The default filename pattern of the JUnit log plugins of TTCN-3 is
"junit-xml-%u.xml" where %u represents the PID of the process. This
is typically a good idea as the PID doesn't wrap that quickly. However,
if you're executing a new docker container for every test suite run,
then chances are high that two subsequent runs of the test suite
container might end up with the same PID and hence the smae filename.
This results in the output file being overwritten, which is what's
responsible for many missing RemsimServer_Tests results on the
jenkins.osmocom.org test results analyzer.
Change-Id: I9b6d1b5a943eb4e058ad2bf7cf8acee7b70e68b6
Closes: OS#4205
Now that osmo-ttcn3-hacks.git I221675721b65b3ab44179e9657da70ba4004d7de
introduced VTY support for PCU_Tests_RAW, we need to use the correct
addr here.
Change-Id: I6807dafd79e58750ffa953da30eb34671aa25808
osmo-sip-connector master and the ttcn3 tests have moved to protocol version 6.
While the extension is gracefully handled by the ttcn templates to make do with
both protocol versions, the actual protocol version number sent to
osmo-sip-connector breaks the tests if it doesn't match. So that master can
still run v6 yet also pass 'latest', configure v5 when the version is not
'master'.
When 'latest' also moves to v6, we of course can revert this again.
Related: Iaca9ed6611fc5ca8ca749bbbefc31f54bea5e925 (osmo-sip-connector)
Related: I39d55432776926a385e1b85b21bcdea8180a8946 (osmo-ttcn3-hacks)
Change-Id: I2174e90bdea32f06cd3e8298696b93027e7906bc
Since we'll now log the script and its children output to a file, let's
make sure the loop doesn't run countless times upon failing child
process, producing lots of potential undesired output. For instance, if
osmo-bts fails to read vty config and exits immediately.
Change-Id: Icc8cac889d94d4cce7d6365781d5b5364404b5b9
That's the default value for all BTS, so no need to have it there.
Furthermore, forthcoming osmo-bts patches will drop osmo-bts-trx support
for DSP/HW based MS Power control, which means BTS will reject this
setting. Let's drop it now and let osmo-bts binary to select the
preferred one.
Related: OS#1851
Change-Id: I0f69880a5028002a53736653735c11ae3cd53f07
Once osmo-ttcn3-hacks.git branch laforge/stp has been merged (where
STP_Tests devel was done), we can use master like we do for other
suites.
Change-Id: I844ecf8a636ead55b7b406cb97424a4a35a6b674
The configuration file for osmo-bsc contains obsolete config statements,
which cause osmo-bsc to crash. Lets remove those config statements.
Change-Id: Ic91e2ee1e9132886cd02535bc84a568d4c25dbb4
The logging categories cc and mgcp are obsolete for osmo-bsc and will
cause recent versions of osmo-bsc to crash. Lets remove this logging
categories from the config file now.
Change-Id: Idd85318abe3fc982909c11115c886835a3d8cd37
OsmoGGSN is not able to use the tun4 device from the default config in
docker. Since the more strict config checking in [1], it does not just
report a warning, but fails to start:
<0002> ggsn.c:189 APN(internet): Opening TUN device tun4
<0001> tun.c:184 errno=2/No such file or directory open() failed
<0002> ggsn.c:191 APN(internet): Failed to configure tun device
Error occurred during reading the below line:
no shutdown
Failed to open config file: '/etc/osmocom/osmo-ggsn.cfg'
Fix the repo install test jenkins job by not checking osmo-ggsn anymore.
In theory, we could probably create the tun device on the host, and
mount it inside the docker container. But that would require some
additional logic to clean it up properly, and it does not seem worth the
effort right now.
[1] libosmocore Ic9c1b566ec4a459f03e6319cf369691903cf9d00
Change-Id: I15c7a2f38a21cd96c9852ad26f4b4a81798e6593
The logging categories cc and mgcp are obsolete. The tests still contain
logging statements with those categories, which makes osmo-bsc
terminate during startup while parsing the configuration file.
Change-Id: Ifd6bf46b73420c0443f997ea953318710544b751
Currently builds from osmo-ttcn3-hacks.git branch laforge/stp instead of
master, since it's only available in the former branch. Once it gets
merged, we can modify Dockerfile as explained in it.
OS#4220
Change-Id: I635c891f5da7b8c59527abbad14d7377465d1045
Since libosmo-sccp.git 89407619a31a4332bdb59e7921b99a29b7d6e00c it is
not allowed to use routing ctx != 0 for IPA AS.
Change-Id: If3e883aa988ffa1686f1363d5d5d4dbb21ce36c7
Scripts ttcn3-tcpdump-start.sh and ttcn3-tcpdump-stop.sh, run by
osmo-ttcn3-hacks upon start and end of every test in the suite, starts
and stops tcpdump and netcat each time.
netcat is started in order to have a dummy sink for gsmtap log packets,
to get rid of annoying ICMP messages as well as the kernel deciding to
drop those messages (hence not ending up inside the pcap file of
tcpdump) under some circumstances.
Depends: osmo-ttcn3-hacks.git Id69d98db63f8260067ad6bc1525fb05c936912f2
Change-Id: Iccda25bc274ee93705c23dfd3e0f9dad5fc2a059
Have the same amount of bts like in the regular (non-sccplite)
osmo-bsc.cfg, so we can make BSC_Tests.TC_ctrl pass for regular and
sccplite again.
Related: I1c57a04747f5ec004ccf4657954dcb0b003c24fc
Related: Ie2c664ba0f845da644e20e2c919c12d8fc2af6ba (osmo-ttcn3-hacks)
Related: OS#4156
Change-Id: I00547dccf8908d46df4730cb513fe577956d7683
Last releases of osmo-bsc and osmo-bsc already support Osmux, so we can
drop those lines as indicated.
Change-Id: Id6a18f2d691f6e9234a5a0cf91ed5c840a6394de
Previous commit was merged without dependent tests from osmo-ttcn3-hacks
being yet present. Let's disable them until they are present.
Fixes: ca2ef84252
Change-Id: Icd7a3885bac7f8189272981d4fdac3f269e6adef
To support Iu tests, start osmo-stp when testing.
Depends-on: I66069e31c30d33934ad57cc2b8794f56ffd5c7d6 (osmo-ttcn3-hacks)
Change-Id: I4d6aef98832202652c5fe254105728430ba77119
Analogous to osmo-ttcn3-hacks patch If44dd6b578cdc55076c8180707d1c2d69fe5f2a8,
also remove the neighbor config from osmo-bsc.cfg here.
Change-Id: I23d9a2046709452f4d3904230871f7421c6987a9
Enable test of systemd services for osmo-sgsn, osmo-pcu, osmo-hnbgw and
osmo-bts-virtual. Add issue ID to failing osmo-ctrl2cgi and
osmo-trap2cgi services.
Depends: Id892e1f4ab2daabbe9824b819b5fed985373b97a (osmo-sgsn)
Depends: Ie8001611756b661ff1871508c6248b2e990ba1d7 (osmo-bsc)
Depends: I354140f014854f1755b649e40a65e5d88b99c0ec (osmo-iuh)
Related: OS#3369
Change-Id: I4e182b396e1a2e36a73384233b1a38a70c7cd5d9
Previously we were using 178.18.12.0/24 which could have conflicted with
the osmo-bsc sccplite TTCN3 tests.
Change-Id: Ib5ab391ebb21ce2455fbb1ae47dd01ed53cd2e41
So far the SGSN master image is built without Iu support.
osmo-sgsn-latest is using the built debian packages which enable Iu
support, so it's not an issue there.
Change-Id: Ib9c2e96dc7309f7fcbd563d656b64d37f2599f7b
Run systemd services of Osmocom programs, to check if any are not
starting properly. Use a whitelist to determine which services must
start up, because some are currently broken.
Modify the docker run command to support changing the CPU scheduling
policy/priority in systemd service files (used by osmo-bts).
Related: OS#3369
Change-Id: Ie6385f85560fefa7e7c9dca72cb5e2e914d4507a
Harald Welte
Pau Espin
Neels Hofmeyr
Philipp Maier
Oliver Smith
Daniel Willmann