The sysmobts uses the same OML attributes as IP.access. Because the IP.access
attribute only supports IPv4 as NSVC configuration, add an own attribute.
Change-Id: Ic261bc43a07fa741b97a9c6ec5a9ed6f5ecae588
When I wrote the new I.460 mux + demux code, I failed to realize that
* bit numbers in relevant ITU specs start with 1 as MSB ... 8 as LSB
* sub-slot 0 is bits 1+2, i.e. the two MSBs of a byte
* bit-ordering within each sub-slot is also MSB first
As a result, the code and test data was broken.
Change-Id: I6df7dbf411efbdeaf516e72ac552432bf5a569d0
When calling a user-provided call-back function for the i460 mux
or demux, always pass a pointer to the osmo_i460_subchan the callback
relates to. This way, the user can walk the i460 data structures
to obtain information about which mux/demux instances is calling.
Change-Id: Id842c72ce371a67fe5df6694e195c281aaf607ab
There is no way for the API user to know if the TX queue of the
multiplexer runs empty. However, this is criticil since an empty TX
queue will cause dropout of a TRAU frame, which can have quite severe
effects to the receiving end. Lets add a callback that allows the APU
user to insert appropiate idle frames or silent frames into the queue
before it runs empty.
Change-Id: I88a87724235fe50d55ce6215bb385c044072226e
Related: OS#2547
The define constants for the cause codes "BTS not equipped",
"remote transcoder failure" and "notification overflow" are missing.
Lets add them including value strings.
Change-Id: Ic3e936da00bd256bae03867887851f1a4e30e218
At least on Debian unstable, newlib is [currently?] buggy in that
we need to include sys/types.h before including inttypes.h, otherwise
PRIu64 is not defined.
Change-Id: Ic1c9cdf66cfd5b82bd7e20eaaf05b10e6bdb675e
Closes: OS#4686
When a subchannel is deleted or created the initalization mainly
consists of a memset over the wohle subchannel struct a message buffer
initailization.
However, when we delete a subchannel we also must take of the resetting
of the related struct. Currently this is done with a memest.
Unfortunately this creates not only a memory leak (there might be still
items in the multiplexer tx queue) but also it makes the application
crash when the message buffer is used the next time since the llist_head
of the tx queue looses its initialization.
Lets fix the memory leak problem and the message buffer problem and put
the reset functionality in a single place.
Change-Id: I937a9d4db95f44a860cd2c5dbb660dc1970b9a49
Previous both the IPA nanobts and the sysmobts has been using the IPv4 only OML
attribute NM_ATT_IPACC_NS_LINK_CFG.
A bts with BTS_FEAT_IPV6_NSVC supports IPv6 for NSVC (PCU<Gb>SGSN) using
the new OML attribute NM_ATT_OSMO_NS_LINK_CFG.
Change-Id: I9ef7949f66764b3c639e45eb440122e318da44a0
Follows patch I353adc1aa72377f7d4b3336d2ff47791fb73d62c that was merged too
soon. Applying my code review in form of this fixup patch.
Change-Id: I979bca0c6aaa8fe4feddda922bd2e6c1cb49585b
While processing an I-frame we may deliver its payload to L3. After
returning from L3 procesing, we run some additional code, assuming
the LAPD/DL state has not changed meanwhile.
However, if the application destroys the LAPD/DL meanwhile, our state
might be NULL again, and in this state we should not perform any further
action.
This is one of the cases where synchronous in-line dispatch across
various layers is hitting us. L3 should have an input queue, and only
start processing after all L2 work has completed and we're about to go
back to sleep in select().
Change-Id: I026b64503511002c13c0f4117648c366c48ecc62
Related: OS#1761
Closes: OS#4646
At some points, e.g. when allocating message buffers from the Tx
history, we used to allocate them exactly as large as the defined
headroom plus the user data. This means that the underlying PH layer
(E1 mostly) had no tailroom to add anything to the end of the message.
Especially for DAHDI this is a problem, as we need to make space for
two more bytes of frame check sequence (FCS).
So let's simply make sure we always have some extra space at the end
of such buffers.
Change-Id: Id362ce131157c7513d744b0248c7f78fb75c590c
Related: OS#4644
The previous example showed a type == IMSI while setting a TMSI value.
Rather show how to encode IMSI digits.
Change-Id: I41af6bf0d61443465172123297b1228584d791d6
This feature indicates if the given BTS supports paging coordination,
that is the transmission of CS paging (received on Abis) to be sent
via PACCH/PCU in PS domain fro MS with active TBF.
Change-Id: Ifb2e83eaf05dd36e5b203ed2de1a74864b039e38
Related: OS#2406
Implement better API around 3GPP TS 24.008 Mobile Identity coding.
struct osmo_mobile_identity is a decoded representation of the raw Mobile
Identity, with a string representation as well as dedicated raw uint32_t TMSI.
The aim is to remove all uncertainty about decoded buffer sizes / data types.
I have patches ready for current osmo CNI programs, replacing the Mobile
Identity coding with this new API. Deprecate the old MI API.
osmo-bsc: I71c3b4c65dbfdfa51409e09d4868aea83225338a
osmo-msc: Ic3f969e739654c1e8c387aedeeba5cce07fe2307
osmo-sgsn: I4cacb10bac419633ca0c14f244f9903f7f517b49
Note that some GPRS and SGs related coding is done here in libosmocore and
hence currently remains using the old implementation (see previous version of
this patch: Ic3f969e739654c1e8c387aedeeba5cce07fe2307).
New API functions provide properly size-checking implementations of:
- decoding a raw MI from a bunch of MI octets;
- locating and decoding MI from a full 3GPP TS 24.008 Complete Layer 3 msgb;
- encoding to a buffer;
- encoding to the end of a msgb.
Other than the old gsm48_generate_mid(), omit a TLV tag and length from
encoding. Many callers manually stripped the tag and value after calling
gsm48_generate_mid(). The aim is to leave writing a TL to the caller entirely,
especially since some callers need to use a TvL, i.e. support a variable-size
length of 8 or 16 bit.
New validity checks so far not implemented anywhere else:
- stricter validation of number of digits of IMSI, IMEI, IMEI-SV MI.
- stricter on filler nibbles to be 0xf.
As a result, applications using osmo_mobile_identity will be stricter in
rejecting coding mistakes (some of which we currently have in our test suites,
and which we'll need to fix).
Rationale:
While implementing osmo-bsc's MSC pooling feature in osmo-bsc, this API will be
used to reduce the number of times a Mobile Identity is extracted from a raw
RSL message.
Extracting the Mobile Identity from messages has numerous duplicate
implementations across our code with various levels of specialization.
https://xkcd.com/927/
To name a few:
- libosmocore: gsm48_mi_to_string(), osmo_mi_name_buf()
- osmo-bsc: extract_sub()
- osmo-msc: mm_rx_loc_upd_req(), cm_serv_reuse_conn(), gsm48_rx_mm_serv_req(),
vlr_proc_acc_req()
We have existing functions to produce a human readable string from a Mobile
Identity, more or less awkward:
- gsm48_mi_to_string() decodes a TMSI as a decimal number. These days we use
hexadecimal TMSI everywhere.
- osmo_mi_name_buf() decodes the BCD digits from a raw MI every time, so we'd
need to pass around the raw message bytes. Also, osmo_mi_name_buf() has the
wrong signature, it should return a length like snprintf().
- osmo-bsc's extract_sub() first uses gsm48_mi_to_string() which encodes the
raw uint32_t TMSI to a string, and then calls strtoul() via
tmsi_from_string() to code those back to a raw uint32_t.
Each of the above implementations employ their own size overflow checks, each
invoke osmo_bcd2str() and implement their own TMSI osmo_load32be() handling.
Too much code dup, let's hope that each and every one is correct.
In osmo-bsc, I am now implementing MSC pooling, and need to extract NRI bits
from a TMSI Mobile Identity. Since none of the above functions are general
enough to be re-used, I found myself again copy-pasting Mobile Identity code:
locating the MI in a 24.008 message with proper size checks, decoding MI
octets.
This time I would like it to become a generally re-usable API.
This patch was first merged as Ic3f969e739654c1e8c387aedeeba5cce07fe2307 and
caused test fallout, because it re-implemented old API with the new stricter
decoding. In this patch version, old API remains 1:1 unchanged to avoid such
fallout. Applications will soon switch to the new osmo_mobile_identity API and
become stricter on MI coding when that happens, not implicitly by a new
libosmocore version.
Change-Id: If4f7be606e54cfa1c59084cf169785b1cbda5cf5
This reverts commit d1ceca9d48, as it
introduces regressions in both osmo-msc and osmo-nitb which have been
causing failing builds for several days now.
Change-Id: I4bd958d0cd2ab4b0c4725e6d114f4404d725fcf7
Implement better API around 3GPP TS 24.008 Mobile Identity coding.
struct osmo_mobile_identity is a decoded representation of the raw Mobile
Identity, with a string representation as well as dedicated raw uint32_t TMSI.
The aim is to remove all uncertainty about decoded buffer sizes / data types.
I have patches ready for all osmo programs, completely replacing the Mobile
Identity coding with this new API. Hence deprecate the old MI API.
New API functions provide properly size-checking implementations of:
- decoding a raw MI from a bunch of MI octets;
- locating and decoding MI from a full 3GPP TS 24.008 Complete Layer 3 msgb;
- encoding to a buffer;
- encoding to the end of a msgb.
Other than the old gsm48_generate_mid(), omit a TLV tag and length from
encoding. Many callers manually stripped the tag and value after calling
gsm48_generate_mid(). The aim is to leave writing a TL to the caller entirely,
especially since some callers need to use a TvL, i.e. support a variable-size
length of 8 or 16 bit.
New validity checks so far not implemented anywhere else:
- stricter validation of number of digits of IMSI, IMEI, IMEI-SV MI.
- stricter on filler nibbles to be 0xf.
Rationale:
While implementing osmo-bsc's MSC pooling feature in osmo-bsc, this API will be
used to reduce the number of times a Mobile Identity is extracted from a raw
RSL message.
Extracting the Mobile Identity from messages has numerous duplicate
implementations across our code with various levels of specialization.
https://xkcd.com/927/
To name a few:
- libosmocore: gsm48_mi_to_string(), osmo_mi_name_buf()
- osmo-bsc: extract_sub()
- osmo-msc: mm_rx_loc_upd_req(), cm_serv_reuse_conn(), gsm48_rx_mm_serv_req(),
vlr_proc_acc_req()
We have existing functions to produce a human readable string from a Mobile
Identity, more or less awkward:
- gsm48_mi_to_string() decodes a TMSI as a decimal number. These days we use
hexadecimal TMSI everywhere.
- osmo_mi_name_buf() decodes the BCD digits from a raw MI every time, so we'd
need to pass around the raw message bytes. Also, osmo_mi_name_buf() has the
wrong signature, it should return a length like snprintf().
- osmo-bsc's extract_sub() first uses gsm48_mi_to_string() which encodes the
raw uint32_t TMSI to a string, and then calls strtoul() via
tmsi_from_string() to code those back to a raw uint32_t.
Each of the above implementations employ their own size overflow checks, each
invoke osmo_bcd2str() and implement their own TMSI osmo_load32be() handling.
Too much code dup, let's hope that each and every one is correct.
In osmo-bsc, I am now implementing MSC pooling, and need to extract NRI bits
from a TMSI Mobile Identity. Since none of the above functions are general
enough to be re-used, I found myself again copy-pasting Mobile Identity code:
locating the MI in a 24.008 message with proper size checks, decoding MI
octets.
This time I would like it to become a generally re-usable API.
Change-Id: Ic3f969e739654c1e8c387aedeeba5cce07fe2307
These utilities will be used by osmo-bsc to determine the Network Resource
Indicator seen in the TMSI, and (potentially) by osmo-msc to compose a TMSI
with a specific NRI, for osmo-bsc's load balancing between several MSCs.
Add utility functions to:
- extract an NRI value from a TMSI.
- overwrite the NRI value in a TMSI.
- limit an NRI in a (random) TMSI to a given list of ranges.
- add NRI value ranges to a list.
- remove them from a list.
- match NRI value (range) to a list.
- parse NRI values from string, for VTY.
- common VTY functionality of adding/removing NRI values from argv.
Add C tests for the above.
Why we need public API for NRI ranges: In osmo-bsc alone, we need the same NRI
API twice, 1: to manage/list NRI value ranges per-MSC, and 2: to manage/list
NULL-NRI values. If we also consider (potentially) adding NRI support to
osmo-msc, we need the same API twice again there. Hence it is useful to define
re-used API up here in libosmocore.
Related: OS#3682
Change-Id: Icb57a2dd9323c7ea11b34003eccc7e68a0247bf5
The call identifier in the ASSIGNMENT COMMAND is encoded in the wrong
endieness. 3GPP TS 48.008, section 3.2.2.105 specifies that the least
significant byte should be transmitted first, which means that the
endieness here is little endian. Lets make sure that the endieness is
correctly transmitted, regardless of the host byte order.
Change-Id: I6468e502f552f99ab54aec9d4b1c169fdc0adfb8
Related: OS#4582
At the moment we print the pointer address to identify the log lines
belonging to a specific connection. Since pointer addresses are
difficult to work with, a human readable ID should be printed instead.
e.g. "This is LAPD instance for SAPI3 on bts0/trx1/ts5/lchan3"
Change-Id: Ie6742843fff809edffcac24c4dce4edf66bc71be
Closes: OS#1938
This implements a multiplexer and de-multiplexer for the ITU-T I.460
standard. The latter covers the transmission of sub-slots of 32/16/8k
inside 64k timeslots.
Change-Id: Id522f06e73b77332b437b7a27e4966872da70eda
Fix osmo_mi_name_buf() to snprintf() into the buf in *all* cases.
osmo_mi_name_c() is implemented via osmo_mi_name_buf(), which returns
compile-time string constants in special cases. That means that
osmo_mi_name_c() does return non-allocated strings in these special cases.
The caller of functions like osmo_mi_name_c() must always be able to rely on
getting a talloced string, or run a danger of deallocating const pointers.
Change-Id: I623959f01b72642bcdd18508097c5c405c59f6f1
This implementation is taken from OsmocomBB, in particular from:
target/firmware/layer1/rfch.c
Change return type to uint16_t, because neither ARFCN, nor MAI
can be negative. Add prefix 'gsm0502_' to the function's name.
Change-Id: I8aba1578cc9d1bd89d4f5d33a6e8fedc8bea789a
Related: OS#4546
As was pointed out by pespin, some compilers may not like the
lack of spaces around the format macro constants.
Change-Id: I4b6517989030c8e3f6a1bf16c43044e4e9137f40
In Change-Id Idf2b99e9ef014eba26e3d4f0f38c2714d3a0520a we accidentially removed this
symbol, let's re-introduce it.
Change-Id: I9fbcbcc6619ef0c63d3682fc86adc80045baab02
Function gsm0808_get_cipher_reject_cause() was previously available
in private gsm0808_utils.h. In practice, the exact same code is useful
to extract Cause IE value from any of the many other BSSMAP messages
which use it.
So let's rename it to gsm0808_get_cause() and make it avilable
to everyone to use.
Change-Id: Idf2b99e9ef014eba26e3d4f0f38c2714d3a0520a
See TS 08.08 section 3.2.1.34 SAPI "n" REJECT:
1) DLCI is a TV element, not V.
2) Cause is a TLV element and we have a special function to encode it.
Change-Id: I033afe556c06427d06ac55c4f78854a45e41aae6
AMR SID update frames are protected using an 1/4 convolutional coder,
wich is similar to the one used with 6,7 kbit voice frames. Except that
there is no puncturing and the length is different.
Change-Id: Ia35ed4178a7f0d816052b7e5d6478b93a1d9744f
Related: OS#2978
Make build and external tests work with python3, so we can drop
the python2 dependency.
This should be merged shortly after osmo-python-tests was migrated to
python3, and the jenkins build slaves were (automatically) updated to
have the new osmo-python-tests installed.
Related: OS#2819
Depends: osmo-python-tests I3ffc3519bf6c22536a49dad7a966188ddad351a7
Change-Id: I84ef43f700e125c7a65f92347f12844e07e65655
This is a bit of a hack, as we want to maintain binary compatibility
without breaking existing users of libosmocore. To do so, we use the
'num_auth_vectors' field in two ways now:
* In the existing use case as part of SEND_AUTH_INFO_RESPONSE, it
indicates the number of vectors stored in the 'auth_vectors' field
* In the new use case as part of SEND_AUTH_INFO_REQUEST, it indicates
the number of vectors actually requested by the MSC/SGSN/MME.
Change-Id: Iaecc47280f8ce54f3e3a888c1cfc160735483d0f
In July 2018 in commit Ide240279240322f643e142229eb7829f538c6314 we
introduced the successor gsm0480_gen_ussd_resp_7bit(), which is also
what both libosmogsm-internal code as well as osmo-hlr have been ported
to. For some reason it wasn't marked deprecated back then.
Change-Id: Iff4c91b5b98a73d9a30aa42f6b2a1ebcc8a45343
GSUP routing was introduced when adding the E interface. Hence that was the
first realm where routing errors could occur. I did notice back then that this
message type was special: it does not convey a response to a particular message
kind -- it does not make sense, for example, to return an Updating Location
Error cause, and do that for all conceivable message types. Instead, this tells
the sender that a deeper error exists, i.e. that the desired peer is completely
gone and unreachable.
I did not foresee though that for D-GSM, there would also be arbitrary GSUP
proxy routing, and that this error is not limited to E interface semantics.
From today's point of view, adding the "_E_" in the name was a mistake.
Remove that "_E_" to yield OSMO_GSUP_MSGT_ROUTING_ERROR (with unchanged message
type discriminator), but provide a #define linking the old name
OSMO_GSUP_MSGT_E_ROUTING_ERROR to the new one.
The only visible change should be that osmo_gsup_message_type_names[] now
returns the new name without "_E_". I am not aware of any regression test
fallout from that.
Change-Id: Ic8e8bd11522d6c51ac7aaf946516cbce26bc6e1e
The calculation of the beginning of a block for TCH/F, TCH/H and FACCH
can be challenging since those channels are affected by the diagonal
interleaving of the TCH channels. However, GSM 05.02 Section 7 Table 1
of 5 specifies how the blocks are distributed over the TDMA frame
interval. Lets add a mapping function that is based on that table
Related: OS#3803
Change-Id: I3d71c66f8c401f5afbad9b1c86c24580dab9e0ce
OSMO_GSUP_SUPPORTED_RAT_TYPES_IE corresponds to the Supported RAT Types
Indicator from 3GPP TS 29.002. See 8.1.2 MAP_UPDATE_LOCATION service,
which indicates the capabilities of the MSC/VLR to the HLR.
So far, have room for eight RAT types in the gsup_msg. That is an arbitrary
random choice without any rationale.
OSMO_GSUP_CURRENT_RAT_TYPE_IE is useful to communicate the currently
used RAN / RAT type of the current subscriber during Location Updating Request.
Change-Id: I93850710ab55a605bf61b95063a69682a2899bb1
As 3GPP doesn't specify how the BSC shall communicate ETWS Primary
Notifications over Abis/RSL, we have to use a vendor-specific RSL
message for this. And in order to know if the peer supports this
feature, we introduces BTS_FEAT_ETWS_PN.
Change-Id: I89c24a81ada6627694a9632e87485a61cbd3e680
Related: OS#4046, OS#4047
The user length is the first IE *in* the fixed-length TV, make sure
cbsp_dec_write_repl() respects that.
Change-Id: I864cafac2466a89a4bd9644bc73363fff2babd03
Harald Welte
Alexander Couzens
Philipp Maier
Sylvain Munaut
Vadim Yanitskiy
Pau Espin
Oliver Smith
Daniel Willmann