trau_pcu_ericsson: add comment about uplink blocks

While testing each uplink block (CS1-C4, MCS1-MCS9) indvidually some
specific behaviour was observed.

Change-Id: I35b9a35c9b583378559daa400e105537338ee68a
Related: OS#5198
This commit is contained in:
Philipp Maier 2023-02-23 11:42:54 +01:00
parent 122a66da2e
commit 26f7a7474e
1 changed files with 24 additions and 1 deletions

View File

@ -277,4 +277,27 @@ int er_gprs_trau_frame_decode_64k(struct er_gprs_trau_frame *fr, const ubit_t *b
* value back. The timing adjustment is performed immediately within the same frame by appending or removing bits
* at the end. This delays or advances the timing of the subsequent frame.
*
* The procedure is very similar to the one described in: GSM 08.60, section 4.6.1.2 */
* The procedure is very similar to the one described in: GSM 08.60, section 4.6.1.2
*
*
* Usable coding schemes in uplink
* ===============================
* To understand which coding schemes are usable one must understand that the first CCU implementation for Ericsson
* RBS only supported CS1 and CS2 on 16K I.460 subslots. CS1 and CS2 were not supported due to the bandwidth limitation
* of the 16k subslots. In order to support higher bandwidth, in particular EDGE, a new CCU implementation was
* introduced. This newer implementation uses full 64K E1 timeslots and has full EDGE support MCS1-MCS9.
*
* Interestingly though, the newer CCU implementation seems to lack support for CS3-CS4. At least it was not possible
* To receive any CS3 or CS4 blocks from the CCU, while CS1 and CS2 work fine. In case the PCU is instructed to use
* CS3 or CS4 in downlink nothing is received. Since the CCU also demodulates noise and even sends the demodulation
* results back to the PCU there should have been at least some invalid CS3 and CS4 blocks in the demodulation results
* from time to time but also here no CS3 or CS4 blocks were observed. This leads to the vague assumption that the GPRS
* part of the CCU presumably never got updated and only EDGE support was added.
*
* It was also discovered that CS1 and CS2 only appear when the CCU is instructed to receive GMSK only
* (ER_UL_CHMOD_NB_GMSK). When the CCU is instructed to receive GMSK and PSK (ER_UL_CHMOD_NB_UNKN) CS2 does not appear.
* EGPRS related blocks (CS_OR_HDR_HDR1-3) appear in both situations. Since CS1 also plays a role in EGPRS it might be
* that the CCU is filtering non EDGE related blocks when ER_UL_CHMOD_NB_UNKN is used.
*
* The observations above were made with an RRUS 02 B3
*/