea.c:60
#5 0x7fe574a9b616 in gprs_cipher_run libosmocore/src/gsm/gprs_cipher_core.c:95
#6 0x56422d3fb2ee in test_gea libosmocore/tests/gea/gea_test.c:29
#7 0x56422d3fb506 in main libosmocore/tests/gea/gea_test.c:49
#8 0x7fe5730f406a in __libc_start_main (/usr/lib/libc.so.6+0x2306a)
#9 0x56422d3fadf9 in _start (libosmocore/tests/gea/.libs/lt-gea_test+0x1df9)
The kasumi_test is updated to calculate the entire array of bits
according to expected result. Before this commit it worked by writing
the entire last 64bit block, and addressSanitizer cannot catch it
because the allocated buffer is 64bit aligned too.
Change-Id: I7b2a0224a3b5527d5a3ad7e17efc73081b63eac1
Before this patch, osmo_hexdump is called stacked in th esame printf
function. As a result, the first returned buffer is overwriten by the
second, which means the printed buffers will show as the same always.
Change-Id: I364328a59da31537c6c9b969e34edd360b685081
Fixes following AddressSanitizer report:
==1983==ERROR: AddressSanitizer: dynamic-stack-buffer-overflow on address 0x7ffc245f47e6 at pc 0x7f3e2deea68c bp 0x7ffc245f4750 sp 0x7ffc245f4740
WRITE of size 1 at 0x7ffc245f47e6 thread T0
#0 0x7f3e2deea68b in osmo_nibble_shift_right libosmocore/src/bits.c:92
#1 0x55c01902e1ab in sh_chk libosmocore/tests/bits/bitrev_test.c:215
#2 0x55c01902ed8f in main libosmocore/tests/bits/bitrev_test.c:305
#3 0x7f3e2c93006a in __libc_start_main (/usr/lib/libc.so.6+0x2306a)
#4 0x55c01902c059 in _start (libosmocore/tests/bits/.libs/lt-bitrev_test+0x5059)
This patch can be seen as a follow-up of commit
4fd6023b03, which already fixed the
left-shift case in the same way.
Change-Id: I6e86d0164b7e982bf7b7449d5b3abfb3e1e5da46
Sometimes the library probiding dlopen is not the same one providing
dlsym.
This is the case when compiling with AddressSanitizer enabled. In this
case, AC_SEARCH_LIBS([dlopen]...) reports no lib is required, but tests
using dlsym still require to link against -ldl.
Change-Id: Ic619b0885688066b60c97caf1e2c7e5402c1d9f7
In recent Iaa20c59f624fbdc69a018cabd0f7e9c5a1389519 I fixed one missing init
issue and didn't notice the N other similar ones right next to it. Also fix the
remaining missing inits.
Fixes:
../../../../src/libosmocore/src/gsm/gsm0808_utils.c:187:8: runtime error: load of value 13, which is not a valid value for type '_Bool'
../../../../src/libosmocore/src/gsm/gsm0808_utils.c:191:8: runtime error: load of value 119, which is not a valid value for type '_Bool'
Related: OS#3148
Change-Id: Ie8a1a9b3132024135ca70390eae4d21c907b2edc
3GPP TS 48.058 has a very clear definition of which messages are
"transparent" and hence have the T-bit == 1. This is *not* just
all RLL messages, but basically only RLL_DATA.{ind,req} and
RLL_UNITDATA.{ind,req}. All other messages are non-transparent.
Change-Id: I9f83654af189d818563d799bf623325b7fee8e70
Closes: OS#3188
Provide comprehensive API to obtain string representations of Cell Identifiers
and -Lists.
Change gsm0808_test.c to use the new functions (which simplifies the output a
bit), so that we don't duplicate printing code in gsm0808_test.c, and so that
the not-so-trivial printing code is also tested.
In gsm0808_test, also test gsm0808_cell_id_list_name_buf()'s return value and
truncation behavior.
The rationale for gsm0808_cell_id_list_name(), i.e. printing an entire list of
cell identifiers, is that even though the maximum is 127 elements, a list of
more than a few elements is hardly ever expected in practice (even more than
one element isn't actually expected: either "entire BSS" or a single LAC). It
is thus useful to log the entire list when it shows up in Paging and Handover.
Change-Id: I9b2106805422f96c5cc96ebb9178451355582df3
The uninitialized members of enc_sc sporadically hit address sanitizer failure
during gsm0808_test, like:
../../../../src/libosmocore/src/gsm/gsm0808_utils.c:187:8: runtime error: load of value 13, which is not a valid value for type '_Bool'
../../../../src/libosmocore/src/gsm/gsm0808_utils.c:191:8: runtime error: load of value 119, which is not a valid value for type '_Bool'
How the test survived so long is a mystery to me; as soon as some uninitialized
members would by coincidence not be zero, the test should always have failed at
OSMO_ASSERT(memcmp(&enc_sc, &dec_sc, sizeof(enc_sc)) == 0).
Related: OS#3148
Change-Id: Iaa20c59f624fbdc69a018cabd0f7e9c5a1389519
Clarify semantics and micro-optimise for the case of single Cell Identifer IEs.
Test in gsm0808_test.c
So far we have gsm0808_enc_cell_id_list2(), but there also exist instances of
single Cell Identifiers (3GPP TS 48.008 3.2.2.17).
It is possible to decode the same using the cell identifier list API, but this
forces the caller to also keep a full struct gsm0808_cell_id_list2 with all its
127 entries around.
E.g. for handover, there are two Cell Identifiers (Serving and Target); I'd
need two full cell id lists for each, and these would be dynamically allocated
for each handover operation, whether it uses them or not.
Related: OS#2283 (inter-BSC HO, BSC side)
Change-Id: I9f9c528965775698ab62ac386af0516192c4b0cc
Allow passing multiple struct tlv_parsed in an array, to allow parsing as many
repeated IEs as are expected by the caller.
From tlv_parse(), call tlv_parse2() with dec_multiple = 1 to yield the previous
behavior. tlv_parse() remains valid API.
An example of multiple IEs is the BSSMAP Handover Request, containing Cell
Identifier (Serving) and Cell Identifier (Target), both defined by 3GPP TS
48.008 3.2.2.17 with identical IE tags; both are mandatory.
Related: OS#2283 (inter-BSC HO, BSC side)
Change-Id: Id04008eaf0a1cafdbdc11b7efc556e3035b1c84d
This will be used by the upcoming neighbor_ident API in osmo-bsc, where the vty
interface allows composing neihbor BSS cell identifier lists, and we want to
allow adding individual items from individual user commands.
It will also be useful to accumulate cell identifiers in case a subscriber sees
multiple alternative cells from a neighboring BSS, and we want to pass these on
to the MSC in a Handover Required.
Related: OS#2283 (inter-BSC HO, BSC side)
Change-Id: I5781f5fa5339c92ab2e2620489b002829d206925
In the osmo-msc, I would like to set the subscr conn FSM identifier by a string
format, to include the type of Complete Layer 3 that is taking place. I could
each time talloc a string and free it again. This API is more convenient.
From osmo_fsm_inst_update_id(), call osmo_fsm_inst_update_id_f() with "%s" (or
pass NULL).
Put the name updating into separate static update_name() function to clarify.
Adjust the error message for erratic ID: don't say "allocate", it might be from
an update. Adjust test expectation.
Change-Id: I76743a7642f2449fd33350691ac8ebbf4400371d
On erratic id in osmo_fsm_inst_update_id(), don't say "Attempting to allocate
FSM instance".
Escape the invalid id using osmo_quote_str().
Change-Id: I770fc460de21faa42b403f694e853e8da01c4bef
Since alloc relies on osmo_fsm_inst_update_id() to set the name, never skip
that.
In osmo_fsm_inst_alloc(), we allow passing a NULL id, and in
osmo_fsm_inst_update_id(), we set the name without id if id is NULL.
Change-Id: I6d6b09a811b82770818f19b189a57d9fc4a8133b
Place id and name testing in its separate section, test_id_api().
Add a test that actually allocates an FSM instance with a NULL id, which is
allowed, but uncovers a bug of an unset FSM instance name. osmo_fsm_inst_name()
falls back to the fsm struct's name on NULL, but osmo_fsm_inst_find_by_name()
fails to match if the instance's name is NULL (and until recently even
crashed). Show this in fsm_test.c with loud comments.
Add test to clear the id by passing NULL.
Add test for setting an empty id.
Add test for setting an invalid identifier (osmo_identifier_valid() == false).
Change-Id: I646ed918576ce196c395dc5f42a1507c52ace2c5
In fsm_test.c, we have FSM instance cleanup after the select main loop, but we
exit(0) in the timer cb; hence the final code is never called.
Rather clean up the instance and hence also test that, by using a global flag
to exit the main loop upon timeout.
Adjust expected stderr output.
BTW, in a subsequent commit, I want to move the fsm instance id testing to
below the main loop, to more clearly group the tested bits.
Change-Id: Ia47811ffcc1bd68d2630c86be7ab98fc1f338773
Rationale: with osmo_escape_str(), you get the escaped contents of the string,
but not so graceful handling of NULL strings. The caller needs to quote it, and
for NULL strings not quote it.
osmo_quote_str() is like osmo_escape_str() but always quotes a non-NULL string,
and for a NULL string returns a literal NULL, i.e. it should (tm) give the
exact C representation of a string.
That's useful in testing, to show exactly what char* situation we have, without
jumping through hoops like
if (str)
printf("\"%s\"", osmo_escape_str(str, -1));
else
printf("NULL");
Copy the unit test for osmo_escape_str() and adjust. To indicate that the
double quotes are returned by osmo_quote_str(), use single quotes in the test
printf()s.
I considered allowing to pick the quoting characters by further arguments, but
that complicates things: we'd need to escape the quoting characters. Just
hardcode double quotes like C.
Change-Id: I6f1b3709b32c23fc52f70ad9ecc9439c62b02a12
Ironically, when deprecating osmo_init_logging() in
I216837780e9405fdaec8059c63d10699c695b360, I forgot to change the callers
within libosmocore itself, i.e. in the various regression tests.
Change-Id: Ia36c248f99353d5baaa2533f46a2f60a8579bdf8
Add logging to root ctx, add msgb ctx to root ctx, free wqueue to simulate the
msgb being sent, and assert final talloc size.
Change-Id: Ief3d5e7b6c4d781b3854e230e45a67d5281b94cd
The CTRL interface has a ctrl_cmd_def_* API that allows deferring a CTRL
command reply until later. However, the command handling currently fails to
acknowledge this and deallocates the struct ctrl_cmd anyway.
Fix: in struct ctrl_cmd, add a defer pointer to be populated by
ctrl_cmd_def_make(). A cmd thus marked as deferred is not deallocated at the
end of command handling. This fix needs no change in calling code.
(Another idea was to return a different code than CTRL_CMD_HANDLED when the
command is to be deferred, but that would require adjusting each user of
ctrl_cmd_def_make(). The implicit marking is safer and easier.)
Show that handling deferred commands is fixed by adjusting the expectations of
ctrl_test.c's test_deferred_cmd() and removing the now obsolete exit_early
label.
One symptom of the breakage is that osmo-bts-sysmo crashes when asked to report
a trx's clock-info, which is aggravated by the fact that the sysmobts-mgr does
ask osmo-bts-sysmo for a clock-info.
The crash appears since Id583b413f8b8bd16e5cf92a8a9e8663903646381 -- it looked
like just fixing an obvious memory leak, which it did as shown by the unit
test, but deferred ctrl commands actually relied on that leak. Both fixed now.
Related: OS#3120
Change-Id: I24232be7dcf7be79f4def91ddc8b8f8005b56318
Handling a deferred command currently deallocates the struct ctrl_cmd upon
exiting the initial command handling, while it should actually stay around for
the asynchronous/deferred handling of the ctrl command.
Show the current bug by means of a ctrl test. The test will be adjusted to
expect the correct result when the bug is fixed in a subsequent commit
(I24232be7dcf7be79f4def91ddc8b8f8005b56318).
Change-Id: Ibbc847fc583bdd8e5e53a008258805e634ea12b4
Recent commit I77cd4b9142510c6914298b720d9c19ab68f9ebef left an obsolete
assertion around. It is already done in the if-body now.
Change-Id: I1bb2ea363e8a9d86b24338df3584abc93ebc6dd4
Use non-deprecated API to decode encode in gsm0808_enc_cell_id_list2().
Adjust gsm0808_test.c to now expect the correct results instead of previous
failure.
Change-Id: I1ce78883995e0d484368046b69db5afb2b4adc97
The test currently sets the MCC by a hex value, which is a weird choice. The
MCC gets BCD'd and hence we will see the decimal values 1:1 in the encoded
octets as hex digits. Using hex as input obscures that:
Right now it sets mcc = 0x123, which is actually 291 in decimal, and we hence
see "92 .1" in the expected BCD result. Using 0x124 in the test source actually
makes it hard to see where the 0x123 went.
Change the MCC to decimal notation (123, 124, 125) and adjust the expected
encoded output.
Change-Id: I973835c54a90fefe50d2b3581324d12556715f58
I am going to ehance the test to actually include leading-zero MNC, but first I
would like to simplify how the test source struct is initialized, before I edit
around in it.
Also, when the memcmp() fails, print hexdumps of expected and actual result for
comparison. I needed it to figure out a test failure, might as well keep it.
Change-Id: I77cd4b9142510c6914298b720d9c19ab68f9ebef
The speech codec defaults are not correct. The defaults recommended
in 3GPP TS 28.062, Table 7.11.3.1.3-2 are limited by 3GPP TS 48.008,
Section 3.2.2.103. Some defaults are actually reserved for future
use. Also the endianess of the 16 bit values is reversed.
- correct values so that they match the specification
- transmit bytes in the correct endianess
Change-Id: I6c3a34d39a375d71c4128fd38f06629e8b98b100
If the name stays the same the log messages will still log with the old
id. Since we can now change the id we need to update the name as well.
NULL as id was allowed before so we should allow that as well.
Change-Id: I6b01eb10b8a05fee3e4a5cdefdcf3ce9f79545b4
Since commit bf383a1d83 tlv_parse()
will return the first occurrence of a repeated IE. Add a test to
verify this behaviour. This test passes with the current code and
fails if bf383a1d83 is reverted.
While here, fix lies in documentation about the return value of tlv_parse()
and fix a typo in another comment.
Change-Id: I041f38548c5e4236920991d6c681c1c1e04de9ca
Related: OS#2904
Add a regression test which encodes and decodes a cell identifier
list of type CELL_IDENT_WHOLE_GLOBAL.
Change-Id: Ie633d9e55c6a30555c0153d35aaf9f982d6e0088
Depends: If0fafbc7171da2a3044bfa9a167208a1afa1c07b
Related: OS#2847
The implementation was entirely broken, reading data from wrong offsets
and always writing to the first element of the decoded list.
Also, add a new test for this function which found the problems.
Change-Id: If0fafbc7171da2a3044bfa9a167208a1afa1c07b
Related: OS#2847
Depends: Ife4e485e2b86c6f3321c9700611700115ad247b2
Cell ID lists with CI were misparsed because parse_cell_id_ci_list()
failed to report the amount of consumed bytes to its caller.
Also add a regression test which uncovered the bug.
Change-Id: Ife4e485e2b86c6f3321c9700611700115ad247b2
Depends: If6b941720de33dca66b6b1aa2cb95a3275708b7f
Related: OS#2847
This makes gsm0808_dec_cell_id_list() properly decode 3-digit MNCs.
Add a test which encodes/decodes a LAI_AND_LAC list with 3-digit MNCs.
Change-Id: If6b941720de33dca66b6b1aa2cb95a3275708b7f
Related: OS#2847
The cell ID list decoder merged in 11a4d9dd91
has a bug which was introduced part-way through the review process in
gerrit at https://gerrit.osmocom.org/#/c/6509/
When Neels suggested "why not just {...}id_list[MAXLEN] once?" I changed
the cell identifier list from a union of arrays to an array of unions.
After this change, elements smaller than the largest type in the union
were not laid out consecutively in memory anymore. E.g. uint16_t lac
values now occur at offsets of sizeof(id_list[0]) instead of offsets
of sizeof(uint16_t).
The problem is that I forgot to adjust the decoder accordingly, so the
decoder writes to the wrong offsets and returns cell identifier lists
which appear to contain uninitialized values when read back by API
consumers.
I found this problem while adding new regression tests to libosmocore to
test encoding and decoding. This commit adds one such tests for LAC list
decoding, which failed due to the above bug. I plan to write more tests,
however because this first test already uncovered a severe issue I chose
to submit a fix now and work on additional tests in later commits.
Change-Id: Ie1a5a9d858226be578cf11a03cf996d509bd51fb
Related: OS#2847
Introduce gsm0808_dec_cell_id_list2() with supports additional types of
cell identifier lists. The new parsing routines are based on similar
routines used by the paging code in osmo-bsc's osmo_bsc_bssap.c.
Likewise, introduce gsm0808_enc_cell_id_list2() with support for the
same additional types of cell identifier lists.
The old API using struct gsm0808_cell_id_list is deprecated.
The previous definition was insufficient because it assumed that all
decoded cell ID types could be represented with a single uint16_t.
It was declared in a GSM protocol header (gsm/protocol/gsm_08_08.h)
despite being a host-side representation of data in an IE.
The only user I am aware of is in osmo-msc, where this struct is used
for one local variable. osmo-msc releases >= 1.1.0 make use of this API.
While here, fix a small bug in a test:
test_gsm0808_enc_dec_cell_id_list_bss() set the cell ID type to 'LAC'
but obviously wants to use type 'BSS'.
Change-Id: Ib7e754f538df0c83298a3c958b4e15a32fcb8abb
Related: OS#2847
In osmo_mnc_from_str() do not try to return some values even if the validation
fails; hence don't try to decode a NULL pointer. That whole idea was half-baked
and a can of worms to begin with.
Change-Id: Ibaaa128ac60b941a015a31134eb52aef56bc6e22
In certain builds (for me a build with no -O2 flag) the recently added
gsm23003_test test_mnc_from_str() fails, because bcmp() compares all bytes of
sizeof(struct test_mnc_from_str_result), which has valid data for 7 bytes plus
one padding byte that may contain arbitrary values. Instead of bcmp(), rather
compare the actual members one by one.
Change-Id: I28b28457c7b0462c950612fd9b87b5c7181d8bad
osmo_mnc_from_str() preserves leading zeros in the string and is useful for
VTY config parsing (osmo-bsc, osmo-msc, osmo-sgsn, osmo-pcu).
osmo_{plmn,mnc}_cmp() takes care of the slight intricacy of ignoring the 3-digit flag
if the MNC is anyway >99. Will be used by osmo-sgsn.git and osmo-bsc.git. (All
current users just care about identical MNC, but a proper cmp doesn't hurt.)
Change-Id: Ib7176b1d65a03b76f41f94bc9d3293a8a07d24c6
Note that on the input side, the 3-digits flag may be left false when the MNC
is >99 anyway. On the decoded side, the flag is set accurately.
Change-Id: I89765613d8c5bd939a6957f7443ac88475f1b93c
Event names are displayed in VTY commands so all FSM should have them.
Print an error message if an FSM is registered without event names.
We could also return an error code, however at present no caller checks
the return value of osmo_fsm_register() so this would be pointless.
Add event names to the test FSM and update expected output accordingly.
Change-Id: I08b100d62b5c50bf025ef87d31ea39072539cf37
Related: OS#3008
For all other decode operations we report the BER, but not for the
RACH. This results in osmo-bts-trx not being able to report BER
to the higher layers, which is possible on other BTS backends.
Let's close this gap by introducing gsm0503_rach_ext_decode_ber()
and gsm0503_rach_decode_ber() with the usual n_errors / n_bits_total
arguments.
Change-Id: I2b1926a37bde860dcfeb0d613eb55a71271928c5
It seems with default flags in_buf was being memzeroed by the compiler.
When compiling with -O0, that's not the case anymore and printf prints
after first 16 bytes, printing extra garbage which doesn't match the
expected output.
Change-Id: I736c1e4d625f647d3bb794fa717256e9dbf36e87
inline keyword is a hint for the compiler to inline the function, but
it's not mandatory. If no static or extern is specified, the definition
is only visible in the current unit but the identifier still has
external linkage.
When running with -O0 it seems the compiler (gcc 7.2.1) decides to use
the external linkage but at the same time it seems it's not generating
the function symbol. Fix it by explicitly stating that we want to use
static linking for this function.
coding/coding_test.o: In function `test_xcch':
libosmocore/tests/coding/coding_test.c:86: undefined reference to `dump_ubits'
libosmocore/tests/coding/coding_test.c:87: undefined reference to `dump_sbits'
Change-Id: I18018adec05ce1c2ddbca38653311d74c7454ce8
* match return type of osmo_gsup_encode() with osmo_gsup_decode() to allow
propagating error to caller
* check return value of osmo_gsup_encode() in GSUP test
* return errors instead of braking app with aseert
Change-Id: Idaa1deecb6d9e15329bd51867b4f6a03357461f0
Related: OS#2864
Instead of forcing test failure via assert on first error encountered,
let it run until completion and print detailed error log. This
simplifies troubleshooting by letting user to see more errors from
single run and more details on each of the errors. Update test output
with explicit test results.
Change-Id: I016a28fe04f7b194e22c15e936095004c5f079d1
Previously an incorrect length value was passed to both
gsm_7bit_decode_n_ussd() and gsm_7bit_encode_n_ussd()
functions during test_7bit_ussd() execution, due to:
octets_written = strlen(decoded);
The problem is that a 7-bit encoded string takes less memory
than its 8-bit equivalent. So, here strlen() returns one-byte
bigger value, that octets_written is. This then causes the
uninitialized memory access.
Found using Valgrind:
Conditional jump or move depends on uninitialised value(s)
at 0x506DCCC: gsm_7bit_decode_n_ussd (gsm_utils.c:248)
by 0x40134B: test_7bit_ussd (ussd_test.c:104)
by 0x400F5D: main (ussd_test.c:161)
Conditional jump or move depends on uninitialised value(s)
at 0x506DBB7: gsm_7bit_decode_n_hdr (gsm_utils.c:220)
by 0x506DC9E: gsm_7bit_decode_n_ussd (gsm_utils.c:246)
by 0x40134B: test_7bit_ussd (ussd_test.c:104)
by 0x400F5D: main (ussd_test.c:161)
Conditional jump or move depends on uninitialised value(s)
at 0x506DBCB: gsm_septet_lookup (gsm_utils.c:153)
by 0x506DBCB: gsm_7bit_decode_n_hdr (gsm_utils.c:224)
by 0x506DC9E: gsm_7bit_decode_n_ussd (gsm_utils.c:246)
by 0x40134B: test_7bit_ussd (ussd_test.c:104)
by 0x400F5D: main (ussd_test.c:161)
Change-Id: Ic31805b6a5a917dfc6284edba6ffdd21246ac20c
The sercomm functions are unavailable in case of embedded build. Add
stub and link the tests against it.
Change-Id: I9bc5cb2f822b1a3ffdc6ec29f46b6bac8288314e
As of 67bdd80a96 the stats.c is
effectively disable so we should disable the corresponding tests as
well.
Change-Id: I42ff7a6619c0a5926fdc2ec779cf04689c567e15
Previously the same length value was used for both ussd_request
and interrogate_ss payloads, despite they are different.
Change-Id: I90ae7c51b75dcdb9d8ee042af23d127e6db8771d
When a bad GSM voice frame is received, it's being replaced
by a silence frame. This may cause unpleasant audio effects.
This change implements a functionality to craft a replacement
frame from the last known good frame. Currently, only FR is
supported, support for other codecs may be added latter.
Change-Id: I06a21f60db01bfe1c2b838f93866fad1d53fdcd1
Add gsm48_encode_ra() which takes appropriate struct as [out] parameter
instead of generic buffer. Using uint8_t buffer instead of proper struct
type prooved to be error-prone - see Coverity CID57877, CID57876.
Old gsm48_construct_ra() is made into tiny wrapper around new
function. The test output is adjusted because of the change in function
return value which was constant and hence ignored anyway.
Related: OS#1640
Change-Id: I31f9605277f4945f207c2c44ff82e62399f8db74
Validate that incoming CTRL commands...
- have decimal IDs,
- return error on trailing characters,
- have invalid characters in variable identifiers,
- send detailed error messages as reply to the requestor.
Adjust ctrl_test.{c,ok}, which best show the change in behavior.
Message handling causes log messages on stderr; previously, stderr was empty.
Add '[ignore]' in testsuite.at so that the nonempty stderr doesn't cause test
failures.
Change-Id: I96a9b6b6a3a5e0b80513aa9eaa727ae8c9c7d7a1
Recent patch I563764af1d28043e909234ebb048239125ce6ecd introduced returning
NULL from rate_ctr_group_alloc() when the index passed already exists.
Instead of returning NULL, find an unused group index and use that, adjust the
error message.
In stats_test.c, adjust, and also assert allocated counter group indexes
everywhere.
Rationale:
The original patch causes osmo-sgsn to crash as soon as the second subscriber
attempts to establish an MM context. Of course osmo-sgsn is wrong to a) fail to
check a NULL return value and crash and b) to fail to allocate an MM context
just because the rate counter group could not be allocated (it still rejects
the MM context completely if rate_ctr_group_alloc() fails).
Nevertheless, the price we pay for rate counter correctness is, at least in
this instance, way too high: osmo-sgsn becomes completely unusable for more
than one subscriber.
Numerous other places exist where rate_ctr_group_alloc() is called with a
constant index number; from a quick grep magic I found these possible breaking
points:
osmo-sgsn/src/gprs/gb_proxy.c:1431: cfg->ctrg = rate_ctr_group_alloc(tall_bsc_ctx, &global_ctrg_desc, 0);
osmo-sgsn/src/gprs/gprs_sgsn.c:139: sgsn->rate_ctrs = rate_ctr_group_alloc(tall_bsc_ctx, &sgsn_ctrg_desc, 0);
osmo-sgsn/src/gprs/gprs_sgsn.c:270: ctx->ctrg = rate_ctr_group_alloc(ctx, &mmctx_ctrg_desc, 0);
osmo-sgsn/src/gprs/gtphub.c:888: b->counters_io = rate_ctr_group_alloc(osmo_gtphub_ctx,
>phub_ctrg_io_desc, 0);
osmo-bsc/src/libfilter/bsc_msg_acc.c:87: lst->stats = rate_ctr_group_alloc(lst, &bsc_cfg_acc_list_desc, 0);
osmo-pcu/src/bts.cpp:228: m_ratectrs = rate_ctr_group_alloc(tall_pcu_ctx, &bts_ctrg_desc, 0);
osmo-pcu/src/tbf.cpp:793: tbf->m_ctrs = rate_ctr_group_alloc(tbf, &tbf_ctrg_desc, 0);
osmo-pcu/src/tbf.cpp:879: tbf->m_ul_egprs_ctrs = rate_ctr_group_alloc(tbf, &tbf_ul_egprs_ctrg_desc, 0);
osmo-pcu/src/tbf.cpp:880: tbf->m_ul_gprs_ctrs = rate_ctr_group_alloc(tbf, &tbf_ul_gprs_ctrg_desc, 0);
osmo-pcu/src/tbf.cpp:970: tbf->m_dl_egprs_ctrs = rate_ctr_group_alloc(tbf, &tbf_dl_egprs_ctrg_desc, 0);
osmo-pcu/src/tbf.cpp:977: tbf->m_dl_gprs_ctrs = rate_ctr_group_alloc(tbf, &tbf_dl_gprs_ctrg_desc, 0);
osmo-pcu/src/tbf.cpp:1475: ul_tbf->m_ctrs = rate_ctr_group_alloc(ul_tbf, &tbf_ctrg_desc, 0);
osmo-pcu/src/bts.cpp:226: m_ratectrs = rate_ctr_group_alloc(tall_pcu_ctx, &bts_ctrg_desc, 1);
We can fix all of these callers and then reconsider returning NULL, but IMO
even into the future, rate counter group indexes are not something worth
failing to provide service for. For future bugs we should keep the automatic
index picking in case of index collisions. We will get an error message barfed
and can fix the issue in our own time, while the application remains completely
usable, and even the rate counters can still be queried (at wrong indexes, but
life is tough).
Related: I49aa95b610f2faec52dede2e4816da47ca1dfb14 (osmo-sgsn's segfault)
Change-Id: Iba6e41b8eeaea5ff6ed862bab3f34a62ab976914
The recently added ctrl_cmd_parse2() returns non-NULL cmd with error messages
upon parsing errors. In handle_control_read(), use ctrl_cmd_parse2() and send
those back to the CTRL command sender as reply.
Retain the previous "Command parser error" reply only in case ctrl_cmd_parse2()
should return NULL, which shouldn't actually happen at all.
Change-Id: Ie35a02555b76913bb12734a76fc40fde7ffb244d
In ctrl_handle_msg() (code recently propagated from handle_control_read()),
talloc_free() the parsed ctrl_cmd in all code paths. In particular, a free was
missing in case ctrl_cmd_handle() returns CTRL_CMD_HANDLED.
CTRL_CMD_HANDLED is triggered by GET_REPLY / SET_REPLY parsing, as show by
ctrl_test.c. With the memleak fixed, adjust expected test output and make a
detected mem leak abort the test immediately.
Change-Id: Id583b413f8b8bd16e5cf92a8a9e8663903646381
The "memleak!" output shows messages that lack a talloc_free() of the parsed
ctrl command buffer. The leak shall be fixed in a subsequent patch.
Change-Id: I2c3e4d08b769b9cd77593362ea36a28d681cd042
To report invalid characters in identifiers, it is desirable to escape any
weird characters. Otherwise we might print stray newlines or control characters
in the log output.
ctrl_test.c already uses a print_escaped() function, which will be replaced by
osmo_escape_str() in a subsequent patch.
control_cmd.c will use osmo_escape_str() to log invalid identifiers.
Change-Id: Ic685eb63dead3967d01aaa4f1e9899e5461ca49a
Check that no group with the given name and index already exist before
allocating it. Add corresponding test case.
Change-Id: I563764af1d28043e909234ebb048239125ce6ecd
Related: OS#2757
The Cause IE in the 08.08 CIPHER MODE REJECT is a normal TLV IE,
and not just a value. Let's make sure we encode the cause value
properly.
Change-Id: I4f5b231edf6dcb0a9c2bbafb2a59f301f3b2402b
Closes: OS#2766
Some Abis/RSL messages such as "Release Indication" contained 3 extra
bytes from an L3 Information header which should not be there according
to specs in GSM 08.58 (section 8.3 "Radio link layer management
messages"). Other RSL messages were affected by the same issue, except
for "Establish Indication", which had already a workaround in
send_rslms_dlsap.
This commit fixes the issue in a generic way, removes the "Establish
Indication" and fixes the test accounting for the bug, as it otherwise
fails after applying the changes.
Fixes: OS#1635, OS#2336
Change-Id: Ibb116214e8b1798d65a8b0917150496a3c14f344
This was always intended to be GPL and not AGPL. "kat" did the
development as part of an internship paid by me and we agreed
to shared copyright.
Change-Id: Ied2041ba20c5737bd967dfaa3017edf72a95b31c
The external sercomm_drv_[un]lock() functions are defined as stubs in
case of non-embedded build only which causes linking issue with
sercomm_test. Let's define the same stubs in sercomm_test
unconditionally - the implementation details of the locking are
irrelevant for the test anyway.
Related: OS#2708
Change-Id: I3dab4f3348871b66b5d6c9fd10b2e448c61f9e73
In case of embedded build some tests are failing to link properly. Fix
it:
* do not run fsm_test unless CTRL is enabled
* do not run fr_test unless GB is enabled
* do not link loggingrb_test with libosmovty
Change-Id: Icedad5ba3ed311ccdb97fa3ccd3002f5fda8be68
* remove duplicate code: use function from libosmocore
* use utility function to dump ubits
* reformat for easier reading
* link against libosmocore
Change-Id: I8c31b0954176a2c53305936a025c92a793b6d9b6
This should fix the last current remaining sanitizer build failure in
libosmocore regression tests.
Helps fix sanitizer build on debian 9.
Change-Id: I4d6dd7f4348675bc77d4df5a7a0ce41f12d4a043
All successful and all error code paths of bssgp_fc_in() free the msgb, except
the code path calling fc_enqueue() when the msg is dropped (due to queue being
full, or failure to allocate).
Callers could theoretically catch the -ENOSPC return value and discard the
msgb. However, in other code paths, a callback's return value is returned,
which is expected to free the msgb, so such callback would have to never return
-ENOSPC when it freed the msgb. Much simpler semantics would be to free the
msgb in every code path, no matter which kind of error occurred.
Who is currently calling bssgp_fc_in and how do they handle the return value?
- bssgp_fc_test.c ignores the return value (and hits a mem leak aka sanitizer
build failure if the queue is full).
- fc_timer_cb() ignores the return value.
- bssgp_tx_dl_ud() returns the bssgp_fc_in() rc.
- which is returned by a cascade of functions leading up to being returned,
for example, by gprs_llgmm_reset(), which is usually called with ignored
return code.
At this point it is already fairly clear that bssgp_fc_in() should always free
the msgb, since the callers don't seem to distinguish even between error or
success, let alone between -ENOSPC or other errors.
bssgp_fc_test: assert that no msgbs remain unfreed after the tests.
Adjust expected results.
Helps fix sanitizer build on debian 9.
Change-Id: I00c62a104baeaad6a85883c380259c469aebf0df
Print remaining msgbs when done, then free the entire tall_msgb_context. To be
able to do that, call msgb_talloc_ctx_init() and use its return value.
A subsequent patch will fix a known mem leak and add assertions for 0b in 1
blocks remaining in the tall_msgb_context.
Helps fix sanitizer build on debian 9.
Change-Id: I67d347ab2642b0bfc27b21b44231a7f3146ff641
The test fills up the queue / sends too large PDUs on purpose. Make that
obvious by outputting returned errors in the expected output.
Cosmetic:
- fc_in()'s return value is ignored, hence don't return anything.
- add comment.
Change-Id: I57d6fce2515a65f6dd037e75af5397079215cb46
Ever since this test was changed to use osmo_gettimeofday_override, the times
it sees are exact every time and don't need rounding to pass the expected
output.
Change-Id: I4a9a5d31fc02eb55caf7ba9c141426d8115bb740
Remove initial msgb talloc context creation: if we create a root ctx for msgb
that all msgb are allocated in, we would in a final cleanup discard all msgbs,
i.e. we would not verify that all msgb are cleaned up properly.
If we create the msgb context and *don't* clean it up in the end, the sanitizer
build fails because the context root is not cleaned up.
Easiest is to actually allocate all msgb at NULL ctx, because then any msgb
that aren't cleaned up properly would still linger, while we don't leave a root
ctx that we need to clean up either.
Helps fix sanitizer build on debian 9.
Change-Id: I1f2d1d05c75bbf4d92787f9735083f18cdc90f6f
The testsuite fails on some specific build machines in the OBS
build cluster. Let's try to figure out which CPU flags they have
to narrow down the cause of this.
Change-Id: Ib23e5bfb3c894206fad62d6cc6151583b1bb75a6
Let's fix some erroneous/accidential references to wrong license,
update copyright information where applicable and introduce a
SPDX-License-Identifier to all files.
Change-Id: I39af26c6aaaf5c926966391f6565fc5936be21af
According to
https://www.gnu.org/software/automake/manual/automake.html#Libtool-Flags
the libraries supposed to be added to *_LDADD or *_LIBADD
while *_LDFLAGS should contain additional libtool linking
flags. Previously we used both. Let's unify this and move all the
libraries into proper automake variable. While at it - also add
libosmocore.la for tests to LDADD since all the tests link against it
anyway.
Change-Id: Ia657a66db75df831421af5df1175a992da5ba80f
Sounds stupid, but we actually didn't support hex nibbles in one of
the two directions of the conversion, so let's make sure we test for
this.
Change-Id: I8445da54cc4f9b1cd64f286c2b238f4f7c87accb
In Change-Id Ifc6ac824f5dae9a848bb4a5d067c64a69eb40b56 we introduce
name mangling to replace any '.' in counter (group) names to be
converted to ':'. Let's test for this functionality explicitly as part
of the stats_test.
Change-Id: Ie35682aa79526e2ffeab6995cd640b7847d855bf
The rate_ctr.c code would do this mangling automatically, but let's
avoid using this from new versions of our code for
simplicity/explicitness.
Change-Id: I24a556f447cfac25efb6e83cac2d0c2972d98fe3
As rate counters are automatically exposed on the CTRL interface,
we need to make sure they don't contain special characters such as '.'
which are not permitted/supported by CTRL.
In order to be able to run old versions of osmocom programs with
libosmocore versions after this commit, we introduce some special
name mangling: Any '.' in the names are replaced with ':' during
counter group registration, if valid identifiers can be obtained
this way.
Change-Id: Ifc6ac824f5dae9a848bb4a5d067c64a69eb40b56
* introduce defines with NS state names
* use them for vty and tests
* expand test output to print complete NS state
Change-Id: I69f8d536135ae76dbca623c2f1ffba625adcb1e9
Related: SYS#3610
This function is actively used by OsmoPCU but have not been covered by
tests so far. The test code is based on
Minh-Quang Nguyen <minh-quang.nguyen@nutaq.com> submission with some
modifications.
The test's FIXME will be addressed in follow-up patches.
Change-Id: I2ee544256b8675bc62a42493aab66a8eeee54f90
Related: OS#1526
In ASCII string based protocols it a printf() version that prints
directly to the message buffer may be useful.
Add function msgb_printf(), make sure that msg buffer bounderies
are not exceeded. If the end of the tail buffer is hit, return
with an error code.
Change-Id: I15e1af68616309555d0ed9ac5da027c9833d42e3
Previously it would crash on NULL input. Let's handle it gracefully
instead. Corresponding test case is also added.
Change-Id: I587153e49d1c92128fac3ae5c124adba9592378e
No callers that would pass NULL exist, but let's check against NULL from the
start.
Fixup for recent change I1e94f5b0717b947d2a7a7d36bacdf04a75cb3522.
Change-Id: I111fbf29228929f2cd6ffa06bcb1f69da223224e
Add GSM23003_IMSI_MIN_DIGITS definition.
Add regression test gsm23003_test.c to test the two new functions.
Will be used by OsmoHLR to validate VTY and CTRL input.
Change-Id: I1e94f5b0717b947d2a7a7d36bacdf04a75cb3522
This uncovers some interesting behavior of the CTRL interface which we may want
to guard against in subsequent patches: trailing whitespace, ignored tokens,
special characters as cmd->id.
Change-Id: If7af06d50ca71fd528b08cd70310774d5a53f0f7
In many callers of the VTY API, we are lacking the vty_install_default() step
at certain node levels. This creates nodes that lack the 'exit' command, and
hence the only way to exit such a node is to restart the telnet session.
Historically, the VTY looked for missing commands on the immediate parent node,
and hence possibly found the parent's 'exit' command when the local node was
missing it. That is why we so far did not notice the missing default commands.
Furthermore, some callers call install_default() instead of
vty_install_default(). Only vty_install_default() also includes the 'exit' and
'end' commands. There is no reason why there are two sets of default commands.
To end this confusion, to catch all missing 'exit' commands and to prevent this
from re-appearing in the future, simply *always* install all default commands
implicitly when calling install_node().
In cmd_init(), there are some top-level nodes that apparently do not want the
default commands installed. Keep those the way they are, by changing the
invocation to new install_node_bare() ({VIEW,AUTH,AUTH_ENABLE}_NODE).
Make both install_default() and vty_install_default() no-ops so that users of
the API may still call them without harm. Do not yet deprecate yet, which
follows in Icf5d83f641e838cebcccc635a043e94ba352abff.
Drop all invocations to these two functions found in libosmocore.
Change-Id: I5021c64a787b63314e0f2f1cba0b8fc7bff4f09b
In vty_test, add three levels of parent nodes (level1, level2, level3) with
each having a leaf child (child1, child2, child3).
Use these to enhance the vty_test cfg files and test more diverse situations.
The current VTY code expects a go_parent_cb() to be present, otherwise it will
bump right back to the CONFIG_NODE, which will not work with more than one node
level below the CONFIG_NODE. Hence provide a minimal go_parent_cb().
Change-Id: Ib9bcf58b655fbd85e196f363fb7d8305d7dfc997
The recent exit-by-indent patch breaks a VTY case where a node is entered but
directly followed by a sibling or ancestor without listing any child nodes.
Regression introduced by I24cbb3f6de111f2d31110c3c484c066f1153aac9.
An example is a common usage in osmo-bts, where 'phy N' / 'instance N' is a
parent node that is commonly left empty:
phy 0
instance 0
bts 0
band 1800
Before this patch, this case produces the error:
There is no such command.
Error occurred during reading the below line:
bts 0
Fix indentation parsing logic in command.c to accomodate this case.
Add a unit test for empty parent node.
Change-Id: Ia0880a17ae55accb092ae8585cc3a1bec9986891
Note: This will break users' config files if they do not use consistent
indenting. (see below for a definition of "consistent".)
When reading VTY commands from a file, use indenting as means to implicitly
exit child nodes. Do not look for commands in the parent node implicitly.
The VTY so far implies 'exit' commands if a VTY line cannot be parsed on the
current node, but succeeds on the parent node. That is the mechanism by which
our VTY config files do not need 'exit' at the end of each child node.
We've hit problems with this in the following scenarios, which will show
improved user experience after this patch:
*) When both a parent and its child node have commands with identical names:
cs7 instace 0
point-code 1.2.3
sccp-address osmo-msc
point-code 0.0.1
If I put the parent's command below the child, it is still interpreted in the
context of the child node:
cs7 instace 0
sccp-address osmo-msc
point-code 0.0.1
point-code 1.2.3
Though the indenting lets me assume I am setting the cs7 instance's global PC
to 1.2.3, I'm actually overwriting osmo-msc's PC with 1.2.3 and discarding the
0.0.1.
*) When a software change moves a VTY command from a child to a parent. Say
'timezone' moved from 'bts' to 'network' level:
network
timezone 1 2
Say a user still has an old config file with 'timezone' on the child level:
network
bts 0
timezone 1 2
trx 0
The user would expect an error message that 'timezone' is invalid on the 'bts'
level. Instead, the VTY finds the parent node's 'timezone', steps out of 'bts'
to the 'network' level, and instead says that the 'trx' command does not exist.
Format:
Consistent means that two adjacent indenting lines have the exact
same indenting characters for the common length:
Weird mix if you ask me, but correct and consistent:
ROOT
<space>PARENT
<space><tab><space>CHILD
<space><tab><space><tab><tab>GRANDCHILD
<space><tab><space><tab><tab>GRANDCHILD2
<space>SIBLING
Inconsistent:
ROOT
<space>PARENT
<tab><space>CHILD
<space><space><tab>GRANDCHILD
<space><tab><tab>GRANDCHILD2
<tab>SIBLING
Also, when going back to a parent level, the exact same indenting must be used
as before in that node:
Incorrect:
ROOT
<tab>PARENT
<tab><tab><tab>CHILD
<tab><tab>SIBLING
As not really intended side effect, it is also permitted to indent the entire
file starting from the root level. We could guard against it but there's no
harm:
Correct and consistent:
<tab>ROOT
<tab><tab>PARENT
<tab><tab><tab><tab>CHILD
<tab><tab>SIBLING
Implementation:
Track parent nodes state: whenever a command enters a child node, push a parent
node onto an llist to remember the exact indentation characters used for that
level.
As soon as the first line on a child node is parsed, remember this new
indentation (which must have a longer strlen() than its parent level) to apply
to all remaining child siblings and grandchildren.
If the amount of spaces that indent a following VTY command are less than this
expected indentation, call vty_go_parent() until it matches up.
At any level, if the common length of indentation characters mismatch, abort
parsing in error.
Transitions to child node are spread across VTY implementations and are hard to
change. But transitions to the parent node are all handled by vty_go_parent().
By popping a parent from the list of parents in vty_go_parent(), we can also
detect that a command has changed the node without changing the parent, hence
it must have stepped into a child node, and we can push a parent frame.
The behavior on the interactive telnet VTY remains unchanged.
Change-Id: I24cbb3f6de111f2d31110c3c484c066f1153aac9
For interactive telnet VTY, remove the implicit move up to the parent node when
a command did not succeed on the current node level.
When reading config files, this behavior was useful to allow skipping explicit
'exit' commands. (A different patch deals with that.)
In the telnet VTY, this behavior was never necessary. Explicit 'exit' commands
can move to the parent node, and typically uninformed users expect to require
that.
On a telnet VTY, counting indents like for reading config files is not an
option: a user will always type from the first column or may paste some leading
spaces without intended meaning.
After this patch, it is thus no longer possible to paste a complete config
across several node levels directly to a telnet session, unless it contains
'exit' commands.
Change-Id: Id73cba2dd34676bad8a130e9c45e67a272f19588
When doing UMTS AKA with AUTS, it can be interesting to know the SQN.MS that
was encoded in the AUTS. The only way to know this is to provide it as a
separate out-parameter from milenage_gen_vec_auts(), because the SQN.MS from
AUTS stored in umts.sqn is immediately modified non-trivially by
milenage_gen_vec(). Add sqn_ms to struct osmo_sub_auth_data to retain SQN.MS
even after a vector was generated.
Use this to print out SQN.MS for 'osmo-auc-gen -3 -A'.
Adjust test suite expectations.
Related: OS#2464
Change-Id: I9fc05bbf169d06716f40b995154fd42a3f91bef3
Make ind_mask available in the main(){} scope, in order to print out
IND = SQN & ind_mask.
Adjust test suite expectations.
Related: OS#2465
Change-Id: I91eac53c4af66a58b9372d9baf5781fc9f29b1fc
osmo-auc-gen so far does not allow indicating the IND bit length of SQN. A
default of 5 serves most practical cases, nevertheless we should allow passing
arbitrary IND lengths.
Enhance the test suite to test --ind-len.
Related: OS#2465
Change-Id: Ia1d8b6a823ffc92290b3e39e4e4665aeff80ccc0
During UMTS AKA, the caller typically indicates which IND slot the next used
SQN should belong to. Without this option, osmo-auc-gen will always produce SQN
from IND-slot 0. Add --ind option.
Enhance the osmo-auc-gen_test.sh to expect errors with useful printouts on
stderr, and add tests that verify valid --ind ranges.
Related: OS#2465
Change-Id: Ib60eec80d58ca9a0a01e7fbd2bcbbd4339b1a6d8
Most USIM out there seem to use IND-length = 5 bits, so do sysmousim-sjs1.
Currently from initialization we are using an IND length of zero in
osmo-auc-gen, which produces confusing SQN results after AUTS:
Where want SQN to be incremented to the next IND array, usually +32, an IND-len
of 0 makes for only +1.
As result, the osmo-auc-gen_test.sh produces SQN 32 instead of 24 after
receiving SQN.MS = 23 from AUTS: adjust test expectations.
Related: OS#2465
Change-Id: I9fcc11fa2b5816302dcc6b72249b1ee40d5a61f5
osmo-auc-gen tries to be helpful by deriving the SQN.MS from the SQN that
resulted from AUTS + milenage_gen_vec(), but there is actually no way to derive
the actual AUTS SQN.MS from the resulting SQN.
Completely drop the printout to prevent confusion.
Adjust test suite expectations.
Related: OS#2464
Change-Id: Ie2432c6d6a23818f7b3a29b1295dcbb505e2be53
These PRBS sequences are specified in ITU-T O.150. They are typically
used as test data to be transmitted for BER (bit error rate) testing.
Change-Id: I227b6a6e86a251460ecb816afa9a7439d5fb94d1
These fields can be in the ISD and the PDP Context inofmration. Store
pointers to this IE in both cases. It needs to be used by the SGSN
when opening a PDP context.
Change-Id: Iedc7c02adcf77ca5c9545119e19c968dfbbb3e6b
In a string like
127.0.0.1:2905<->127.0.0.1:60661
it is hard to tell which is the local part. I'd have expected it on the left,
but it is actually on the right.
To avoid doubt and bypass bikesheds on which side should be what, clearly mark
the two sides as remote and local.
(r=127.0.0.1:2905<->l=127.0.0.1:60661)
Change-Id: I43dcc6a1906429bd0955fd7fe2eb5b8495b592d8
The implementation of the parser/generator for the speech codec
information element slightly wrong, making it impossible to use
it properly.
(See also: 3GPP TS 48.008, 3.2.2.103)
Change-Id: Idabb0f9620659557672e1c6b90c75481192e5c89
This way we clean the build of warnings completely and we can enable
-Werror but we still see this FIXME message while compiling.
Change-Id: I24c11226cd5bb5b6032f4ece7d1a0695dc82f0dd
Several warnings like the one below are fixed:
warning: array subscript is below array bounds [-Warray-bounds]
uint8_t *unchanged_ptr = buf - 1;
Change-Id: I35d7d926939c14700cbca732bd64e588c75424b4
Commit 0d4e949e22 changed the code to use
functions with local variables holding the bytes, but forgot to remove
the old global variables.
This test fixes compilation warnings.
Change-Id: I140de30038222b0419423d8c4f9da1946651a4e7
According to GCC's online docs:
When an inline function is not static, then the compiler must
assume that there may be calls from other source files; since
a global symbol can be defined only once in any program, the
function must not be defined in the other source files, so the
calls therein cannot be integrated. Therefore, a non-static
inline function is always compiled on its own in the usual fashion.
There is no any (performance or size) benefit from 'inline' keyword
in this particular file, so let's replace one by 'static'.
Change-Id: I11e1f1cfea09c6f0cf8225239e782b551d3eb52f
Based on ETSI TS 101 318 section 5.1.2 the 95 bits SID code word
is not detected correctly due to a wrongful offset in the bits
location indexes.
Change-Id: I45d98c6edf267f313883503a65385190ffbc65ca
We need to have an architecture-independend way of endian conversion /
byte swapping functions which will also work on embedded (bare iron)
builds. Let's introduce osmocom/core/bytesawp.h for this purpose.
Change-Id: Ibc0cc1e36d4ed63a35cf8ceff3af0f26e5ac7a3d
Previously the 'passed' variable in test_expansion() was being
overwritten on every call of _compare_mem(), so only the result
of last call influenced the test result.
Change-Id: Ibf3ab453c20c7eeec234b95bfe14b497c572c35f
Add a new function timer function to set up the timer, similar to what
we have in the Linux kernel. This patch also converts existing opencoded
timer setup in the libosmocore tree as initial client of this new
function.
This patch implicitly removes function callback passed by reference that
defeat compile time type validation.
Compile-tested only, but I ran make check that reports success when
testing timer infrastructure.
Change-Id: I2fa49972ecaab3748b25168b26d92034e9145666
* remove unused parameter from logging_vty_add_cmds()
* mark log level descriptors static
* change internal static function int check_log_to_target() to more
appropriate bool should_log_to_target()
* deprecate log_vty_command_*() from public API as it should only be
used by logging_vty_add_cmds()
Change-Id: I0e9ddd7ba3ce211302d99a3494eb408907a2916e
Related: OS#71
This change extends the convolutional code test coverage, adding
the GSM 05.03 specific test vectors, generated by the conv_gen.py.
Inspired by Tom's patch:
http://lists.osmocom.org/pipermail/openbsc/2014-April/007364.html
Change-Id: I76d1cd4032d2f74c5bb93bde4fab99aa655b7f1a
* data structure representing 3GPP TS 52.021 §9.4.62 SW Description
* function to serialize it into msgb
* function to deserialize it from buffer
* functions to extract/estimate buffer size for SW Description
* test harness (partially taken from OpenBSC)
There are several similar functions to deal with SW Description in
OpenBSC, there's also need to use similar functionality in
OsmoBTS. Hence it's better to put the code into common library with
proper tests and documentation.
Change-Id: Ib63b6b5e83b8914864fc7edd789f8958cdc993cd
Related: OS#1614
This allows programmatic access to introspection of FSM instances, which
is quite handy from e.g. external test cases: Send a message to the
code, then use the CTRL interface to check if that message has triggered
the right kind of state transition.
Change-Id: I0f80340ee9c61c88962fdd6764a6098a844d0d1e
Sometimes (particularly when testing), we may want to parse+execute an
arbitrary control command simply form a string buffer, rather than from
a msgb. Let's add a helper for that.
Change-Id: Iaca748e0d942bb2a1ee7c2776b37485e1439eb0c
Introduce two lookup helper functions to resolve a fsm_instance based on
the FSM and name or ID. Also, add related test cases.
Change-Id: I707f3ed2795c28a924e64adc612d378c21baa815
The old osmo_sock_init() function allows only either a bind (for a
server socket), or a connect (for a client socket), but not both
together. So there's no way to have a client socket that is bound to a
specific local IP and/or port, which is needed for some use cases.
Change-Id: Idab124bcca47872f55311a82d6818aed590965e6
The create function to generate the RESET ACKNOWLEDGE
message is not accessible from outside, as it does not
appear in limosmogsm.map. It also has not testcase.
This commit adds gsm0808_create_reset_ack() to the
map file and also adds a testcase.
Change-Id: I82d3411484f82b4a9205d407fa0442244678f183
gsm0808.h/c lacks functionality to generate BSS_MAP_MSG_ASSIGMENT_RQST messages.
These messages are required if the code is used in an MSC implementation.
This commit adds a gsm0808_create_assignment() function, that generates an
A/AoiP BSS_MAP_MSG_PAGING message.
Change-Id: I4d1d455a1e1cf95407e23ded7b7defbcf2dd6ff0
gsm0808.h/c lacks functionality to generate BSS_MAP_MSG_PAGING messages. These
messages are required if the code is used in an MSC implementation.
This commit adds a gsm0808_create_paging() function, that generates an A/AoiP
BSS_MAP_MSG_PAGING message.
Change-Id: I9afecf0109305ca5153bf081bb29cd94071dd2b7
gsm0808.h/c lacks functionality to generate CIPHER MODE COMMAND messages. These
messages are required if the code is used in an MSC implementation.
This commit adds a gsm0808_create_cipher() function, that generates an A/AoiP
CIPHER MODE COMMAND message.
Change-Id: I8eb1c357860c3e740b0f5d17e1c256bc87920958
The planned support for true A over IP requires the encoding of
the a Cell Identifier List element (see also BSS_MAP_MSG_PAGING).
This commt adds encoding/decoding functionality and tests for
the element mentioned above, however, it is not yet actively used.
Change-Id: I625245dd1dd396fc2bc189e8cd2c444a33042528
The planned support for true A over IP requires the encoding of
the an Encryption Information element (see also BSS_MAP_MSG_CIPHER_MODE_CMD).
This commt adds encoding/decoding functionality and tests for
the element mentioned above, however, it is not yet actively used.
Change-Id: I8262050a9d9fd3f17462cfbb046c6e034dccc6fb
The planned support for true A over IP requires the encoding of
the a Channel Type element (see also ASSIGNMENT REQUEST).
This commt adds encoding/decoding functionality and tests for
the element mentioned above, however, it is not yet actively used.
Change-Id: Id0e2164d84b8cbcc6fe6a090fc7f40a1251421d7
the classic A implementation in libosmocore lacks support for AoIP
message elements. This patch adds support for AoIP by adding a set
of new gsm0808_create_..., which support the missing AoIP message
elements
Change-Id: I77f866abec1822d19871052f3c647ad782785b34
The planned support for true A over IP requires the encoding and
decoding of a so called "Speech Codec Element" element.
This commt adds parsing functionality and tests for the element
mentioned above, however, it is not yet actively used.
Change-Id: I0e1e2edf47adaa45b22d4b0bcae3640dba7ca200
The planned support for true A over IP requires the encoding and
decoding of a so called "AoIP Transport Layer Address" element.
This commt adds parsing functionality and tests for the element
mentioned above, however, it is not yet actively used.
Change-Id: I57933b0a06a3f54ec2a41e6ecb6ced9fbbc89332
Don't use CTRL_TYPE_UNKNOWN as value_string[] terminator, use an explicit, more
obvious { 0, NULL } termination. Set an explicit string for CTRL_TYPE_UNKNOWN.
No other value_string[]s to date have such a "hidden" terminator.
BTW, a { 0, "string" } item is not a terminator, only { 0, NULL } is, so we can
set a string for CTRL_TYPE_UNKNOWN == 0.
Also, having a string value for CTRL_TYPE_UNKNOWN is not harmful because all
code paths explicitly check for the CTRL_TYPE_*s that are valid.
Adjust the test expectation.
From the ctrl_type_vals enum, remove the = 0, because it is implicitly 0
anyway.
One motivation to press this fixup: I am trying to add a script that checks
whether all value_string[]s are terminated to our jenkins jobs, and to find
that this one is terminated, it would need to interpret the CTRL_TYPE_UNKNOWN
constant, which would make things far more complex. At this point, all of the
value_string[]s have an explicit termination, and I would like to enforce this
from now on -- for readable code and to not spend more time on the validator.
The patch adding ctrl_type_vals (Icd4e96dd9f00876cb70b43cfcf42ab4f10311b28) was
accepted by another reviewer before I could reconfirm my -1, so this is a fixup
to enable the termination checking script patches.
Related: I2bc93ab4781487e7685cfb63091a489cd126b1a8 (adds script to libosmocore)
I7fe3678b524d602fc6aa14bc0ed06308df809a3e (uses in jenkins.sh)
Icd4e96dd9f00876cb70b43cfcf42ab4f10311b28 (adds ctrl_type_vals)
Change-Id: Ia99f37464c7b36b587da2cc78f52c82725f02cbc
In a comment and by code #if'd away, illustrate that the AUTS used in the unit
test is accurate.
Related: OS#1968
Change-Id: Iefeaaf33570f8e40245fdf9b810390ec61cfc7e0
After the legacy mode incrementing with ind_bitlen == 0 is through, do another
AUTS run with sensible ind_bitlen and ind, and then two more normal vector
generations to verify proper SQN increments.
Related: OS#1968
Change-Id: Id6947899ff7b1c82b939f969e163e51ce282bce2
So far we incremented SQN by 1, which doesn't match the procedures described in
3GPP TS 33.102. An IND (index) denotes a non-significant part of SQN, and the
significant SEQ part needs to be incremented.
In OsmoHLR we furthermore want to use the "exception" suggested in annex C.3.4,
so that each HLR's client has a fixed IND index. In other words, we will not
assign IND cyclically, but keep IND unchanged per auth vector consumer.
Add 'ind_bitlen' and 'ind' to the osmo_sub_auth_data.u.umts structure and
increment SQN accordingly.
Add a comment explaining the details.
Because 'ind_bitlen' is still passed as zero, the milenage_test does not change
its behavior, which is a feature I want to clearly show in this patch. The test
will be expanded for the newly implemented SQN scheme in a subsequent patch.
Adjust osmo-auc-gen.c to still show the right SQN and SQN.MS -- because it is
passing ind_bitlen == 0, osmo-auc-gen can rely on single increments and know
SQN.MS is sqn - 1. Note that osmo-auc-gen_test output remains unchanged.
Related: OS#1968
Change-Id: Ibc97e1736a797ffcbf8c1f7d41c5c4518f4e41bf
Prepare for the implementation of splitting SQN increments in SEQ and an IND
part; particularly to clearly show where the changes in auth/milenage_test's
expectations originate.
Rationale: the source of UMTS auth vectors, for us usually OsmoHLR, typically
stores the last used SQN, not the next one to be used. Particularly with the
upcoming fix of the SQN scheme, this change is important: the next SQN will
depend on which entity asks for it, because each auth consumer may have a
particular slot in the IND part of SQN. It does not make sense to store the
next SQN, because we will not know which consumer that will be for.
The milenage_test has always calculated a tuple for SQN == 34. To account for
the increment now happening before calculating a tuple, lower the test_aud->sqn
by one to 0x21 == 33, so that it is still calculating for SQN == 34.
Because we are no longer incrementing SQN after the tuple is generated,
milenage_test's expected output after doing an AUTS resync to 31 changes to the
next SQN = 32, the SQN used for the generated tuple.
(BTW, a subsequent patch will illustrate AUTS in detail.)
osmo-auc-gen now needs to pass the user requested SQN less one, because the SQN
will be incremented befor generating the auth vector. Also the SQN remains the
same after generating, so SQN output needs less decrementing. Note that the
expected output for osmo-auc-gen_test remains unchanged, hence the same input
arguments (particularly -s <sqn> and -A <auts>) still produce the same results.
Note: osmo-hlr regression tests will require adjustments when this patch is
merged, because it must now pass desired_sqn - 1 instead of just desired_sqn.
See osmo-hlr change-id I4ec5a578537acb1d9e1ebfe00a72417fc3ca5894 .
Related: OS#1968
Change-Id: Iadf43f21e0605e9e85f7e8026c40985f7ceff1a3
Upcoming patches will change the way SQN are incremented. Change the SQN
related output by osmo-auc-gen so that it also makes sense after these changes,
and so that its output is proven to remain unchanged for the same arguments:
Always show the SQN used for vector generation when a UMTS vector was generated.
Don't show the next SQN, it will not make sense anymore (see later patches).
The adjustments of expected output of osmo-auc-gen_test illustrates how the
output changes.
Related: OS#1968
Change-Id: I35d9c669002ff3e8570e07b444cca34ce57c3b0c
Add test for osmo-auc-gen invocations to ensure stability across upcoming SQN
increment scheme changes.
The test comprises of a shell script that invokes the osmo-auc-gen binary with
various milenage parameters, of which the stdout/stderr are verified.
More osmo-auc-gen invocations could be added, but my main focus is on the SEQ
changes. Instead of manually testing that it still works for each SQN patch, I
want this test to do it for me.
To make sure that osmo-auc-gen is build before the tests are launched, place
'utils' before 'tests' in the root Makefile.am.
Related: OS#1968
Change-Id: Ib4af34201cd2e7d76037bcd31dd89ef18c1a9aec
In the milenage_test, the console output printed "SEQ.MS = 33", but 33 is
a) the SQN, not SEQ;
b) the SQN *after* the next auth generation, i.e. SQN.MS would have been 31.
While at it also use the proper PRIu64 from inttypes.h to output the sqn value.
This prepares for upcoming sparation of SQN incrementing by SEQ and IND,
particularly to clearly show where the changes in auth/milenage_test's
expectations originate.
Related: OS#1968
Change-Id: Ie83201f1362f3d793ada774f3fc5f89cc0b3fbb7
There are some projects, such as GR-GSM and OsmocomBB, which would
benefit from using one shared implementation of GSM 05.03 code. So,
this commit introduces a new sub-library called libosmocoding, which
(for now) provides GSM, GPRS and EDGE transcoding routines, migrated
from OsmoBTS.
The original GSM 05.03 code from OsmoBTS was relicensed under
GPLv2-or-later with permission of copyright holders (Andreas Eversberg,
Alexander Chemeris and Tom Tsou).
The following data types are currently supported:
- xCCH
- PDTCH (CS 1-4 and MCS 1-9)
- TCH/FR
- TCH/HR
- TCH/AFS
- RCH/AHS
- RACH
- SCH
Change-Id: I0c3256b87686d878e4e716d12393cad5924fdfa1
To be able to add some more tests, related to convolutional coding,
without duplication of code, the test logic was separated from the
conv_test.c into conv.c and conv.h.
Change-Id: Idbdc7e19cb9b9a36cd1fccd621cd858e87530d98
Use value_string for enum ctrl_type instead of custom code. Add
corresponding unit tests.
Related: OS#1615
Change-Id: Icd4e96dd9f00876cb70b43cfcf42ab4f10311b28
Configure logging to be deterministic and add stderr checking to testuite.at.
However, exclude the thousands of message modification log lines from the log
to not have a huge test expectation file.
Change-Id: I0dd7112967a64a168556b62e5ec15107b7608ffb
This would have caught the wrong expectation of AUTS' length fixed recently
(3a5ca647c5).
Besides AUTS, add AUTN, RES, CK, IK which were also not tested yet.
Change-Id: I6fddf8d7ce97137b0a585d365807bcaf90a319d0
Related: OS#1593
This is particularly useful for hex dumps containing spaces found in a log
(e.g. osmo-nitb authentication rand token), which can now be passed in quotes
to osmo-auc-gen without having to edit the spaces away.
Change-Id: Ib7af07f674a2d26c8569acdee98835fb3e626c45
socket.c still uses fprintf to output error messages. This commit
replaces the fprintf with proper LOGP messages.
Change-Id: Ia2993415d5f5c33ccd719af239ff59252d11b764
Employ osmo_gettimeofday_override_* to take bssgp_fc_test off real time. The
jenkins build slave often failed the test based on sporadic time delays due to
server load and randomly rejected good patches. This patch ends that.
Change-Id: Ie5029b85c2a154554d75d7f9af49a3b93425fdd9
Related: OS#1809
GSUP transmits AUTS for UMTS authentication procedures, and OAP uses the same
procedures to authenticate. osmo-gen-vec is a utility program that passes AUTS
to our osmo_auth_gen_vec_auts() API.
According to 3GPP 33.102 6.3.3, AUTS = SQN^AK || MAC-S, which are 6 || 8 == 14
bytes. This is confirmed by 24.008 9.2.3a where the TLV has 16 bytes, TL = 2
and AUTS being the V = 14.
It is not harmful for milenage_gen_vec_auts() to pass two more AUTS bytes. But
writing 16 bytes to a GSUP struct is a potential problem when passing in a 14
byte long AUTS buffer to the GSUP API, which then reads past the AUTS buffer.
The API implies the length, so far to be 16, so passing in a 14 byte buffer to
GSUP would require copying to a larger buffer first.
Fix this by using a length of 14 for AUTS everywhere instead.
This constitues an ABI breakage, we may handle it as a "fix before an official
release", otherwise we need a version bump.
The OAP protocol document has also been updated, needs an update in the
osmo-gsm-manuals as well.
Change-Id: If25b173d9ec57ea4c504d860954912b7d82af455
The function pointer expects the last arg as int64_t, stats_test.c uses
an int instead. Fix the argument type as well as the printf format for it.
Fixes this compiler warning seen on our FreeBSD build slave:
CC stats/stats_test.o
../../tests/stats/stats_test.c:288:18: warning: incompatible pointer types assigning to 'int (*)(struct osmo_stats_reporter *, const struct osmo_stat_item_group *, const struct osmo_stat_item_desc *, int64_t)' from 'int (struct osmo_stats_reporter *, const struct osmo_stat_item_group *, const struct osmo_stat_item_desc *, int)' [-Wincompatible-pointer-types]
srep->send_item = stats_reporter_test_send_item;
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
Change-Id: I91cbfd4dd25a881b803943430101dabf07dafc7c
Function bitvec_rl_curbit added to get number of uninterrupted
bits run in vector starting from the current bit till max number
of bits.
Test case is added to check bitvec_rl_curbit.
Change-Id: Iae153d3639ea6b891c1fc10d7801a435c9492e26
fixes
lapd/lapd_test.c:54:2: runtime error: null pointer passed as argument 2, which is declared to never be null
Change-Id: I7030729f4f4c867adecc7afc15bb5ca9beff0030
Provide one central LOGPFSML to print FSM information, take the FSM logging
subsystem from the FSM instance but use an explicitly provided log level
instead of the FSM's default level.
Use to replace some, essentially, duplications of the LOGPFSM macro.
In effect, the fsm_test's expected error changes, since the previous code dup
for logging events used round braces to indicate the fi's state, while the
central macro uses curly braces.
Change-Id: If295fdabb3f31a0fd9490d1e0df57794c75ae547
In log_set_category_filter(), passing a negative index lead to memory
corruption. Particularly dangerous since the internal logging categories have
negative values.
Fix: apply map_subsys() to interpret negative values as internal logging
categories.
As a side effect, out-of-bounds logging categories will be mapped to DLGLOBAL
instead of being dropped.
Fix the expectations in logging_test to match the fixed bug.
While at it also guard against a NULL logging target.
Change-Id: Ib0725b22bc39498c6b3970a61eb3339cf56d19f1
Add a check to logging_test.c to show a bug: passing an internal DL* category
constant to log_set_category_filter() results in a negative array index and
undefined behavior. A sanitize build should catch this.
The bug is confirmed by the fact that logging_test.err stays the same
(hopefully) although a logging output should appear from this patch. The test
could as well segfault or anything else, it's a bit of a gamble.
This bug will be fixed along with the expectation in a subsequent patch.
Change-Id: Ie2da77c642a84cafc0f528985930697ec167183b
To check category bounds, rather use num_cat_user, to redirect all semantically
unknown categories to DLGLOBAL.
Adjust logging_test expectations accordingly: "(d)" is now also shown.
Note: subsys is and needs to be signed, while num_cat* are unsigned. Thus for a
negative subsys, 'subsys >= num_cat_user' practically always yields true. Pay
close attention to signedness and check upper bound only for positive values.
Change-Id: I4a952b759f30d90fbfb81fedcfc56a8092ea18c1
In the background osmo_log_info array, the user's logging categories are
enhanced by the library internal ones. So far logging category range checking
only checked for the larger array bounds, although passing a logging category
>= num_cat_user is already semantically unknown and should redirect to
DLGLOBAL.
Add a check to logging_test.c to show that this isn't happening. Instead of
DLGLOBAL, a logging category that happens to be at that index is queried.
The bug is confirmed by logging_test.err only showing "(e)" and not "(d)":
"(e)" is shown because the first category after the user ones happens to be
DLGLOBAL. "(d)" is omitted since it hits a category that's not on debug level.
This bug will be fixed along with the expectation in a subsequent patch.
Change-Id: I397278714018ee9a0ae5101515f31ddddf79c2ec
In map_subsys(), fix the '>' condition to '>=' for array bounds checking.
Also make the bounds checking more strict: after both invocations of
subsys_lib2index(), re-check validity of the array index. If the final index is
still wrong, which should never happen, exit by assertion.
Change-Id: I7ca1a1d47724e40350f1c4dfebe90bad01c965f9
Add a check to logging_test.c to show a bug: when a logging category value that
is the first out-of-bounds value is passed to the logging system, the internal
map_subsys() fails to redirect to DLGLOBAL due to a flawed conditional. This
results in a too large array index and undefined behavior. A sanitize build
should catch this.
The bug is confirmed by the fact that logging_test.err stays the same
(hopefully) although a logging output should appear from this patch. The test
could as well segfault or anything else, it's a bit of a gamble.
This bug will be fixed along with the expectation in a subsequent patch.
Change-Id: I12bf38b6c1f85e2d7bf5a15f942dfe0beed41eba
For out-of-bounds logging categories, redirect to the proper DLGLOBAL array
index instead of returning -1.
Adjust test expectation which shows that the bugs tested for are fixed.
Note: there are separate bounds checking problems, left for another patch.
Change-Id: I6ea9a59e005a22e0305454291714fdb9531c346b
Add a check to logging_test.c to show a bug: when a logging category value that
is out-of-bounds is passed to the logging system, the internal map_subsys()
function should remap that to DLGLOBAL. But in fact DLGLOBAL is -1 and the
function fails to map this to a proper positive array index, directly returning
-1 instead. This results in a negative array index and undefined behavior. A
sanitize build should catch this.
The bug is confirmed by the fact that logging_test.err stays the same
(hopefully) although a logging output should appear from this patch. The test
could as well segfault or anything else, it's a bit of a gamble.
This bug will be fixed along with the expectation in a subsequent patch.
Note: osmo_log_info->num_cat + 0 is also out-of-bounds, but there is a separate
bug there, so leaving this for another patch.
Change-Id: I161b6550fa204a872bad1abefee1a6155393fafd
Prepares for upcoming modifications of the logging test to show and fix bugs in
the logging system.
Change-Id: I9461b987adf85d87469a6af55de5f1aa478f6ebb
All DL* categories are typically negative, but DLGSUP isn't, and it's also not
in libosmocore's internal_cat array.
See: 3b6fb0880c
This means that a program using DLGSUP has to include DLGSUP in its own logging
cat array (typically not needed for DL* categories), which means for osmo-nitb
that DLGSUP (11) replaces DMGCP (also 11), and DMGCP becomes unusable.
Fix this: make DLGSUP -11 and include in internal_cat.
In gsup_test.c, no longer add DLGSUP to the logging categories array.
External follow-ups are otherwise needed only in osmo-hlr.git and some pending
patches for openbsc (Id3938267fa062e1a997d3704cd678874306f86ee).
Change-Id: Id974c7be158e4d60421a98110f5c807aefd31119
truncating the unsigned long pointer msg->data to 'int' and then passin
git into msgb_resize_area() is unsafe as depending on the 32rd address
bit it will be eiether negative or positive. That will in turn change
the expected "Sub area is not fully contained in the msg data\n" error
message into "Negative sizes are not allowed\n" which is not what the
autotest case expects.
Change-Id: I87ce13c265704d4ba8724e7dc7ed874c1128e0fa
The write queue was always meant to not queue more than the
max_length messages but the implementation never rejected a
message.
Begin to log and enforce the queue size limit, add a testcase
to verify the code and initialize except_cb as part of a fix
for that new test case.
Real applications might now run into the queue limit and drop
messages where they just queued them before. It is unfortunate
but I still think it is good to implement the routine as it was
intended. We need to review osmo_wqueue_enqueue once more to
see that no msgb is leaked.
Change-Id: I1e6aef30f3e73d4bcf2967bc49f0783aa65395ae
Numerous issues caused sim_test to be attempted even though libosmosim was not
built:
In configure.ac, the ENABLE_PCSC variable lacked an AC_SUBST() to be exported.
Furthermore in configure.ac, no value 'yes'/'no' was assigned to the
ENABLE_PCSC variable, only to the enable_pcsc value.
In testsuite.at, encapsulating the sim_test in 'if ENABLE_PCSC' seems to have
no effect, regardless (not even when using a variable that should be defined
accurately).
So fix with these steps, similarly to how we do it in openbsc:
In AC_ARG_ENABLE, directly use 'ENABLE_PCSC' to assign 'yes'/'no'.
Export the same using AC_SUBST().
Add tests/atlocal.in to translate ENABLE_PCSC to enable_sim_test (also add
atlocal to AC_OUTPUT and distclean).
Use enable_sim_test in testuite.at, as seen in openbsc: use AT_CHECK() to
indicate skipping the test if enable_sim_test isn't 'yes'.
Change-Id: I9e8740c7d2dfbd272e22fee85972ef3fda7184a8
As outlined by mail on the 13th of July the tree based approach to
decoding in the PCU is faster by order of magnitude. Instead of having a
slow implementation in the library and a quick one in the PCU, let's
only have a quick one in the PCU and at some point in the future move it
to libosmocore.
Execute the plan and remove t4_decode.
Change-Id: I021424444625a097560d086c217c81eac4a5ee44
osmo_fsm_inst_alloc() logs allocation but osmo_fsm_inst_free() is
silent. Fix this by adding log message for deallocation to make FSM
lifecycle tracking easier. Also make sure it's covered by test suite.
Change-Id: I7e5b55a1fff8e36cf61c7fb61d3e79c1f00e29d2
Check that RTP payload we're about to decode is not NULL and return
proper error code instead of segfaulting. Add corresponding test case.
Change-Id: Ib6cda9900a41ed16bbfbde9df3de9d38e0a7469b
Previously function was defined but not exposed so there were a way to
register FSM but no way to unregister it.
Change-Id: I2e749d896009784b77d6d5952fcc38e1c131db2b
The osmo_hexdump of the output in sh_chk() omitted the last byte of the
returned bytes from the osmo_nibble_shift_*() functions.
Determine the number of bytes from nibbles divided by two plus one for any odd
nibble number. Output this number of bytes of output data.
Memset the output buffer to get well-defined bytes for unwritten places.
Also assert that we have enough buffer length for all nibbles.
Change-Id: I011f42bca555caec0dfe8688ff1f28303fa04fad
Previously while testing osmo_nibble_shift_left_unal() following error was
triggered by AddressSanitizer upon offs == 12 and the last sh_chk line, i.e.
shift left of 12 nibbles from in2:
==3890== ERROR: AddressSanitizer: stack-buffer-overflow on address 0xbff5b5b6 at pc 0xb6186862 bp 0xbff5b4a8 sp 0xbff5b49c
READ of size 1 at 0xbff5b5b6 thread T0
#0 0xb6186861 (/home/msuraev/source/gsm/libosmocore/src/.libs/libosmocore.so.7.0.0+0xc861)
#1 0x8049d8b (/home/msuraev/source/gsm/libosmocore/tests/bits/.libs/lt-bitrev_test+0x8049d8b)
#2 0x804a9d1 (/home/msuraev/source/gsm/libosmocore/tests/bits/.libs/lt-bitrev_test+0x804a9d1)
#3 0xb5fe3af2 (/lib/i386-linux-gnu/libc-2.19.so+0x19af2)
#4 0x8048a30 (/home/msuraev/source/gsm/libosmocore/tests/bits/.libs/lt-bitrev_test+0x8048a30)
Address 0xbff5b5b6 is located at offset 38 in frame <main> of T0's stack:
This frame has 3 object(s):
[32, 38) 'in2'
[96, 104) 'out'
[160, 168) 'in1'
The reason is incorrect range in test cycle. Fix it and adjust test
output accordingly.
Tweaked-by: Neels Hofmeyr <nhofmeyr@sysmocom.de>
Fixes: OW#1589 ("undefined behavior in libosmocore triggered by tests")
Change-Id: I5eb3f600290c05b4ab9ac2450a28d616e6b415fd
Use osmo_gettimeofday_override* to decouple the timer test from real time. No
longer call osmo_select_main(), since select() actually waits for real time.
This reduces the timer_test to the osmo_timer_* logic and excludes the real
time and osmo_timers_nearest() accuracy testing with actual waiting involved.
This may be seen as a loss, but is more fit for a test suite.
The main point here is to get deterministic results in jenkins, so that we
don't have to retrigger jobs based on timing failures; added bonus is that the
test runs much faster now.
Change-Id: Ic5649512df86dd17070daa2f314159eafaf8feb8
When a timer was late, show the timing details.
Also count whether timers fired early, for completeness' sake.
Change-Id: Id3942637d77a28b5092ffffcc3e6d9d67c2b8e68
The timer_test schedules timers and records the desired stop time. Also store
the usec value of the desired stop time, because scheduling at e.g. sec N usec
999999 but recording sec N usec 0, and then receiving a timer at sec N+1 usec 0
is only 1 usec late, but records as 1000000 usecs late. This might have been
the main cause of the timer test not working well on the osmocom build server.
Change-Id: I13bb60f7d341a397f95d13d9c63c40188b6cd5a0
Add src/gsm/libosmogsm.la explicitly to some test linkages, because otherwise
the linker would pick the libosmogsm already installed on the system instead of
the one that was just built in the source tree.
I noticed because a libosmogsm needing some more symbols from libosmocodec was
still installed, while the patch that cause it was already removed. Thus I
caught all(?) test binaries that linked libosmogsm from $PREFIX.
Change-Id: Ie61d60e1506f16de20add70fd0f44ebfa7a00a75
Keith of Rhizomatica has an issue of a unrejected interrogateSS.
Start with just decoding the message and printing the empty test
and the code.
What is kind of missing is the classification between invoke,
returnResult and returnResultLast that we need to add in the
long run.
Change-Id: Iadfa156707a96f2a34f3948c7cc9a74435f17114
Corresponding test code include both official test vectors from the
specs and data from over-the-air tests.
This obsoletes libosmo-crypt-a53 as it was last missing piece
unimplemented in libosmogsm.
Change-Id: I939e4f6b91b4a7c591ef3761fe2d46ed1c2fb2d3
Related: OS#1582
Check if library actually support Milenage, COMP128 v2 and v3 algorithms
instead of just printing enum values or nothing.
Change-Id: I2b98481f56a8381058d4b29db5e8a36eb193eee9
The actual code is from OsmoBTS' tch.c by Harald Welte. Add unit tests,
doxygen annotation and extra memory safety check. Those functions are
used in several BTS implementations but seems generic enough to be
generally useful.
Change-Id: I2b1901c4161e8035f059585901dca593b661556d
This code is supposed to formalize some of the state machine handling in
Osmocom code.
Change-Id: I0b0965a912598c1f6b84042a99fea9d522642466
Reviewed-on: https://gerrit.osmocom.org/163
Tested-by: Jenkins Builder
Reviewed-by: Harald Welte <laforge@gnumonks.org>
Add functions which check if given FR or HR frame (packed in RTP)
contains SID (SIlence Descriptor) and corresponding tests.
Related: OS#22
Change-Id: I4051e3c0d4fb9ee93d7e9e0ef4abaf9f18e227ca
Reviewed-on: https://gerrit.osmocom.org/160
Tested-by: Jenkins Builder
Reviewed-by: Harald Welte <laforge@gnumonks.org>
* add functions to encode/decode various codec paramters from RTP payload with
AMR frame according to RFC 4867
* those functions are extended version based on code from osmo-bts'
amr.c by Andreas Eversberg
* add corresponding enum types and strings for logging
* add regression tests
It's useful both to replace manual parsing in osmo-bts with fuctions
covered by test suite and as a debugging helpers for issues related to
AMR.
Change-Id: Ia217679a07d3fbc970f435e20f6eac33d34bd597
Related: OS#1562
Reviewed-on: https://gerrit.osmocom.org/118
Tested-by: Jenkins Builder
Reviewed-by: Holger Freyther <holger@freyther.de>
Move those routines from OpenBSC to libosmogsm, so they can be
re-used from other programs. I think it was a mistake to add them only
inside the openbsc repository in the first place. We need to pay more
attention to this in the future.
Add python utility to generate .c code with convolutional
encoder/decoder based on polynomial description of the code. If argument
given it'll be interpreted as intended output directory, otherwise
current working directory is used.
Codes for *CCH, CS2/3 and TCH/AFS are generated. Corresponding manual
implementations are removed from tests. This introduce build-time
dependency on python.
The main work for this patch was generously contributed by Sylvain
Munaut.
Fixes: OS#1629
Harald Welte
Neels Hofmeyr
Oliver Smith
Philipp Maier
Neels Hofmeyr
Pau Espin
Daniel Willmann
