This adds a more complete set of API documentation for all
osmo_counter relatedd functions and definitions.
Change-Id: I24283c05620ee86a8beb165af98a85d754549efb
The stat_item code base had some incomplete doxygen documentation
so far. Let's complete it, and at the same time fix some cosmetic
as well as copy+paste issues in the existing documentation bits.
Change-Id: Ib514c137b40bf7b9791bd74be99af0b65575f2b6
With stat_item, stats.c and stats_statsd.c, it is becoming a bit
difficult to understand file naming. Also, the 'statistics.c' file
actually only contained osmo_counter handling, so let's rename it to
counter.c altogether.
Change-Id: I2cfb2310543902b7da46cb15a76e2da317eaed7d
Add osmo_sub_auth_type_names[] and osmo_sub_auth_type_name().
Also add a hint to enum osmo_auth_algo's API doc that osmo_auth_alg_name()
already exists (it is defined further below).
Change-Id: I652a929bcd11c694d86812fb03d0a1cbd985efda
The function is a wrapper on top of getrandom() (if available via glibc) or
corresponding syscall. If neither is available than failure is always
returned.
It's intended to generate small random data good enough for session
identifiers and keys. To generate long-term cryptographic keys it's
better to use special crypto libraries (like GnuTLS for example)
instead.
As an example it's used to replace old insecure random number generator
in osmo-auc-gen utility.
Change-Id: I0241b814ea4c4ce1458f7ad76e31d390383c2048
Related: OS#1694
Add GSM23003_IMSI_MIN_DIGITS definition.
Add regression test gsm23003_test.c to test the two new functions.
Will be used by OsmoHLR to validate VTY and CTRL input.
Change-Id: I1e94f5b0717b947d2a7a7d36bacdf04a75cb3522
In many callers of the VTY API, we are lacking the vty_install_default() step
at certain node levels. This creates nodes that lack the 'exit' command, and
hence the only way to exit such a node is to restart the telnet session.
Historically, the VTY looked for missing commands on the immediate parent node,
and hence possibly found the parent's 'exit' command when the local node was
missing it. That is why we so far did not notice the missing default commands.
Furthermore, some callers call install_default() instead of
vty_install_default(). Only vty_install_default() also includes the 'exit' and
'end' commands. There is no reason why there are two sets of default commands.
To end this confusion, to catch all missing 'exit' commands and to prevent this
from re-appearing in the future, simply *always* install all default commands
implicitly when calling install_node().
In cmd_init(), there are some top-level nodes that apparently do not want the
default commands installed. Keep those the way they are, by changing the
invocation to new install_node_bare() ({VIEW,AUTH,AUTH_ENABLE}_NODE).
Make both install_default() and vty_install_default() no-ops so that users of
the API may still call them without harm. Do not yet deprecate yet, which
follows in Icf5d83f641e838cebcccc635a043e94ba352abff.
Drop all invocations to these two functions found in libosmocore.
Change-Id: I5021c64a787b63314e0f2f1cba0b8fc7bff4f09b
This change introduces a new command, which could be used to
inspect the application's talloc context directly from VTY.
To enable this feature, an application need to provide it's
context via the 'vty_app_info' struct, and register the VTY
command by calling the osmo_talloc_vty_add_cmds().
The new command is a sub-command of 'show':
show talloc-context <context> <depth> [filter]
Currently the following contexts may be inspected:
- application - a context provided by an application;
- null - all contexts, if NULL-context tracking is enabled.
A report depth is defined by the next parameter, and could be:
- full - full tree report, as the talloc_report_full() does;
- brief - brief tree report, as the talloc_report() does;
- DEPTH - user defined maximal report depth.
Also, there are two optional report filters:
- regexp - print only contexts, matching a regular expression;
- tree - print a specific context, pointed by specified address.
The command output is formatted the same way as in case of calling
the talloc_report() or talloc_report_full().
Change-Id: I43fc42880b22294d83c565ae600ac65e4f38b30d
The 'show online-help' produces XML output with <node id="..."> ids. We
reference those from the osmo-gsm-manuals.
Instead of numeric IDs coming from internal code, rather use a human-readable
node ID -- referencing id='config-msc' is much easier than referencing id='23'.
Add a char name[] to struct cmd_node, to hold this name. This may be provided
upon struct definition.
Since callers of the VTY API so far don't have a name yet, we would need to add
names everywhere to get meaningful node IDs. There is a way to get node ID
names without touching dependent code:
My first idea was to find out which command entered the node, i.e. command
'msc' enters the MSC_NODE. But it is impossible to derive which command entered
which node from data structs, it's hidden in the vty command definition.
But in fact all (TM) known API callers indeed provide a prompt string that
contains a logical and human readable string name. Thus, if the name is unset
in the struct, parse the prompt string and strip all "weird" characters to
obtain a node name from that. We can still set names later on, but for now will
have meaningful node IDs (e.g. 'config-msc' from '%s(config-msc)# ') without
touching any dependent code.
When VTY nodes get identical node names, which is quite possible, the XML
export de-dups these by appending _2, _3,... suffixes. The first occurence is
called e.g. 'name', the second 'name_2', then 'name_3', and so forth.
If a node has no name (even after parsing the prompt), it will be named merely
by the suffix. The first empty node will become id='_1', then '_2', '_3', and
so forth. This happens for nodes like VIEW_NODE or AUTH_NODE.
If this is merged, we need to adjust the references in osmo-gsm-manuals.git.
This can happen in our own time though, because we manually create the vty
reference xml and copy it to the osmo-gsm-manuals.git and then update the
references from the vty_additions.xml. This anyway has to happen because
currently the references tend to be hopelessly out of sync anyway, placing
comments at wildly unrelated VTY commands.
Change-Id: I8fa555570268b231c5e01727c661da92fad265de
Note: This will break users' config files if they do not use consistent
indenting. (see below for a definition of "consistent".)
When reading VTY commands from a file, use indenting as means to implicitly
exit child nodes. Do not look for commands in the parent node implicitly.
The VTY so far implies 'exit' commands if a VTY line cannot be parsed on the
current node, but succeeds on the parent node. That is the mechanism by which
our VTY config files do not need 'exit' at the end of each child node.
We've hit problems with this in the following scenarios, which will show
improved user experience after this patch:
*) When both a parent and its child node have commands with identical names:
cs7 instace 0
point-code 1.2.3
sccp-address osmo-msc
point-code 0.0.1
If I put the parent's command below the child, it is still interpreted in the
context of the child node:
cs7 instace 0
sccp-address osmo-msc
point-code 0.0.1
point-code 1.2.3
Though the indenting lets me assume I am setting the cs7 instance's global PC
to 1.2.3, I'm actually overwriting osmo-msc's PC with 1.2.3 and discarding the
0.0.1.
*) When a software change moves a VTY command from a child to a parent. Say
'timezone' moved from 'bts' to 'network' level:
network
timezone 1 2
Say a user still has an old config file with 'timezone' on the child level:
network
bts 0
timezone 1 2
trx 0
The user would expect an error message that 'timezone' is invalid on the 'bts'
level. Instead, the VTY finds the parent node's 'timezone', steps out of 'bts'
to the 'network' level, and instead says that the 'trx' command does not exist.
Format:
Consistent means that two adjacent indenting lines have the exact
same indenting characters for the common length:
Weird mix if you ask me, but correct and consistent:
ROOT
<space>PARENT
<space><tab><space>CHILD
<space><tab><space><tab><tab>GRANDCHILD
<space><tab><space><tab><tab>GRANDCHILD2
<space>SIBLING
Inconsistent:
ROOT
<space>PARENT
<tab><space>CHILD
<space><space><tab>GRANDCHILD
<space><tab><tab>GRANDCHILD2
<tab>SIBLING
Also, when going back to a parent level, the exact same indenting must be used
as before in that node:
Incorrect:
ROOT
<tab>PARENT
<tab><tab><tab>CHILD
<tab><tab>SIBLING
As not really intended side effect, it is also permitted to indent the entire
file starting from the root level. We could guard against it but there's no
harm:
Correct and consistent:
<tab>ROOT
<tab><tab>PARENT
<tab><tab><tab><tab>CHILD
<tab><tab>SIBLING
Implementation:
Track parent nodes state: whenever a command enters a child node, push a parent
node onto an llist to remember the exact indentation characters used for that
level.
As soon as the first line on a child node is parsed, remember this new
indentation (which must have a longer strlen() than its parent level) to apply
to all remaining child siblings and grandchildren.
If the amount of spaces that indent a following VTY command are less than this
expected indentation, call vty_go_parent() until it matches up.
At any level, if the common length of indentation characters mismatch, abort
parsing in error.
Transitions to child node are spread across VTY implementations and are hard to
change. But transitions to the parent node are all handled by vty_go_parent().
By popping a parent from the list of parents in vty_go_parent(), we can also
detect that a command has changed the node without changing the parent, hence
it must have stepped into a child node, and we can push a parent frame.
The behavior on the interactive telnet VTY remains unchanged.
Change-Id: I24cbb3f6de111f2d31110c3c484c066f1153aac9
Add OSMO_BIT_PRINT_EX() which is like OSMO_BIT_PRINT() but allows to
specify character to be printed for set bits. It's useful to print bytes
used as mask where set bit has particular semantics - for example TS
mask in OsmoPCU.
Change-Id: I72528bc1e376134c5a7b6e7a50c48e38c3f48b0a
Related: OS#2282
When doing UMTS AKA with AUTS, it can be interesting to know the SQN.MS that
was encoded in the AUTS. The only way to know this is to provide it as a
separate out-parameter from milenage_gen_vec_auts(), because the SQN.MS from
AUTS stored in umts.sqn is immediately modified non-trivially by
milenage_gen_vec(). Add sqn_ms to struct osmo_sub_auth_data to retain SQN.MS
even after a vector was generated.
Use this to print out SQN.MS for 'osmo-auc-gen -3 -A'.
Adjust test suite expectations.
Related: OS#2464
Change-Id: I9fc05bbf169d06716f40b995154fd42a3f91bef3
This basically follows the concept of osmo_timer_setup() and allows
the caller to fill-in all configurable fields of osmo_fd in one
line of code, rather than open-coding it in 5 lines everywhere.
Change-Id: I6dbf19ea22fd65302bfc5424c10418d1b7939094
In the Protocol Configuration Options IE (see 3GPP TS 24.008 10.5.6.3)
there is yet another new TLV format (derived from PPP IPCP/LCP/...)
which uses 16bit tag and 8bit length. Let's add functions so we can
generate related TLVs. Parsing is unfortunately not possible in our
existing structure as our tlv_parsed array only has 256 entries and
thus cannot cope with 16bit tags.
Change-Id: I9799130e2eba8fae8c4480fbb8a900c30232b694
PDCH is the physical channel, while actually we want to talk about
PDTCH the logical channel. Introduce backwards compatibility define.
Change-Id: Id6782d2247846e2db29fc58d98684970a66db948
In the course of splitting up the openbsc.git repository, we will create
libosmo-mgcp and need a library logging category for that purpose.
Change-Id: I09c587e2d59472cbde852d467d457254746d9e67
Using this option at socket creation, the caller can request disabling
the IP_MULTICAST_ALL socket option.
Change-Id: I5ab5de45c0b64ceb3636ea98245a23defa24ffd4
This introduces a new flag OSMO_SOCK_F_NO_MCAST_LOOP, which can be used
to disable the looping back of multicast packets transmitted throug this
socket to other local sockets on the machine.
As this looping-back is active by default, a single option to deviate
from the default is deemed sufficient.
Change-Id: I24a5b1ebc3f84d2d5d4734e54df50efaea26490b
This is a convenience helper that will both close a fd, mark it as
closed and unregister it from the event loop abstraction. In most
cases, you probably actually want to use it instead of manually closing
and calling osmo_fd_unregister().
Change-Id: Icd0933eed6a24edde7cdcb378e138897ecc5332c
Convert a given frame number into a printable string that displays
the sub components of the frame number.
Change-Id: I8015d2ded3940b01b35df7b72fc35c70c25e9926
These PRBS sequences are specified in ITU-T O.150. They are typically
used as test data to be transmitted for BER (bit error rate) testing.
Change-Id: I227b6a6e86a251460ecb816afa9a7439d5fb94d1
The PDP charging characteristics will be returned from the PDP
selection code and be used in the SGSN. It is following the same
approach as the QoS and PDP addr. It is a bit of a pity that we
have to define this in a different project.
Change-Id: I7815c5dfd7b7fb0ea78d816ebfb3abfbf0090afe
Add deprecation notice for public API use: it shouldn't be used outside
of libosmocore anyway.
Change-Id: I792e30dc44f027fd94e1f65af19fe08bac52b95c
Related: OS#71
These fields can be in the ISD and the PDP Context inofmration. Store
pointers to this IE in both cases. It needs to be used by the SGSN
when opening a PDP context.
Change-Id: Iedc7c02adcf77ca5c9545119e19c968dfbbb3e6b
Recent commit 3149b0d076 adds function
gsm0808_chan_type_to_speech_codec() but adds a completely mismatching name in
libosmogsm.map, as well as a definition with a typo in the name.
Fix the entry in libosmogsm.map.
Add the missing 'c' in gsm0808_utils.h
Change-Id: I5a621fa5ef6b632eabbe224f3dd383eacaffb695
Considering the various styles and implications found in the sources, edit
scores of files to follow the same API doc guidelines around the doxygen
grouping and the \file tag.
Many files now show a short description in the generated API doc that was so
far only available as C comment.
The guidelines and reasoning behind it is documented at
https://osmocom.org/projects/cellular-infrastructure/wiki/Guidelines_for_API_documentation
In some instances, remove file comments and add to the corresponding group
instead, to be shared among several files (e.g. bitvec).
Change-Id: Ifa70e77e90462b5eb2b0457c70fd25275910c72b
Move a longish comment to the timer group so that it appears in the API doc.
Un-doxygen some floating comments that were associated with unrelated code
items ('/**' --> '/*').
Add braces to some function names so that the API doc will render as reference
links.
Change-Id: I3ea5b88cbe9cb54702429158bf47e768e04e8fe7
Especially for short descriptions, it is annoying to have to type \brief for
every single API doc.
Drop all \brief and enable the AUTOBRIEF feature of doxygen, which always takes
the first sentence of an API doc as the brief description.
Change-Id: I11a8a821b065a128108641a2a63fb5a2b1916e87
Typically we don't place comments with the function declarations
in .h files. Not sure why this file has comments for each. The
API doc belongs in the .c file as proper doxygen comments,
and shouldn't be duplicated in the .h file.
In this particular case, doxygen comments are added in the
corresponding c file recently.
Change-Id: I5c4cb55be5ec59a6945b1720b875c5987f1cfaad
The contents of the speech codec element (struct gsm0808_speech_codec),
that is also used in the speech codec list element (struct
gsm0808_speech_codec_list) can be generated directly from the
permitted speech parameter in the channel type field (struct
gsm0808_channel_type) when full AoIP with compressed speech via
RTP/UDP/IP is assumed and when the codec configuration on the air
interface exactly matches the codec configuration on the IP backhaul.
This patch adds a function that can be used as a helper to fill
out spech codec fields by only giving a permitted speech parameter
as input.
Change-Id: I257c972e9fdf0dfe940a8d483447085bd62e50a2