To integrate with an external event loop (in this case glib) we
need to allow an application to get a filled out fd_set and then
dispatch it. osmo_fds and maxfds are static and I decided to keep
it that way and instead create two routines to fill the fdset and
then one to dispatch the result.
The public header file does not include sys/select.h and we can
compile the library without select, so I didn't want to require
having to include this file, and used void * for the parameter.
Mark the routines as inline to avoid a call from the select
function. I have confirmed that inlining has an effect on x86
using Debian's gcc-4.9.2-10 compiler
This function can be used to obtain the osmo_fd corresponding to a given
fd. The latter can be useful when integrating libosmocore main loop
with other libraries.
Add function which adds specified number of bits from each element of
array to the bit vector prefixing each addition with one and finishing
entire sequence with adding 0. This is very common patter for various
repetitive data structures described with CSN.1 in 3GPP standards.
Corresponding test vectors and doxygen headers are added too.
For 3G, I need a BCD composer/parser similar to gsm48_generate_lai()/
gsm48_decode_lai(). Those functions also handle a trivial extra
member (lac) which I don't need in this way for 3G.
So create new functions to take on the MCC+MNC BCD handling and call those
from gsm48_generate_lai() and gsm48_decode_lai(). In this way, the 3G code
in openbsc can use only the BCD functionality without code duplication.
Various users of gsm48_hdr apply the same hardcoded shifts/bitmasks to obtain
the transaction ID encoded in the upper nibble of the protocol discriminator.
Centralize. Patch for openbsc.git will follow.
Add inline functions for both release <= 98 and release >= 99 as well as a
default define. Use the release 98 by default since the current code base uses
the r98 bitmasks.
These inline functions relieve callers of the decision on masking bits of the
protocol discriminator and message type octets.
Also add a define for the protocol discriminator extension to one octet length
(GSM48_PDISC_EXTEND).
Apply new pdisc function in gsm0480.c.
[hfreyther: Make the hdr param const]
Currently the LOGP/DEBUGP arguments are always evaluated even if
no logging will happen at all. This can be expensive, for instance
if hexdumps or pretty printed object names are generated. This causes
high base load especially on embedded devices and is a major part of
CPU usage e.g. of the osmo-pcu.
This commit uses the log_check_level function to avoid the evaluation
of the parameters if it is known in advance, that no logging entry
will be generated.
Sponsored-by: On-Waves ehf
This commit adds this predicate function which can be used to
avoid the execution of code if a certain log level is not enabled.
The function will only return 0 (false), if it is sure that a logging
call for the same facility and level will not produce any output.
This safety criterion shall ensure, that no logging output is lost
due to the use of this predicate as a guard. On the other hand, even
if the predicate returns != 0 (true), no logging output might get
generated by a similar logging command.
Note that the current implementation is not focussed on performance,
which could be improved by using a lookup table instead of iterating
through every target.
Sponsored-by: On-Waves ehf
It's sometimes handy for debugging to be able to immediately see which
bits are set in a given byte. Generalize macro used for that in bitvec
tests and make it available for the rest of the library.
This may seem like overkill for a mere const char * config item, but it makes
the Control interface VTY commands reusable in any main() scope (inspired by
libosmo-abis' VTY config).
Add API functions ctrl_vty_init() and ctrl_vty_get_bind_addr(), in new files
src/ctrl/control_vty.c and include/osmocom/ctrl/control_vty.h, compiled and/or
installed dependent on ENABLE_VTY.
Using these functions allows configuring a static const char* with the VTY
commands
ctrl
bind A.B.C.D
which callers shall subsequently use to bind the Control interface to a
specific local interface address, by passing the return value of
ctrl_vty_get_bind_addr() to control_interface_setup().
Add CTRL_NODE to enum node_type, "eating" RESERVED4_NODE to heed that comment
on avoiding ABI changes.
Make the ctrl interface bind address configurable, so that it may be made
available on other addresses than 127.0.0.1. The specific aim is to allow
running multiple osmo-nitbs alongside each other (commits in openbsc follow).
Add VTY command
line vty
bind A.B.C.D
The command merely stores the configured IP-address, which can then be used by
the calling main program to set the telnet port of the VTY line. (Commits in
openbsc and osmo-iuh will follow up on this.)
Add function vty_get_bind_addr() to publish the address in the vty.h API.
Add static vty_bind_addr to store.
For allocation/freeing reasons, a NULL address defaults to 127.0.0.1.
BTW, I decided against allowing keywords 'any' and 'localhost' in place of an
actual IP address to make sure a written config is always identical to the
parsed config.
Previously the presence of header and data blocks were communicated
in-band which decreases code readability and makes it unnecessary hard
to add support for new hardware.
Note: OsmoBTS have to be modified to take advantage of extended
ph_data_param structure.
This function originates from openbsc/src/gprs but is just specific
to BSSGP/Gb on the same level like bssgp_msgb_alloc.
This commit puts the former gprs_msgb_copy function beside
bssgp_msgb_alloc.
Renamed function:
gprs_msgb_copy -> bssgp_msgb_copy
Sponsored-by: On-Waves ehf
Add bit map encoder and decoder functions: decoder is fully functional
while encoder is good enough for testing - no backtracking to find
the best possible compression is implemented. If somebody is willing to
implement MS side of EDGE than this has to be expanded.
Add corresponding tests.
N. B: the encoding is implemented according to ETSI TS 44.060 which is
slightly different from T4 used for fax according to CCITT G31D (RFC 804).
Ticket: OW#2407
Sponsored-by: On-Waves ehf
Signed-off-by: Max <msuraev@sysmocom.de>
bitvec_read_field/bitvec_write_field in the PCU used a C++ reference
and when porting to C it was decided to pass the parameter by value
and this lost the "back propagation" of the new index. Change the
parameter to be an in/out parameter and this way do not have a silent
semantic break in the osmo-pcu (where we copy the reference in csn.1
by value) and have a true compile failure.
Add Max's simple test for bitvec_unhex function leaving the checking
of bitvec_read_field and the side effect in the datastructure about
the number of bits still open.
Allocation, pack/unpack, field access and helper routines used
extensively by Osmo-PCU. Whenever memory allocation happens, alocator
context is passed explicitly by caller.
Currently msgb_trim only checks for len > data_len and returns -1
in that case, allowing the caller to fix it somehow. Using a negative
length will always lead to a corrupt msgb, but this is not being
checked.
This commit adds a check for len < 0 and a conditional call to MSGB_ABORT.
Sponsored-by: On-Waves ehf
The new functions bitvec_get_bytes and bitvec_set_bytes copy
byte sequences from bitvecs to uint8_t arrays and vice versa.
While the bytes in the bitvecs do not need to be aligned, the uint8_t
arrays always are. In case the bytes in the bitvec are aligned, the
implementation uses memcpy.
Note that the implementation like the other existing functions assume
MSB first encoding.
[hfreyther: Squash the comment fix into this commit as well]
Sponsored-by: On-Waves ehf
These functions are currently part of openbsc but also needed by
other projects.
The function have been renamed as follows:
gprs_apn_to_str -> osmo_apn_to_str
gprs_str_to_apn -> osmo_apn_from_str
Sponsored-by: On-Waves ehf
These functions originate from openbsc/src/gprs but are generic
msgb helper functions.
msgb_copy: This function allocates a new msgb, copies the data
buffer of msg, and adjusts the pointers (incl. l1h-l4h)
accordingly.
msgb_resize_area:
This resizes a sub area of the msgb data and adjusts the
pointers (incl. l1h-l4h) accordingly.
Sponsored-by: On-Waves ehf
Max
Harald Welte
Neels Hofmeyr