This reverts commit 43ad616e4b.
_enc_ functions are for some ies while the _encode_ and _decode_ are
for the full pdu. so the old name is correct.
Change-Id: Ib0b4a6fd7f8c96e4647a373541e3cccb324c6a11
The symbol was not in the list of exported symbols.
Take the chance that it was not used anywhere outside libosmocore to
rename it in order to follow similar naming as other existing APIs.
Change-Id: I534db7d8bc5ceb19a2a6866f07d5f5c70e456c5c
gprs_ns2_create_nse() doesn't allow the caller to specify if the
BSS or the SGSN role of IP-SNS shall be implemented. Add
gprs_ns2_create_nse2() to fix that.
Change-Id: I6db8c36f7c69b592d7d0fbcf323804f7e9912be2
Related: OS#3373
Introduce a `ip-sns-bind BINDID` vty command within a `nse` vty object.
The ip-sns-bind defines the binds which will be used by the dynamic
configuration with IP-SNS.
This is only the first part which only uses the binds when doing a
new SNS configuration.
The outgoing add procedure will be supported in a later patch
when the SNS fsm supports outgoing procedures.
This is a behaviour change of the API and must be synchronized with
the osmo-pcu. Otherwise SNS won't work with osmo-pcu.
Related: SYS#5354
Change-Id: I9ab8092bf286e7d90e92f5702a5404425e959c84
bssgp_bvc_get_features_* are fsm "methods" and the name should indicate
that just lika all other function names in bssgp_bvc_fsm.h
Change-Id: I30fbbe36cdabf9635eaf4dfb1e93c8ce0f667b39
Add functions to get/set the maximum supported BSSGP PDU size by the NS
layer.
IPv4 and IPv6 should not matter since we can just enable IP
fragmentation and send NS PDUs up to 2**16 + bytes. Frame relay does not
support fragmentation and this is the reason we need to be aware of the
maximum PDU size. Luckily with 1600 bytes the MTU in frame relay can hold a
regular IP packet including NS/BSSGP overhead.
On the NS layer this corresponds to the size of an NS SDU in NS-UNITDATA
(3GPP TS 48.016 Ch. 9.2.10)
Change-Id: I9bb82ead27366b7370c9ff968e03ca2113ec11f0
Related: OS#4889
Allow to assign a signalling and data weight to UDP binds.
Those weights will be used when doing dynamic configuration over
IP-SNS.
This is only the first part which only uses the assigned weights
when doing a new SNS configuration.
The outgoing change weight procedure will be supported in a later patch
when the SNS fsm supports outgoing procedures.
Related: SYS#5354
Change-Id: I5133e4229377d44772a9af28628a2bc420fea34b
The gprs_ns2_vty_init_reduced() call initialized the ns2 vty without
configuration nodes (except timeout). The PCU can be only configured
by the BTS/BSC. It should not configured by vty.
Change-Id: I4437da74bd48ba64d3f16ea67afc26c45b6d3ac9
The call was only introduced as workaround for the first implementation
of vty. There is no need for this anymore. The configuration can
just add "accept-ipaccess" to the bind to allow creation of dynamic
ipaccess NSE.
Change-Id: Ie924ead6da17657f3da334068c8ada82c8845495
Drop the vty(1) code and replace it with vty2. The vty(1) was only
used as intermediate to not develop a vty while developing a new
code base behind. Users of gprs_ns2_ has to use the new vty code.
API change which must be synchronized with osmo-pcu,
osmo-gbproxy, osmo-sgsn.
Change-Id: Ic2059e75d8ede8e5c29c4fef6be608ed79c8a97c
This reverts commit b306094448.
It was merged too quickly and patches for projects using related
features are not yet prepared.
Change-Id: I8a2aaf74a47de8f4f0adb37d16426d199788e3fe
Drop the vty(1) code and replace it with vty2. The vty(1) was only
used as intermediate to not develop a vty while developing a new
code base behind. Users of gprs_ns2_ has to use the new vty code.
API change which must be synchronized with osmo-pcu,
osmo-gbproxy, osmo-sgsn.
Change-Id: I8c3f2afecc74b78f7f914f7dce166cbcb63444eb
RIM routing formation structs can contain different variants of address
identifiers, so it is difficult for an API user to pick the _name()
function to generate a human readable string. Lets add
bssgp_rim_ri_name() and bssgp_rim_ri_name_buf() to make printing a
routing identifier easier.
Change-Id: Idca6bdccffe663aea71a0183ca3ea5bb5b59e702
Related: SYS#5103
At the moment libosmogb offers no convinient way to send RIM PDUs. Also
parsing an incoming RIM messages into destination, source routing
info and RIM container is not available.
Change-Id: I18134fd9938040d2facb6beee3732628b167ce8c
Related: SYS#5103
BSSGP RIM uses a number of nested containers to signal RIM application
specific payload information in a generic way. Lets add the container
structurs required for NACC.
Depends: libosmocore If48f412c32e8e5a3e604a78d12b74787a4786374
Change-Id: Ibbc7fd67658e3040c12abb5706fe9d1f31894352
Related: SYS#5103
The RIM Routing Information IE (see also 3GPP TS 48.018, section
11.3.70) is used to control the flow of BSSGP rim messages at the SGSN.
Change-Id: I6f88a9aeeb50a612d32e9efd23040c9740bc4f11
Related: SYS#5103
The IP-SNS requires at least one initial remote address of the SGSN.
However it should be multiple initial remote address instead of a single
in case the interface might fail.
Rework the SNS to support multiple initial remote addresses.
Change-Id: I71cdbfb53e361e6112fed5e2712236d797ef3ab2
Every bind will have a unique name. Add a name argument
to all bind creating functions and require them to be unique.
This is an API break but there wasn't yet a release with NS2.
Change-Id: I8f1d66b7b3b12da12db8b5e6bd08c1beff085b3e
A NS dialect describes how the NS Entity interacts with
different virtual circuits. E.g. ipaccess use reset/block on udp
and is a dynamic connection.
A single NS Entity can only support one dialect. This can be later
used to protect a NS Entity against dynamic NS virtual circuits of a
different type.
It further allows a bind to support multiple dialects at the same time.
Change-Id: Ia118bb6f994845d84db09de7a94856f5ca573404
Similar to ns2 superseding ns, we now also intoduce a next generation
of BSSGP related code to libosmogb. However, this is not aiming to
be a full implementation yet, but simply those parts that we currently
need from the revamped osmo-gbproxy.
The gprs_bssgp2.[ch] differs in two ways from the old code:
* it separates message encoding from message transmission
* it supports more recent specs / IEs
bssgp_bvc_fsm.c is a genric implementation of the BSSGP BVC
RESET/BLOCK/UNBLOCK logic with support for both PTP and signaling,
both on the SGSN side and the BSS side.
Change-Id: Icbe8e4f03b68fd73b8eae95f6f6cccd4fa9af95a
Add support for frame relay over dahdi hdlc device.
It's supporting lmi by q933 and supports both
SGSN and BSS.
Change-Id: Id3b49f93d33c271f77cd9c9db03cde6b727a4d30
It's more clear which part of the address is returned.
In preparation to add a gprs_ns2_ip_vc_local.
Change-Id: I6110ff573362961c713a990da7ef3f3dbedf6c57
Add bssgp_ns_send callback() to set the transmission path into the
NS library. This allows to use the Gb implementation with
the old NS and the new upcoming NS implementation.
Users of the old NS implementation don't have to set the callback as
the default is the old NS implementation.
Only users of the new NS implementation need to set the callback and
the callback data.
Change-Id: I3a498e6a0d68b87fed80c64199b22395796761b4
If a BVC-RESET is sent from SGSN, there must not be a cell ID IE
included. See "Note 1" of TS 48.018 Section 10.4.12.
Change-Id: I11d4e70d510265b9c09dffccdab10b3f0816715a
So far we had a function to allocate a new bssgp_bvc_ctx, but not
the opposite one. Let's finally introduce it, so it will be used
at least in OsmoPCU.
Please note that the new symbol has 'bssgp_' prefix, not 'btsctx_'.
Change-Id: Ia78979379dbdccd6e4628c16f00d0c06d9212172
Pau Espin
Harald Welte
Alexander Couzens
Daniel Willmann
Philipp Maier