The initially merged IuUP API and implementation assumed that RFCI with
ID was always in the position of its ID inside the list of RFCIs. This
was the case for messages sent by ip.access nano3g as well as our own
osmocom implementation. However it was noticed that other nodes from
other vendors actually use other order, as allowed by the IuUP message
format.
Hence, we need to break the assumption and provide explicit ID
information in the list.
NOTICE: This commit breaks API and ABI compatibility with older versions
of libosmogsm, but not with any previous release of libosmocore since
the API is only available in master so far (it was added in
9fe1f9fb0b).
Similary, it's only user (osmo-mgw) only uses the API in master, so
there's no API breakage with older releases.
Related: SYS#5969
Change-Id: Ib21cee2e30bf83dff4e167f79541796007af9845
It was recently found that several IEs which were added in the header
file were not actually added to the tlv_definition, and hence the tlv
parser failed to decode them. Let's make sure we don't foget to add new
IEs in the future.
Related: SYS#5915
Change-Id: Id8a679ca43eb0fcc4882780e9a95ec21c7f51972
Those are available in 3GPP TS 48.008 version 16.0.0 Release 16, section
3.2.2.17 Cell Identifier. It can be seen that we have a collision
between the osmocom non-standard format and the SAI standard one.
This is because CGI-PS is not really a TS 48.008 Cell Identifier, but only
specified in TS 48.018 and has no ID number assigned. The CGI-PS was
added there because the whole osmo-bsc neighbour configuration works
with CellIds to manage neighbours, so it felt natural to extend the APIs
to also provide means to use CGI-PS format (TS 48.018 even refers 48.008
existance and mentions there's no explicit ID).
At the time this Cell Identifier was added, the firstly available number
(11) was taken, which was of course a really bad idea since newer
versions of the spec can at some point use it, which is the case if one
checks for instance TS 48.008 Release 16 SAI Cell Id.
There no perfect way to fix this bad decision at the time, but the
CGI-PS is only used in osmo-bsc and only for RIM related purposes, so by
changing the ID of CELL_IDENT_WHOLE_GLOBAL_PS, we only break RIM under
some specific CIs being used, and when an osmo-bsc is built against
older libosmocore and then used at runtime against a newer libosmocore
(which should be rare).
Hence, the downside is acceptable, and by moving the new ID number to be
ouside of the spec proto TS 48.008 range (4 bits), we make sure we don't
have the same problem again in the future.
Related: SYS#5838
Fixes: ca33a71ca8
Change-Id: Id25e563febdb7640174540136225f399515a0089
This allows init-passive users to get the configured sizes for the RFCIs
and other similar information once engotiated with the peer.
Realted: OS#1937
Change-Id: I63ee780b4aa162ea097410b234e73984000c0965
Only support for SMpSDU mode is introduced in this commit.
Not supported explicit list:
- Transparent mode
- ATM/AAL2 based Transport layer
- GTP-U based Transport Layer
- Iu Rate Control procedure
- Time Alignment procedure
APIs are provided to allocate the primitives properly inside the related
msgb. This way primitives can be placed in the headroom, leaving the
data part of the msgb for the IuUP payload, hence allowing re-use of the
msgb and 0 copy of IuUP payload when forwarding data over RNL<->TNL.
Since RNL and TNL primitives relu struct osmo_prim_header, which is not
packed, they cannot be set to packed, and hence proper memory alignment
in the msgb must be done to avoid misaligned accesses (Asan errors about
it otherwise).
Related: SYS#5516
Change-Id: Ibe356fa7b1abaca0091e368db8478e79c09c6cb0
This way the related files are not changed when running the script to
generate struct fields for big endian systems.
Change-Id: I830e0961331a73f8dceb1a5a1c879798541752fd
Remove the paragraph about writing to the Free Software Foundation's
mailing address. The FSF has changed addresses in the past, and may do
so again. In 2021 this is not useful, let's rather have a bit less
boilerplate at the start of source files.
Change-Id: I5050285e75cf120407a1d883e99b3c4bcae8ffd7
Without this header, both OSMO_IS_{BIG,LITTLE}_ENDIAN macros are
not defined, and thus the 'struct gsm_sacch_l1_hdr' is empty.
Change-Id: I2c14a1b898fdb743191dab0e6be157ce916e8161
This change adds new [bit-]fields in order to allow:
* selectively enabling SACCH and/or FACCH,
* setting the RxQual (BER) threshold.
Change-Id: Ia28293a12de0af71f55e701fb65c46e905dae217
Related: SYS#5319
Some deprecated functions are still used in libosmocore .c code. Use
OSMO_DEPRECATED_OUTSIDE() to get rid of those "resident warnings".
Change-Id: I6e79acc87be37ac1aaec900e737e41450b46826a
This commit adds new Osmocom specific IEs required to pass C/I related
Power Control Parameters osmo-bsc => osmo-bts to be used by the MS Power
Control Loop being implemented.
Related: SYS#4917
Change-Id: Iffef0611430ad6c90606149c398d80158633bbca
To indicate to the BSC that a BTS supports temporary overpower of
SACCH/FACCH channels a new feature BTS_FEAT_ACCH_TOP is added.
Change-Id: I62fbfc30acd5d67b20727b75a8f256e6b5d31e06
Related: SYS#5319
To transfer the temporary overpower value from the BSC to the BTS, a new
RSL IE (RSL_IE_OSMO_TOP_ACCH_CAP) is added.
Change-Id: I31c5be4bceb9140d63ab8e2f197f0acc68699426
Related: SYS#5319
This feature signals support to configure Osmocom Dynamic Timeslot type
as SDCCH8, on top of historically supported TCH/H and TCH/F.
The idea is that when unneeded, the TS is configured as PDCH, and as
soon as there's need for an SDCCH and there's none available, the TS is
dynamically reconfigured to SDCCH8. Once all logical channels in the
dynamic TS are released and hence becomes free, the BSC will reconfigure
it to PDCH.
Related: SYS#5309
Change-Id: Ifc0ca8916bd3e93e5a60a7dd7391d2588fdb5532
They will gain support to be activated as SDCCH/8 soon too. Since new
name would start to be too large, use a more generic naming for it.
Related: OS#5309
Change-Id: I56dcfe4d17899630b17f80145c3ced72f1e91e68
Prepare for A5/4 support in osmo-msc.
Add new function gsm0808_create_cipher2() which takes a struct as
argument instead of individual fields. This is akin to e.g.
gsm0808_create_handover_request() below in the file, and allows
backwards compatibly extending the argument list without needing a new
function signature every time.
Add struct gsm0808_cipher_mode_command, as argument list for
gsm0808_create_cipher2(), with kc128 included.
Encode the Kc128 IE in gsm0808_create_cipher2().
Implement gsm0808_create_cipher() by calling gsm0808_create_cipher2().
Change-Id: Ib3906085e0c6e5a496a9f755f0f786238a86ca34
This feature provides the BSC with information on whether the BTS talks
the IPAC_PROTO_EXT_PCU osmocom extension over the underlying IPA
multiplex of the OML link.
Related: SYS#5303
Change-Id: Id62421f7f5540875ac877a187757f2cf0556bd02
This new extension protocol is used to forward Osmocom PCUIF messages
BSC<->BTS<->PCU.
It will be sent re-using the IPA multiplex of the OML link between
BSC and BTS. BTS is responsible for forwarding the message over the unix
socket to the PCU.
Related: SYS#5303
Change-Id: I68b04def49946b6915dbd4e476999f249751cd28
Applying and reverting this mask allows one to quickly convert
between VAMOS and non-VAMOS variants of Bm/Lm C-bits.
Change-Id: Ia0bd8695a3f12331b696fe69117189cdd48b584d
Related: SYS#4895, OS#4941, SYS#5315, OS#4940
Defined in 48.018 10.5.2.82.
This will be used by Channel Mode Modify for VAMOS.
Related: SYS#4895 SYS#5315
Change-Id: I9bad6e7121af43dfa9706635e58279ce672a4e14
Also add functions to convert between VAMOS and non-VAMOS speech modes.
Related: SYS#4895 SYS#5315
Change-Id: Ie0ea592da5610ae70290106d004e549cf3212a89
The Signalling Field Element Coding list defined in 3.2.3 is used in
"Old BSS to New BSS Information" and "New BSS to old BSS Information"
IEs. However, the former IE (Old->New Info) defines 2 extra Field
Elements in 3.2.2.58 (3GPP TS 48.008 version 16.0.0 Release 16) not
present in 3.2.3.
Related: SYS#5337
Change-Id: I4db3f7974887e4c798a30c5b51a19472ceeee27d
Pau Espin
Vadim Yanitskiy
Neels Hofmeyr
Harald Welte
Oliver Smith
Keith Whyte
Philipp Maier
Neels Hofmeyr