gsm0808.h/c lacks functionality to generate CIPHER MODE COMMAND messages. These
messages are required if the code is used in an MSC implementation.
This commit adds a gsm0808_create_cipher() function, that generates an A/AoiP
CIPHER MODE COMMAND message.
Change-Id: I8eb1c357860c3e740b0f5d17e1c256bc87920958
The planned support for true A over IP requires the encoding of
the a Cell Identifier List element (see also BSS_MAP_MSG_PAGING).
This commt adds encoding/decoding functionality and tests for
the element mentioned above, however, it is not yet actively used.
Change-Id: I625245dd1dd396fc2bc189e8cd2c444a33042528
The planned support for true A over IP requires the encoding of
the an Encryption Information element (see also BSS_MAP_MSG_CIPHER_MODE_CMD).
This commt adds encoding/decoding functionality and tests for
the element mentioned above, however, it is not yet actively used.
Change-Id: I8262050a9d9fd3f17462cfbb046c6e034dccc6fb
The planned support for true A over IP requires the encoding of
the a Channel Type element (see also ASSIGNMENT REQUEST).
This commt adds encoding/decoding functionality and tests for
the element mentioned above, however, it is not yet actively used.
Change-Id: Id0e2164d84b8cbcc6fe6a090fc7f40a1251421d7
the classic A implementation in libosmocore lacks support for AoIP
message elements. This patch adds support for AoIP by adding a set
of new gsm0808_create_..., which support the missing AoIP message
elements
Change-Id: I77f866abec1822d19871052f3c647ad782785b34
The planned support for true A over IP requires the encoding and
decoding of a so called "Speech Codec Element" element.
This commt adds parsing functionality and tests for the element
mentioned above, however, it is not yet actively used.
Change-Id: I0e1e2edf47adaa45b22d4b0bcae3640dba7ca200
The planned support for true A over IP requires the encoding and
decoding of a so called "AoIP Transport Layer Address" element.
This commt adds parsing functionality and tests for the element
mentioned above, however, it is not yet actively used.
Change-Id: I57933b0a06a3f54ec2a41e6ecb6ced9fbbc89332
Instead of returning maxfd, which is the highest fd ever seen, take
the highest we have seen on this iteration.
This makes a tiny difference for the osmo-sip-connector and its
event loop integration. select.c ignores the return value of this
function right now.
This was seen while debugging the eventloop integration of the
osmo-sip-connector before and after a VTY connection. The fds
being polled didn't go down.
Change-Id: I1a6d7271273ec08bb511c21b936891bc508843e4
In Change-Id I61f452208088dc7097165deecef7c058ebb4bd4e we introduced
the #defines but didn't introduce the new log_info_cat information.
Change-Id: I218aa4cb1fc7640a75663be29bac672dfa8770f5
To make sure that new patches don't break a build done in another dir than
srcdir, make jenkins verify that it still works.
Even though 'make distcheck' also tests a build from a separate dir, this does
not verify that BUILT_SOURCES are generated properly. If these already exist in
the source tree from a previous 'make' issued in the source tree, the
BUILT_SOURCES are not regenerated during 'make distcheck'. Hence a separate
test run is necessary to ensure stability of new patches.
Change-Id: I4b31538c155941fd241bcd33b0d39f2f8491ac1e
The state check in lapd_dl_reset causes some buffers
never to be released. Using talloc report LAPD UA
message buffers are never released after each call
and cause a memory leak.
Change-Id: I2799b70623f2ec4dbc725eb213e332e98da02a3e
Expand 3GPP TS 52.021 §9.4.43 Probable Cause with Osmocom-specific value
for PCU version reporting to enable sending it via OML alarms.
Change-Id: If57459c0610f2c7b36d599b13087c8deef8bdd9e
Related: OS#1614
Ensure that a changed conv_gen.py and/or conv_codes_gsm.py result in
regeneration of the gsm0503* generated sources. Before this patch, manual
cleaning of the generated files was necessary to benefit from a code update.
Change-Id: Ib4328662c21280c0ea6aa9391a64ada2c6598704
Previously, this would fail when generating to $builddir if that subtree did
not exist yet in $builddir.
Change-Id: Ia4fba96dcf74a25cf3e515eb3e4f970e0c3cdd54
To ensure that a separate build dir keeps the source dir clean of state,
generate the gsm0503.h to the builddir instead of the srcdir. Adjustments for
everyone to access the right paths were added in previous patches.
Change-Id: Ia773ef5893a2018feb416061aefcf51835df18d2
To allow building coding/gsm0503_interleaving.c which includes the generated
bit*gen.h (via bits.h), add -I to the builddir include path in order to find
the generated bit*gen.h headers there.
Change-Id: I0d465bc109765b1315d615243bea6af027afa368
osmo-auc-gen on 32bit systems allowed only --sqn up to 32bits width. However,
the recently added regression test for osmo-auc-gen includes an ivocation with
a 48bit wide --sqn, which now causes the builds to fail on 32bit systems.
Fix the --sqn argument parsing for larger integers by using strtoull(). Do away
with the intermediate variable 'ul' and place the value directly in the auth
data struct.
Change-Id: Ifb73b3b3de06576e36076ca573d52327f90a1f77
The logging code crashes if osmo_log_info is not set, which is typically
achieved by calling log_init(). Let's fail with a reasonable assert
and error message if the user forgets that.
Change-Id: If3007860d2efe6ea9aec27e7d7439d44a7cd19c2
Let's add some general information about this repository, links to
redmine, gerrit, the mailing list, etc.
Change-Id: If034c6f551ff9bfaff0b8368fd0963f3147155b9
Composing the message type string requires knowing the protocol discriminator.
To ease printing the message type, add this function to switch between the
defined value_string[]s depending on pdisc.
Also publish the message type value_string[]s -- without inline functions to
access them because it is anyway more convenient to use
gsm48_pdisc_msgtype_name() instead.
Since gsm48_pdisc_msgtype_name() is nontrivial, do not add as inline function
-- in case the message type is not known, it needs a static string buffer.
Change-Id: I0fca8e95ed5c2148b1a7440eff3fc9c7583898df
I often want to log the protocol discriminator in the openbsc debug log. It's
more useful to get the name directly instead of looking it up every time.
Change-Id: I0f053e2a4360b27ffccda7cf82469fb1b1cbb3ae
Unterminated value_string arrays are dangerous since get_value_string() and
get_string_value() need to know where the struct ends. If the terminator is
missing, they might run through and return arbitrary memory locations.
Employ some regexes to find such unterminated value string arrays and return
nonzero if any are found.
This can be used in our jenkins build jobs to avoid committing unterminated
value_string arrays. In fact I've found one in current libosmocore:
gsm0808_bssap_names in gsm/gsm0808.c, fixed in a separate patch.
Change-Id: I2bc93ab4781487e7685cfb63091a489cd126b1a8
To ensure that the IND index appended to SEQ does not affect the SEQ, the check
should read '>= seq_1', not '>'.
Change-Id: Ib1251159eee02aa07fae1b429ffec2e4604bf6a8
To be able to use OSMO_VALUE_STRING() on a #defined constant, don't use
OSMO_STRINGIFY(): the second indirection resolves the #define to its value, so
for example
OSMO_VALUE_STRING(GSM48_PDISC_MM)
would resolve to
{ 0x05, "0x05" }
When using '#x' directly, this becomes the desired
{ 0x05, "GSM48_PDISC_MM" }
With enum values as we've used until now, this problem does not appear, because
enum values are not resolved by the preprocessor.
Keep OSMO_STRINGIFY() because it is used directly in openbsc (composing FSM
state names).
Change-Id: I91ecfcef61be8cf73d59ea821cc4fd9d2ad5c9c7
Don't use CTRL_TYPE_UNKNOWN as value_string[] terminator, use an explicit, more
obvious { 0, NULL } termination. Set an explicit string for CTRL_TYPE_UNKNOWN.
No other value_string[]s to date have such a "hidden" terminator.
BTW, a { 0, "string" } item is not a terminator, only { 0, NULL } is, so we can
set a string for CTRL_TYPE_UNKNOWN == 0.
Also, having a string value for CTRL_TYPE_UNKNOWN is not harmful because all
code paths explicitly check for the CTRL_TYPE_*s that are valid.
Adjust the test expectation.
From the ctrl_type_vals enum, remove the = 0, because it is implicitly 0
anyway.
One motivation to press this fixup: I am trying to add a script that checks
whether all value_string[]s are terminated to our jenkins jobs, and to find
that this one is terminated, it would need to interpret the CTRL_TYPE_UNKNOWN
constant, which would make things far more complex. At this point, all of the
value_string[]s have an explicit termination, and I would like to enforce this
from now on -- for readable code and to not spend more time on the validator.
The patch adding ctrl_type_vals (Icd4e96dd9f00876cb70b43cfcf42ab4f10311b28) was
accepted by another reviewer before I could reconfirm my -1, so this is a fixup
to enable the termination checking script patches.
Related: I2bc93ab4781487e7685cfb63091a489cd126b1a8 (adds script to libosmocore)
I7fe3678b524d602fc6aa14bc0ed06308df809a3e (uses in jenkins.sh)
Icd4e96dd9f00876cb70b43cfcf42ab4f10311b28 (adds ctrl_type_vals)
Change-Id: Ia99f37464c7b36b587da2cc78f52c82725f02cbc
In a comment and by code #if'd away, illustrate that the AUTS used in the unit
test is accurate.
Related: OS#1968
Change-Id: Iefeaaf33570f8e40245fdf9b810390ec61cfc7e0
In case we are a daemon, we do not need to daemonize again.
On the other hand everything is fine and we also do not need
to bail out with an error.
The daemonize template at [1] does the same.
[1] http://www.itp.uzh.ch/~dpotter/howto/daemonize
Change-Id: Ia4dcf7344bd65934faa3d7d46563f6e0532c232e
Copy list_first_entry, list_first_entry_or_null and list_last_entry from
current linux kernel's tools/include/linux/list.h and rename to llist_*.
Slightly adjust API doc but stay as close to the source as possible.
This can replace similar implementations in osmo-bts-octphy's l1_if.c,
in openbsc's gtphub.c and in osmo-hlr's gsup_server.c.
Change-Id: I4eac5be0c0b2cede04464c4c3a0873102d952453
After the legacy mode incrementing with ind_bitlen == 0 is through, do another
AUTS run with sensible ind_bitlen and ind, and then two more normal vector
generations to verify proper SQN increments.
Related: OS#1968
Change-Id: Id6947899ff7b1c82b939f969e163e51ce282bce2
So far we incremented SQN by 1, which doesn't match the procedures described in
3GPP TS 33.102. An IND (index) denotes a non-significant part of SQN, and the
significant SEQ part needs to be incremented.
In OsmoHLR we furthermore want to use the "exception" suggested in annex C.3.4,
so that each HLR's client has a fixed IND index. In other words, we will not
assign IND cyclically, but keep IND unchanged per auth vector consumer.
Add 'ind_bitlen' and 'ind' to the osmo_sub_auth_data.u.umts structure and
increment SQN accordingly.
Add a comment explaining the details.
Because 'ind_bitlen' is still passed as zero, the milenage_test does not change
its behavior, which is a feature I want to clearly show in this patch. The test
will be expanded for the newly implemented SQN scheme in a subsequent patch.
Adjust osmo-auc-gen.c to still show the right SQN and SQN.MS -- because it is
passing ind_bitlen == 0, osmo-auc-gen can rely on single increments and know
SQN.MS is sqn - 1. Note that osmo-auc-gen_test output remains unchanged.
Related: OS#1968
Change-Id: Ibc97e1736a797ffcbf8c1f7d41c5c4518f4e41bf
Prepare for the implementation of splitting SQN increments in SEQ and an IND
part; particularly to clearly show where the changes in auth/milenage_test's
expectations originate.
Rationale: the source of UMTS auth vectors, for us usually OsmoHLR, typically
stores the last used SQN, not the next one to be used. Particularly with the
upcoming fix of the SQN scheme, this change is important: the next SQN will
depend on which entity asks for it, because each auth consumer may have a
particular slot in the IND part of SQN. It does not make sense to store the
next SQN, because we will not know which consumer that will be for.
The milenage_test has always calculated a tuple for SQN == 34. To account for
the increment now happening before calculating a tuple, lower the test_aud->sqn
by one to 0x21 == 33, so that it is still calculating for SQN == 34.
Because we are no longer incrementing SQN after the tuple is generated,
milenage_test's expected output after doing an AUTS resync to 31 changes to the
next SQN = 32, the SQN used for the generated tuple.
(BTW, a subsequent patch will illustrate AUTS in detail.)
osmo-auc-gen now needs to pass the user requested SQN less one, because the SQN
will be incremented befor generating the auth vector. Also the SQN remains the
same after generating, so SQN output needs less decrementing. Note that the
expected output for osmo-auc-gen_test remains unchanged, hence the same input
arguments (particularly -s <sqn> and -A <auts>) still produce the same results.
Note: osmo-hlr regression tests will require adjustments when this patch is
merged, because it must now pass desired_sqn - 1 instead of just desired_sqn.
See osmo-hlr change-id I4ec5a578537acb1d9e1ebfe00a72417fc3ca5894 .
Related: OS#1968
Change-Id: Iadf43f21e0605e9e85f7e8026c40985f7ceff1a3
Upcoming patches will change the way SQN are incremented. Change the SQN
related output by osmo-auc-gen so that it also makes sense after these changes,
and so that its output is proven to remain unchanged for the same arguments:
Always show the SQN used for vector generation when a UMTS vector was generated.
Don't show the next SQN, it will not make sense anymore (see later patches).
The adjustments of expected output of osmo-auc-gen_test illustrates how the
output changes.
Related: OS#1968
Change-Id: I35d9c669002ff3e8570e07b444cca34ce57c3b0c
Add test for osmo-auc-gen invocations to ensure stability across upcoming SQN
increment scheme changes.
The test comprises of a shell script that invokes the osmo-auc-gen binary with
various milenage parameters, of which the stdout/stderr are verified.
More osmo-auc-gen invocations could be added, but my main focus is on the SEQ
changes. Instead of manually testing that it still works for each SQN patch, I
want this test to do it for me.
To make sure that osmo-auc-gen is build before the tests are launched, place
'utils' before 'tests' in the root Makefile.am.
Related: OS#1968
Change-Id: Ib4af34201cd2e7d76037bcd31dd89ef18c1a9aec
In the milenage_test, the console output printed "SEQ.MS = 33", but 33 is
a) the SQN, not SEQ;
b) the SQN *after* the next auth generation, i.e. SQN.MS would have been 31.
While at it also use the proper PRIu64 from inttypes.h to output the sqn value.
This prepares for upcoming sparation of SQN incrementing by SEQ and IND,
particularly to clearly show where the changes in auth/milenage_test's
expectations originate.
Related: OS#1968
Change-Id: Ie83201f1362f3d793ada774f3fc5f89cc0b3fbb7
We don't really use state numbers without bounds check into string
tables since March 2010, when value_string became part of libosmocore.
It's time to catch up, 7 years later...
Change-Id: I1dac7b4cb441a1119cc167112521e8b8aae62e63
We don't document the header files that define structs/enums/types
that are taken 1:1 from the relevant GSM specifications. So let's avoid
having doxygen generate tons of warnings for related undocumented
members.
Change-Id: I231f78972a015902e4085aa80fcbc04009ae9f13
The previous version of this commit got reverted to avoid a breakage in openbsc.
The problem is openbsc use an array of chreq_type with a manual defined size. This array
is using enums as index which breaks if any elements got added into the
middle, because the size of the array can't hold elements greater or
equal than the size.
Change-Id: I6676105507fe4e5627f740dfe4c2770f766ad068
dpkg-buildpackage fails due to missing file descriptions - add necessary
.install and .doc-base files to fix it.
Change-Id: I5fb7e813c0860a3b5037e805deb84f9bf649ffa3
There are some projects, such as GR-GSM and OsmocomBB, which would
benefit from using one shared implementation of GSM 05.03 code. So,
this commit introduces a new sub-library called libosmocoding, which
(for now) provides GSM, GPRS and EDGE transcoding routines, migrated
from OsmoBTS.
The original GSM 05.03 code from OsmoBTS was relicensed under
GPLv2-or-later with permission of copyright holders (Andreas Eversberg,
Alexander Chemeris and Tom Tsou).
The following data types are currently supported:
- xCCH
- PDTCH (CS 1-4 and MCS 1-9)
- TCH/FR
- TCH/HR
- TCH/AFS
- RCH/AHS
- RACH
- SCH
Change-Id: I0c3256b87686d878e4e716d12393cad5924fdfa1
To be able to add some more tests, related to convolutional coding,
without duplication of code, the test logic was separated from the
conv_test.c into conv.c and conv.h.
Change-Id: Idbdc7e19cb9b9a36cd1fccd621cd858e87530d98
Since we have automatic header generation, implemented in the
utils/conv_gen.py, it's time to use this feature!
Change-Id: I21caa4e433b2cc1861611e35350a9671da444c2a
Philipp Maier
Harald Welte
Holger Hans Peter Freyther
Neels Hofmeyr