Those are available in 3GPP TS 48.008 version 16.0.0 Release 16, section
3.2.2.17 Cell Identifier. It can be seen that we have a collision
between the osmocom non-standard format and the SAI standard one.
This is because CGI-PS is not really a TS 48.008 Cell Identifier, but only
specified in TS 48.018 and has no ID number assigned. The CGI-PS was
added there because the whole osmo-bsc neighbour configuration works
with CellIds to manage neighbours, so it felt natural to extend the APIs
to also provide means to use CGI-PS format (TS 48.018 even refers 48.008
existance and mentions there's no explicit ID).
At the time this Cell Identifier was added, the firstly available number
(11) was taken, which was of course a really bad idea since newer
versions of the spec can at some point use it, which is the case if one
checks for instance TS 48.008 Release 16 SAI Cell Id.
There no perfect way to fix this bad decision at the time, but the
CGI-PS is only used in osmo-bsc and only for RIM related purposes, so by
changing the ID of CELL_IDENT_WHOLE_GLOBAL_PS, we only break RIM under
some specific CIs being used, and when an osmo-bsc is built against
older libosmocore and then used at runtime against a newer libosmocore
(which should be rare).
Hence, the downside is acceptable, and by moving the new ID number to be
ouside of the spec proto TS 48.008 range (4 bits), we make sure we don't
have the same problem again in the future.
Related: SYS#5838
Fixes: ca33a71ca8
Change-Id: Id25e563febdb7640174540136225f399515a0089
In general, it's safe not to use talloc API here because those are
internal allocations, and there are no 'return' statements between
calloc() and free(). However, we don't really need to initialize
the heap memory with 0, so let's use the 'normal' malloc().
Change-Id: I6956cbd83b2999dbcf8e2d210134b0a166c33efb
The event names contain '.', and there are spaces ' ' in the state
names. This is a problem since states and events can also be monitored
via the CTRL interface. Unfortunately the CTRL interface does not allow
certain reserved characters. So lets rename the states and event names
to make them compatible with the CTRL interface.
Change-Id: Id19973b56f9d7b1e3d0b0d7c7d0be7beba5428fc
Related OS#4149
Change-Id: I5ebc9ab5b1456fee29aa4e254fae862dc053f0aa
The parameters described in the docstrings for osmo_plmn_from_bcd() do not match the actual parameter list.
Change-Id: Ic0999dbe096a98418db7482bd110e20497d8e4a5
This allows init-passive users to get the configured sizes for the RFCIs
and other similar information once engotiated with the peer.
Realted: OS#1937
Change-Id: I63ee780b4aa162ea097410b234e73984000c0965
The use of an unsinged integer as for loop counter variable doesn't
work when counting down and comparing with >= 0. The existing code
would be an infinite loop if it wasn't for the (data dependent) break
condition:
>>> CID 243259: Control flow issues (NO_EFFECT)
>>> This greater-than-or-equal-to-zero comparison of an unsigned value is always true. "i >= 0U".
572 for (i = 15; i >= 0; i--) {
573 if (match_mask & (1<<i)) {
574 iui->mode_version = i;
575 break;
576 }
Change-Id: I019d0f0d8f2b167575a2883a13cca692c96961cf
Closes: CID#243259
Only support for SMpSDU mode is introduced in this commit.
Not supported explicit list:
- Transparent mode
- ATM/AAL2 based Transport layer
- GTP-U based Transport Layer
- Iu Rate Control procedure
- Time Alignment procedure
APIs are provided to allocate the primitives properly inside the related
msgb. This way primitives can be placed in the headroom, leaving the
data part of the msgb for the IuUP payload, hence allowing re-use of the
msgb and 0 copy of IuUP payload when forwarding data over RNL<->TNL.
Since RNL and TNL primitives relu struct osmo_prim_header, which is not
packed, they cannot be set to packed, and hence proper memory alignment
in the msgb must be done to avoid misaligned accesses (Asan errors about
it otherwise).
Related: SYS#5516
Change-Id: Ibe356fa7b1abaca0091e368db8478e79c09c6cb0
Remove the paragraph about writing to the Free Software Foundation's
mailing address. The FSF has changed addresses in the past, and may do
so again. In 2021 this is not useful, let's rather have a bit less
boilerplate at the start of source files.
Change-Id: I5050285e75cf120407a1d883e99b3c4bcae8ffd7
Replace some with atoi(), where the VTY has already validated correct
range of the argument.
Replace others with the new osmo_str_to_int() or osmo_str_to_int64()
functions, possibly covering more detection of invalid number strings.
Leave those strtol() callers that depend on endptr to provide the next
string token.
Related: SYS#5542
Change-Id: I0ebb06e751c28f7d1cdf328de29cd227a2449391
20 bytes is not enough for some VAMOS specific channel number values,
so the resulting string representation gets truncated by snprintf():
expected: "VAMOS TCH/H(0) on TS4\0"
actual: "VAMOS TCH/H(0) on T\0"
Let's enlarge the buffers to 32 bytes.
Change-Id: I68d839f4ab742cf56de34e7e22572a1163aec2da
This commit adds new Osmocom specific IEs required to pass C/I related
Power Control Parameters osmo-bsc => osmo-bts to be used by the MS Power
Control Loop being implemented.
Related: SYS#4917
Change-Id: Iffef0611430ad6c90606149c398d80158633bbca
To indicate to the BSC that a BTS supports temporary overpower of
SACCH/FACCH channels a new feature BTS_FEAT_ACCH_TOP is added.
Change-Id: I62fbfc30acd5d67b20727b75a8f256e6b5d31e06
Related: SYS#5319
To transfer the temporary overpower value from the BSC to the BTS, a new
RSL IE (RSL_IE_OSMO_TOP_ACCH_CAP) is added.
Change-Id: I31c5be4bceb9140d63ab8e2f197f0acc68699426
Related: SYS#5319
After my system's gcc was upgraded, I get false positivies in a couple
places. Let's initialize those to make gcc happy.
"""
/git/libosmocore/src/socket.c: In function ‘osmo_sock_init’:
/git/libosmocore/src/socket.c:958:25: error: ‘sfd’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
958 | close(sfd);
| ^~~~~~~~~~
/git/libosmocore/src/gsm/gsm48.c: In function ‘osmo_mobile_identity_decode’:
/git/libosmocore/src/gsm/gsm48.c:690:20: error: ‘str_size’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
690 | if (rc < 1 || rc >= str_size) {
| ~~~~~~~^~~~~~~~~~~~~~~~~
/git/libosmocore/src/gsm/gsm48.c:679:22: error: ‘str’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
679 | rc = osmo_bcd2str(str, str_size, mi_data, 1, 1 + nibbles_len, allow_hex);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"""
Change-Id: I8aacfbc21e23f63a65e8baee3fd536a1fe1bdd8a
This feature signals support to configure Osmocom Dynamic Timeslot type
as SDCCH8, on top of historically supported TCH/H and TCH/F.
The idea is that when unneeded, the TS is configured as PDCH, and as
soon as there's need for an SDCCH and there's none available, the TS is
dynamically reconfigured to SDCCH8. Once all logical channels in the
dynamic TS are released and hence becomes free, the BSC will reconfigure
it to PDCH.
Related: SYS#5309
Change-Id: Ifc0ca8916bd3e93e5a60a7dd7391d2588fdb5532
They will gain support to be activated as SDCCH/8 soon too. Since new
name would start to be too large, use a more generic naming for it.
Related: OS#5309
Change-Id: I56dcfe4d17899630b17f80145c3ced72f1e91e68
Prepare for A5/4 support in osmo-msc.
Add new function gsm0808_create_cipher2() which takes a struct as
argument instead of individual fields. This is akin to e.g.
gsm0808_create_handover_request() below in the file, and allows
backwards compatibly extending the argument list without needing a new
function signature every time.
Add struct gsm0808_cipher_mode_command, as argument list for
gsm0808_create_cipher2(), with kc128 included.
Encode the Kc128 IE in gsm0808_create_cipher2().
Implement gsm0808_create_cipher() by calling gsm0808_create_cipher2().
Change-Id: Ib3906085e0c6e5a496a9f755f0f786238a86ca34
This feature provides the BSC with information on whether the BTS talks
the IPAC_PROTO_EXT_PCU osmocom extension over the underlying IPA
multiplex of the OML link.
Related: SYS#5303
Change-Id: Id62421f7f5540875ac877a187757f2cf0556bd02
generic sha code from git://w1.fi/hostap.git commit
5ea93947ca67ba83529798b806a15b247cdb2e93 which also happens
to be the source of our milenage code.
Related: SYS#5324
Change-Id: Ibf2e49edada944d91ceba62bd0d6b6ce69261fcd
When modifying chan modes, I first thought rather always fail if there
is no equivalent mode.
That is true for gsm48_chan_mode_to_vamos(), but for a change to
non-VAMOS, rather return the unchanged mode for non-VAMOS modes, so that
gsm48_chan_mode_to_non_vamos(GSM_CMODE_SIGN) works without failure.
This makes more convenient checking, e.g. in osmo-bsc's lchan_fsm.c
making sure that a non-VAMOS lchan has a non-VAMOS chan_mode, for all
types of lchans.
Change-Id: Ibf20f04d167e0e0599012ff530bc17ba8c8ab562
This could never possibly have worked. When iterating over the
different IEs to encode, we must of course use the tag of the current
iterator item, and not the hard-coded value of the second tag in the
list.
Change-Id: I148799c5bdb95f70118691c1150330ebac4fdf21
In 2018, I4723361e1094b358310541a7dc4c5c921c778a15 introuced a
check against an integer unterflow. However, the fheck got the
logic wrong, with the result of breaking the function completely:
It would always only detect the first tag within the IPA request
and then take the branch that assumes an integer underflow.
Change-Id: I344975d0bda565ff196a1c0c69305cd349b98a19
Defined in 48.018 10.5.2.82.
This will be used by Channel Mode Modify for VAMOS.
Related: SYS#4895 SYS#5315
Change-Id: I9bad6e7121af43dfa9706635e58279ce672a4e14
Also add functions to convert between VAMOS and non-VAMOS speech modes.
Related: SYS#4895 SYS#5315
Change-Id: Ie0ea592da5610ae70290106d004e549cf3212a89
This will be used by osmo-bts-omldummy to parse features strings from
the cmdline.
Note that osmo_bts_feature_name() already exists to return the longer
descriptive value_strings from osmo_bts_features_descs (_descs!).
Luckily that misses the plural 'features' in the name, so that I can
still add a properly named osmo_bts_features_name() function that only
returns the name, matching the common pattern used in osmocom code.
Related: SYS#4895
Change-Id: I699cd27512887d64d824be680303e70fff3677c1
The warning period encoding was wrong, resulting in way too short
warning periods being encoded than intended/specified by the caller.
Change-Id: Idf3cae48a6ab45550d7bbd937bb49a0e1a4e8aed
Even though the value is only between 0..120s, they didn't encode
it 1:1 in the uint8_t, but 3GPP chose to use the same encoding
as for the warning period (which has a much larger range).
Let's fix this in our implementation.
Before this patch, osmo-cbc wanted to send 30s keep-alive repetition
period, but a spec-compliant receiver actually decoded this as 80s.
Change-Id: I04baa6b6b99b092fa0512b3b6138a363c7f3a13d
CGI-PS type doesn't exist in GSM 08.08 Cell Id lists. That type of cell
id is osmocom-specific and used internally. In here CGI-PS is
automatically converted to CGI (since the later is an extension of this
one).
The encode/decode_cell_id_u are left intact (comment added) since those
can still be used (and are used by RIM code) to encode/decode TS 48.018
Cell Identifiers.
Related: SYS#4909
Change-Id: Id74f4577c397c1ba696f00395858311bd82cb2c8
Neels Hofmeyr
Pau Espin
Vadim Yanitskiy
Philipp Maier
Harald Welte
Oliver Smith
Neels Hofmeyr
Eric Wild