If the SNS fsm isn't freed early, the SNS code will re-create a NSVC
when calling free_nsvc().
Fixes libasan heap-use-after-free.
Change-Id: If350df1d8d6dcea5715dd23b8bd1d684098cdb1f
Implement the load sharing based on modulo of the LSP. As long the gprs_ns2 doesn't
support the resource distribution function (48.016 § 4.4a) this simple
approach is good enought.
Fixes: OS#4836
Change-Id: I8c2fe5d647694886ac600470fca6ea5d5d210a85
Introduce a `ip-sns-bind BINDID` vty command within a `nse` vty object.
The ip-sns-bind defines the binds which will be used by the dynamic
configuration with IP-SNS.
This is only the first part which only uses the binds when doing a
new SNS configuration.
The outgoing add procedure will be supported in a later patch
when the SNS fsm supports outgoing procedures.
This is a behaviour change of the API and must be synchronized with
the osmo-pcu. Otherwise SNS won't work with osmo-pcu.
Related: SYS#5354
Change-Id: I9ab8092bf286e7d90e92f5702a5404425e959c84
The BSSGP layer needs to know the MTU of the NS UNIDATA payload.
The MTU can be 0 if the NSE doesn't contain any NSVC.
Every status indication will contain the mtu value.
The MTU in the status indication contains the maximum transfer
unit of a BSSGP message. From NS side the maximum SDU.
Related: OS#4889
Change-Id: I5016b295db6185ec131d83089cf6c806e34ef1b6
Allow to assign a signalling and data weight to UDP binds.
Those weights will be used when doing dynamic configuration over
IP-SNS.
This is only the first part which only uses the assigned weights
when doing a new SNS configuration.
The outgoing change weight procedure will be supported in a later patch
when the SNS fsm supports outgoing procedures.
Related: SYS#5354
Change-Id: I5133e4229377d44772a9af28628a2bc420fea34b
The SNS must know when all NS-VC have failed. Further more
there might be a corner case when the SNS configuration succeeds but
no NS-VC comes up afterwards.
Related: OS#5355
Change-Id: Ie72da9adeefe0c2850d49a9208b2d0a4556f9101
Log the NS-STATUS primitives from within the library, so we don't have
to keep related code in each and every application.
Change-Id: I368883acfc8ea76529befcd429bf8f2445a60a94
ENOSPC is used with non-volatile (disk) storage, while ENOMEM is
customarily used for RAM allocation failures.
Change-Id: Ia4c16d8278dc30c7cc69169b18428cda5272738d
Avoid code duplication between three different drivers by sharing
the "core" of the bind initialization in a new, shared ns2_bind_alloc().
Change-Id: I535fc68e94fcd695de827dd922706adc1c5a2cb7
It's always a bad idea to have an array of descriptions that's indexed
by an enum, without using named initializers. It's too easy to get
inconsistencies.
Change-Id: Id0ebd2a202a465ca0298f4245f1fb5c495235fc8
The call was only introduced as workaround for the first implementation
of vty. There is no need for this anymore. The configuration can
just add "accept-ipaccess" to the bind to allow creation of dynamic
ipaccess NSE.
Change-Id: Ie924ead6da17657f3da334068c8ada82c8845495
All public enum should have the prefix GPRS_NS2_.
API change which must be synchronized with osmo-pcu,
osmo-gbproxy, osmo-sgsn.
Change-Id: I548ff12f7277cbb7e1a630a3dc02b738ce89be72
All functions which are exposed by gprs_ns2_internal.h should not contain
the public prefix gprs_. Internal function should only contain ns2_ prefix.
Change-Id: Icecc5a918902cd10efac72bbac20780d39aab272
In preparation of checking the NSEI/NSVCI in ns2_vc_rx. It
makes the function less error prone as the *tp is always defined.
Change-Id: I3cd6ed20cdc1390075669e1d0101154c51f3997f
Let's avoid open-coding the printing of log context and rather rely on
log macros to prefix each log line with the relevant context. This
helps log readability, log post processing whether by grep or more
sophisticated tools.
Change-Id: I946c0e77686d91efc5afb62031e1ac1033a9a586
Right now we end up in situations where only a NS-VC for data (BVCI != 0)
becomes unblocked, but the BSSGP and/or user application code is
notified that the NSE has recovered.
In the case of osmo-gbproxy, this will trigger a BVC-RESET on the
BVCI=0, but that obviously only works if the sig_weight > 0...
Closes: OS#4956
Change-Id: I933ee3969c052394d61ec6cf8c7c21d17957d9ab
The transfer cap call in ns2_prim_status_ind() asserts if
NSE is in an invalid state (nse is either alive or has NSVCS).
Change-Id: I535b3e5dd7240d19dd685652173775b250f5cc2d
When receiving a NS Reset over an unknown NSVC the NS code would create
a dynamic NSE. If the NSEI or NSVCI is already configured to a
persistant NSE/NSVC the packet should be ignored.
Related: SYS#5208
Change-Id: I855911e7d364f2e5b08ea05857747aa63fcf1cd3
Prevent memory corruption or segfaults by asserting that NSE and bind
link layer match. A mismatch should never happen and might cause the
bind to access invalid memory when sending because nsvc->priv doesn't
match what it expects.
Change-Id: I7ca4cd1c5dac8b5e44ffc4825b9373b2d04911ab
Related: OS#4948
For frame relay the traffic will be even distributed across
all NS-VCs. Do not differentiate between signalling and
data traffic.
Change-Id: I6c060941db335a7a6a555ac8d1b9269fa8fb2023
When reject_stats_msg() fails the code can't do anything about it.
Stick to the original failure code and log it
Change-Id: I105363957e59c41a68835b7a9830c048dba73e93
According to 3GPP Size and Config procedure can
have retries in case the timeout of the procedure runs out.
Change-Id: I00e9023a6e7adc6ad48f4016fcaef189ac8b353e
The IP-SNS requires at least one initial remote address of the SGSN.
However it should be multiple initial remote address instead of a single
in case the interface might fail.
Rework the SNS to support multiple initial remote addresses.
Change-Id: I71cdbfb53e361e6112fed5e2712236d797ef3ab2
Every bind will have a unique name. Add a name argument
to all bind creating functions and require them to be unique.
This is an API break but there wasn't yet a release with NS2.
Change-Id: I8f1d66b7b3b12da12db8b5e6bd08c1beff085b3e
The allocation of the SNS fsm can be done in create_nse
because the dialect is now known at that time.
Change-Id: I64e1f3dcc63d38e65bb486c9ac08d4032b7ad222
A NS dialect describes how the NS Entity interacts with
different virtual circuits. E.g. ipaccess use reset/block on udp
and is a dynamic connection.
A single NS Entity can only support one dialect. This can be later
used to protect a NS Entity against dynamic NS virtual circuits of a
different type.
It further allows a bind to support multiple dialects at the same time.
Change-Id: Ia118bb6f994845d84db09de7a94856f5ca573404
With TLVP_PRESENT we only check if a given TLV/IE is present,
but don't verify that it's length matches our expectation. This can
lead to out-of-bounds reads, so let's always use TLVP_PRES_LEN.
Change-Id: I4c438bc82ea6a48243db568f96a234adf784dc0b
NSVC filtering was only implemented on sending messages, this also adds
log_set_context() calls to ns2_recv_vc()
Filtering by NSE is implemented similar to NSVC.
Change-Id: I63c0e85f82f5d08c5a6f535da94b8648498439d2
Related: SYS#5232
Even it was in theory possible to mix NS-VC ll types within
a NSE. This is an unrealistic configuration.
Further more to select the correct load sharing mechanism
the NSE must know the correct link layer.
Change-Id: I18dfd40a2429cd61b7c4a3dad5f226c64296f7d8