Remove initial msgb talloc context creation: if we create a root ctx for msgb
that all msgb are allocated in, we would in a final cleanup discard all msgbs,
i.e. we would not verify that all msgb are cleaned up properly.
If we create the msgb context and *don't* clean it up in the end, the sanitizer
build fails because the context root is not cleaned up.
Easiest is to actually allocate all msgb at NULL ctx, because then any msgb
that aren't cleaned up properly would still linger, while we don't leave a root
ctx that we need to clean up either.
Helps fix sanitizer build on debian 9.
Change-Id: I1f2d1d05c75bbf4d92787f9735083f18cdc90f6f
The testsuite fails on some specific build machines in the OBS
build cluster. Let's try to figure out which CPU flags they have
to narrow down the cause of this.
Change-Id: Ib23e5bfb3c894206fad62d6cc6151583b1bb75a6
Let's fix some erroneous/accidential references to wrong license,
update copyright information where applicable and introduce a
SPDX-License-Identifier to all files.
Change-Id: I39af26c6aaaf5c926966391f6565fc5936be21af
According to
https://www.gnu.org/software/automake/manual/automake.html#Libtool-Flags
the libraries supposed to be added to *_LDADD or *_LIBADD
while *_LDFLAGS should contain additional libtool linking
flags. Previously we used both. Let's unify this and move all the
libraries into proper automake variable. While at it - also add
libosmocore.la for tests to LDADD since all the tests link against it
anyway.
Change-Id: Ia657a66db75df831421af5df1175a992da5ba80f
Sounds stupid, but we actually didn't support hex nibbles in one of
the two directions of the conversion, so let's make sure we test for
this.
Change-Id: I8445da54cc4f9b1cd64f286c2b238f4f7c87accb
In Change-Id Ifc6ac824f5dae9a848bb4a5d067c64a69eb40b56 we introduce
name mangling to replace any '.' in counter (group) names to be
converted to ':'. Let's test for this functionality explicitly as part
of the stats_test.
Change-Id: Ie35682aa79526e2ffeab6995cd640b7847d855bf
The rate_ctr.c code would do this mangling automatically, but let's
avoid using this from new versions of our code for
simplicity/explicitness.
Change-Id: I24a556f447cfac25efb6e83cac2d0c2972d98fe3
As rate counters are automatically exposed on the CTRL interface,
we need to make sure they don't contain special characters such as '.'
which are not permitted/supported by CTRL.
In order to be able to run old versions of osmocom programs with
libosmocore versions after this commit, we introduce some special
name mangling: Any '.' in the names are replaced with ':' during
counter group registration, if valid identifiers can be obtained
this way.
Change-Id: Ifc6ac824f5dae9a848bb4a5d067c64a69eb40b56
* introduce defines with NS state names
* use them for vty and tests
* expand test output to print complete NS state
Change-Id: I69f8d536135ae76dbca623c2f1ffba625adcb1e9
Related: SYS#3610
This function is actively used by OsmoPCU but have not been covered by
tests so far. The test code is based on
Minh-Quang Nguyen <minh-quang.nguyen@nutaq.com> submission with some
modifications.
The test's FIXME will be addressed in follow-up patches.
Change-Id: I2ee544256b8675bc62a42493aab66a8eeee54f90
Related: OS#1526
In ASCII string based protocols it a printf() version that prints
directly to the message buffer may be useful.
Add function msgb_printf(), make sure that msg buffer bounderies
are not exceeded. If the end of the tail buffer is hit, return
with an error code.
Change-Id: I15e1af68616309555d0ed9ac5da027c9833d42e3
Previously it would crash on NULL input. Let's handle it gracefully
instead. Corresponding test case is also added.
Change-Id: I587153e49d1c92128fac3ae5c124adba9592378e
No callers that would pass NULL exist, but let's check against NULL from the
start.
Fixup for recent change I1e94f5b0717b947d2a7a7d36bacdf04a75cb3522.
Change-Id: I111fbf29228929f2cd6ffa06bcb1f69da223224e
Add GSM23003_IMSI_MIN_DIGITS definition.
Add regression test gsm23003_test.c to test the two new functions.
Will be used by OsmoHLR to validate VTY and CTRL input.
Change-Id: I1e94f5b0717b947d2a7a7d36bacdf04a75cb3522
This uncovers some interesting behavior of the CTRL interface which we may want
to guard against in subsequent patches: trailing whitespace, ignored tokens,
special characters as cmd->id.
Change-Id: If7af06d50ca71fd528b08cd70310774d5a53f0f7
In many callers of the VTY API, we are lacking the vty_install_default() step
at certain node levels. This creates nodes that lack the 'exit' command, and
hence the only way to exit such a node is to restart the telnet session.
Historically, the VTY looked for missing commands on the immediate parent node,
and hence possibly found the parent's 'exit' command when the local node was
missing it. That is why we so far did not notice the missing default commands.
Furthermore, some callers call install_default() instead of
vty_install_default(). Only vty_install_default() also includes the 'exit' and
'end' commands. There is no reason why there are two sets of default commands.
To end this confusion, to catch all missing 'exit' commands and to prevent this
from re-appearing in the future, simply *always* install all default commands
implicitly when calling install_node().
In cmd_init(), there are some top-level nodes that apparently do not want the
default commands installed. Keep those the way they are, by changing the
invocation to new install_node_bare() ({VIEW,AUTH,AUTH_ENABLE}_NODE).
Make both install_default() and vty_install_default() no-ops so that users of
the API may still call them without harm. Do not yet deprecate yet, which
follows in Icf5d83f641e838cebcccc635a043e94ba352abff.
Drop all invocations to these two functions found in libosmocore.
Change-Id: I5021c64a787b63314e0f2f1cba0b8fc7bff4f09b
In vty_test, add three levels of parent nodes (level1, level2, level3) with
each having a leaf child (child1, child2, child3).
Use these to enhance the vty_test cfg files and test more diverse situations.
The current VTY code expects a go_parent_cb() to be present, otherwise it will
bump right back to the CONFIG_NODE, which will not work with more than one node
level below the CONFIG_NODE. Hence provide a minimal go_parent_cb().
Change-Id: Ib9bcf58b655fbd85e196f363fb7d8305d7dfc997
The recent exit-by-indent patch breaks a VTY case where a node is entered but
directly followed by a sibling or ancestor without listing any child nodes.
Regression introduced by I24cbb3f6de111f2d31110c3c484c066f1153aac9.
An example is a common usage in osmo-bts, where 'phy N' / 'instance N' is a
parent node that is commonly left empty:
phy 0
instance 0
bts 0
band 1800
Before this patch, this case produces the error:
There is no such command.
Error occurred during reading the below line:
bts 0
Fix indentation parsing logic in command.c to accomodate this case.
Add a unit test for empty parent node.
Change-Id: Ia0880a17ae55accb092ae8585cc3a1bec9986891
Note: This will break users' config files if they do not use consistent
indenting. (see below for a definition of "consistent".)
When reading VTY commands from a file, use indenting as means to implicitly
exit child nodes. Do not look for commands in the parent node implicitly.
The VTY so far implies 'exit' commands if a VTY line cannot be parsed on the
current node, but succeeds on the parent node. That is the mechanism by which
our VTY config files do not need 'exit' at the end of each child node.
We've hit problems with this in the following scenarios, which will show
improved user experience after this patch:
*) When both a parent and its child node have commands with identical names:
cs7 instace 0
point-code 1.2.3
sccp-address osmo-msc
point-code 0.0.1
If I put the parent's command below the child, it is still interpreted in the
context of the child node:
cs7 instace 0
sccp-address osmo-msc
point-code 0.0.1
point-code 1.2.3
Though the indenting lets me assume I am setting the cs7 instance's global PC
to 1.2.3, I'm actually overwriting osmo-msc's PC with 1.2.3 and discarding the
0.0.1.
*) When a software change moves a VTY command from a child to a parent. Say
'timezone' moved from 'bts' to 'network' level:
network
timezone 1 2
Say a user still has an old config file with 'timezone' on the child level:
network
bts 0
timezone 1 2
trx 0
The user would expect an error message that 'timezone' is invalid on the 'bts'
level. Instead, the VTY finds the parent node's 'timezone', steps out of 'bts'
to the 'network' level, and instead says that the 'trx' command does not exist.
Format:
Consistent means that two adjacent indenting lines have the exact
same indenting characters for the common length:
Weird mix if you ask me, but correct and consistent:
ROOT
<space>PARENT
<space><tab><space>CHILD
<space><tab><space><tab><tab>GRANDCHILD
<space><tab><space><tab><tab>GRANDCHILD2
<space>SIBLING
Inconsistent:
ROOT
<space>PARENT
<tab><space>CHILD
<space><space><tab>GRANDCHILD
<space><tab><tab>GRANDCHILD2
<tab>SIBLING
Also, when going back to a parent level, the exact same indenting must be used
as before in that node:
Incorrect:
ROOT
<tab>PARENT
<tab><tab><tab>CHILD
<tab><tab>SIBLING
As not really intended side effect, it is also permitted to indent the entire
file starting from the root level. We could guard against it but there's no
harm:
Correct and consistent:
<tab>ROOT
<tab><tab>PARENT
<tab><tab><tab><tab>CHILD
<tab><tab>SIBLING
Implementation:
Track parent nodes state: whenever a command enters a child node, push a parent
node onto an llist to remember the exact indentation characters used for that
level.
As soon as the first line on a child node is parsed, remember this new
indentation (which must have a longer strlen() than its parent level) to apply
to all remaining child siblings and grandchildren.
If the amount of spaces that indent a following VTY command are less than this
expected indentation, call vty_go_parent() until it matches up.
At any level, if the common length of indentation characters mismatch, abort
parsing in error.
Transitions to child node are spread across VTY implementations and are hard to
change. But transitions to the parent node are all handled by vty_go_parent().
By popping a parent from the list of parents in vty_go_parent(), we can also
detect that a command has changed the node without changing the parent, hence
it must have stepped into a child node, and we can push a parent frame.
The behavior on the interactive telnet VTY remains unchanged.
Change-Id: I24cbb3f6de111f2d31110c3c484c066f1153aac9
For interactive telnet VTY, remove the implicit move up to the parent node when
a command did not succeed on the current node level.
When reading config files, this behavior was useful to allow skipping explicit
'exit' commands. (A different patch deals with that.)
In the telnet VTY, this behavior was never necessary. Explicit 'exit' commands
can move to the parent node, and typically uninformed users expect to require
that.
On a telnet VTY, counting indents like for reading config files is not an
option: a user will always type from the first column or may paste some leading
spaces without intended meaning.
After this patch, it is thus no longer possible to paste a complete config
across several node levels directly to a telnet session, unless it contains
'exit' commands.
Change-Id: Id73cba2dd34676bad8a130e9c45e67a272f19588
When doing UMTS AKA with AUTS, it can be interesting to know the SQN.MS that
was encoded in the AUTS. The only way to know this is to provide it as a
separate out-parameter from milenage_gen_vec_auts(), because the SQN.MS from
AUTS stored in umts.sqn is immediately modified non-trivially by
milenage_gen_vec(). Add sqn_ms to struct osmo_sub_auth_data to retain SQN.MS
even after a vector was generated.
Use this to print out SQN.MS for 'osmo-auc-gen -3 -A'.
Adjust test suite expectations.
Related: OS#2464
Change-Id: I9fc05bbf169d06716f40b995154fd42a3f91bef3
Make ind_mask available in the main(){} scope, in order to print out
IND = SQN & ind_mask.
Adjust test suite expectations.
Related: OS#2465
Change-Id: I91eac53c4af66a58b9372d9baf5781fc9f29b1fc
osmo-auc-gen so far does not allow indicating the IND bit length of SQN. A
default of 5 serves most practical cases, nevertheless we should allow passing
arbitrary IND lengths.
Enhance the test suite to test --ind-len.
Related: OS#2465
Change-Id: Ia1d8b6a823ffc92290b3e39e4e4665aeff80ccc0
During UMTS AKA, the caller typically indicates which IND slot the next used
SQN should belong to. Without this option, osmo-auc-gen will always produce SQN
from IND-slot 0. Add --ind option.
Enhance the osmo-auc-gen_test.sh to expect errors with useful printouts on
stderr, and add tests that verify valid --ind ranges.
Related: OS#2465
Change-Id: Ib60eec80d58ca9a0a01e7fbd2bcbbd4339b1a6d8
Most USIM out there seem to use IND-length = 5 bits, so do sysmousim-sjs1.
Currently from initialization we are using an IND length of zero in
osmo-auc-gen, which produces confusing SQN results after AUTS:
Where want SQN to be incremented to the next IND array, usually +32, an IND-len
of 0 makes for only +1.
As result, the osmo-auc-gen_test.sh produces SQN 32 instead of 24 after
receiving SQN.MS = 23 from AUTS: adjust test expectations.
Related: OS#2465
Change-Id: I9fcc11fa2b5816302dcc6b72249b1ee40d5a61f5
osmo-auc-gen tries to be helpful by deriving the SQN.MS from the SQN that
resulted from AUTS + milenage_gen_vec(), but there is actually no way to derive
the actual AUTS SQN.MS from the resulting SQN.
Completely drop the printout to prevent confusion.
Adjust test suite expectations.
Related: OS#2464
Change-Id: Ie2432c6d6a23818f7b3a29b1295dcbb505e2be53
These PRBS sequences are specified in ITU-T O.150. They are typically
used as test data to be transmitted for BER (bit error rate) testing.
Change-Id: I227b6a6e86a251460ecb816afa9a7439d5fb94d1
These fields can be in the ISD and the PDP Context inofmration. Store
pointers to this IE in both cases. It needs to be used by the SGSN
when opening a PDP context.
Change-Id: Iedc7c02adcf77ca5c9545119e19c968dfbbb3e6b
In a string like
127.0.0.1:2905<->127.0.0.1:60661
it is hard to tell which is the local part. I'd have expected it on the left,
but it is actually on the right.
To avoid doubt and bypass bikesheds on which side should be what, clearly mark
the two sides as remote and local.
(r=127.0.0.1:2905<->l=127.0.0.1:60661)
Change-Id: I43dcc6a1906429bd0955fd7fe2eb5b8495b592d8
The implementation of the parser/generator for the speech codec
information element slightly wrong, making it impossible to use
it properly.
(See also: 3GPP TS 48.008, 3.2.2.103)
Change-Id: Idabb0f9620659557672e1c6b90c75481192e5c89
This way we clean the build of warnings completely and we can enable
-Werror but we still see this FIXME message while compiling.
Change-Id: I24c11226cd5bb5b6032f4ece7d1a0695dc82f0dd
Several warnings like the one below are fixed:
warning: array subscript is below array bounds [-Warray-bounds]
uint8_t *unchanged_ptr = buf - 1;
Change-Id: I35d7d926939c14700cbca732bd64e588c75424b4
Commit 0d4e949e22 changed the code to use
functions with local variables holding the bytes, but forgot to remove
the old global variables.
This test fixes compilation warnings.
Change-Id: I140de30038222b0419423d8c4f9da1946651a4e7
According to GCC's online docs:
When an inline function is not static, then the compiler must
assume that there may be calls from other source files; since
a global symbol can be defined only once in any program, the
function must not be defined in the other source files, so the
calls therein cannot be integrated. Therefore, a non-static
inline function is always compiled on its own in the usual fashion.
There is no any (performance or size) benefit from 'inline' keyword
in this particular file, so let's replace one by 'static'.
Change-Id: I11e1f1cfea09c6f0cf8225239e782b551d3eb52f
Based on ETSI TS 101 318 section 5.1.2 the 95 bits SID code word
is not detected correctly due to a wrongful offset in the bits
location indexes.
Change-Id: I45d98c6edf267f313883503a65385190ffbc65ca
We need to have an architecture-independend way of endian conversion /
byte swapping functions which will also work on embedded (bare iron)
builds. Let's introduce osmocom/core/bytesawp.h for this purpose.
Change-Id: Ibc0cc1e36d4ed63a35cf8ceff3af0f26e5ac7a3d
Previously the 'passed' variable in test_expansion() was being
overwritten on every call of _compare_mem(), so only the result
of last call influenced the test result.
Change-Id: Ibf3ab453c20c7eeec234b95bfe14b497c572c35f
Neels Hofmeyr
Harald Welte
Philipp Maier
Neels Hofmeyr
Pau Espin