Give OsmoBSC time to connect to OsmoSTP, so BSSMAP RESET from the
testsuite doesn't fail in OsmoSTP with:
MTP-TRANSFER.req for DPC 187: no route!
Without this patch, it would fail every other time on my system when
only having one test enabled in BSC_Tests.cfg.
Change-Id: Ic7f80bdfe2fe58e93c2f2e3baa6d7645fcdc3062
Try multiple subnet numbers until successfully creating a network. This
way we can run the same ttcn3 testsuite multiple times in parallel
without conflicts (e.g. once against latest, once against nightly). Also
we don't need to make sure each new testsuite has a unique subnet
number anymore.
I've considered also adjusting network_bridge_create, but that gets used
exclusively by osmo-ran/jenkins.sh, a script which we don't actually run
in jenkins. It seems that in this script it makes more sense to not get
a random subnet number.
Related: OS#5802
Change-Id: I57152b08ef0f38e17e7019a8df032189b03f56cf
Use the SUBNET variable instead of hardcoding it in some places. Split
commands across multiple lines while at it to improve readability.
Related: OS#5802
Change-Id: I08f83089ef97f5f92d4bbfa5743301e7375e9f0f
This feature is used to indicate to the BSC that the BTS supports Osmux.
Requires: libosmocore 18c6a8183f92915e77368ecffb1cbf7f555453a3
Related: SYS#5987
Change-Id: Ia402b7514b636750442d0859d5ebc3fcad67dd9f
Add arguments to osmo-bts-omldummy to properly report the features that
were previously assumed for osmo-bts even without reporting them, until
this was changed in osmo-bsc I7fca42a39a4bc98a6ea8b9cfab28c4bad3a6a0aa.
Related: SYS#5922, OS#5538
Change-Id: Ib22f25431330676d59900de7bfb3d89e7872baf1
This enables the test suite to obtain talloc reports between the
test case executions, which get stored together with the PCAP files.
Let's see how it works with the mentioned projects first; others
can be configured later. See [1] for more details.
Change-Id: Icd4c2d80db934535d499598282ed9416d8088163
Related: [1] I1b03b17426d8760c55976e3b78ca2f3af248c055
Related: OS#5328
Write a line like 'Misc_Helpers.mp_osmo_repo := "nightly"' into the
TTCN-3 config file (e.g. BSC_Tests.cfg), before starting the testsuite.
This allows executing different code paths in the tests based on the
repository.
Related: OS#5327
Change-Id: Ic06532f7a67e59458652c5cf4c8f6fee8113e703
With this we'll avoid running the test in latest. This way we'll not
fail after changing the TS for the test and hence other tests won't be
affected.
Related: SYS#5309
Change-Id: If941c110501cd5f9c1d5084cc4d054e1eafb14f4
The test that needs A5/4 enables it dynamically, and a new test requires
a defined value to reset to.
This reverts commit 8005014b55.
Related: OS#4975
Depends: osmo-ttcn3-hacks I3cf36c6ef86a0db050507f3737f4b0c10dcd52ed
Change-Id: I55135ca00ef51de5cf6eaec75cfc20c21beef665
Abort the script and trigger the clean up script, whenever any of the
commands below to prepare the testsuite are failing. This saves time
with figuring out why suddenly all or most tests are failing, and avoids
running the entire testsuite on jenkins if it's obviously not going to
work.
Related: OS#3208
Change-Id: Ie68da2affda8c96b3a515a857a921a05f1bf8ef7
Add set_clean_up_trap() in jenkins-common.sh and run it at the beginning
of the jenkins.sh files. Move the common clean up code from the end of
every jenkins.sh file into clean_up_common(), which gets called by the
trap. Add a custom clean_up() function to those jenkins.sh files that
need additional clean up.
Replace explicit container stop commands (for containers attached to the
docker network) with one call to network_clean() in clean_up_common(). It
kills all containers attached to the docker network.
The motivation for this change is the upcoming optional build of initrd
and kernel during ttcn3-ggsn-test/jenkins.sh. After building these, a
short smoke test will be performed to make sure we can boot the kernel
and initrd, before continuing to run the entire testsuite against it. If
building or the smoke test fails, we must do a proper clean up of the
network and fix permissions.
Related: OS#3208
Change-Id: I807c6221d22fec31db23e2516e477a3eb43347fb
These changes are no longer needed since master versions of whole CNI
have been recently released.
Related: OS#5042
Change-Id: I6f491b58d4576b22c8ff3ab56a7b9e17163a8739
We previously only allocated IPv4 sub-nets to the network segments
created with 'docker network'. Let's fix that by assigning both
IPv4 and IPv6 address ranges to each docker network.
Related: OS#4700
Change-Id: I8802208fddcce1ffa57e5626575d23d02b320d99
When launching osmo-stp-master from ttcn3-bsc-test, set ulimit=-1 to allow core
files.
In osmo-stp-master set WORKDIR to /data to hopefully get the core file ending
up there without the need to set a /proc/sys/kernel/core_pattern globally in
the jenkins slave.
Change-Id: Idd67fcb3f564b9cff9b4596bf639ed1bd1b58daf
Don't list debian-stretch-build and debian-stretch-titan as dependencies
anymore, now that docker_images_require finds them automatically.
Related: OS#4564
Change-Id: I3cb6b693f3dd9df84fb29c0217bb3dae454cc18f
Allow to pass options to each "docker run" line in the various
jenkins.sh scripts. I'm using this to run the testsuites and Osmocom
components in docker with the same configurations as jenkins, but with
Osmocom and testsuite binaries built outside and mounted into the
containers:
DOCKER_ARGS="-v /usr/local:/usr/local:ro -v $hacks:/osmo-ttcn3-hacks:ro"
This allows very short test cycles without a second set of configs. The
full script that makes use of this feature is in osmo-dev.git,
ttcn3/ttcn3.sh.
Change-Id: I8d1f78aee926f8f6ec0b704e16639bc83f525816
Last releases of osmo-bsc and osmo-bsc already support Osmux, so we can
drop those lines as indicated.
Change-Id: Id6a18f2d691f6e9234a5a0cf91ed5c840a6394de
Latest tagged version of osmo-bsc doesn't support "osmux on/off" VTY
commands, so we have to enable osmux use on that version to avoid most
TTCN3 tests failing during set up phase.
Depends: osmo-ttcn3-hacks I61e4c59b2926f3f70cb6d0190a8683861e54179a
Change-Id: I745b210f43cb147d323a15f78c294f70ee077729
Default value "master" of the IMAGE_SUFFIX environment variable can be
changed to "latest" to test the latest stable builds instead of the
nightly ones. Use docker_images_require() to make sure that the required
images are existing and up-to-date before running the tests.
Related: OS#3268
Change-Id: Idbb708ab16cb71bab5069127945b63388222369e
To remove code dup and prepare a change to where logs are written, add
collect_logs() to jenkins_common.sh and call that from each jenkins.sh after
the tests are done.
The 'rm -rf' is already done before a test starts. No need to do that again
after each test.
Change-Id: I5d8472ec36b07c828685b1bd7718e31392d168a3
This uses osmo-ttcn3-hacks Change-Id
I3db452e24e5238aa05254d903739c64d202e61db, which introduces
some shared/common config file as well as per-testcase pcap file
generation.
Ideally we would want to launch a group of containers with their own
private network segment and use the same static IP addresses in those
isolated networks.
The stupidity of docker is requiring unique IPv4 addresses even on
isolated (!) networks. This means we have to manually give each of our
test setups a different subnet, and then we can at least run one
instance that test in parallel to at most one instance of each other
test.
If this weird reestriction about unique IPv4 addresses didn't exist,
we could start any number of test runs in parallel.
Oliver Smith
Pau Espin
Vadim Yanitskiy
Neels Hofmeyr
Philipp Maier
Daniel Willmann
Harald Welte