When using 'check_PROGRAMS', autoconf/automake generates smarter
Makefiles, so that the test programs are not being compiled during
the normal 'make all', but only during 'make check'.
Change-Id: Icca22778831b043358acf0482948dbff32a11256
Otherwise when configuring ss7 instances in numerical order in the VTY
and then printing the VTY configuration they end up ordered this way:
cs7 instance 2
cs7 instance 1
cs7 instance 0
Related: SYS#5912
Change-Id: Id4d0a20cc5b0811b505b2d1051d496f8bd17d54c
Remove the paragraph about writing to the Free Software Foundation's
mailing address. The FSF has changed addresses in the past, and may do
so again. In 2021 this is not useful, let's rather have a bit less
boilerplate at the start of source files.
Change-Id: Ia450b630e0b60b38835f599c93985bbe97c50d2f
When libosmo-sigtran runs in ASP role, then the entire routing table
introspection (show) and routing table configuration VTY commands are
not present. Editing the routing table manually only makes sense in SG
role, but it is still useful to be able to inspect the routing table in
ASP and SG mode.
Change-Id: Ieaef4f0344b5b77ff5047013e9da1e938004e97c
Related: SYS#5392
This reverts commit 0b39f2cf7b.
Reason for revert:
Breaks ttcn test suites (at least for osmo-bsc) with osmo-stp error log:
"MTP-TRANSFER.req for DPC 187: no route!"
The breakage is fixed by only reverting the NULL -> "localhost" change
back to NULL. But the commit log indicated a reason for this, so rather
reverting the entire commit for now.
Change-Id: Ia97832f4e3ed646457d5c6eeba27352f1153edec
In osmo_ss7_vty_go_parent, "127.0.0.1" is changed to "localhost" to let
local NSS decide whether to use IPv4 or IPv6. In newish systems, IPv6
::1 will be selected since IPv6 takes precedence over IPv4.
Similarly, the default source addr needs to be changed from NULL to "localhost"
since for some yet unknwon reason, getaddrinfo(AF_UNSPEC, NULL) returns
first IPv4 "0.0.0.0" and later "::", which is inconsistent with
getaddrinfo("localhost") result, resulting in src=IPv4(0.0.0.0) and
dst=IPv6(::1), which is incompatible and will fail.
In any case, this change doesn't affect users of osmo_sccp_simple_client
because the APIs set both src and dst addresses.
Change-Id: I69c48819b70635c92fa404cafd917af7802d517c
Depends: libosmo-netif.git Change-Id Ie6bb17a9af6ca21d5e350f9c9d2d74c97c5a00af
As per RFC4666 it is optional whether or not a traffic-mode IE is
part of ASPAC requests from ASP to SG. We implemented that so far
by having none as default, unless the user specified an explicit
traffic-mode in the VTY. However, we had no command to remove that
explicit configuration and return to the implicit one.
Change-Id: Ibe2b298dd76dc4b02521dc411ae9d570eaf5a9a2
When 'cs7' was added, it was generally possible to get the full automatic
configuration spelled out by using 'show running-config'. Later, the vty was
modified so that automatically configured parts were omitted.
Since figuring out the 'cs7' configuration is far from trivial, it is very
convenient to get the program's current configuration spelled out in detail,
whether it is automatic or not. For this purpose, add a new 'show' command
which simply calls the ss7 VTY's write function with a new switch to disable
all omissions.
Change-Id: I84707561a6f54851c5599c39ea9bf1d971a2a1d7
Make build and external tests work with python3, so we can drop
the python2 dependency.
This should be merged shortly after osmo-python-tests was migrated to
python3, and the jenkins build slaves were (automatically) updated to
have the new osmo-python-tests installed.
Related: OS#2819
Depends: osmo-python-tests I3ffc3519bf6c22536a49dad7a966188ddad351a7
Change-Id: I344c49001fba23bdcfdef06ab174c52b60edd01c
The M3UA specification states that either of the two roles should
be the SCTP client and the other the server. It also states that
the default for the SGP is to operate as server. However, it permits
other configurations. Let's allow this to be configured by the VTY.
We need to ensure that while in ASP role, we don't send any NOTIFY
messages to the peer SG.
Change-Id: I7452a862d45da35dcd58654ca17222eb52d26f1f
Closes: OS#2005
So far, we had a static role model:
* SCTP servers (listening, such as OsmoSTP) are role SGW
* SCTP clients (connecting, such as OsmoMSC) are role ASP
While this is customary, it is not actually required by the
specification. The SGW can establish the SCTP connection to an ASP
but still remain "SG" role.
Let's make things more flexible by having the role configurable.
Related: OS#2005
Change-Id: I2df9cd9747ad5c9a05d567d9a71bab6184c53674
Config file sets omo-stp instance to bind on 2 IP addresses, and then
the test verfies through linux /proc/net/sctp/* that binding is done
correctly and that it can be reached from another remote address to one
of the configured addresses.
Change-Id: Ifa11b1fc882dff415405f62024e94bed67228866
After this patch, Several "local-ip" and "remote-ip" lines are accepted
under "listen" and "asp" VTY nodes, allowing to configure an SCTP
connection with multiple connections, hence allowing control of SCTP
multi-homing features.
libosmo-sccp clients such as osmo-bsc and osmo-msc also gain support for
this feature with this commit.
Related: OS#3608
Depends: libosmocore.git Ic8681d9e093216c99c6bca4be81c31ef83688ed1
Depends: libosmo-netif.git I0fe62f518e195db4e34f3b0ad1762bb57ba9d92a
Change-Id: Ibd15de7a4e00dbec78ff2e2dd6a686b0f3af22de
When receiving SCCP messages from an IPA peer/ASP, osmo-stp so far
unconditionally inserted origin/destination point codes int the SCCP
called / calling party addresses.
This behaviro is now made optional with the introduction of the
following per-AS configuration:
"point-code override patch-sccp (disabled|both)"
The default behavior is switched from 'both' to 'disabled' at the same
time.
Change-Id: I535e2170adadfe755d2bcbf5bbf4556bebb77737
Closes: OS#4219
Since March 15th 2017, libosmocore API logging_vty_add_cmds() had its
parameter removed (c65c5b4ea075ef6cef11fff9442ae0b15c1d6af7). However,
definition in C file doesn't contain "(void)", which means number of
parameters is undefined and thus compiler doesn't complain. Let's remove
parameters from all callers before enforcing "(void)" on it.
Related: OS#4138
Change-Id: Iedd11f816002b686f0ddb54c0cf7ba4e229e21e3
The previous hardcoded SCCP timers may cause SCCP connection releases, if the
peer is configured with far lower timers than libosmo-sccp. Testing with a
specific SCCPlite MSC, I experienced an iar of just over three minutes, meaning
that calls would be cut off by the MSC, since the osmo-bsc failed to send an
Inactivity Timer message until seven minutes have passed.
With this patch, SCCP timers are configurable by the user.
Define constant global default timers, and variable user-configurable timers
with each osmo_sccp_instance.
Add VTY UI to configure the timers. Users must call osmo_sccp_vty_init() to get
the sccp-timer config nodes under the 'cs7' node. Show the new UI in
ss7_asp_test.vty.
Note that even though this function is not new at all, until recently, all of
our SCCP users (osmo-bsc, osmo-msc, osmo-sgsn, osmo-hnbgw) failed to call
osmo_sccp_vty_init(), and thus also missed out on the various 'show' commands
defined in sccp_vty.c. In other words, to benefit from the timer
configurability, the patches to call osmo_sccp_vty_init() must first be merged
to the corresponding master branches.
If a 'sccp-timer' config command occurs, the cs7 instance must allocate an SCCP
instance in order to store the timer config. Do that by calling the recently
added osmo_ss7_ensure_sccp() function.
Hence remove the limitation that the SCCP instance must not be populated from
the "simple" setup function. If we want to configure SCCP timers beforehand,
there must be an SCCP instance for that, and there is no hard reason to require
a NULL SCCP instance, besides the desire to prevent this function from being
invoked twice.
Change-Id: I28a7362aa838e648ecc9b26ee53dbcade81a9d65
For 'show cs7 instance 0 ssn', fix doc string for 'ssn', and add missing one
for the SSN arg. This fixes depending builds that see VTY test failures due to
the missing doc string.
For 'show cs7 instance 0 connectsion', fix doc string for 'connections'.
Change-Id: I214ea51fc6bfa2a9a4dd7c34b43add0c77ffe22e
The 'show cs7 instance 0 sccp-addressbook' command should not be inside the
'cs7' node. That defies the point of naming the instance again, and it falls
out of place of all the other 'show cs7' commands on the VIEW and ENABLE nodes.
Drop the old command within the 'cs7' node without substitution or deprecation.
At the same time, drop dash from 'show cs7 i 0 sccp-addressbook'
There are various other show cs7 commands already defined in sccp_vty.c, which
have 'sccp' as a separate string. Conform to that.
Change-Id: I80e0bc0a91bcd3fb75372045db34592d2d663d41
Fix typo "to long".
Say 'cs7 instance' instead of 'ss7 instance': we are interacting with a user on
the telnet VTY, and that user is configuring a 'cs7 instance'. Especially a
lowercase 'ss7' is potentially confusing ("is there an 'ss7' node?").
Changes show in ss7_asp_test.vty.
Change-Id: Iebb976531576268d58338895a4baadbca6137b80
Define SCCP_STR in sccp_internal.h, because I know that I want to also use it
in osmo_ss7_vty.c.
Fix "Signaling" to "Signalling" upon copying the old string.
Change-Id: Ic93e4771147070a9222c73f80b5f7c29ae7eec35
Add ss7_asp_vty_test, a shim test program with the sole purpose of exposing the
cs7 VTY nodes.
Add ss7_asp_test.vty, transcript for verifying VTY nodes using above program.
Add --enable-external-tests to configure.
Run jenkins.sh with --enable-external-tests.
Change-Id: I6a28684fa24d6e7de568623444297028eba2ab8c
Vadim Yanitskiy
Pau Espin
Oliver Smith
Philipp Maier
Harald Welte
Neels Hofmeyr
Neels Hofmeyr