The BLOCK and BLOCK ACK PDUs can be send over a working NSVC to inform
the NSE that a NSVC is blocked.
Change-Id: I6189229fdc1f054e86811bc60cb7646e1f758a78
To show adminstrator the last state change of a nsvc add a timestamp and
show it on the vty
> show ns nsei 1234
NSEI 01234: UDP, DEAD since 0d 0h 1m 42s
[...]
4 NS-VC:
UNBLOCKED DYNAMIC sig_weight=1 data_weight=1 udp)[127.0.0.1]:22000<>[127.0.0.1]:23001 ALIVE since 0d 0h 0m 1s
UNBLOCKED DYNAMIC sig_weight=2 data_weight=2 udp)[127.0.0.1]:22000<>[127.0.0.1]:23000 ALIVE since 0d 0h 0m 1s
UNBLOCKED DYNAMIC sig_weight=2 data_weight=2 udp)[127.0.0.1]:22001<>[127.0.0.1]:23000 ALIVE since 0d 0h 0m 1s
UNBLOCKED DYNAMIC sig_weight=1 data_weight=1 udp)[127.0.0.1]:22001<>[127.0.0.1]:23001 ALIVE since 0d 0h 0m 1s
Related: OS#5028
Change-Id: Ie3a039a209869295afa5feda39297cee81fedf22
To show adminstrator the last state change of a nse add a timestamp and
show it on the vty
> show ns nse 1234
NSEI 01234: UDP, ALIVE since 0d 0h 0m 16s
FSM Instance Name: 'GPRS-NS2-SNS-SGSN(NSE01234-SNS)[0x6120000012a0]', ID: 'NSE01234-SNS'
Log-Level: 'DEBUG', State: 'CONFIGURED'
Timer: 4
Maximum number of remote NS-VCs: 8, IPv4 Endpoints: 2, IPv6 Endpoints: 0
[...]
Related: OS#5028
Change-Id: I8143080a3c5c9a55d37dfad44ba2ac6561daa216
When changing the bind ip-sns weight, initiate a
SNS CHANGE WEIGHT procedure to inform the other side.
Related: OS#5036
Change-Id: Icec4dabb46bc198f68f91bfe09ba279fbe68d454
The FR code is using force unconfigured to change the state of the NSVC
when the FR link goes down. The force unconfigured state didn't
notified the NSE when changing into this state.
Related: SYS#5533
Change-Id: I4d7bbbbce26f7cde99eebe96995c50b1e812e5bd
If the NSVCI is valid, there is no signalling or data weight defined (internally this is 1).
For NSVC with NSVCI don't print the signalling or data weight.
For NSVC without NSVCI, don't print NSVCI at all.
Related: OS#5180
Change-Id: Iaadc806a9136436468e2b02eb0bc1f4570a10ecc
gprs_ns2_free_bind() takes care of all required steps to clean up a bind.
The driver->free_bind() operation only cleans up the driver internal state
but not NSVCs and other generic things.
Fixes a crash when free'ing a bind from the vty which has active NSVCs.
Related: OS#5195
Change-Id: I0a2ad22905bcacb929b9b5f5b034af0da3081826
When the MTU changes for any fr device, all
NSE will recalculate their MTU. If any NSE is alive,
libosmocore will crash.
Related: OS#5192
Change-Id: I31ba5cefea7bbb0b74060d6664b42c58815ee2a1
The NSE wasn't notified when a NSVC went into the BLOCKED state from
an UNBLOCKED state.
Related: OS#5182
Change-Id: I09634e414e9bb966e6b5809b7de1b59fbabd413d
When configuring multiple NSE/BINDs the order of the configuration
should be keeped.
Related: OS#5181
Change-Id: Ibbc03f0780b49543b5bd97ee059f11cfd6c2a126
The binds also print a list of associated NSVC when
dumping the bind.
However the binds using their own representation of
printing the NSVC which is different to `show ns entities`.
Use the same function to print NS-VC.
Before:
NSVCI 00000: udp)[127.0.0.1]:23000<>[127.0.0.1]:22000
After:
NSVCI none: UNCONFIGURED DYNAMIC data_weight=1 sig_weight=1 udp)[127.0.0.1]:23000<>[127.0.0.1]:22000
Change-Id: If31ec6c1c07dc134ab1ddeb915bc89747c7be048
Seen building on RPI4 32 bits raspbian:
error: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘size_t’ {aka ‘unsigned int’} [-Werror=format=]
Change-Id: I62199bfc7f3a78403334f5580f31fa5743223c9b
Let's use log_set_print_filename2() API instead, which has less ackward
behavior implications like changing the print status of category-hex.
Related: OS#5034
Change-Id: Ifc78e1dcba5baf0b41f6ccbbbd1e3f06552d73da
This will alow easily changing default values for print_category vs
print_category_hex later.
In any case, every test relying on logging output validation should
always explicitly state the config to avoid issues in the future if
default values change.
Related: OS#5034
Change-Id: If29b40557d5c2bcda04b964f344070bad58d8f28
Implement the load sharing based on modulo of the LSP. As long the gprs_ns2 doesn't
support the resource distribution function (48.016 § 4.4a) this simple
approach is good enought.
Fixes: OS#4836
Change-Id: I8c2fe5d647694886ac600470fca6ea5d5d210a85
Introduce a `ip-sns-bind BINDID` vty command within a `nse` vty object.
The ip-sns-bind defines the binds which will be used by the dynamic
configuration with IP-SNS.
This is only the first part which only uses the binds when doing a
new SNS configuration.
The outgoing add procedure will be supported in a later patch
when the SNS fsm supports outgoing procedures.
This is a behaviour change of the API and must be synchronized with
the osmo-pcu. Otherwise SNS won't work with osmo-pcu.
Related: SYS#5354
Change-Id: I9ab8092bf286e7d90e92f5702a5404425e959c84
The BSSGP layer needs to know the MTU of the NS UNIDATA payload.
The MTU can be 0 if the NSE doesn't contain any NSVC.
Every status indication will contain the mtu value.
The MTU in the status indication contains the maximum transfer
unit of a BSSGP message. From NS side the maximum SDU.
Related: OS#4889
Change-Id: I5016b295db6185ec131d83089cf6c806e34ef1b6
write config will not print out any configuration for bind/nse unless we
configure some. This way we can catch more issues with incompatible
configs such as https://gerrit.osmocom.org/c/libosmocore/+/22878
Change-Id: Iad422ee013c82a6cb96af8ce4eb3af8b0936a4c9
Related: OS#4887
Allow to assign a signalling and data weight to UDP binds.
Those weights will be used when doing dynamic configuration over
IP-SNS.
This is only the first part which only uses the assigned weights
when doing a new SNS configuration.
The outgoing change weight procedure will be supported in a later patch
when the SNS fsm supports outgoing procedures.
Related: SYS#5354
Change-Id: I5133e4229377d44772a9af28628a2bc420fea34b
Avoid code duplication between three different drivers by sharing
the "core" of the bind initialization in a new, shared ns2_bind_alloc().
Change-Id: I535fc68e94fcd695de827dd922706adc1c5a2cb7
All public enum should have the prefix GPRS_NS2_.
API change which must be synchronized with osmo-pcu,
osmo-gbproxy, osmo-sgsn.
Change-Id: I548ff12f7277cbb7e1a630a3dc02b738ce89be72
All functions which are exposed by gprs_ns2_internal.h should not contain
the public prefix gprs_. Internal function should only contain ns2_ prefix.
Change-Id: Icecc5a918902cd10efac72bbac20780d39aab272
[ 352s] gb/gprs_ns2_test.c: In function 'test_block_unblock_nsvc':
[ 352s] gb/gprs_ns2_test.c:200:2: error: 'for' loop initial declarations are only allowed in C99 or C11 mode
[ 352s] for (int i=0; i<2; i++) {
[ 352s] ^
[ 352s] gb/gprs_ns2_test.c:200:2: note: use option -std=c99, -std=gnu99, -std=c11 or -std=gnu11 to compile your code
Change-Id: I72310886bef4db635078b75715c9d98ee45391cc
The vty should be able to block or unblock a specific NSVC.
Further more this case is special for the UNITDATA as those
can be still received until the other side response to the BLOCK PDU.
Related: OS#4939
Change-Id: Ic0ce3c5fabc8644cc1ee71a8f6dd783fadf7b84d
free_bind() should free up all driver specific state but NOT
the bind itself. As the only thing left is clearing the pdus
rename the function to it.
Change-Id: Iac506734c93aca8be045ac13788d07d1bdc78eb3
The function bssgp_parse_rim_ri() and bssgp_create_rim_ri() are located
in gprs_bssgp.c, since there is now a gprs_bssgp_rim.c module it makes
more sense to put them there. Also adjust the code a bit so that its
more intuitive to read.
Change-Id: Icd667f41d5735de56cd9fb257670337c679dd258
Related: SYS#5103
BSSGP RIM uses a number of nested containers to signal RIM application
specific payload information in a generic way. Lets add the container
structurs required for NACC.
Depends: libosmocore If48f412c32e8e5a3e604a78d12b74787a4786374
Change-Id: Ibbc7fd67658e3040c12abb5706fe9d1f31894352
Related: SYS#5103
A dummy client to do integration tests of the ns2 layer.
It drop all unit data. But allows vty tests.
Change-Id: I127c178426bc1a3da8de251740eda93853030d6d
The RIM Routing Information IE (see also 3GPP TS 48.018, section
11.3.70) is used to control the flow of BSSGP rim messages at the SGSN.
Change-Id: I6f88a9aeeb50a612d32e9efd23040c9740bc4f11
Related: SYS#5103
This function performs sending a NS-ALIVE PDU and starting Tns-Test,
let's use it in all places where we used to do that.
As part of this, also fix a bug where the sendto() return value (number
of bytes sent) would actually propagate up all the way to
gprs_ns_rx_reset() return value, which in turn affects the test results
on stdout.
Change-Id: I4d303117f77fabb74bbb91887b9914a81c2a084a
In gprs_ns_process_msg(), we were dispatching the S_NS_UNBLOCK
signal before sending out the NS_POUT_UNBLOCK_ACK message.
Signal handlers might send messages to the other side, assuming
that NS is now unblocked. However, since such messages will arrive
before the UNBLOCK_ACK message the receiver might discard them.
This problem has been observed with our TTCN3 BSSGP_Emulation
as a peer to osmo-pcu.
This patch makes TTCN3 PCU TC_paging() test pass regardless of
whether the test or osmo-pcu is started first. Before this patch,
this test would only pass if the test was started before osmo-pcu.
A remaining problem is that the test does not yet keep passing
reliably unless osmo-pcu is restarted between test runs.
Change-Id: I3af54a14bb6bcfa167c9a9d9f67835e7f5b9f1bb
Related: OS#2890
Related: OS#2388
Ironically, when deprecating osmo_init_logging() in
I216837780e9405fdaec8059c63d10699c695b360, I forgot to change the callers
within libosmocore itself, i.e. in the various regression tests.
Change-Id: Ia36c248f99353d5baaa2533f46a2f60a8579bdf8
All successful and all error code paths of bssgp_fc_in() free the msgb, except
the code path calling fc_enqueue() when the msg is dropped (due to queue being
full, or failure to allocate).
Callers could theoretically catch the -ENOSPC return value and discard the
msgb. However, in other code paths, a callback's return value is returned,
which is expected to free the msgb, so such callback would have to never return
-ENOSPC when it freed the msgb. Much simpler semantics would be to free the
msgb in every code path, no matter which kind of error occurred.
Who is currently calling bssgp_fc_in and how do they handle the return value?
- bssgp_fc_test.c ignores the return value (and hits a mem leak aka sanitizer
build failure if the queue is full).
- fc_timer_cb() ignores the return value.
- bssgp_tx_dl_ud() returns the bssgp_fc_in() rc.
- which is returned by a cascade of functions leading up to being returned,
for example, by gprs_llgmm_reset(), which is usually called with ignored
return code.
At this point it is already fairly clear that bssgp_fc_in() should always free
the msgb, since the callers don't seem to distinguish even between error or
success, let alone between -ENOSPC or other errors.
bssgp_fc_test: assert that no msgbs remain unfreed after the tests.
Adjust expected results.
Helps fix sanitizer build on debian 9.
Change-Id: I00c62a104baeaad6a85883c380259c469aebf0df
Print remaining msgbs when done, then free the entire tall_msgb_context. To be
able to do that, call msgb_talloc_ctx_init() and use its return value.
A subsequent patch will fix a known mem leak and add assertions for 0b in 1
blocks remaining in the tall_msgb_context.
Helps fix sanitizer build on debian 9.
Change-Id: I67d347ab2642b0bfc27b21b44231a7f3146ff641
Alexander Couzens
Pau Espin
Harald Welte
Daniel Willmann
Philipp Maier