Various users of gsm48_hdr apply the same hardcoded shifts/bitmasks to obtain
the transaction ID encoded in the upper nibble of the protocol discriminator.
Centralize. Patch for openbsc.git will follow.
Add inline functions for both release <= 98 and release >= 99 as well as a
default define. Use the release 98 by default since the current code base uses
the r98 bitmasks.
These inline functions relieve callers of the decision on masking bits of the
protocol discriminator and message type octets.
Also add a define for the protocol discriminator extension to one octet length
(GSM48_PDISC_EXTEND).
Apply new pdisc function in gsm0480.c.
[hfreyther: Make the hdr param const]
Currently the LOGP/DEBUGP arguments are always evaluated even if
no logging will happen at all. This can be expensive, for instance
if hexdumps or pretty printed object names are generated. This causes
high base load especially on embedded devices and is a major part of
CPU usage e.g. of the osmo-pcu.
This commit uses the log_check_level function to avoid the evaluation
of the parameters if it is known in advance, that no logging entry
will be generated.
Sponsored-by: On-Waves ehf
This commit adds this predicate function which can be used to
avoid the execution of code if a certain log level is not enabled.
The function will only return 0 (false), if it is sure that a logging
call for the same facility and level will not produce any output.
This safety criterion shall ensure, that no logging output is lost
due to the use of this predicate as a guard. On the other hand, even
if the predicate returns != 0 (true), no logging output might get
generated by a similar logging command.
Note that the current implementation is not focussed on performance,
which could be improved by using a lookup table instead of iterating
through every target.
Sponsored-by: On-Waves ehf
It's sometimes handy for debugging to be able to immediately see which
bits are set in a given byte. Generalize macro used for that in bitvec
tests and make it available for the rest of the library.
This may seem like overkill for a mere const char * config item, but it makes
the Control interface VTY commands reusable in any main() scope (inspired by
libosmo-abis' VTY config).
Add API functions ctrl_vty_init() and ctrl_vty_get_bind_addr(), in new files
src/ctrl/control_vty.c and include/osmocom/ctrl/control_vty.h, compiled and/or
installed dependent on ENABLE_VTY.
Using these functions allows configuring a static const char* with the VTY
commands
ctrl
bind A.B.C.D
which callers shall subsequently use to bind the Control interface to a
specific local interface address, by passing the return value of
ctrl_vty_get_bind_addr() to control_interface_setup().
Add CTRL_NODE to enum node_type, "eating" RESERVED4_NODE to heed that comment
on avoiding ABI changes.
Make the ctrl interface bind address configurable, so that it may be made
available on other addresses than 127.0.0.1. The specific aim is to allow
running multiple osmo-nitbs alongside each other (commits in openbsc follow).
Add VTY command
line vty
bind A.B.C.D
The command merely stores the configured IP-address, which can then be used by
the calling main program to set the telnet port of the VTY line. (Commits in
openbsc and osmo-iuh will follow up on this.)
Add function vty_get_bind_addr() to publish the address in the vty.h API.
Add static vty_bind_addr to store.
For allocation/freeing reasons, a NULL address defaults to 127.0.0.1.
BTW, I decided against allowing keywords 'any' and 'localhost' in place of an
actual IP address to make sure a written config is always identical to the
parsed config.
Previously the presence of header and data blocks were communicated
in-band which decreases code readability and makes it unnecessary hard
to add support for new hardware.
Note: OsmoBTS have to be modified to take advantage of extended
ph_data_param structure.
This function originates from openbsc/src/gprs but is just specific
to BSSGP/Gb on the same level like bssgp_msgb_alloc.
This commit puts the former gprs_msgb_copy function beside
bssgp_msgb_alloc.
Renamed function:
gprs_msgb_copy -> bssgp_msgb_copy
Sponsored-by: On-Waves ehf
Add bit map encoder and decoder functions: decoder is fully functional
while encoder is good enough for testing - no backtracking to find
the best possible compression is implemented. If somebody is willing to
implement MS side of EDGE than this has to be expanded.
Add corresponding tests.
N. B: the encoding is implemented according to ETSI TS 44.060 which is
slightly different from T4 used for fax according to CCITT G31D (RFC 804).
Ticket: OW#2407
Sponsored-by: On-Waves ehf
Signed-off-by: Max <msuraev@sysmocom.de>
bitvec_read_field/bitvec_write_field in the PCU used a C++ reference
and when porting to C it was decided to pass the parameter by value
and this lost the "back propagation" of the new index. Change the
parameter to be an in/out parameter and this way do not have a silent
semantic break in the osmo-pcu (where we copy the reference in csn.1
by value) and have a true compile failure.
Add Max's simple test for bitvec_unhex function leaving the checking
of bitvec_read_field and the side effect in the datastructure about
the number of bits still open.
Allocation, pack/unpack, field access and helper routines used
extensively by Osmo-PCU. Whenever memory allocation happens, alocator
context is passed explicitly by caller.
Currently msgb_trim only checks for len > data_len and returns -1
in that case, allowing the caller to fix it somehow. Using a negative
length will always lead to a corrupt msgb, but this is not being
checked.
This commit adds a check for len < 0 and a conditional call to MSGB_ABORT.
Sponsored-by: On-Waves ehf
The new functions bitvec_get_bytes and bitvec_set_bytes copy
byte sequences from bitvecs to uint8_t arrays and vice versa.
While the bytes in the bitvecs do not need to be aligned, the uint8_t
arrays always are. In case the bytes in the bitvec are aligned, the
implementation uses memcpy.
Note that the implementation like the other existing functions assume
MSB first encoding.
[hfreyther: Squash the comment fix into this commit as well]
Sponsored-by: On-Waves ehf
These functions are currently part of openbsc but also needed by
other projects.
The function have been renamed as follows:
gprs_apn_to_str -> osmo_apn_to_str
gprs_str_to_apn -> osmo_apn_from_str
Sponsored-by: On-Waves ehf
These functions originate from openbsc/src/gprs but are generic
msgb helper functions.
msgb_copy: This function allocates a new msgb, copies the data
buffer of msg, and adjusts the pointers (incl. l1h-l4h)
accordingly.
msgb_resize_area:
This resizes a sub area of the msgb data and adjusts the
pointers (incl. l1h-l4h) accordingly.
Sponsored-by: On-Waves ehf
This symbol is globally visible and therefore should have an OSMO
prefix like the other identifiers exported by stat_item.h.
Sponsored-by: On-Waves ehf
Shipping our own private copy of talloc was a good idea in 2008,
when it was not readily available on most target platforms. Today,
the situation is quite different, as it is a standard library on
major Linux distributions.
This commit moves the stats specific code parts into stats_statsd.c
while keeping the generic parts in stats.c. The code in stats.c no
longer contains references to statsd symbols.
Note that the VTY code still needs to know about every stats reporter
backend.
Sponsored-by: On-Waves ehf
This introduces a new configure flag by which the libosmocore-internal
talloc code is not compiled, but rather a system-wide libtalloc is used.
When we started openbsc/libosmocore in 2008, libtalloc was not widely
present on systems yet. This has changed meanwhile, and we should
simply use the system-wide library
Currently only counter changes and new item values are being
reported. This makes it cumbersome to configure reporting clients,
since there is nothing like a list of all parameters.
This commit changes this behaviour such that all currently existing
counters and items that would be reported eventually, are passed to
the reporter when it has been reconfigured or enabled. If a counter
has not been incremented, 0 is sent. If a stat item value has not
been added, the last item value (or the default value if there is
none) is resent again.
Note that this will not catch transient counters/items that will be
created later on, e.g. triggered by new peers or subscribers.
To just force this kind of dump on a running reporter, it is
sufficient to invoke the 'enable' command in its configuration node.
Sponsored-by: On-Waves ehf
The NS object is created with an unknown identity and only after
the reset procedure has progressed (completed?) we know the real
ID for this peer. Before nobody has looked at the idx values (this
could have been seen with the CTRL interface) but with statsd the
wrong NSVCI becomes obvious.
Add routines to update the idx and I don't know if the change of
idx is causing any issues but we will find that out soon.
Currently there is only the 'show stats' command which shows all
counter and stat_item values. This can lead to many lines of output
if there are per-subscriber rate counters.
The new command added by this commit allows it to only show groups of
a certain level (class_id), similar to the 'level' configuration
command for stats reporter.
The new command is
show stats level (global|peer|subscriber)
Sponsored-by: On-Waves ehf
This log level is used by the stats subsystem log reporter to report
statistics to level INFO. Note that the default level of DLSTATS is
NOTICE.
Sponsored-by: On-Waves ehf
This commit adds class_id fields to the rate_ctr and stat_item group
descriptions. The stats reporter code is extended to only process
groups whose class_id does not exceed a per reporter max_class level.
If the class_id is not set, the code assumes 'global' for groups with
idx == 0 and 'subscriber' otherwise.
The following vty command is added to config-stats:
level (global|peer|subscriber) Set the maximum group level
Sponsored-by: On-Waves ehf
Currently every time a node is added to enum node_type, this
constitutes an ABI change, since _LAST_OSMOVTY_NODE will get
incremented accordingly. In this case, every project that adds new
node type based on that value will have to be recompiled.
This commit adds 4 spare node type values, which can be replaced
one-by-one by new real types until they are exhausted to avoid
this kind of ABI change.
Sponsored-by: On-Waves ehf
Since the the stat_item and stats functions and data types are meant
to be exported, they get an osmo_ prefix.
Sponsored-by: On-Waves ehf
[hfreyther: Prepended the enum values too. This was requested by
Jacob]
This reporter passes the measurement values to the logging subsystem
as DSTATS (which is currently DLGLOBAL) level INFO messages.
Sponsored-by: On-Waves ehf
Currently case statements are used to select the right reporter
functions. This makes it difficult to add new reporter types,
especially if they are not going to reside in the same file.
This commit introduces per reporter function pointer for
open, close, send_count, and send_item. They are checked for
non-NULL before being called or skipped.
Sponsored-by: On-Waves ehf
To support reporters without network configuration, this commit
introduces the have_net_config flag to provide corresponding error
messages.
Sponsored-by: On-Waves ehf
If the MTU is given, combine several messages into a single UDP
packet until the limit is reached. Flush all reporters after the
values have been scanned.
New vty commands (node config-stats):
mtu <100-65535> Enable multi-metric packets and set the maximum
packet size (in byte)
no mtu Disable multi-metric packets
Note that single messages that are longer than the given MTU (minus
28 octets protocol overhead) will be dropped.
Sponsored-by: On-Waves ehf
The osmo_counter_difference returns the counter value difference
since the last call of this function with the given counter object.
Sponsored-by: On-Waves ehf
This calls stats_flush in regular intervals which polls the
statistical values and calls the active reporters when values have
changed.
Sponsored-by: On-Waves ehf
This commit provides stats configuration similar to the log
configuration.
The following vty commands are added to the config node:
stats reporter statsd Create/Modify a statsd reporter
no stats reporter statsd Remove a statsd reporter
To actually configure a reporter, the config-stats node is entered
when the "stats reporter" command has succeeded. The following new
vty commands are available there:
local-ip ADDR Set the IP address to which we bind locally
no local-ip Do not bind to a certain IP address
remote-ip ADDR Set the remote IP address to which we connect
remote-port <1-65535> Set the remote port to which we connect
prefix PREFIX Set the item/counter name prefix
no prefix Do not use a prefix
enable Enable the reporter
disable Disable the reporter
Sponsored-by: On-Waves ehf
This commit provides the stats reporting framework that can manage
several types of measurement reporters. Initially support for
rate_ctr and the statsd protocol is included.
Sponsored-by: On-Waves ehf
This file will contain the VTY code related to statistics.
This commit adds a minimal file with just as single VTY command:
- show stats This command shows all statistical values
To enable this and future commands, the main program needs to call
stats_vty_add_cmds().
Sponsored-by: On-Waves ehf
This commit adds the following functions:
stat_item_for_each_group Call a handler for each group
stat_item_for_each_item Call a handler for each item of a
group
Sponsored-by: On-Waves ehf
For global value reporting, some additional helper functions are
needed. The statsd protocol expects differential counter values,
which are currently not provided by rate_ctr (except for s/m/h/d
intervals).
This commit adds several helper functions to rate_ctr:
- rate_ctr_difference returns the counter delta since the last
call to this function for a given counter
- rate_ctr_for_each_counter
iterates through each counter of a group
- rate_ctr_for_each_group
iterates through all globally registered
counter groups
Note that the rate_ctr_difference function can only be used by a
single backend, since it modifies the 'previous' field in the
rate_ctr obj.
Sponsored-by: On-Waves ehf
Currently each stat item has a separate index value which basically
counts each single value added to the item and which can be used by
a reporter to get all new values that have not been reported yet.
The drawback is, that such an index must be stored for each stat
item.
This commit introduces a global index which is incremented for each
new stat item value. This index is then stored together with the item
value. So a single stored index per reporter is sufficient to make
sure that only new values are reported.
Sponsored-by: On-Waves ehf
The following counters are added to the ns.nsvc counter group:
lost.alive The number of missing ALIVE ACK messages
lost.reset The number of missing RESET ACK messages
The following items are added to the ns.nsvc stat item group:
alive.delay The time in ms between sending ALIVE and
receiving the next ALIVE ACK
Sponsored-by: On-Waves ehf
This commit adds instrumentation function to gather measurement
and statistical values similar to counter groups.
Multiple values can be stored per item, which can be retrieved in
FIFO order. Getting values from the item does not modify its state to
allow for multiple independant backends (e.g. VTY and statd).
When a new value is set, the oldest value gets silently overwritten.
Lost values are skipped when getting values from the item.
Sponsored-by: On-Waves ehf
We are mixing enums and hope that no short-enums are used. This
is leading to a lot compiler warnings generated by clang. Change
the API to work with integers.
Porting:
The go_parent_cb implementations in the applications need to be
fixed. The API change leads to a compile time warning.
Fixes:
abis_om2000_vty.c:46:2: warning: implicit conversion from enumeration type 'enum bsc_vty_node' to
different enumeration type 'enum node_type' [-Wenum-conversion]
OM2K_NODE,
^~~~~~~~~
For some reason the structure is closer to be a LV (length
and value). The value is actually a tag but it is counted
inside the length. Introduce an overload of the parse function
to provide an offset for the length. This will be taken from
the returned length.
The current functions are used to 'qualify' an APN from the
user-supplied APN name (name identifier) towards the fully-qualified
APN name which is used in the .grps DNS zone.
Currently large values for Bmax default MS get sliced since a uint16_t is
used as the type of the corresponding parameter of bssgp_tx_fc_bvc.
GSM 48.018, 11.3.2 which in turn refers to 11.3.5 specifies a maximum
of 6MB (0xffff * 100).
This commit changes the type to uint32_t to cover the full value
range.
Sponsored-by: On-Waves ehf
The cast is not present in the original macro and was added
in OpenBSC with commit (be68f6fc6cde1367a4481d2e774a64e2cd657267)
to help using the header with C++. Due the recent issue in
the bssgp flow control code, let's remove the cast to see
wrong pointer usage. In case C++ code doesn't compile anymore
we can see how to add a cast back to it.
Change was proposed by Michael McTernan
In OSX the int declares linkage and for libosmo-abis we have
two static asserts with the same name in two different compilation
units. When adding the "unused" attribute I removed the typedef.
I verified with a gcc 4.9.2 that no new warnings will be shown
when compiling libosmo-abis.
Currently the return value of the gprs_ns_tx family of functions is
often ignored. This is not a serious issue, since the successful
delivery of the messages is neither guaranteed nor acknowledged by
the network layer anyway.
Nevertheless this commit adds logging (level INFO) to gprs_ns_tx and
gprs_ns_msgb_alloc. The definition of the latter has been moved from
the header file to gprs_ns.c.
Fixes: Coverity CID 1040678, 1040679, 1040680, 1040681, 1040682,
1040683, 1040684, 1040686, 1040687, 1040688, 1111545,
1240203, 1240204
Sponsored-by: On-Waves ehf
On GNU __BYTE_ORDER and __LITTLE_ENDIAN is defined and
the include is "endian.h" on FreeBSD it is "sys/endian.h"
and LITTLE_ENDIAN/_LITTLE_ENDIAN and BYTE_ORDER/_BYTE_ORDER
is defined.
Create a header file that defines OSMO_IS_LITTLE_ENDIAN
and OSMO_IS_BIG_ENDIAN and can be used as
#if OSMO_IS_LITTLE_ENDIAN
do_little_endian
#elif OSMO_IS_BIG_ENDIAN
do_big_endian
#else
#error "Unknown endian"
#endif
Currently incoming BSSGP STATUS messages are just logged and no other
action is taken. This makes it impossible for higher layers to react
to failures which are indicated by corresponding STATUS messages
unless a timeout is triggered as a result of that failure later on.
This commit adds a bssgp_rx_status() function and calls it on
incoming STATUS messages. That function logs a message, increments the
new BSSGP_CTR_STATUS counter if the bctx context exists and invokes
an NM_STATUS status indication. The latter will allow the application
to handle failures immediately. Since all STATUS messages should be
handled, the function is already called in bssgp_rcvmsg and the
message is no longer handled in (and will not reach) bssgp_rx_sign
and bssgp_rx_ptp.
Ticket: OW#1414
Sponsored-by: On-Waves ehf
These patches enhance the Supplementary Service (SS) processing from
only being able to handle USSD to other SS, specifically activation,
deactivation and interrogation of those SS. Registration is not yet
implemented.
include/osmocom/gsm/protocol/gsm_09_02.h has been added with needed
values for SS.
Modified by Harald Welte to keep the old ussd-only functiosn for API/ABI
stability.
A pointer to struct osmo_fd is used in a few prototypes declared in
gsm/ipa.h, but is neither declared explicitly nor is such a
declaration reachable via the given include directives.
This patch adds a forward declaration of this type to ensure proper
compilation.
Sponsored-by: On-Waves ehf
We want to see from which category/subsystem a certain log message
is coming from and use a different timestamp format as well. Add
two new bitfields. This doesn't change the size of the structure
and on 32bit we still have 27bits left.
The extended timestamp will take preference over the current and
default timestamp format.
Fixes: SYS#602
For the BSC/NITB application we see that people modify the band
without modifying the ARFCN. This creates an unbootable config.
Using the new hook the BSC/NITB can check if the config is
consistent and prevent the config file being written.
Related: SYS#739
The copyright holders Harald Welte, Holger Freyther, Andreas Eversberg
and sysmocom - s.f.m.c. GmbH (represented by Holger and Harald) agree
that the license of libosmogb should be GPLv2+ and not AGPLv3+.
The reason the source files stated AGPLv3+ is due to the history, as
they were moved from OpenBSC to libosmocore at the time we needed to use
them from osmo-pcu. It was an oversight back then to not re-license
them accordingly.
Currently gprs_nsvc_reset does not return any value.
This patch changes the function to return an integer, where a value
less than zero indicates an error. The value is taken from the
gprs_ns_tx_reset function. In case of failure, an error message is logged.
Sponsored-by: On-Waves ehf
Sometimes a control interface command cannot be processed
and responded immediately, but we need to process it asynchronously.
In order to support this, we introduce the 'ctrl_cmd_def', which
represents such a deferred command. It is created by the service
implementing the command using ctrl_cmd_def_make(), and a response is
later sent using ctrl_cmd_def_send().
ctrl_cmd_def_is_zombie() must be called to handle the case where
the control connection has disconnected/died between receiving the
command and sending the response.
The control interface user now only has to register a very short
node lookup function callback. This function is optional, and only
required if hierarchical command lookup should be supported.
As we are breaking builds by moving functions from libosmo-abis to
libosmocore anyway, we might as well give functions more appropriate
names. ipaccess is a company, while IPA is the multiplex protocol, and
CCM is the protocol used for establishing identities on the IPA
multiplex.
libosmo-abis is about forming A-bis interfaces/lines by means
of E1 or the IPA multiplex (or possibly other link layers).
The IPA multiplex is used in other contexts, such as the Control
interface, or the A interface. In that context, it makes sense to
have generic IPA related functions in libosmocore.
This adds support for A-over-IP and LCLS related message/IEI
definitions.
Old definitions are in decimal, which is very hard (at least for me)
to compare with the binary tables in the spec. Hex is much easier
to manually compare for completeness/correctness. I didn't touch
the existing definitions, but think they should move to hex, too.
Rename NM_ATT_O_REDUCEPOWER to NM_ATT_OSMO_REDUCEPOWER, which
makes it more clear that this is an osmcoom specific attribute.
Also, we cannot simply overload 0x01 as an already defined OML
attribute. The problem is quite simple: When we use abis_nm_att_tlvdef
during the TLV parse, 0x01 will match to NM_ATT_ABIS_CHANNEL,
which is defined as { TLV_TYPE_FIXED, 3 }.
So instead, we need to introduce a new abis_nm_osmo_att_tlvdef[],
which has to be patched into abis_nm_att_tlvdef[] by the means of
tlv_def_patch(), exactly how we do it for bs-11 and nanobts specific
attributes.
I'm using 0xfe for the attribute, as 0xfe doesn't overlap with the IPA
specific attribues (and we might want to combine/merge the 12.21 plus
IPA plus osmocom spefici attributes)
If LAPDm receives an I-Frame while there already is an I-Frame in the
tx_queue the code generates an additional RR (to acknowledge the
received I-Frame). Instead, N(R) of the I-Frame in the tx_queue should
be updated to ACK the data.
Currently it takes 3s to establish a SAPI 3 SACCH connection with
osmo-bts. This is due to the fact, that a broken SABME request is
sent first and and is ignored by the MS. Then, after a T200 timeout
(2s) the SABME command is sent again (this time correctly) and
answered by the MS.
The first SABME message is broken (it has a length field of 3 and
ends with 3 bytes from the tail of the original RSL message),
because of it is expected throughout lapdm.c that msg buffers
containing RSL have msg->l2h == msg->data. Some abis input drivers
fulfill this but IPA doesn't, thus the 3 bytes of the IPA header
are still part of the msg and confuse length computation.
Since internal fields of the msg are modified directly, this is
difficult to see.
This patch adds a new function msgb_pull_to_l3() that explicitely
skips over all headers prepending L3 and therefore resets l1h and
l2h. This function is then used instead of msgb_pull_l2h() which
only worked correctly when msg->l2h == msg->data. In addition,
code manipulating msg->tail and msg->len directly has been replaced
by calls to msgb_trim().
Note that this patch does not fix all issues of this case in the LADP
related code.
Ticket: SYS#192
Sponsored-by: On-Waves ehf
This function works like osmo_hexdump() and returns a static buffer
containing hex bytes along with markers for the layers.
Note that it uses osmo_hexdump() internally, thus a call to
msgb_hexdump() invalidates the buffer that has been returned by an
earlier call to osmo_hexdump(). In short: don't mix them in a single
call printf().
Sponsored-by: On-Waves ehf
The legacy 7bit conversion functions (those without the '_n_' in the
name) gave wrong return values on 64 bit platforms due to unproper
signed/unsigned conversions and the usage of SIZE_MAX.
This patch fixes this by using a smaller max size (see
GSM_7BIT_LEGACY_MAX_BUFFER_SIZE, currently set to 64k) for the legacy
wrappers and by using unsigned int for max_septets.
In addition, there are tests now that check the return values of
legacy encoding and decoding.
Sponsored-by: On-Waves ehf
abis_nm_pchan4chcomb will return a pchan for a given channel
combination but returned a value of the channel combination.
Fix it to return the physical channel combination.
Fixes: Coverity CID 1040767
This changes the implementations for the reception of RESET and
RESET_ACK to be compatible with 3GPP TS 08.16, 7.3.1:
- Just send a RESET_ACK with correct values back to the SGSN when a
RESET with an invalid NSVCI or NSEI has been received.
- Check RESET_ACK for matching NSEI and NSVCI.
- Ignore unexpected RESET_ACKs.
In addition, use RESET_ACK from a BSS to update the BSS source
address based on the NSVCI to be tolerant with changing UDP source
addresses/ports.
Sponsored-by: On-Waves ehf
Under special circumstances (see below) receiving a NS-RESET leads to
duplicated NS-VC entries.
This happens when the source port of a NS-VC changes to a new one
that has already been used by another NS-VC.
This patch changes gprs_ns_rx_reset() to check for this case and to
use the existing NS-VC object. The NS-VC object that was associated
with the source address before is detached from this source but kept
in the NS-VC list so that it can be reattached when a correspondent
NS-RESET is received later on. Meanwhile it will have a cleared link
layer address which will not match a real link info.
A new counter NS_CTR_REPLACED is incremented each time when the NS-VC
object is replacing another one. A new signal S_NS_REPLACED is added
which gets dispatched in this case, too.
Another new counter NS_CTR_NSEI_CHG is incremented each time when the
NSEI of a NS-VC object (with fixed NSVCI) changes.
Ticket: OW#874
Sponsored-by: On-Waves ehf
Adds the functions gprs_ns_ll_copy() and gprs_ns_ll_clear(). Renames
gprs_ns_format_peer() to gprs_ns_ll_str(). All of these functions
uniformly access the link layer part within the NS-VC objects.
Sponsored-by: On-Waves ehf
Register an osmo signal handler to print a short notice about every
SS_L_NS signal that is generated while processing the tests.
Sponsored-by: On-Waves ehf
The testcase didn't work on Ubuntu 12.04 because vty_create will
directly call vty_event (e.g. not through the plt). This means
that the approach to override vty_event in the testcase failed.
Use the signal interface of libosmocore and make the testcase
use it. The signals can be generally useful as well.
This patch refactors gprs_ns_rcvmsg() by moving the parts relevant to
the NS messages into the new functions gprs_ns_vc_create() (nsvc
object creation) and gprs_ns_process_msg() (main NS automaton). These
do not contain code that directly depends on the link layer (they
call other functions that still do). This reduces the gprs_ns_rcvmsg()
function to calling these two functions and optionally setting up the
link layer specific fields of the nsvc.
Sponsored-by: On-Waves ehf
This explicitely allows aliasing of this struct to avoid the warning
shown below. Note, that this warning isn't show when
'-fno-strict-aliasing' is used.
Addresses:
gb/gprs_ns_test.c:85:54: warning: dereferencing type-punned pointer will
break strict-aliasing rules [-Wstrict-aliasing]
This information element has been added to the MM Information
message in GSM24.008. This patch adds it to the tlv_definition
to keep the TLV parser from breaking.
Ticket: OW#978
This adds the vty_install_default() function that is basically the
install_default() function plus the registration of the commands
'exit' and 'end'. The latter is only provided in subnodes of
ENABLED_NODE and CONFIG_NONE.
The VTY test program is extended to check these commands.
Ticket: OW#952
The number of digits is the number of used octets times two (two
digits per octet). The result has been successfully dissected by
wireshark. It has not been tested with real phones.
This reverts commit bf991bc0f3 and
fixes the bug instead. It's just sufficient to remove the defined()
test, since identifiers that aren't macros are just considered as
0 when used with #if. (see cpp info page, section 4.2.2 'If'
in cpp-4.6.info)
The code started to use #if defined(...) but the value was always
for GCC/Clang. The only difference was that for older compilers
the value of the definition was 0. Conditionally define these
macros.
Add a new core/defs.h file for definitions that can be used from
within header files without including prototypes and extern
declarations. It's primarily meant for macro definitions and basic
typedefs.
Move the definition of OSMO_DEPRECATED there and use compiler version
info to avoid compiler errors.
The 7bit<->8bit encoding/decoding functions didn't check whether
there is still enough space in the destination buffer. Therefore a
buffer size parameter has been added to each of the functions which
is used to truncate the output if the buffer is too small.
In addition, the return value of the decoding functions has been
changed to number of characters written (excluding \0), so this
value is always equal to strlen(decoded).
The old functions are still available as wrapper functions.
Handling 7-bit coding is a little different for USSD, as TS 03.38
states:
To avoid the situation where the receiving entity confuses 7 binary
zero pad bits as the @ character, the carriage return or <CR>
character shall be used for padding in this situation [...].
If <CR> is intended to be the last character and the message
(including the wanted <CR>) ends on an octet boundary, then another
<CR> must be added together with a padding bit 0. The receiving entity
will perform the carriage return function twice, but this will not
result in misoperation as the definition of <CR> [...] is identical to
the definition of <CR><CR>.
The receiving entity shall remove the final <CR> character where the
message ends on an octet boundary with <CR> as the last character.
Jacob has verified the fix with fakeBTS and the wireshark dissector.
Fixes: OW#947
Reviewed-by: Jacob Erlbeck <jerlbeck@sysmocom.de>
In order to control layer 1 via primitives, MPH primitives are required.
There is only one (MPH-INFO) primitive defined in TS 04.04 for all control
and measurement functions. A type identifier inside this primitive is used
to differentiate between different functions.
The TCH primitives are used to carry traffic. TCH primitives carry voice
or data traffic, whereas PH-DATA primitives carry FACCH data.
PH_RTS and TCH_RTS (ready-to-send) primitives are used to poll requests
from upper layers.
The modified macro is still working on a gcc 4.7 and gcc 4.8 after the
removal of the typedef and addition of the unused attribute.
include/osmocom/core/msgb.h: In function ‘msgb_alloc_headroom’:
include/osmocom/core/utils.h:40:51: warning: typedef ‘dummyheadroom_bigger’ locally defined but not used [-Wunused-local-typedefs]
#define osmo_static_assert(exp, name) typedef int dummy##name [(exp) ? 1 : -1];
^
include/osmocom/core/msgb.h:386:2: note: in expansion of macro ‘osmo_static_assert’
osmo_static_assert(size > headroom, headroom_bigger);
^
This is changing the semantic of the assert. The regression tests
now either need to check the stderr result, the exit status or print
a message when all tests are completed.
This is not that bad as the osmo_generate_backtrace is printing to
the stdout right now.
Neels Hofmeyr
Max
Harald Welte
Sylvain Munaut
Daniel Willmann