Currently there's a big mess where include dir osmocom/gprs/ is used by
both libosmogsm and libosmogb.
Most of the header files under osmocom/gprs/ are actually all the
headers of libosmogb (there's no osmocom/gb/ dir). But a couple files
are actually RLC/MAC (TS 44.060) related are are also stored in there.
Those files have no relation/use in Gb, and are actually interused with
GSM (eg System Information 13 Rest Octets).
Hence, it makes sense to have the RLC/MAC related parts inside
osmocom/gsm/ as they should be in libosmogsm (and they actually are,
see gprs_rlc.h function implemented in src/gsm/gsm48_rest_octets.c).
The fact that some libosmogsm headers were placed in osmocom/gprs
instead of osmocom/gsm already created some issues, like
libosmocore.spec.in putting "%_includedir/%name/osmocom/gprs/" under
libosmogb, which is wrong.
As a first step to fix the mess, we move the 2 RLC/MAC headers currently
under osmocom/gprs/{gprs_rlc,protocol/gsm_04_60}.h under a single header
gsm/protocol/gsm_44_060.h
The two old headers are left existing for backward compatibility and now
simply include the new libosmogsm header, plus a warning asking users to
switch to the new header so we can eventually get rid of them.
This means libosmogb depends on libosmogsm, which is fine and was
already the case beforehand (libosmogb using functions like
gsm48_encode_ra() and linking against it in src/gb/Makefile.am).
Change-Id: I70cc21bf25a7081070738abacb409ed19094c3b2
Rename contrib/struct_endianess.py to contrib/struct_endianness.py, and
fix the typo everywhere. This is in preparation to call the script in
CI on all repositories.
Related: OS#5884
Change-Id: Idc4af9098ba1de26243464c772d6ea8be330646a
When someone is modifying a given library there's no need to be looking
at a common file contains tons of lines from different libraries.
Furthermore, this removes the need of "nobase" autofoo prefix, hence
following the usual directive of having one Makefile per directory.
Change-Id: I785891c2f89114bf8303c799094b637d3d25ac71
Unfortunately "-std=c99" is not sufficient to make gcc ignore code that
uses constructs of earlier C standards, which were abandoned in C99.
See https://lwn.net/ml/fedora-devel/Y1kvF35WozzGBpc8@redhat.com/ for
some related discussion.
Change-Id: I84fd99442d0cc400fa562fa33623c142649230e2
There are cases where we want to be notified of a successful BVC reset,
e.g. for a signalling because we can then start resetting the PtP-BVCs.
With this hook it's now possible to do that.
Change-Id: If240dd13f0f674693018c93390386b2c8afb97af
Related: SYS#5908
This way the related files are not changed when running the script to
generate struct fields for big endian systems.
Change-Id: I830e0961331a73f8dceb1a5a1c879798541752fd
This reverts commit 43ad616e4b.
_enc_ functions are for some ies while the _encode_ and _decode_ are
for the full pdu. so the old name is correct.
Change-Id: Ib0b4a6fd7f8c96e4647a373541e3cccb324c6a11
The symbol was not in the list of exported symbols.
Take the chance that it was not used anywhere outside libosmocore to
rename it in order to follow similar naming as other existing APIs.
Change-Id: I534db7d8bc5ceb19a2a6866f07d5f5c70e456c5c
When doing a "show ns", let's also dump the state of the frame
relay network, with all its links and DLCs (if any).
Change-Id: I798af3e97dc014b6e0fcde86560a1809852f7510
Related: OS#4877
gprs_ns2_create_nse() doesn't allow the caller to specify if the
BSS or the SGSN role of IP-SNS shall be implemented. Add
gprs_ns2_create_nse2() to fix that.
Change-Id: I6db8c36f7c69b592d7d0fbcf323804f7e9912be2
Related: OS#3373
To support SGSN oriented RESET introduce a role flag to
track what's running the gprs_bssgp (local side).
Related: OS#3879
Change-Id: Ibcbaffa94cbdc4296a8a7c372304ac11d50d9559
Introduce a `ip-sns-bind BINDID` vty command within a `nse` vty object.
The ip-sns-bind defines the binds which will be used by the dynamic
configuration with IP-SNS.
This is only the first part which only uses the binds when doing a
new SNS configuration.
The outgoing add procedure will be supported in a later patch
when the SNS fsm supports outgoing procedures.
This is a behaviour change of the API and must be synchronized with
the osmo-pcu. Otherwise SNS won't work with osmo-pcu.
Related: SYS#5354
Change-Id: I9ab8092bf286e7d90e92f5702a5404425e959c84
The BSSGP layer needs to know the MTU of the NS UNIDATA payload.
The MTU can be 0 if the NSE doesn't contain any NSVC.
Every status indication will contain the mtu value.
The MTU in the status indication contains the maximum transfer
unit of a BSSGP message. From NS side the maximum SDU.
Related: OS#4889
Change-Id: I5016b295db6185ec131d83089cf6c806e34ef1b6
bssgp_bvc_get_features_* are fsm "methods" and the name should indicate
that just lika all other function names in bssgp_bvc_fsm.h
Change-Id: I30fbbe36cdabf9635eaf4dfb1e93c8ce0f667b39
Add functions to get/set the maximum supported BSSGP PDU size by the NS
layer.
IPv4 and IPv6 should not matter since we can just enable IP
fragmentation and send NS PDUs up to 2**16 + bytes. Frame relay does not
support fragmentation and this is the reason we need to be aware of the
maximum PDU size. Luckily with 1600 bytes the MTU in frame relay can hold a
regular IP packet including NS/BSSGP overhead.
On the NS layer this corresponds to the size of an NS SDU in NS-UNITDATA
(3GPP TS 48.016 Ch. 9.2.10)
Change-Id: I9bb82ead27366b7370c9ff968e03ca2113ec11f0
Related: OS#4889
Allow to assign a signalling and data weight to UDP binds.
Those weights will be used when doing dynamic configuration over
IP-SNS.
This is only the first part which only uses the assigned weights
when doing a new SNS configuration.
The outgoing change weight procedure will be supported in a later patch
when the SNS fsm supports outgoing procedures.
Related: SYS#5354
Change-Id: I5133e4229377d44772a9af28628a2bc420fea34b
gprs_bssgp and gprs_bssgp_util.c also contains code related to send and
receive RIM PDUs via BSSGP and also code to encode and decode RAN
INFORMATION PDUs. Lets move this to gprs_bssgp_rim.c
Change-Id: Icda279452962b06e552cb1361d2a27b7dc8a6b04
Related: SYS#5103
The call was only introduced as workaround for the first implementation
of vty. There is no need for this anymore. The configuration can
just add "accept-ipaccess" to the bind to allow creation of dynamic
ipaccess NSE.
Change-Id: Ie924ead6da17657f3da334068c8ada82c8845495
Drop the vty(1) code and replace it with vty2. The vty(1) was only
used as intermediate to not develop a vty while developing a new
code base behind. Users of gprs_ns2_ has to use the new vty code.
API change which must be synchronized with osmo-pcu,
osmo-gbproxy, osmo-sgsn.
Change-Id: Ic2059e75d8ede8e5c29c4fef6be608ed79c8a97c
This reverts commit b306094448.
It was merged too quickly and patches for projects using related
features are not yet prepared.
Change-Id: I8a2aaf74a47de8f4f0adb37d16426d199788e3fe
Drop the vty(1) code and replace it with vty2. The vty(1) was only
used as intermediate to not develop a vty while developing a new
code base behind. Users of gprs_ns2_ has to use the new vty code.
API change which must be synchronized with osmo-pcu,
osmo-gbproxy, osmo-sgsn.
Change-Id: I8c3f2afecc74b78f7f914f7dce166cbcb63444eb
All public enum should have the prefix GPRS_NS2_.
API change which must be synchronized with osmo-pcu,
osmo-gbproxy, osmo-sgsn.
Change-Id: I548ff12f7277cbb7e1a630a3dc02b738ce89be72
RIM routing formation structs can contain different variants of address
identifiers, so it is difficult for an API user to pick the _name()
function to generate a human readable string. Lets add
bssgp_rim_ri_name() and bssgp_rim_ri_name_buf() to make printing a
routing identifier easier.
Change-Id: Idca6bdccffe663aea71a0183ca3ea5bb5b59e702
Related: SYS#5103
At the moment libosmogb offers no convinient way to send RIM PDUs. Also
parsing an incoming RIM messages into destination, source routing
info and RIM container is not available.
Change-Id: I18134fd9938040d2facb6beee3732628b167ce8c
Related: SYS#5103
The function bssgp_parse_rim_ri() and bssgp_create_rim_ri() are located
in gprs_bssgp.c, since there is now a gprs_bssgp_rim.c module it makes
more sense to put them there. Also adjust the code a bit so that its
more intuitive to read.
Change-Id: Icd667f41d5735de56cd9fb257670337c679dd258
Related: SYS#5103
BSSGP RIM uses a number of nested containers to signal RIM application
specific payload information in a generic way. Lets add the container
structurs required for NACC.
Depends: libosmocore If48f412c32e8e5a3e604a78d12b74787a4786374
Change-Id: Ibbc7fd67658e3040c12abb5706fe9d1f31894352
Related: SYS#5103
3GPP TS 48.018, section 11.3.65 describes an IE to transfer some control
flags via a RIM container. The IE is essentially just a bitfield, so it
can be parsed by overlaying it with a C-struct. Lets add an appropiate
struct to protocol/gsm_08_18.h
Change-Id: I781ab838bd02ac1b13d384ce3f4259e26cedb61e
Related: SYS#5103
This is required in order to tell MS that osmo-pcu now supports
Network Assisted Cell Change (NACC).
Related: SYS#4909
Change-Id: I2aaa8c1107c977f711c2d7530034f57e36e3a237
The RIM Routing Information IE (see also 3GPP TS 48.018, section
11.3.70) is used to control the flow of BSSGP rim messages at the SGSN.
Change-Id: I6f88a9aeeb50a612d32e9efd23040c9740bc4f11
Related: SYS#5103
The IP-SNS requires at least one initial remote address of the SGSN.
However it should be multiple initial remote address instead of a single
in case the interface might fail.
Rework the SNS to support multiple initial remote addresses.
Change-Id: I71cdbfb53e361e6112fed5e2712236d797ef3ab2
Add gprs_ns2_fr_connect2() and change gprs_ns2_fr_connect() to
be similar to gprs_ns2_ip_connect() and gprs_ns2_connect2().
This is an API break but there wasn't yet a release with NS2.
Change-Id: I4e1374b0e979b3293302c5ed46a91a58f3a5a916
Every bind will have a unique name. Add a name argument
to all bind creating functions and require them to be unique.
This is an API break but there wasn't yet a release with NS2.
Change-Id: I8f1d66b7b3b12da12db8b5e6bd08c1beff085b3e
A NS dialect describes how the NS Entity interacts with
different virtual circuits. E.g. ipaccess use reset/block on udp
and is a dynamic connection.
A single NS Entity can only support one dialect. This can be later
used to protect a NS Entity against dynamic NS virtual circuits of a
different type.
It further allows a bind to support multiple dialects at the same time.
Change-Id: Ia118bb6f994845d84db09de7a94856f5ca573404
Pau Espin
Oliver Smith
Harald Welte
Alexander Couzens
Daniel Willmann
Philipp Maier