wireshark/bridged_pids.h
Guy Harris 039bd984c0 Make the stuff to handle SNAP frames (OUI, PID, payload) a routine of
its own; it's used not only by LLC, but by Frame Relay with RFC 2427 and
ATM with RFC 2684.

Support for RFC 2427-encapsulation Frame Relay packets, from Paul
Ionescu.

Get rid of the CISCO_IP PPP protocol type - Cisco HDLC uses, in most
cases, Ethernet packet types, so use ETHERTYPE_IP instead (they're both
0x0800).

svn path=/trunk/; revision=2854
2001-01-10 09:07:35 +00:00

52 lines
1.9 KiB
C

/* bridged_pids.h
* Definitions of protocol IDs for the 00-80-C2 OUI, used for
* bridging various networks over ATM (RFC 2684) or Frame Relay (RFC 2427).
*
* $Id: bridged_pids.h,v 1.1 2001/01/10 09:07:35 guy Exp $
*
* Ethereal - Network traffic analyzer
* By Gerald Combs <gerald@zing.org>
* Copyright 1998 - 2000 Gerald Combs
*
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#ifndef __BRIDGED_PID_H__
#define __BRIDGED_PID_H__
#define BPID_ETH_WITH_FCS 0x0001 /* 802.3/Ethernet with preserved FCS */
#define BPID_ETH_WITHOUT_FCS 0x0007 /* 802.3/Ethernet without preserved FCS */
#define BPID_802_4_WITH_FCS 0x0002 /* 802.4 with preserved FCS */
#define BPID_802_4_WITHOUT_FCS 0x0008 /* 802.4 without preserved FCS */
#define BPID_802_5_WITH_FCS 0x0003 /* 802.5 with preserved FCS */
#define BPID_802_5_WITHOUT_FCS 0x0009 /* 802.5 without preserved FCS */
#define BPID_FDDI_WITH_FCS 0x0004 /* FDDI with preserved FCS */
#define BPID_FDDI_WITHOUT_FCS 0x000A /* FDDI without preserved FCS */
#define BPID_802_6_WITH_FCS 0x0005 /* 802.6 with preserved FCS */
#define BPID_802_6_WITHOUT_FCS 0x000B /* 802.6 without preserved FCS */
#define BPID_FRAGMENTS 0x000D
#define BPID_BPDU 0x000E /* 802.1(d) or 802.1(g) BPDUs */
#define BPID_SR_BPDU 0x000F /* Source Routing BPDUs */
#endif