Keith of Rhizomatica has an issue of a unrejected interrogateSS.
Start with just decoding the message and printing the empty test
and the code.
What is kind of missing is the classification between invoke,
returnResult and returnResultLast that we need to add in the
long run.
Change-Id: Iadfa156707a96f2a34f3948c7cc9a74435f17114
Corresponding test code include both official test vectors from the
specs and data from over-the-air tests.
This obsoletes libosmo-crypt-a53 as it was last missing piece
unimplemented in libosmogsm.
Change-Id: I939e4f6b91b4a7c591ef3761fe2d46ed1c2fb2d3
Related: OS#1582
Check if library actually support Milenage, COMP128 v2 and v3 algorithms
instead of just printing enum values or nothing.
Change-Id: I2b98481f56a8381058d4b29db5e8a36eb193eee9
The actual code is from OsmoBTS' tch.c by Harald Welte. Add unit tests,
doxygen annotation and extra memory safety check. Those functions are
used in several BTS implementations but seems generic enough to be
generally useful.
Change-Id: I2b1901c4161e8035f059585901dca593b661556d
This code is supposed to formalize some of the state machine handling in
Osmocom code.
Change-Id: I0b0965a912598c1f6b84042a99fea9d522642466
Reviewed-on: https://gerrit.osmocom.org/163
Tested-by: Jenkins Builder
Reviewed-by: Harald Welte <laforge@gnumonks.org>
Add functions which check if given FR or HR frame (packed in RTP)
contains SID (SIlence Descriptor) and corresponding tests.
Related: OS#22
Change-Id: I4051e3c0d4fb9ee93d7e9e0ef4abaf9f18e227ca
Reviewed-on: https://gerrit.osmocom.org/160
Tested-by: Jenkins Builder
Reviewed-by: Harald Welte <laforge@gnumonks.org>
* add functions to encode/decode various codec paramters from RTP payload with
AMR frame according to RFC 4867
* those functions are extended version based on code from osmo-bts'
amr.c by Andreas Eversberg
* add corresponding enum types and strings for logging
* add regression tests
It's useful both to replace manual parsing in osmo-bts with fuctions
covered by test suite and as a debugging helpers for issues related to
AMR.
Change-Id: Ia217679a07d3fbc970f435e20f6eac33d34bd597
Related: OS#1562
Reviewed-on: https://gerrit.osmocom.org/118
Tested-by: Jenkins Builder
Reviewed-by: Holger Freyther <holger@freyther.de>
Move those routines from OpenBSC to libosmogsm, so they can be
re-used from other programs. I think it was a mistake to add them only
inside the openbsc repository in the first place. We need to pay more
attention to this in the future.
Add python utility to generate .c code with convolutional
encoder/decoder based on polynomial description of the code. If argument
given it'll be interpreted as intended output directory, otherwise
current working directory is used.
Codes for *CCH, CS2/3 and TCH/AFS are generated. Corresponding manual
implementations are removed from tests. This introduce build-time
dependency on python.
The main work for this patch was generously contributed by Sylvain
Munaut.
Fixes: OS#1629
Add function which adds specified number of bits from each element of
array to the bit vector prefixing each addition with one and finishing
entire sequence with adding 0. This is very common patter for various
repetitive data structures described with CSN.1 in 3GPP standards.
Corresponding test vectors and doxygen headers are added too.
There doesn't seem to be a reason not to check the filter. Update
and extend the test. Currently the filter function will be called
once for the log check and once for the output of it.
This commit adds OSMO_ASSERTs for mandatory conditions related to
log_check_level, and fprintfs for optional conditions, since it is
always safe for log_check_level to return != 0.
Sponsored-by: On-Waves ehf
It's sometimes handy for debugging to be able to immediately see which
bits are set in a given byte. Generalize macro used for that in bitvec
tests and make it available for the rest of the library.
This function originates from openbsc/src/gprs but is just specific
to BSSGP/Gb on the same level like bssgp_msgb_alloc.
This commit puts the former gprs_msgb_copy function beside
bssgp_msgb_alloc.
Renamed function:
gprs_msgb_copy -> bssgp_msgb_copy
Sponsored-by: On-Waves ehf
Add bit map encoder and decoder functions: decoder is fully functional
while encoder is good enough for testing - no backtracking to find
the best possible compression is implemented. If somebody is willing to
implement MS side of EDGE than this has to be expanded.
Add corresponding tests.
N. B: the encoding is implemented according to ETSI TS 44.060 which is
slightly different from T4 used for fax according to CCITT G31D (RFC 804).
Ticket: OW#2407
Sponsored-by: On-Waves ehf
Signed-off-by: Max <msuraev@sysmocom.de>
osmo_hexdump_nospc/osmo_hexdump is an old school C routine with a
static internal array. This means that printf will most likely one
of the two strings twice. For Linux/glibc this is the first string
(for whatever reason?) and for FreeBSD it is the last call of the
osmo_hexdump_nospc. We could have noticed by both strings being
of the same length besides the different length input. The second
issue is that we cast a hexstring to uint8_t and dump the string
as hex. So the two strings should not match at all.
Fix it by printing the hex string as plain hex and separating the
two printf calls. Update the test output.
bitvec_read_field/bitvec_write_field in the PCU used a C++ reference
and when porting to C it was decided to pass the parameter by value
and this lost the "back propagation" of the new index. Change the
parameter to be an in/out parameter and this way do not have a silent
semantic break in the osmo-pcu (where we copy the reference in csn.1
by value) and have a true compile failure.
Add Max's simple test for bitvec_unhex function leaving the checking
of bitvec_read_field and the side effect in the datastructure about
the number of bits still open.
Currently the msgb error handling cannot be fully tested, since in
many cases osmo_panic will be called. This will in turn call abort().
Using an osmo_panic_handler that just returns will not help, since
many msgb functions rely on MSGB_ABORT to not return at all.
This commit uses an alternative osmo_panic_raise handler that just
calls longjmp to return to the test function.
Since some of this activity is logged to stderr where the strings may
contain variable parts like pointer addresses, stderr checking is
disabled in testsuite.at.
Sponsored-by: On-Waves ehf
This tests several API functions of the msgb by checking the
invariant and by dumping resulting message buffers as hex.
Sponsored-by: On-Waves ehf
Conflicts:
tests/Makefile.am
The new functions bitvec_get_bytes and bitvec_set_bytes copy
byte sequences from bitvecs to uint8_t arrays and vice versa.
While the bytes in the bitvecs do not need to be aligned, the uint8_t
arrays always are. In case the bytes in the bitvec are aligned, the
implementation uses memcpy.
Note that the implementation like the other existing functions assume
MSB first encoding.
[hfreyther: Squash the comment fix into this commit as well]
Sponsored-by: On-Waves ehf
These functions are currently part of openbsc but also needed by
other projects.
The function have been renamed as follows:
gprs_apn_to_str -> osmo_apn_to_str
gprs_str_to_apn -> osmo_apn_from_str
Sponsored-by: On-Waves ehf
Currently the state is assumed to remain the same while the reset
procedure is active. While this works correctly in general, a single
unexpected BLOCK_ACK or UNBLOCK_ACK can change the state but will not
stop the reset procedure. The leads to repeated RESET messages, where
the corresponding RESET_ACK is ignored. This is a stable state which
can only be left by manual intervention or by reception of a RESET
message from the peer.
This commit changes the RESET timeout handler to set the state to
BLOCKED/RESET when sending the new NS RESET message.
Note that this should ensure a clean restart even if the state has been
screwed up. It does not fix the handling of BLOCK_ACK or UNBLOCK_ACK
in abnormal cases.
Addresses:
gprs_ns.c:349 NSEI=8895 Tx NS RESET (NSVCI=8895, cause=O&M intervention)
gprs_ns.c:878 NSVCI=8895 Rx NS RESET ACK (NSEI=8895, NSVCI=8895)
gprs_ns.c:887 NS RESET ACK Discarding unexpected message for NS-VCI 8895 from SGSN NSEI=8895
Ticket: OW#1551
Sponsored-by: On-Waves ehf
Shipping our own private copy of talloc was a good idea in 2008,
when it was not readily available on most target platforms. Today,
the situation is quite different, as it is a standard library on
major Linux distributions.
This tests uses a dedicated test reported to check several aspects of
the value reporting.
- addition/removal of stats reporter
- addition/removal of counters/items
- setting of max_class
- initial value flush
- updating single counters/items
- reporter retrieval
- enable/disable
Sponsored-by: On-Waves ehf
Currently this is part of the only test function that uses the
vty directly.
In preperation for more such test cases, this commit moves this code
into separate functions.
Sponsored-by: On-Waves ehf
The addition of libosmovty.la to several test cases as done in
commit 738d9e2210 (stats: Add vty_out_stat_item_group)
is not needed.
This commit removes them.
Sponsored-by: On-Waves ehf
Since the the stat_item and stats functions and data types are meant
to be exported, they get an osmo_ prefix.
Sponsored-by: On-Waves ehf
[hfreyther: Prepended the enum values too. This was requested by
Jacob]
This commit provides stats configuration similar to the log
configuration.
The following vty commands are added to the config node:
stats reporter statsd Create/Modify a statsd reporter
no stats reporter statsd Remove a statsd reporter
To actually configure a reporter, the config-stats node is entered
when the "stats reporter" command has succeeded. The following new
vty commands are available there:
local-ip ADDR Set the IP address to which we bind locally
no local-ip Do not bind to a certain IP address
remote-ip ADDR Set the remote IP address to which we connect
remote-port <1-65535> Set the remote port to which we connect
prefix PREFIX Set the item/counter name prefix
no prefix Do not use a prefix
enable Enable the reporter
disable Disable the reporter
Sponsored-by: On-Waves ehf
Currently each stat item has a separate index value which basically
counts each single value added to the item and which can be used by
a reporter to get all new values that have not been reported yet.
The drawback is, that such an index must be stored for each stat
item.
This commit introduces a global index which is incremented for each
new stat item value. This index is then stored together with the item
value. So a single stored index per reporter is sufficient to make
sure that only new values are reported.
Sponsored-by: On-Waves ehf
This commit adds instrumentation function to gather measurement
and statistical values similar to counter groups.
Multiple values can be stored per item, which can be retrieved in
FIFO order. Getting values from the item does not modify its state to
allow for multiple independant backends (e.g. VTY and statd).
When a new value is set, the oldest value gets silently overwritten.
Lost values are skipped when getting values from the item.
Sponsored-by: On-Waves ehf
When using configure --disable-static, no libosmogsm.a will be
created, and the tests fail to link because symbols like _a5_3 and
_a5_4 are not exported through the only remaining libosmogsm.so.
A method to overcome this is an intermediate private non-distributed
library, examples of which are present in e.g. libabc, kmod and
systemd.
With this, disable-static can now be the default and practical compile
time be halved.
For some reason the structure is closer to be a LV (length
and value). The value is actually a tag but it is counted
inside the length. Introduce an overload of the parse function
to provide an offset for the length. This will be taken from
the returned length.
In file included from ../../include/osmocom/core/msgb.h:25:0,
from ../../tests/sms/sms_test.c:31:
../../include/osmocom/core/bits.h:6:35: fatal error: osmocom/core/bit16gen.h: No such file or directory
#include <osmocom/core/bit16gen.h>
Currently large values for Bmax default MS get sliced since a uint16_t is
used as the type of the corresponding parameter of bssgp_tx_fc_bvc.
GSM 48.018, 11.3.2 which in turn refers to 11.3.5 specifies a maximum
of 6MB (0xffff * 100).
This commit changes the type to uint32_t to cover the full value
range.
Sponsored-by: On-Waves ehf
The fix in the commit "bssgp: Fix call to llist_entry in
fc_queue_timer_cfg" prevents the flow control code from generating
certain logging messages ("-BSSGP-FC: fc_timer_cb() but still not
able to send PDU of 10 bytes") during the tests. This breaks the test
suite, since the update of the correseponding stderr output file
misses.
This commit updates the bssgp_fc_tests.err file accordingly.
Sponsored-by: On-Waves ehf
loggingrb/loggingrb_test.c:76:18: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
fprintf(stderr, log_target_rb_get(ringbuf_target, 0));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
loggingrb/loggingrb_test.c:77:18: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
fprintf(stderr, log_target_rb_get(ringbuf_target, 1));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Holger Hans Peter Freyther
Harald Welte
Sylvain Munaut