Replace osmo_gsup_get_err_msg_type() with a wrapper to
OSMO_GSUP_TO_MSGT_ERROR(). This macro assumes, that all error messages
are (request message | 0x000001). Add a big comment header for
osmo_gsup_message_type, describing this already implicitly followed rule
and therefore making it explicit.
With this change, we don't need to maintain the request -> error message
mapping in osmo_gsup_get_err_msg_type() anymore.
Related: Iec1b4ce4b7d8eb157406f006e1c4241e8fba2cd6 (osmo-gsm-manuals)
Change-Id: I46d9f2327791978710e2f90b4d28a3761d723d8f
During testing of the upcoming tdef API, it became apparent that passing very
large timeout values to osmo_fsm_inst_state_chg() wraps back in the number
range, and might actually result in effectively very short timeouts instead.
Since time_t's range is not well defined across platforms, use a reasonable
maximum value of signed 32 bit integer. Hence this will be safe at least on
systems with an int32_t for struct timeval.tv_sec and larger.
Clamp the osmo_fsm_inst_state_chg() timeout_secs argument to a maximum of
0x7fffffff, which amounts to just above 68 years:
float(0x7fffffff) / (60. * 60 * 24 * 365.25) = 68.04965038532715
(In upcoming patch Ibd6b1ed7f1bd6e1f2e0fde53352055a4468f23e5, this can be
verified to work by invoking tdef_test manually with a cmdline argument passed
to enable the range check.)
Change-Id: I35ec4654467b1d6040c8aa215049766089e5e64a
Before this patch, if timeout_secs == 0 was passed to
osmo_fsm_inst_state_chg(), the previous T value remained set in the
osmo_fsm_inst->T.
For example:
osmo_fsm_inst_state_chg(fi, ST_X, 23, 42);
// timer == 23 seconds; fi->T == 42
osmo_fsm_inst_state_chg(fi, ST_Y, 0, 0);
// no timer; fi->T == 42!
Instead, always set to the T value passed to osmo_fsm_inst_state_chg().
Adjust osmo_fsm_inst_state_chg() API doc; need to rephrase to accurately
describe the otherwise unchanged behaviour independently from T.
Verify in fsm_test.c.
Rationale: it is confusing to have a T number remaining from some past state,
especially since the user explicitly passed a T number to
osmo_fsm_inst_state_chg(). (Usually we are passing timeout_secs=0, T=0).
I first thought this behavior was introduced with
osmo_fsm_inst_state_chg_keep_timer(), but in fact osmo_fsm_inst_state_chg()
behaved this way from the start.
This shows up in the C test for the upcoming tdef API, where the test result
printout was showing some past T value sticking around after FSM state
transitions. After this patch, there will be no such confusion.
Change-Id: I65c7c262674a1bc5f37faeca6aa0320ab0174f3c
osmo-bsc and osmo-msc implement identical Classmark structures. It makes sense
to define once near the gsm48 protocol definitions.
Also move along some generic Classmark API from osmo-msc.
Change-Id: Ifd27bab0380f7ad0c44c719aa6c8bd62cf7b034c
Add osmo_hexdump_buf() as an all-purpose hexdump function, which all other
osmo_hexdump_*() implementations now call. It absorbs the static
_osmo_hexdump(). Add tests for osmo_hexdump_buf().
Rationale: recently during patch review, a situation came up where two hexdumps
in a single printf would have been useful. Now I've faced a similar situation
again, in ongoing development. So I decided it is time to provide this API.
The traditional osmo_hexdump() API returns a non-const char*, which should
probably have been a const instead. Particularly this new function may return a
string constant "" if the buf is NULL or empty, so return const char*. That is
why the older implementations calling osmo_hexdump_buf() separately return the
buffer instead of the const return value directly.
Change-Id: I590595567b218b24e53c9eb1fd8736c0324d371d
Add
* osmo_lai_cmp() (to use in gsm0808_cell_id_u_matches())
* osmo_cgi_cmp() (to use in gsm0808_cell_id_u_matches())
* gsm0808_cell_id_u_match() (to re-use for single IDs and lists)
* gsm0808_cell_ids_match()
* gsm0808_cell_id_matches_list()
* Unit tests in gsm0808_test.c
Rationale:
For inter-BSC handover, it is interesting to find matches between *differing*
Cell Identity kinds. For example, if a cell as CGI 23-42-3-5, and a HO for
LAC-CI 3-5 should be handled, we need to see the match.
This is most interesting for osmo-msc, i.e. to direct the BSSMAP Handover
Request towards the correct BSC or MSC.
It is also interesting for osmo-bsc's VTY interface, to be able to manage
cells' neighbors and to trigger manual handovers by various Cell Identity
handles, as the user would expect them.
Change-Id: I5535f0d149c2173294538df75764dd181b023312
gcc-8.2 is printing the following warning, which is an error
when used -Werror like our --enable-werror:
In file included from gprs_bssgp.c:34:
In function ‘tl16v_put’,
inlined from ‘tvlv_put.part.3’ at ../../include/osmocom/gsm/tlv.h:156:9,
inlined from ‘tvlv_put’ at ../../include/osmocom/gsm/tlv.h:147:24,
inlined from ‘msgb_tvlv_push’ at ../../include/osmocom/gsm/tlv.h:386:2,
inlined from ‘bssgp_tx_dl_ud’ at gprs_bssgp.c:1162:4:
../../include/osmocom/gsm/tlv.h:131:2: error: ‘memcpy’ forming offset [12, 130] is out of the bounds [0, 11] of object ‘mi’ with type ‘uint8_t[11]’ {aka ‘unsigned char[11]’} [-Werror=array-bounds]
memcpy(buf, val, len);
Where "130" seems to be the maximum value of uint8_t, shifted right one +
2. But even as we use strnlen() with "16" as maximum upper bound, gcc
still believes there's a way that the return value of gsm48_generate_mid_from_imsi()
could be 130. In fact, even the newly-added OSMO_ASSERT() inside
gsm48_generate_mid() doesn't help and gcc still insists there is a problem :(
Change-Id: I0a06daa19b7b5b5badbb8b3d81a54c45b88a60ec
The longest BCd-digit type identity is the IMEISV with 16, so there's
no point in trying to parse up to 255 decimal digits, which will do
nothing but to overflow the caller-provided output buffer.
Let's also clearly define the required minimum size of the output
buffer and add a reltead #define for it.
Change-Id: Ic8488bc7f77dc9182e372741b88f0f06100dddc9
This resolves an issue introduced in 84fb5bb6a0
when msgb_wrap_with_TL() was introduced as an inline function with
*exactly the same name* as in osmo-msc.git and openbsc.git. We *NEVER*
do something like this. Functions moved from applications to library
*MUST* always be renamed. This has been the case for almost a decade
now.
With this subsequent change we make sure the libosmocore function
has a different name and doesn't clash. After this commit, old
openbsc.git and osmo-bsc.git should again build fine.
Change-Id: If1e851ac605c8d2fde3da565b0bd674ea6350c2e
Most of the time we'll have GCR filled anyway so it make sense to have
it as static parameter instead of a pointer to separately allocated
structure. Update tests to cover both static and dynamic osmo_lcls
allocation variants.
Change-Id: I905c36d8455911c68c30bc429379b7313dd46aea
* add gsm0808_create_ass_compl2() with additional gsm0808_lcls_status
parameter and make gsm0808_create_ass_compl() into trivial wrapper
around it
* update tests accordingly
Change-Id: I547c6b8707123aa8c1ef636db88908df112d90a4
Related: OS#2487
The function msgb_sgsap_name_put() assignes the return code of
osmo_apn_from_str() directly to len. Len is an uint8_t and the return
code an int. If osmo_apn_from_str() returns -1. Len would become 0xFF
causing a buffer overrun with msgb_tlv_put. Lets use the proper type to
catch the return code and check it before using it as length.
Change-Id: Ic0bc5114eee47bdcf2300a6e4b0df473d3d1903a
Fixes: CID#190405
Fixes: CID#190401
Related: OS#3615
The function osmo_sock_get_name_buf() can be used to write a string
representation to a user provided memory. Unfortunately the proper
length for the user provided memory is not obvious. To make using
osmo_sock_get_name_buf() more practical, add a define constant that
defines the length of the required memory. Also use this define in
socket.c.
Change-Id: If8be8c2c0d4935da17ab13b2c2127b719ceefbcc
Prepare handling multiple CM Service Requests in osmo-msc: an enum is more
clear than an int and #defines for passing around and count CM Service types.
Change-Id: I9c2a7adc45ab7a1a7519168e965e7d805e1481ff
Verify 14 digit and 15 digit IMEI strings. OsmoHLR will use the 14
digit version to check IMEIs before writing them to the DB.
Place the Luhn checksum code in a dedicated osmo_luhn() function, so
it can be used elsewhere.
Related: OS#2541
Change-Id: Id2d2a3a93b033bafc74c62e15297034bf4aafe61
As part of fixing issue OS#3075, we want to migrate support
for encoding system information from osmo-bsc to libosmocore.
This change ports osmo-bsc code for encoding SI rest octets.
The conversion was a bit tricky in some places because some
functions receive a 'struct gsm_bts' parameter in osmo-bsc.
In this libosmocore version, such functions expect parameters
which correspond to the individual fields of 'struct gsm_bts'
which are used by these functions.
Several structs from osmo-bsc's system_information.h are now
also declared in libosmocore headers, with an added osmo_ prefix
to avoid collisions with existing definitions in osmo-bsc.
Some helpers were ported from osmo-bsc's system_information.c
to libosmocore's gsm48_rest_octets.c. Contrary to osmo-bsc's
implementation they are now only visible within this file.
Unfortunately, this code ported from osmo-bsc lacks unit tests.
Change-Id: I47888965ab11bba1186c21987f1365c9270abeab
Related: OS#3075
As part of fixing issue OS#3075, we want to migrate support
for encoding system information from osmo-bsc to libosmocore.
This change ports one of the prerequisites for doing so:
osmo-bsc code for range-encoding ARFCNs, including tests.
An osmo_gsm48_ prefix has been prepended to public symbols in
order to avoid clashes with existing symbols in osmo-bsc code.
Change-Id: Ia220764fba451be5e975ae7c5eefb1a25ac2bf2c
Related: OS#3075
Since osmo_hexdump() use static buffers we can't re-use pointers to it
after subsequent osmo_hexdump() calls. Let's print data used for
comparison directly instead.
Change-Id: I24dc3fad6f64ef788da9b7d790f9d5f689190c42
We have gsm48_mi_to_string() and osmo_bcd2str(), but still lack a function that
conveniently prints both MI type and value in one function call.
Related: http://people.osmocom.org/neels/mi_mi_mi.jpg
Change-Id: I7798c3ef983c2e333b2b9cbffef6f366f370bd81
Previously it could encode both incorrect values as well as incorrect
message. Let's fix this by explicitly checking for invalid values and
ensuring that at least one of the parameters is valid.
This function have no external or internal users so it's better to fix
type signature as well to match the rest of gsm0808_create_lcls_*().
Change-Id: I7b33a771acbd391c5f9a494d6450edb18511433f
Disable GnuTLS fallback if sufficient glibc version detected. Previously
GnuTLS fallback was used regardless of getrandom() availability in
glibc. Fix this by automatically disabling it when not needed. This does
not affect the ability to manually disable it unconditionally.
Change-Id: Ibe2117afc050261668a4d5a590044aabcd08aefe
* use macro for version check
* report glibc version upon random.h detection
* comment where various #endif belongs to
* explicitly check for embedded build (our target toolchain don't use
libc so there's no point in checking its version)
Change-Id: Ia54f0b7a861f955be65bb0cf06eb10af9372d062
In the MSC, we have RAN types GERAN_A and UTRAN_IU, now we need a similar enum
in osmo-hlr's GSUP client.
Naming: in the MAP specifications, the RAN type is mostly called RAT type,
(Radio Access Network vs. Radio Access Technology?). Since GSUP is more about
MAP messages, I'm calling the enum osmo_rat_type.
Rationale: osmo-msc and osmo-sgsn want to tell the osmo-hlr which RAT a
subscriber is calling on. A subsequent patch will extend the GSUP protocol and
add a RAT types IE.
Change-Id: I659687aef7a4d67ca372a39fef31dee07aed7631
According to the man page, vsnprintf() returns:
- a negative value in case of error;
- the number of characters written (excluding '\0');
- the number of characters which *would have been written*
if enough space had been available (excluding '\0').
We need to detect if the output was truncated, and properly
limit the amount of bytes to be reserved within a msgb.
Change-Id: Ifa822edf900ed925ba935c54a28c797c4657358a
In 3GPP TS 48.008 the Global Call Reference IE is only used in HANDOVER
REQUEST (§3.2.1.8) and ASSIGNMENT REQUEST (§3.2.1.1) messages which
also include LCLS Config and CSC parameters. Hence, there's no point in
using GCR encode/decode functions alone.
Introduce gsm0808_dec_lcls() and gsm0808_enc_lcls() as trivial wrappers
on top of GCR enc/dec routines which are made static. Adjust tests
accordingly. Test output intentionally left unchanged.
Change-Id: Icfbb2404e1a1d500243e2071173299b557369335
In 99ae401e49 we introduced the ability
to specify the TCP port to which the VTY should bind. However, the VTY
dcumentation wasn't extended accordingly, causing virtually all master
build jobs to fail.
Change-Id: I54fb0ca0d3a884a64a349b22de70f3d9bd1a6d54
Extend the vty_bind_cmd VTY command to allow to optionally specify
a port in addition to the IPv4 address.
Introduce telnet_init_default to relieve client code from having
to query the bind IPv4 address (and now the TCP port). Instead a
client only needs to pass the default TCP port to use.
Client code should use it like:
int rc = telnet_init_default(ctx, priv, OSMO_VTY_PORT_SGSN);
Change-Id: Id5fb2faaf4311bd7284ee870526a6f87b7e260f3
Implement necessary messages for Procedure Check_IMEI_VLR (TS 23.018
Chapter 7.1.2.9). This lets the VLR ask the EIR to check if an IMEI
is valid. In the Osmocom stack, we don't have an EIR and this request
will be handled by the HLR. We will be able to store the IMEI in the
HLR as side-effect (OS#2541).
This is roughly based on TS 29.002 8.7.1 MAP_CHECK_IMEI service, but
only implements the bare minimum required IEs (imei and imei_result).
Related: OS#3733
Change-Id: I085819df0ea7f3bfeb0cabebb5fd1942a23c6155
Basically, I am applying code review that I would have given had I not been on
vacation when the last osmo_sock_get_name* stuff was merged.
osmo_sock_get_name2() is so far a static internal function. However, it is
nothing like osmo_sock_get_name(), so instead rename it to
osmo_sock_get_ip_and_port(). Also make it public API, no need to hide it. I'm
adding an "and" in the name to hopefully clarify: "ip_port" vs. "ip_and_port"
-- there already are _get_X_ip_port() functions that only return the port
string, despite "ip" in the name.
Add new public osmo_sock_get_name2(), which is like osmo_sock_get_name(),
except it uses a static string instead of talloc, and omits the braces. This
is most convenient for log statement formats, avoiding dyn allocations.
Add new osmo_sock_get_name_buf(), which is like osmo_sock_get_name2() but
writes to a caller provided char buffer.
Use osmo_sock_get_name_buf() in the implementation of osmo_sock_get_name(),
but use another (non-static) local string buffer, because adding braces is too
complex without talloc_snprintf().
Rationale:
I want to improve the logging of socket errors, e.g. change
DLMGCP ERROR Failed to read: 111/Connection refused (mgcp_client.c:720)
to
DLMGCP ERROR Failed to read: r=10.0.99.2:2427<->l=10.0.99.2:2728: 111='Connection refused' (mgcp_client.c:721)
but it is just not handy to compose logging with the current API:
- osmo_sock_get_name() requires a talloc_free().
- all the others require output buffers.
- the only way to conveniently compose a logging string and,
- notably, the only trivial way to skip the string composition if the logging
level is currently muted, is to have a function that returns a static string:
the new osmo_sock_get_name2().
- (I think the osmo_sock_get_{local,remote}_* convenience wrappers should never
have been added, because they encourage the caller to invoke the same code
twice, for IP addr and port, and throw away one half each time.)
Related: Iae728192f499330d16836d9435648f6b8ed213b6 (osmo-mgw)
Change-Id: I8ad89ac447c9c582742e70d082072bdd40a5a398
According to 3GPP TS 29.002, section 12.4, MAP-READY-FOR-SM is
used between the MSC and VLR as well as between the VLR and the
HLR to indicate that a subscriber has memory available for SMS.
This change replicates this service in GSUP as READY_FOR_SM_*.
The only mandatory IE for this service (excluding Invoke ID) is
'Alert Reason' that is replicated by OSMO_GSUP_SM_ALERT_RSN_IE.
Change-Id: Ic37f3b2114b8095cfce22977e67133b9103942e3
Related Change-Id: (docs) I549b6c8840a1e86caac09e77fb8bc5042d939e62
Related Change-Id: (TTCN) If2256607527ecfcb10285583332fb8b0515d7c78
Related: OS#3587
According to 3GPP TS 29.002, there are two services:
- MAP-MO-FORWARD-SHORT-MESSAGE (see 12.2),
- MAP-MT-FORWARD-SHORT-MESSAGE (see 12.9),
which are used to forward MO/MT short messages.
This change replicates both services as GSUP messages:
- OSMO_GSUP_MSGT_MO_FORWARD_SM_*,
- OSMO_GSUP_MSGT_MT_FORWARD_SM_*.
Please note, that only the 'must-have' IEs are introduced
by this change, in particular the following:
- OSMO_GSUP_SM_RP_MR_IE (see note below),
- OSMO_GSUP_SM_RP_DA_IE (see 7.6.8.1),
- OSMO_GSUP_SM_RP_OA_IE (see 7.6.8.2),
- OSMO_GSUP_SM_RP_UI_IE (see 7.6.8.4),
- OSMO_GSUP_SM_RP_MMS_IE (see 7.6.8.7),
- OSMO_GSUP_SM_RP_CAUSE_IE (see GSM TS 04.11, 8.2.5.4),
where both SM_RP_DA and SM_RP_OA IEs basically contain
a single nested TV of the following format:
- T: identity type (see 'osmo_gsup_sms_sm_rp_oda_t'),
- V: encoded identity itself (optional).
According to GSM TS 04.11, every single message on the SM-RL has
an unique message reference (see 8.2.3), that is used to link
an RP-ACK or RP-ERROR message to the associated (preceding)
RP-DATA or RP-SMMA message transfer attempt.
In case of TCAP/MAP, this message reference is being mapped to the
Invoke ID. But since GSUP has no 'Invoke ID' IE, and it is not
required for other applications (other than SMS), this change
introduces a special 'SM_RP_MR' IE that doesn't exist in MAP.
Change-Id: Ibe325c64ae2d6c626b232533bb4cbc65fc2b5d71
Related Change-Id: (docs) Ie0150756c33c1352bc4eb49421824542c711175c
Related Change-Id: (TTCN) Ibf49474a81235096c032ea21f217170f523bd94e
Related: OS#3587
* add functions to encode Global Call. Ref. from TS 29.205 as 3GPP TS
48.008 §3.2.2.115 information element
* add corresponding tests
Change-Id: I82ce0207dc8de50689a8806c6471ad7fbae6219d
Add functions to encode and decode Global Call Reference as per
3GPP TS 29.205 Table B 2.1.9.1 add corresponding tests.
Change-Id: Iee95aa4e5c056645b6cb5667e4a067097d52dfbf
Related: OS#2487
It's often handy to compare certain msgb layer to a given array and
print the position where they differ. Add simple pretty-printer and
corresponding L* wrappers.
Change-Id: I3bc95f2f5ab6e3f4b502647fb3e0aaaf1f7c4cf5
All successful cases already return from the switch(), so simply handle all
errors below it by returning an empty string (if there is enough string
buffer).
Change-Id: I709ac3b9efb7b4258d8660715b10312e11b9b571
For MI encoding, see 3GPP TS 24.008, 10.5.1.4 Mobile Identity. The 'odd' flag
indicates whether the last BCD nibble is used. Of course that flag should be
made sure to reflect the actual length.
Change-Id: Id6e695ebf9f86b295eaa7e2c6228989256f37e68
By using osmo_bcd2str(), ensure that the resulting string is always nul
terminated, and always return strlen()+1 whether truncated or not.
Still keep up the previous return value style, even if that isn't consistent at
all.
The difference between IMSI/IMEI and TMSI return values remains and is not part
of this patch.
Change-Id: I1b51b72a721e1cc9d69796b804ebda741ff0f36b
Add a standalone bcd-to-string conversion function with generic parameters.
Add a regression test in utils_test.c.
So far there is no single universal implementation that converts a BCD to a
string. I could only find gsm48_mi_to_string(), which also interprets
surrounding bytes, MI type and TMSI as non-BCD value.
The idea is to use this function from gsm48_mi_to_string() and similar
implementations in subsequent commits.
Root cause: in osmo-msc, I want to have an alternative MI-to-string function
for composing an FSM name, which needs the BCD part of gsm48_mi_to_string() but
not the TMSI part.
Change-Id: I86b09d37ceef33331c1a56046a5443127d6c6be0
At the moment the all gsm0808 cause codes are encoded directly using the
tlv API directly to put a one byte TLV field. This works ok for most
situations where the cause code consists of a single byte. However,
gsm0808 specifies a two byte cause code model where cause codes may be
extended up to two bytes. Instead of implementing the encoding over and
over and again, let's rather have an encoder function we can call.
- Add an encoder function that can generate single byte and extended
cause codeds and makes the length decision automatically.
- Use only this function to append cause codes
Change-Id: I71d58fad89502a43532f60717ca022c15c73f8bb
We already have some GSM29118 related definitions and functions in
libosmocore. Lets also add some functions to generate GSM29118 messages
(similar to those we have for GSM0808).
Change-Id: Ic87f8a771b87b52215d0a7451b67794557b80b8a
Related: OS#3615
It's similar to osmo_sockaddr_to_str_and_uint() but does not require odd
typecasting for AF_INET case. Make osmo_sockaddr_to_str_and_uint() into
wrapper around new function and make sure to check for address family
before typecasting. Also use proper return type.
Change-Id: Ie384483124d407a960ab6732e6a7fd90554389d2
Since we have library-internal categories we don't have to force
application to supply its own categories. This is especially useful for
testing code inside libosmocore which only use internal categories
anyway.
Change-Id: I42159780b57684bff225789f036f28a4b25fc7b8
We always use id = 0 when sending TRAP messages. Let's make this more
obvious by introducing appropriate define.
Change-Id: I33d7d4c6a1885a75a85d6f2f017430e0860b4126
We currently have no generator function that can generate BSSMAP
HANDOVER PERFORMED messages. Lets add function for this.
Change-Id: I825106858bd89afc9837811b8fed2e8accc82441
Related: OS#3645
* add spec reference
* remove LCLS note: CI parameter is optional but have nothing to do with
LCLS
It's pretty hard to decipher from the spec what CI is useful for and we
have not used it anyway so let's just keep it as "Optional" for now.
Change-Id: I5552732afcec48047d993ae6ffb73a3e5d7c9202
ARFCNs are values in well defined ranges. Until this patch, ARFCNs not
belonging to any band were blindly assigned to DCS1800 by
gsm_arfcn2band, causing unnoticed bugs and misconfigurations in
osmo-bsc.
Previous API gsm_arfcn2band cannot accomodate this kind of check easily,
so let's deprecate it to tell people to use a new API gsm_arfcn2band_rc
which performs this kind of checks and allows callers to log failures,
misconfigurations, etc.
At the same time, modify implementation of gsm_arfcn2band to abort if an
invalid ARFCN is passed, this way users of this API can notice they are
passing wrong data to it that most probably will produce unexpected
results.
Related: OS#3063
Change-Id: I780d452dcebce385469e32ef2fd844df6033393a
Since commit 797558ea17 we send the
NS_UNBLOCK_ACK message before dispatching the NS_UNBLOCK signal,
instead of afterwards.
Add comments which explain the intended order of events.
Suggested-by: Pau
Related: OS#2388
Change-Id: I4b93853c952a97302f8afc14f462f22c3e487564
In gprs_ns_process_msg(), we were dispatching the S_NS_UNBLOCK
signal before sending out the NS_POUT_UNBLOCK_ACK message.
Signal handlers might send messages to the other side, assuming
that NS is now unblocked. However, since such messages will arrive
before the UNBLOCK_ACK message the receiver might discard them.
This problem has been observed with our TTCN3 BSSGP_Emulation
as a peer to osmo-pcu.
This patch makes TTCN3 PCU TC_paging() test pass regardless of
whether the test or osmo-pcu is started first. Before this patch,
this test would only pass if the test was started before osmo-pcu.
A remaining problem is that the test does not yet keep passing
reliably unless osmo-pcu is restarted between test runs.
Change-Id: I3af54a14bb6bcfa167c9a9d9f67835e7f5b9f1bb
Related: OS#2890
Related: OS#2388
* add function to generate cipher mode reject with extended (2-byte)
Cause IE
* add function to get (extended) Cause value
* add corresponding (extended cause) test
* update existing (non-extended cause) test
* use enum as a parameter for existing non-extended version to make
interface more unified
Change-Id: Id5509b94a18180a44f45300caaa02b843c166fa3
Related: OS#3187
The msgb_wrap_with_TL() is generally useful so it make sense to make it
public to facilitate code re-use.
Other helpers can be implemented as trivial wrappers over existing tlv.h
functions. Update headers and code accordingly.
Change-Id: I37e91d031fba28cf1c6735b8069b0265746f55e6
Add values indicating that LCLS control/config/status value has not been
received yet.
Change-Id: I52dc6a52f5ee043ed2c1625ffecfd495e3c746b1
Related: OS#2487
* add Class definitions
* add helper to check for extended bit
* add helper to get Cause's Class
* use enum in gsm0808_cause_name() and gsm0808_create_cipher_reject() to
avoid confusion between class and cause
* update gsm0808_create_cipher_reject() comments
Change-Id: I31b31dfc22eb4b6b07089e1255246ac458125340
Related: OS#3187
The api documentation of osmo_fsm_state_name() refers to an FSM
instance, but it really means the state of an FSM.
Change-Id: I88ddd6048426d380c49170e66f57b3843398c046
The value strings for the SGSAP IEI are missing, lets add a set of value
strings and a function to retrieve them.
Change-Id: I2787303174f74ffba86675bce2c12f680d8ea708
Related: OS#3615
Use INET6_ADDRSTRLEN (46) instead of 64 for IP address buffers, and 6
instead of 16 for port buffers (the highest possible port number is
65535).
Change-Id: Ia25e2f3277ad2f60df31c08d12f42c1e6d2a14a6
The API documentation lacks the the description for the last parameter,
lets add a description for it.
Change-Id: Ibcd25d3a7ddd7075eb15daff6dba42236d14d945
* add note about (yet) unsupported standard feature
* use enum constant instead of hex value
Change-Id: I5cc5fc1ae8d5474dbc8d3385a493adf6420a3c98
Related: OS#3187
The function that generates the clear command takes a parameter
"reason", which is the cause code. Lets give it the name "cause" to have
a coherent naming scheme that matches the other functions and the 3gpp
specs.
Change-Id: I7b6c15e8fa8db13deef5041095944ca1c58fb99f
The api documentation names a parametery by a different name than it is
listed in the parameter list of the function. Lets make the apidoc
coherent.
Change-Id: Id21ed1e920fb64522a734f206efbe2871ec05b06
Show each rate counter group's index in the output of the
'show rate-counters' command, to provide some way of telling
apart distinct instances of the same rate counter group.
This is not a very user-friendly UI because these indices are
generated internally by libosmocore and/or applications, so
users cannot easily assign meaning to these indices. However,
the current rate counter implementation doesn't allow for more.
Change-Id: Ieb151239407e4b2f8859fefec8d0670f5ddf908a
Related: OS#3674
When vty_out_rate_ctr_group_fmt() prints the description of a
counter group, it assumes this description should appear at
the beginning of a line. However, the caller might be printing
counters in an indented context. So just let the caller worry
about printing the group title if necessary (there is currently
only one known caller, which is updated in this commit).
Note that printing of the group title was an undocumented feature.
Change-Id: I2c55cb54e8b7a7c8c6cf72f22287083767ed0201
Related: OS#2660
Return only the IP or port of either the local or remote connection,
not the whole set of IP and port of both the local and remote
connection like osmo_sock_get_name() does it. This is needed for
OS#2841, where we only want to print the remote IP.
Related: OS#2841
Change-Id: I6803c204771c59a2002bc6a0e6b79c83c35f87e1
When sending a statsd metric we need to specify a type which can be a
"g"auge, "c"ounter, "t"imer, "h"istogram, and "m"eter.
We used to just pass the stat_item unit into this field, but that is the
unit of the metric (Seconds for a timer, % for utilization, ...).
Change the type field so stat_items are sent as "g"auges. Note that
negative values don't seem to be supported by statsd.
Change-Id: Ia16270d36c9a14521594de4b99a48c83e4ac07d4
Adjust wording so telnet command can be directly copy-pasted from the log to access
the interface without the need for further editing.
Change-Id: I1876447f9285adcd1b09937a6121afabd0b32e52
Missing (unset) type of to be encoded message is not a memory
allocation failure (-ENOMEM), this is definitely a mistake.
Change-Id: Ibbac18e2b68b765c17c2bc959c4c085037953a7f
3GPP_TS_48.008, 3.2.2.103 Speech Codec List states the following:
"The length indicator (octet 2) is a binary number indicating the
absolute length of the contents after the length indicator.
The length depends on the number and type of Speech Codec Elements
to be included. The minimum length of one Speech Codec Element is 1
octet and the maximum length is 3 octets. The maximum number of
Speech Codec Elements within the Speech Codec List is not defined."
This clearly refers only to the length of a single speech codec
element but not on the overall list. So speech codec lists with
length 0 are indeed permitted by the spec.
- Remove the assertion that checks on zero length speech codec
lists.
Change-Id: I1eb1f4466b98bdd26d765b0e4cc690b5e89e9dd6
Related: OS#3657
In ctrl_handle_msg(), check for IPACCESS protocol messages and respond
to such messages in the same way as ipa_ccm_rcvmsg_base() does. This will
allow the TTCN3 IPA "chopped ping" test to pass on control interfaces.
Change-Id: I9d7137c830981ccad03806b30b776e2b1f1b4699
Related: OS#2010
If we cannot bind the listening socket, reset related fields in
the osmo fd structure to NULL again. Otherwise our caller might
eventually try to use an uninitialized osmo fd.
Change-Id: Ia953b2eff54cac0bd980944291f75db14df09a34
Related: OS#3643
We must explicitly check the return value of osmo_log_vty2tgt(), or may run
into a segfault. I wasn't aware of this and introduced numerous such cases in
I36f17c131cc70ce5a1aef62fd9693097de230cd4.
Reproduce: on the VTY, do not issue 'logging enable', invoke 'logging level
force-all LEVEL' first.
Show in logging_vty_test.vty that this situation is now again amended by
telling the user that logging was not enabled.
Related: OS#3611
Change-Id: Id11702d1801d6654ca5e5a51b597a0d802e2e8dd
The unix(7) man page recommends that sun_path is NUL-terminated
when struct sockaddr_un is passed to a bind() or connect() call.
Non-NUL-terminated paths only need to be dealt with at the
receiving end of a UNIX domain socket.
Commit 896ff6d erroneously assumed otherwise.
This commit almost reverts 896ff6d: It only leaves the added
osmo_strlcpy() overflow check in place.
Change-Id: I6c4ac6b0a0eef4842beae4107f6f09f6cd29172a
Fixes: 896ff6db16
Related: OS#2673
We want to have well-formed config files that print exactly one space
per VTY/config node level, and not two.
Change-Id: Ia75c7067284ea225cffe13ca71bad05a7747ae66
Add a function to convert S0-S15 bits to struct gsm48_multi_rate_conf,
which hold the codec settings for AMR.
Change-Id: I973736273c236eee84decf15868190e339c3fed4
Related: OS#3548
During 'show online help', the XML vty node dump, omit all commands marked
HIDDEN.
These commands were already hidden from the VTY reference prior to commit
I1f18e0e41da4772d092d71261b9e489dc1598923, because of broken/confusing bit and
boolean logic mixup. After that commit, HIDDEN commands end up in the doc. So
practically, this patch here brings back the status quo of before above commit,
even though the previous code clearly "intended" to list HIDDEN commands in the
reference but failed to have that effect.
AFAICT the complete list of commands currently hidden is:
* osmo-bsc: bts/"training_sequence_code <0-7>",
* osmo-bsc: ts/"phys_chan_config PCHAN" for uppercase pchans;
* osmo-bts: bts/"rtp bind-ip A.B.C.D" which actually says
vty_out(vty, "%% rtp bind-ip is now deprecated%s", VTY_NEWLINE);
* osmo-sgsn: 'reset sgsn state' used for SGSN testing.
Note that the osmo-sgsn build was broken by including hidden commands in the
vty reference, since one of its hidden commands had missing doc strings and
made osmotestconfig.py signal failure. This would fix that from the
hide-hidden-commands angle, and so would osmo-sgsn commit
I8b6e8615e409266910f2f76a10ced9ab33e4de91 from the fix-the-doc-strings angle.
Change-Id: I92c3c66ff69c186234276c64478d6342e061d25e
If a command is both hidden and deprecated, still don't show it for the 'list'
command.
We currently have no such nodes, as it seems, though.
Related: OS#3584
Change-Id: I07ec15cab057a3e09064e0420a69121ee8eb4253
In vty_dump_nodes(), make sure the bitwise & is evaluated first.
For the deprecation flag (0x1), the practical effect is most likely identical,
assuming that the boolean ! operator flips the first bit, so I expect no
visible functional difference. It still was confusing and wrong to look at.
Related: OS#3584
Change-Id: I1f18e0e41da4772d092d71261b9e489dc1598923
parameter cfg in gsm0808_sc_cfg_from_gsm48_mr_cfg() is used read only.
Lets add a const to make this clear to the compiler.
Change-Id: I31e8d273b070b0afc446a298299d4f502d6c396b
Add a function to convert struct gsm48_multi_rate_conf, which holds the
codec settings for AMR, to S0-S15 bit representation as defined in
3GPP TS 48.008 3.2.2.49
This resurrects change-id I4e656731b16621736c7a2f4e64d9ce63b1064e98
which was reverted in I9e0d405e303ed86d23703ca6362e958dddb2f861
due to gsm0808_test failing.
The test failure is fixed by properly clearing the struct
gsm48_multirate_cfg prior to running tests (add memset(0)).
Change-Id: Ia782e21c206c15e840226d79b4209d13658ee916
Related: OS#3548
Add new command to once-off set each and every category to the given log level,
as discussed at length on the openbsc@ mailing list.
Show that it works in logging_vty_test.vty.
Change-Id: I4c3e4f786476cb813fdc0a7c64f30ee04758309d
Add a function to convert struct gsm48_multi_rate_conf, which holds the
codec settings for AMR, to S0-S15 bit representation as defined in
3GPP TS 48.008 3.2.2.49
Change-Id: I4e656731b16621736c7a2f4e64d9ce63b1064e98
Related: OS#3548
Add 'logging level force-all <level>' and 'no logging level force-all' as new
names for 'logging level all <level>' and 'logging level all everything'.
Resurrect the functionality of 'logging level all everything' -- even if it is
still deprecated because the name is confusing, it is now just an alias for
'no logging level force-all'.
Show in logging_vty_test.vty that we can now again lift the global logging
clamp, both with the new commands as well as with the deprecated ones.
Also show that 'force-all' is written back properly, if set.
Change-Id: I36f17c131cc70ce5a1aef62fd9693097de230cd4
The 'logging level all everything' has not had an effect for some time now. The
plan is to bring back its old functionality, but to keep it deprecated and
rather define a less confusing name.
* Deprecate 'everything'.
* Do not write 'everything' during 'write file' or 'show running-config', which
we curiously still do until now.
BTW, the reason why we need to compose a complete list of categories for the
deprecated 'everything' command is explained in detail in the commit log for
I3b083f27e3d751ccec258880ae7676e9af959a63
Change-Id: Ib75fedb0572570a61bb34ee729a2af86cf5f16da
Completely drop the implementations of log_vty_command_{str,description}().
These functions have been public API once, marked as deprecated since
c65c5b4ea0 (March 2017). I considered to keep
them, or reduce them to useless stubs, but it is quite silly, really. These
functions are completely and utterly useless outside of libosmocore. Any
program linking these deserves to fail.
Re-implement vty logging level command gen, in logging_vty.c. logging.c is
simply the wrong place for that.
Introduce logging_internal.h to share logging definitions to logging_vty.c
without publishing as API.
Introduce static gen_logging_level_cmd_strs() to compose a list of category
arguments with their descriptions for VTY commands. Use osmo_talloc_asprintf()
instead of the previous error prone and chaotic strlen() counting method.
Do not dynamically generate log level arguments, just keep static strings. We
are super unlikely to ever change the log levels we have.
No changes in logging_vty_test.vty: proves that there is no functional change.
All of this, besides introducing basic sanity, is cosmetic preparation to be
able to re-use the generic command generation code for arbitrary commands with
category or level args (for deprecated and new keywords).
Rationale: I want to hide 'all' and 'everything' from the VTY command
documentation, by means of deprecating. I first tried to simply define a
deprecated 'logging level CAT everything' command:
logging level (all|rsl|rr|...) (debug|info|notice|error|fatal)
logging level CAT everything # <- deprecated and hidden
But unfortunately, command matching doesn't work as intended when the CAT
argument reflects a valid category; I want it to invoke the deprecated function
as soon as the 'everything' keyword follows, but it stays stuck to the "valid"
command when the category argument matches an explicit keyword in that list,
and will throw an error on the following 'everything' keyword. I.e.:
logging level rsl everything
% Unknown command # <-- leads to config file parse error
logging level unknown_string everything
% Ignoring deprecated 'everything' # <-- works only for invalid categories
So I need to define 'everything' separately, again with a list of each valid
category instead of a generic CAT arg.
Change-Id: I3b083f27e3d751ccec258880ae7676e9af959a63
We already have osmo_str2lower() and osmo_str2upper(), but these lack:
* proper destination buffer bounds checking,
* ability to call directly as printf() argument.
Deprecate osmo_str2upper() and osmo_str2lower() because of missing bounds
checking.
Introduce osmo_str_tolower_buf(), osmo_str_toupper_buf() to provide
bounds-safe conversion, also able to safely convert a buffer in-place.
Introduce osmo_str_tolower(), osmo_str_toupper() that call the above _buf()
equivalents using a static buffer[128] and returning the resulting string
directly, convenient for direct printing. Possibly truncated but always safe.
Add unit tests to utils_test.c.
Replace all libosmocore uses of now deprecated osmo_str2lower().
Naming: the ctype.h API is called tolower() and toupper(), so just prepend
'osmo_str_' and don't separate 'to_lower'.
Change-Id: Ib0ee1206b9f31d7ba25c31f8008119ac55440797
Previsouly there were a lot of valid code paths which returned from the function
before setting bit counters which led to bogus BER output in osmo-bts-trx logs
when those code paths were hit.
Change-Id: I4722cae3794ccbb12001113c991d9cf345a52a96
In osmo_sock_unix_init(), add support for non-NUL-terminated unix
socket paths and return an error if the supplied socket path exceeds
the maximum socket path length supported by the operating system.
Change-Id: I19d935e5e3dd7928e6e153c6f5ad7044de726016
Related: OS#2673
The cell identifier list parameter is mandatory. Document it as
such, and tweak code which treated it like an optional parameter.
No functional change. The existing code already asserts that
a non-NULL value is passed for this parameter.
Change-Id: I3716f9d5b210e0a7e6f45c9fe3fc34024e5234ad
Related: OS#3021
Allow printing the source file information *after* the log information.
Add target->print_filename_pos, log_set_print_filename_pos() and enum
log_filename_pos, and the optional 'last' keyword to the 'logging print file'
vty command. (An enum in case we want to add other positions later.)
Rationale: on log lines, the logging context is usually printed first in the
logging text. Without the source file information, this logging context pretty
much aligns in an easily readable way. When adding the source file information,
each line's logging context info is shifted right by a pretty much random
amount and it is hard to spot recurring logging contexts.
One solution is to switch off source file info, of course, but that's not an
option when actively hacking on bugs and new features.
For example, it is unnecessarily hard to spot lchan FSM related log lines in
this osmo-bsc log snippet:
DRSL NOTICE mgw_endpoint_fsm.c:603 mgw-endpoint(conn0){WAIT_MGW_RESPONSE}: Freeing instance
DRSL NOTICE fsm.c:381 mgw-endpoint(conn0){WAIT_MGW_RESPONSE}: Deallocated
DMSC NOTICE mgw_endpoint_fsm.c:603 SUBSCR_CONN(conn0){CLEARING}: Received Event FORGET_MGW_ENDPOINT
DCHAN DEBUG lchan_rtp_fsm.c:741 lchan(0-0-1-TCH_F-0){WAIT_RLL_RTP_ESTABLISH}: Received Event LCHAN_EV_RTP_RELEASED
DCHAN DEBUG lchan_rtp_fsm.c:520 lchan_rtp(0-0-1-TCH_F-0){ROLLBACK}: Freeing instance
DCHAN DEBUG fsm.c:381 lchan_rtp(0-0-1-TCH_F-0){ROLLBACK}: Deallocated
DCHAN DEBUG lchan_rtp_fsm.c:520 lchan(0-0-1-TCH_F-0){WAIT_RLL_RTP_ESTABLISH}: Received Event LCHAN_EV_RTP_RELEASED
DCHAN DEBUG lchan_fsm.c:1232 lchan(0-0-1-TCH_F-0){WAIT_RLL_RTP_ESTABLISH}: state_chg to WAIT_RF_RELEASE_ACK
DRSL NOTICE handover_fsm.c:762 handover(interBSCin_conn0){WAIT_RR_HO_DETECT}: Terminating (cause = OSMO_FSM_TERM_REGULAR)
DRSL NOTICE handover_fsm.c:762 handover(interBSCin_conn0){WAIT_RR_HO_DETECT}: Freeing instance
DRSL NOTICE fsm.c:381 handover(interBSCin_conn0){WAIT_RR_HO_DETECT}: Deallocated
DCHAN DEBUG lchan_fsm.c:1196 lchan(0-0-1-TCH_F-0){WAIT_RF_RELEASE_ACK}: state_chg to BORKEN
DCHAN DEBUG lchan_fsm.c:354 lchan(0-0-1-TCH_F-0){BORKEN}: (type=TCH_F) Clearing lchan state
DLMGCP DEBUG mgcp_client.c:741 Tx MGCP msg to MGCP GW: 'DLCX 3 2@mgw MGCP 1.0'
DLMGCP DEBUG mgcp_client.c:743 Sending msg to MGCP GW size: 66
DRLL NOTICE mgcp_client_fsm.c:422 MGCP_CONN(to-BTS){ST_DLCX_RESP}: Received Event EV_DLCX_RESP
Placing the source file info behind the log text makes it much easier to
follow, while the source file info is still available:
DRSL NOTICE mgw-endpoint(conn0){WAIT_MGW_RESPONSE}: Freeing instance (mgw_endpoint_fsm.c:603)
DRSL NOTICE mgw-endpoint(conn0){WAIT_MGW_RESPONSE}: Deallocated (fsm.c:381)
DMSC NOTICE SUBSCR_CONN(conn0){CLEARING}: Received Event FORGET_MGW_ENDPOINT (mgw_endpoint_fsm.c:603)
DCHAN DEBUG lchan(0-0-1-TCH_F-0){WAIT_RLL_RTP_ESTABLISH}: Received Event LCHAN_EV_RTP_RELEASED (lchan_rtp_fsm.c:741)
DCHAN DEBUG lchan_rtp(0-0-1-TCH_F-0){ROLLBACK}: Freeing instance (lchan_rtp_fsm.c:520)
DCHAN DEBUG lchan_rtp(0-0-1-TCH_F-0){ROLLBACK}: Deallocated (fsm.c:381)
DCHAN DEBUG lchan(0-0-1-TCH_F-0){WAIT_RLL_RTP_ESTABLISH}: Received Event LCHAN_EV_RTP_RELEASED (lchan_rtp_fsm.c:520)
DCHAN DEBUG lchan(0-0-1-TCH_F-0){WAIT_RLL_RTP_ESTABLISH}: state_chg to WAIT_RF_RELEASE_ACK (lchan_fsm.c:1232)
DRSL NOTICE handover(interBSCin_conn0){WAIT_RR_HO_DETECT}: Terminating (cause = OSMO_FSM_TERM_REGULAR) (handover_fsm.c:745)
DRSL NOTICE handover(interBSCin_conn0){WAIT_RR_HO_DETECT}: Freeing instance (handover_fsm.c:745)
DRSL NOTICE handover(interBSCin_conn0){WAIT_RR_HO_DETECT}: Deallocated (fsm.c:381)
DCHAN DEBUG lchan(0-0-1-TCH_F-0){WAIT_RF_RELEASE_ACK}: state_chg to BORKEN (lchan_fsm.c:1196)
DCHAN DEBUG lchan(0-0-1-TCH_F-0){BORKEN}: (type=TCH_F) Clearing lchan state (lchan_fsm.c:354)
DLMGCP DEBUG Tx MGCP msg to MGCP GW: 'DLCX 3 12@mgw MGCP 1.0' (mgcp_client.c:741)
DLMGCP DEBUG Sending msg to MGCP GW size: 67 (mgcp_client.c:743)
DRLL NOTICE MGCP_CONN(to-BTS){ST_DLCX_RESP}: Received Event EV_DLCX_RESP (mgcp_client_fsm.c:422)
Implementation: for 'last', insert source file info only when an '\n' is found
at the end of the log line composition buffer, so that LOGP()...LOGPC()
constructs also print source file info only when a log line actually ends.
Change-Id: I393907b3c9e0cc1145e102328adad0a83ee13a9f
When gsmtap adding a new sink it does not supply OSMO_SOCK_F_UDP_REUSEADDR
in order to have SO_REUSEADDR applied. In most cases, the gsmtap sink is
just receiving packets to toss them immediately, so having one of them
is sufficient. However, in other use cases - particularly virt_phy -
we actually want to receve and process GSMTAP messages via multicast
Applying SO_REUSEADDR (like we did before disabling it globally for UDP
in I4a8ffb8d598aca88801a4a0322944d7cdd8d4047 on August 1st) resolves
the issue.
Change-Id: I1399a428467ca12f1564a14eb8ffb294d4f59874
Related: OS#3497
When IPPROTO_UDP is used then SO_REUSEADDR omitted since UDP is
connection less we do not have to wait until lingering connections time
out. There were also negative effects such as that two applicatications
could use the same UDP port, normally one of the two applications would
get an error, but with SO_REUSEADDR this is supressed. However, there
are applications (UDP MULTICAST) where two applications must be able to
use the same port. In the osmocom project those are osmo-bts-virtual,
virtphy and gsmtap in general.
Lets introduce a flag that the API user can supply in order to have
SO_REUSEADDR applied.
- Add new flag OSMO_SOCK_F_UDP_REUSEADDR
Change-Id: I94aaf6d5224ab23bde5ea5c4a83569b6145ab32b
Related: OS#3497
The intention was to use the file's basename, but __BASE_FILE__ means "the root
file that is being parsed and contains #include statements".
If we had a function using __BASE_FILE__ and that was defined in an #included
file, __BASE_FILE__ would indicate the first file where the #include is, and
not the file where the function is defined. __BASE_FILE__ works for us because
we don't ever include function definitions that log something, so __BASE_FILE__
always coincides with __FILE__ for our logging; but still __BASE_FILE__ is
semantically the wrong constant.
Related: OS#2740
Change-Id: Ibc1d3746f1876ac42d6b1faf0e5f83bd2283cdcc
Setting age to 5 is cleary an error, it should be increment by one
instead as APIs were added 0.11->0.12 and none modified or removed.
Change-Id: I3b3bc808349bc2f949ef9eef64f39e7202ddf946
Otherwise applications need to use "extern void* tall_sigh_ctx" and set
it manually (that symbol is not exported in any header file) or end up
allocating struct signal_handler into the NULL talloc ctx.
API created in a similar way as already existing msgb_talloc_ctx_init(),
but without the pool_size because it's not considered necessary in this
case.
Change-Id: Id58ca18eb826b8f4183a7cf0dbb2b38cba702a09
To reset the state of BSSGP allow to flush the BSSGP queues.
When testing (with TTCN3) the test object should be resetted between
each test.
Introduce the functions:
bssgp_fc_flush_queue() - flushs a single flow control object
bssgp_flush_all_queues() - flushs queues of all BSSGP connections
Change-Id: I29b6ad6742ddf9b0b58b4af37d9a1cf18e019325
There was gsm0480_l3hdr_push() declared in a header file, but
not exposed in 'libosmogsm.map'. Furthermore, for some reason
it was a part of GSM 04.80 API, what is not actually correct.
Let's rename this symbol, and properly expose it as a part of
the GSM 04.08 API. Also, let's introduce an auxiliary wrapper
for messages, where the transaction identifier is required
(see GSM 04.07, section 11.2.3.1.2).
Change-Id: I8a045efe8335d83fcbe8d43eb180972e3b1d9dda
the vty_config_write function should write:
line vty
login
to the configuration file when the login is enabled. Otherwise after
saving the configuration the next login will be performed without
password checking (password_check variable will be 0 though it must be 1)
Change-Id: I39050b6bf617dac10d3fccc3106f67bdcca1d05a
I was contacted by the (previously unknown) author who provided
the new location of the original code.
Change-Id: I2dabab20ad018ce473817986bdb250131c010bf1
When UDP is used as protocol (proto=IPPROTO_DUP), then we should not set
SO_REUSEADDR in the socket option. Because if we do, we allow two
processes to bind on the same UDP port. The errornous situation will be
undetectable to both applications. So lets only set SO_REUSEADDR when we
do not use UDP.
- Add check if we use UDP, if yes do not set SO_REUSEADDR
Change-Id: I4a8ffb8d598aca88801a4a0322944d7cdd8d4047
Related: OS#3441
the return code of the last setsockopt() call in osmo_sock_init() is not
checked. Since all other calls to setsockopt are checked, lets check
this one as well.
- check return code of setsockopt() and close the socket on failure
Change-Id: I96dbccc3bcff35bf39979dbe0c44aadc8ce20c83
In the previous commit we deprecated ipa_ccm_idtag_parse() but
also removed ipa_ccm_idtag_parse_off(), for which I couldn't find
any users. However, legacy openbsc.git still uses this function,
so let's re-introiduce it in its original form.
Change-Id: Ibfe53b04340eb355c8bfb8453a2af1522a4b6baf
In the past, the function ipa_ccm_idtag_parse() was used to parse
the payload of IPA CCM ID RESP packets. However, the function was
based on a possible misunderstanding of the message encoding, and
callers actually counted the first (upper) length nibble as part
of the header and passed a pointer to the second
(lower) length nibble of the first TLV into this function. As such,
it was unfixable, and had to be replaced with a new function called
ipa_ccm_id_resp_parse(). At the same time, we also add
ipa_ccm_id_get_parse() to parse the slightly different format of
the IPA CCM ID GET payload.
We can never be 100% sure what is "correct", as our understanding
of the protocol is entirely based on protocol analysis, without any
official documentation available.
This patch also introduces unit test coverage for both of the new
functions.
Revert "ipa: Add libosmogsm.map entry for ipa_ccm_idtag_parse_off"
This reverts commit 7f31c90b80.
Revert "ipa: Properly parse LV stream of a ID_GET request"
This reverts commit f558ed4bb9.
It introduced a function/behavior that was not originally intended:
The parse of IPA CCM ID GET (8bit length followed by 1 byte tag
and variable-length payload) instead of the IPA CCM ID RESP (16bit
length followed by 1 byte tag and variable-length payload).
Change-Id: I1834d90fbcdbfcb05f5b8cfe39bfe9543737ef8f
As we're moving this to a common/shared library now, we need to use
the osmo_ namespace prefix for symbol names, struct/type names and
constants.
Change-Id: Ie36729996abd30b84d1c30a09f62ebc6a9794950
This imports the code from osmo-msc 6afef893e17bce67e4d4119acd34d480ed03ba77
with minimal changes to make it compile. Symbol renaming to osmo_
prefix is done separately in a follow-up patch to have a as-clean-as-possible
import first.
Change-Id: I9bc38102318da02d1fe46ef516df3cfd6bf8e3da
Contrary to the existing gsm0480_create_ussd_resp(), the new function
only generates the value part of the FACILITY IE, and not the IE
Tag/Length or the 04.08 L3 header. This is needed in the context of
GSUP-encapsulated USSD, as here we don't work with L3 messages, but
only pass on the FACILITY IE value.
Change-Id: Ide240279240322f643e142229eb7829f538c6314
Since we ignore "logging level CAT everything" in logging_level_cmd, we
can never run into the case in which we have loglevel==EVERYTHING, so we
can simplify this code and make it esier for later removal of everything
keyword.
Change-Id: I4e76c65a11cc22616c6dfc632435617ebb861c03
The statsd protocol use ':' as seperator between name and value.
It's not allowed to use the seperator in a name. Replace ':' with '.'
before sending the packet to the statsd server.
Change-Id: Ib46d08481e8ca04afd97cb9ae241e4e39c91ad66
Previous logic regarding logging of verification and mangling of
rate_ctr groups made it difficult to debug when an issue occurrs.
Change-Id: I992d165cab5ee6ca9b5b7e4a2210a0951954bd34
As stated in its own documentation, reduce_xmaxcr_all() should only
return true when ALL XMAXC fields return true. However, previous
implementation returned true when at least one of them returned true.
As a result, if any of the sections is silent (for instance because one
of the bursts was lost), the whole frame is silenced, returning a zeroed buffer.
Related: OS#2700
Fixes: 40def49ac4 ("libosmocodec: implement ECU (Error Concealment Unit) for FR")
Change-Id: I1624b7c6574f53d0593a61645d4fdc5d56cabe96
valgrind complains about using unitialised bytes in syscalls.
I could imagine this happens when tcgetattr fails to set termios.
Change-Id: I9d165911fa3127afa8f836fa5c5c2e14a949474a
Callers require to know whether the returned ERROR cmd was received or
generated locally, in order to send it or do something with it locally.
Related: OS#3394
Change-Id: Ide9170e5c31967c353f8fe4e8227e64130b91eae
Previously we didn't take into account puncturing and BER was always around
30% for GPRS/EDGE bursts because of they use puncturing coding unlike
"classical" GSM bursts.
Change-Id: I9da22e7051522d06d923fcec3b63cbed8db93910
Our implementation generates ERROR CTRL messages with ID=error when it
is unable to parse a CMD. However, it doesn't account for them when
trying to receive and parse this kind of message. As a result, it will
return an ERROR message with a different description. This commit fixes
the old behaviour to success at parsing and returning the received
description to the caller.
Change-Id: I564ab1a7e845388f87accda44fbf165e5adc2480
enum gsm0808_permitted_speech does not have any value strings. Lets
add value strings to make debugging easier.
Change-Id: I5b5612a5df2758b0137a34c17f7c8c2b3f07c806
vty_test: add test against ambiguous cmd causing use-after-free and memory
leaks. Add this test along with the fix, because the new test triggers the
memory use-after-free and leaks, causing build failures.
Add cmd_deopt_with_ctx() to allow passing a specific talloc ctx.
is_cmd_ambiguous(): keep all cmd_deopt() allocations until the function exits.
Add a comment explaining why. Before this, if a command matched an optional
"[arg]" with square brackets, we would keep it in local var 'matched', but we
would free the string it points to at the end of that loop iteration; upon
encountering another match, we would attempt to strcmp against the freed
'matched'. Instead of adding hard-to-read and -verify free/alloc dances to keep
the 'matched' accurately freed/non-freed/..., just keep all cmd_deopt() string
allocated until done.
Needless to say that this should have been implemented on a lower level upon
inventing optional args, but at least this is fixing a program crash.
Related: OS#33903390
Change-Id: Ia71ba742108b5ff020997bfb612ad5eb30d04fcd
The conv_gen.py utility was tested against both Python 2 and 3,
so there is no need to enforce Python 2. Also, having:
#!/usr/local/bin/python{2|3}
is a bad idea, because Python may be installed in a different location.
Change-Id: I6007d481047b584db13d6eda70fb99f11f9ddaa1
In Change-Id I5a70eb65952cbc329bf96eacb428b07a9da32433 we redirected
all OSMO_ASSERT() via osmo_panic(). However, this caused various
applications to have build failures, as OSMO_ASSERT() now appeared
to be able to return to the call site. Let's inform the compiler
explicitly that there's no return from osmo_panic().
Change-Id: I8adf4c7b0ee6a4581cef8dd4e9f6a1dfde70ee55
A loooong time ago, we introduced osmo_panic() as a wrapper around
abort(). The advantage is, that this wrapper can be overridden, and
that it will also work in embedded (bare iron) targets, where the
abort simply translates to an infinite loop.
Change-Id: I5a70eb65952cbc329bf96eacb428b07a9da32433
Due to OS#3360, build testing for arm-none-eabi was unfortunately
skipped for a long time. This is a number of fixes that make the
compile test pass again.
Related: OS#3360
Change-Id: I88e3c8e1a8786ca2a6a023b0d27c74be200a8588
Return "invalid mandatory information" error status to
the sender in case bssgp_tlv_parse() failed.
To avoid loops, do not respond with an error status to
STATUS PDUs which failed parsing.
Change-Id: If73719b75a94d6742bdefc9b6572525cb00a96ee
Related: OS#3178
The return code from bssgp_tlv_parse() was not checked for a parsing
error. In case of a parsing error the stored return code could have
been overwritten later in this function.
Explicitly check for a parsing error and log corresponding packets.
Change-Id: Id3d7c52ec3df2bcf4efcee0e0b14fe22ef96964e
Related: OS#3178
Add:
gsm0808_create_handover_detect()
gsm0808_create_handover_complete()
gsm0808_create_handover_failure()
To existing structs gsm0808_old_bss_to_new_bss_info and
gsm0808_handover_required, add a final 'more_items' flag that makes future
extensions API and ABI compatible.
Fix the msgb string for Handover Request Ack.
Extend some API doc comments.
Related: OS#2283 (inter-BSC Handover, BSC side, MT)
Change-Id: I03ee7ce840ecfa0b6a33358e7385528aabd4873f
In Change-Id I1cee271fed0284a134ffed103c0d4bebbcfde2a8 we added support
for a new session state IE, but we didn't add any value_string array
for string conversion of it. Let's fix this.
Change-Id: I3d9f087786dc37c42498fa9a2be07483ec93ba7b
This function can be used to resolve the error message type for
a given message type. Can be used by generic error handlers that
work for any incoming message type.
Change-Id: Ic637bec53dd7fe3ec83da99b49b4eae34d5602b2
This function can be used when there is only a part of GSM 04.80
message available - Facility IE, e.g. when a message is carried
over GSUP/MAP. Let's expose it.
Refactoring includes the following:
- adding the 'gsm0480_' prefix;
- correcting inverted return value;
- cosmetic code style changes.
Change-Id: I623c39ffbe6cdee65eade8435a2faa04d0da193e
In some cases, there is no need to parse the whole message,
e.g. during the conversion from DTAP to GSUP/MAP. This
function can be used to extract given IE from a message.
Change-Id: I3989d061903352473305f80712f1a1560d05df3d
This function permits the user to register deprecated log categories,
which will ensure that if log categories are removed from a program,
old config files will still load.
We simply dynamically allocate a cmd_element and install it at
CFG_LOG_NODE. Not registering it at VIEW_NODE or ENABLE_NODE
ensures that it's not accessible from the interactive VTY, but only
from the config file / configure node.
Change-Id: I171f62ea2dc565b3a6c3eecd27fb7853e2529598
In order to be able to transfer SS/USSD messages via GSUP,
this change introduces the following new message types:
- OSMO_GSUP_MSGT_PROC_SS_*,
and the following new IE:
- OSMO_GSUP_SS_INFO_IE
which represents an ASN.1 encoded MAP payload coming to/from
the mobile station 'as is', without any transcoding.
Change-Id: Ie17a78043a35fffbdd59e80fd2b2da39cce5e532
Related: OS#1597
Unlike TCAP/MAP, GSUP is just a transport layer without the
dialogue/context. This prevents us from having session based
communication, required e.g. for USSD. But we can emulate
TCAP dialogue by adding additional IEs, which would allow
to relate each message to a particular session.
This change introduces the following IEs:
- OSMO_GSUP_SESSION_ID_IE,
- OSMO_GSUP_SESSION_STATE_IE,
which optionally can be used to indicate that the message is
related to a session with given ID, and to manage session
state, i.e. initiate, continue, and finish.
Change-Id: I1cee271fed0284a134ffed103c0d4bebbcfde2a8
Related: OS#1597
According to the 3GPP TS 04.80, table 2.5 'Release complete', a
RELEASE_COMPLETE message may containg optional FACILITY element.
Meanwhile, the 0xff byte is used to indicate that there is no
decoded message (legacy field). Let's avoid overwriting of
a decoded message.
Change-Id: I0c85292222749a48ca0c4b2e93f4fa2d61468c18
The idea is to be able to add a gsm0808_cell_id to a gsm0808_cell_id_list2:
first convert it to a list, then re-use gsm0808_cell_id_list_add(). It will be
used by osmo-bsc to manage neighbor-BSS cell identifiers from VTY.
Change-Id: Ibf746ac60b1b1e920baf494b396658a5ceabd788
There are some symbols for use between control_cmd.c and control_if.c,
which are not supposed to be exported publicly. Let's make sure we
keep those symbols local.
Change-Id: Ia85f36a9c4b2ebf4003718e0a230959638370320
Add a new VTY command which shows all rate counters registered
with libosmocore.
Change-Id: Id60a5aa2d961ae99cddf1e776358a5517dbc573d
Depends: Idb3ec12494ff6a3a05efcc8818e78d1baa6546bd
Related: OS#3245
This new function can be used to print a rate counter group according
to a format string. The intention is to generalize and replace manual
printing of counters as implemented for the 'show statistics' VTY
command of osmo-bsc.
Related: OS#3245
Related: osmo-bsc commit 71d524c059c5a5c90e7cb77d8a2134c1c68b9cde (g#9217)
Change-Id: Idb3ec12494ff6a3a05efcc8818e78d1baa6546bd
For some strange reason, the osmo_mncc_name() inline function
was not in the mncc.h header, but in the mncc.c file. Let's fix that.
Change-Id: I2c3666510c981dffa4ba25bed517fd7ebd1250f5