Add functions to encode and decode Global Call Reference as per
3GPP TS 29.205 Table B 2.1.9.1 add corresponding tests.
Change-Id: Iee95aa4e5c056645b6cb5667e4a067097d52dfbf
Related: OS#2487
At the moment the all gsm0808 cause codes are encoded directly using the
tlv API directly to put a one byte TLV field. This works ok for most
situations where the cause code consists of a single byte. However,
gsm0808 specifies a two byte cause code model where cause codes may be
extended up to two bytes. Instead of implementing the encoding over and
over and again, let's rather have an encoder function we can call.
- Add an encoder function that can generate single byte and extended
cause codeds and makes the length decision automatically.
- Use only this function to append cause codes
Change-Id: I71d58fad89502a43532f60717ca022c15c73f8bb
It's convenient to hold all LCLS-related parameters from 3GPP TS 48.008
in a single structure.
This will be used in follow-up patch handling Assignment Request with
extended parameters as well as corresponding BSC code working with LCLS.
Change-Id: I4b873f9a3c5a5d33b438382971b3d92e40d48d62
Related: OS#2487
That's necessary for 'struct tlv_parsed' definition although lack of it
does not cause build failure in libosmocore for me but does so for
osmo-bsc.
Change-Id: I3b2d3955d02b07dc7ec5e9f0c66cc477196703ed
* add function to generate cipher mode reject with extended (2-byte)
Cause IE
* add function to get (extended) Cause value
* add corresponding (extended cause) test
* update existing (non-extended cause) test
* use enum as a parameter for existing non-extended version to make
interface more unified
Change-Id: Id5509b94a18180a44f45300caaa02b843c166fa3
Related: OS#3187
* add Class definitions
* add helper to check for extended bit
* add helper to get Cause's Class
* use enum in gsm0808_cause_name() and gsm0808_create_cipher_reject() to
avoid confusion between class and cause
* update gsm0808_create_cipher_reject() comments
Change-Id: I31b31dfc22eb4b6b07089e1255246ac458125340
Related: OS#3187
Add a function to convert S0-S15 bits to struct gsm48_multi_rate_conf,
which hold the codec settings for AMR.
Change-Id: I973736273c236eee84decf15868190e339c3fed4
Related: OS#3548
parameter cfg in gsm0808_sc_cfg_from_gsm48_mr_cfg() is used read only.
Lets add a const to make this clear to the compiler.
Change-Id: I31e8d273b070b0afc446a298299d4f502d6c396b
Add a function to convert struct gsm48_multi_rate_conf, which holds the
codec settings for AMR, to S0-S15 bit representation as defined in
3GPP TS 48.008 3.2.2.49
This resurrects change-id I4e656731b16621736c7a2f4e64d9ce63b1064e98
which was reverted in I9e0d405e303ed86d23703ca6362e958dddb2f861
due to gsm0808_test failing.
The test failure is fixed by properly clearing the struct
gsm48_multirate_cfg prior to running tests (add memset(0)).
Change-Id: Ia782e21c206c15e840226d79b4209d13658ee916
Related: OS#3548
Add a function to convert struct gsm48_multi_rate_conf, which holds the
codec settings for AMR, to S0-S15 bit representation as defined in
3GPP TS 48.008 3.2.2.49
Change-Id: I4e656731b16621736c7a2f4e64d9ce63b1064e98
Related: OS#3548
The idea is to be able to add a gsm0808_cell_id to a gsm0808_cell_id_list2:
first convert it to a list, then re-use gsm0808_cell_id_list_add(). It will be
used by osmo-bsc to manage neighbor-BSS cell identifiers from VTY.
Change-Id: Ibf746ac60b1b1e920baf494b396658a5ceabd788
Add:
- gsm0808_current_channel_type_1()
- gsm0808_permitted_speech()
- gsm0808_chosen_channel()
- gsm0808_channel_type_name()
gsm0808_permitted_speech() is moved from osmo-bsc's bssap_speech_from_lchan();
gsm0808_chosen_channel() is moved from osmo-bsc's lchan_to_chosen_channel();
Rationale: will be re-used by inter-BSC handover, makes sense to keep with the
other gsm0808 utils.
Related: OS#2283 (inter-BSC handover, BSC side)
Change-Id: I8a3cc5d4548e9a78d945d54c69ccced251edcec9
Provide comprehensive API to obtain string representations of Cell Identifiers
and -Lists.
Change gsm0808_test.c to use the new functions (which simplifies the output a
bit), so that we don't duplicate printing code in gsm0808_test.c, and so that
the not-so-trivial printing code is also tested.
In gsm0808_test, also test gsm0808_cell_id_list_name_buf()'s return value and
truncation behavior.
The rationale for gsm0808_cell_id_list_name(), i.e. printing an entire list of
cell identifiers, is that even though the maximum is 127 elements, a list of
more than a few elements is hardly ever expected in practice (even more than
one element isn't actually expected: either "entire BSS" or a single LAC). It
is thus useful to log the entire list when it shows up in Paging and Handover.
Change-Id: I9b2106805422f96c5cc96ebb9178451355582df3
Clarify semantics and micro-optimise for the case of single Cell Identifer IEs.
Test in gsm0808_test.c
So far we have gsm0808_enc_cell_id_list2(), but there also exist instances of
single Cell Identifiers (3GPP TS 48.008 3.2.2.17).
It is possible to decode the same using the cell identifier list API, but this
forces the caller to also keep a full struct gsm0808_cell_id_list2 with all its
127 entries around.
E.g. for handover, there are two Cell Identifiers (Serving and Target); I'd
need two full cell id lists for each, and these would be dynamically allocated
for each handover operation, whether it uses them or not.
Related: OS#2283 (inter-BSC HO, BSC side)
Change-Id: I9f9c528965775698ab62ac386af0516192c4b0cc
This will be used by the upcoming neighbor_ident API in osmo-bsc, where the vty
interface allows composing neihbor BSS cell identifier lists, and we want to
allow adding individual items from individual user commands.
It will also be useful to accumulate cell identifiers in case a subscriber sees
multiple alternative cells from a neighboring BSS, and we want to pass these on
to the MSC in a Handover Required.
Related: OS#2283 (inter-BSC HO, BSC side)
Change-Id: I5781f5fa5339c92ab2e2620489b002829d206925
Introduce gsm0808_dec_cell_id_list2() with supports additional types of
cell identifier lists. The new parsing routines are based on similar
routines used by the paging code in osmo-bsc's osmo_bsc_bssap.c.
Likewise, introduce gsm0808_enc_cell_id_list2() with support for the
same additional types of cell identifier lists.
The old API using struct gsm0808_cell_id_list is deprecated.
The previous definition was insufficient because it assumed that all
decoded cell ID types could be represented with a single uint16_t.
It was declared in a GSM protocol header (gsm/protocol/gsm_08_08.h)
despite being a host-side representation of data in an IE.
The only user I am aware of is in osmo-msc, where this struct is used
for one local variable. osmo-msc releases >= 1.1.0 make use of this API.
While here, fix a small bug in a test:
test_gsm0808_enc_dec_cell_id_list_bss() set the cell ID type to 'LAC'
but obviously wants to use type 'BSS'.
Change-Id: Ib7e754f538df0c83298a3c958b4e15a32fcb8abb
Related: OS#2847
Let's fix some erroneous/accidential references to wrong license,
update copyright information where applicable and introduce a
SPDX-License-Identifier to all files.
Change-Id: I39af26c6aaaf5c926966391f6565fc5936be21af
Recent commit 3149b0d076 adds function
gsm0808_chan_type_to_speech_codec() but adds a completely mismatching name in
libosmogsm.map, as well as a definition with a typo in the name.
Fix the entry in libosmogsm.map.
Add the missing 'c' in gsm0808_utils.h
Change-Id: I5a621fa5ef6b632eabbe224f3dd383eacaffb695
Considering the various styles and implications found in the sources, edit
scores of files to follow the same API doc guidelines around the doxygen
grouping and the \file tag.
Many files now show a short description in the generated API doc that was so
far only available as C comment.
The guidelines and reasoning behind it is documented at
https://osmocom.org/projects/cellular-infrastructure/wiki/Guidelines_for_API_documentation
In some instances, remove file comments and add to the corresponding group
instead, to be shared among several files (e.g. bitvec).
Change-Id: Ifa70e77e90462b5eb2b0457c70fd25275910c72b
Typically we don't place comments with the function declarations
in .h files. Not sure why this file has comments for each. The
API doc belongs in the .c file as proper doxygen comments,
and shouldn't be duplicated in the .h file.
In this particular case, doxygen comments are added in the
corresponding c file recently.
Change-Id: I5c4cb55be5ec59a6945b1720b875c5987f1cfaad
The contents of the speech codec element (struct gsm0808_speech_codec),
that is also used in the speech codec list element (struct
gsm0808_speech_codec_list) can be generated directly from the
permitted speech parameter in the channel type field (struct
gsm0808_channel_type) when full AoIP with compressed speech via
RTP/UDP/IP is assumed and when the codec configuration on the air
interface exactly matches the codec configuration on the IP backhaul.
This patch adds a function that can be used as a helper to fill
out spech codec fields by only giving a permitted speech parameter
as input.
Change-Id: I257c972e9fdf0dfe940a8d483447085bd62e50a2
The permitted speech field used in channel type element (struct
gsm0808_channel_type) uses a different representation as
the type field in the speech codec element (struct
gsm0808_speech_codec)
This patch adds a function to convert from permitted speech to
speech codec type.
Change-Id: Ib26a9c20864459b2baaa04f49b6e7902ba44b7cb
The planned support for true A over IP requires the encoding of
the a Cell Identifier List element (see also BSS_MAP_MSG_PAGING).
This commt adds encoding/decoding functionality and tests for
the element mentioned above, however, it is not yet actively used.
Change-Id: I625245dd1dd396fc2bc189e8cd2c444a33042528
The planned support for true A over IP requires the encoding of
the an Encryption Information element (see also BSS_MAP_MSG_CIPHER_MODE_CMD).
This commt adds encoding/decoding functionality and tests for
the element mentioned above, however, it is not yet actively used.
Change-Id: I8262050a9d9fd3f17462cfbb046c6e034dccc6fb
The planned support for true A over IP requires the encoding of
the a Channel Type element (see also ASSIGNMENT REQUEST).
This commt adds encoding/decoding functionality and tests for
the element mentioned above, however, it is not yet actively used.
Change-Id: Id0e2164d84b8cbcc6fe6a090fc7f40a1251421d7
The planned support for true A over IP requires the encoding and
decoding of a so called "Speech Codec Element" element.
This commt adds parsing functionality and tests for the element
mentioned above, however, it is not yet actively used.
Change-Id: I0e1e2edf47adaa45b22d4b0bcae3640dba7ca200
The planned support for true A over IP requires the encoding and
decoding of a so called "AoIP Transport Layer Address" element.
This commt adds parsing functionality and tests for the element
mentioned above, however, it is not yet actively used.
Change-Id: I57933b0a06a3f54ec2a41e6ecb6ced9fbbc89332
Max
Philipp Maier
Neels Hofmeyr
Harald Welte