osmith
/
wireshark
forked from osmocom/wireshark
1
0
Fork 0
Code Pull Requests Releases Wiki Activity
wireshark/epan/dissectors/packet-ipmi-pps.c

113 lines
5.9 KiB
C
Raw Blame History

/* packet-ipmi-pps.c
* Sub-dissectors for IPMI messages (netFn=OEM/Group, defining body = PPS)
* Copyright 2007-2008, Alexey Neyman, Pigeon Point Systems <avn@pigeonpoint.com>
*
* Wireshark - Network traffic analyzer
* By Gerald Combs <gerald@wireshark.org>
* Copyright 1998 Gerald Combs
*
* SPDX-License-Identifier: GPL-2.0-or-later
*/
#include "config.h"
#include <epan/packet.h>
#include "packet-ipmi.h"
void proto_register_ipmi_pps(void);
static ipmi_cmd_t cmd_pps[] = {
{ 0x00, IPMI_TBD, NULL, NULL, "[PPS OEM] Get Status", 0 },
{ 0x01, IPMI_TBD, NULL, NULL, "[PPS OEM] Get Serial Interface Properties", 0 },
{ 0x02, IPMI_TBD, NULL, NULL, "[PPS OEM] Set Serial Interface Properties", 0 },
{ 0x03, IPMI_TBD, NULL, NULL, "[PPS OEM] Get Debug Level", 0 },
{ 0x04, IPMI_TBD, NULL, NULL, "[PPS OEM] Set Debug Level", 0 },
{ 0x05, IPMI_TBD, NULL, NULL, "[PPS OEM] Get Hardware Address", 0 },
{ 0x06, IPMI_TBD, NULL, NULL, "[PPS OEM] Set Hardware Address", 0 },
{ 0x07, IPMI_TBD, NULL, NULL, "[PPS OEM] Get Handle Switch", 0 },
{ 0x08, IPMI_TBD, NULL, NULL, "[PPS OEM] Set Handle Switch", 0 },
{ 0x09, IPMI_TBD, NULL, NULL, "[PPS OEM] Get Payload Communication Timeout", 0 },
{ 0x0a, IPMI_TBD, NULL, NULL, "[PPS OEM] Set Payload Communication Timeout", 0 },
{ 0x0b, IPMI_TBD, NULL, NULL, "[PPS OEM] Enable Payload Control", 0 },
{ 0x0c, IPMI_TBD, NULL, NULL, "[PPS OEM] Disable Payload Control", 0 },
{ 0x0d, IPMI_TBD, NULL, NULL, "[PPS OEM] Reset IPMC", 0 },
{ 0x0e, IPMI_TBD, NULL, NULL, "[PPS OEM] Hang IPMC", 0 },
{ 0x0f, IPMI_TBD, NULL, NULL, "[PPS OEM] Bused Resource Control", 0 },
{ 0x10, IPMI_TBD, NULL, NULL, "[PPS OEM] Bused Resource Status", 0 },
{ 0x11, IPMI_TBD, NULL, NULL, "[PPS OEM] Graceful Reset", 0 },
{ 0x12, IPMI_TBD, NULL, NULL, "[PPS OEM] Diagnostic Interrupt Results", 0 },
{ 0x13, IPMI_TBD, NULL, NULL, "[PPS OEM] Set/Clear Telco Alarm", 0 },
{ 0x14, IPMI_TBD, NULL, NULL, "[PPS OEM] Get Telco Alarm Sensor Number", 0 },
{ 0x15, IPMI_TBD, NULL, NULL, "[PPS OEM] Get Payload Shutdown Timeout", 0 },
{ 0x16, IPMI_TBD, NULL, NULL, "[PPS OEM] Set Payload Shutdown Timeout", 0 },
{ 0x17, IPMI_TBD, NULL, NULL, "[PPS OEM] Switch over Serial Debug", 0 },
{ 0x18, IPMI_TBD, NULL, NULL, "[PPS OEM] Set Local FRU LED State", 0 },
{ 0x19, IPMI_TBD, NULL, NULL, "[PPS OEM] Get Local FRU LED State", 0 },
{ 0x1a, IPMI_TBD, NULL, NULL, "[PPS OEM] Update Discrete Sensor", 0 },
{ 0x1b, IPMI_TBD, NULL, NULL, "[PPS OEM] Update Threshold Sensor", 0 },
{ 0x1c, IPMI_TBD, NULL, NULL, "[PPS OEM] BTI Script Prepare", 0 },
{ 0x1d, IPMI_TBD, NULL, NULL, "[PPS OEM] BTI Script Write", 0 },
{ 0x1e, IPMI_TBD, NULL, NULL, "[PPS OEM] BTI Script Complete", 0 },
{ 0x1f, IPMI_TBD, NULL, NULL, "[PPS OEM] BTI Script Start", 0 },
{ 0x20, IPMI_TBD, NULL, NULL, "[PPS OEM] BTI Script Stop", 0 },
{ 0x21, IPMI_TBD, NULL, NULL, "[PPS OEM] BTI Script Resume", 0 },
{ 0x22, IPMI_TBD, NULL, NULL, "[PPS OEM] BTI Script Cease", 0 },
{ 0x23, IPMI_TBD, NULL, NULL, "[PPS OEM] BTI Sensor Set", 0 },
{ 0x24, IPMI_TBD, NULL, NULL, "[PPS OEM] BTI Notify", 0 },
{ 0x25, IPMI_TBD, NULL, NULL, "[PPS OEM] BTI Get FRU State", 0 },
{ 0x26, IPMI_TBD, NULL, NULL, "[PPS OEM] BTI Invalidate Hardware Address", 0 },
{ 0x27, IPMI_TBD, NULL, NULL, "[PPS OEM] Get Module Status", 0 },
{ 0x28, IPMI_TBD, NULL, NULL, "[PPS OEM] Enable AMC Site", 0 },
{ 0x29, IPMI_TBD, NULL, NULL, "[PPS OEM] Disable AMC Site", 0 },
{ 0x2a, IPMI_TBD, NULL, NULL, "[PPS OEM] BTI Wait for Payload Notify", 0 },
{ 0x2b, IPMI_TBD, NULL, NULL, "[PPS OEM] Set Test Flags", 0 },
{ 0x2c, IPMI_TBD, NULL, NULL, "[PPS OEM] Get Geographic Address", 0 },
{ 0x2d, IPMI_TBD, NULL, NULL, "[PPS OEM] Set Geographic Address", 0 },
{ 0x30, IPMI_TBD, NULL, NULL, "[PPS OEM] Set EEPROM Sensor Data", 0 },
{ 0x31, IPMI_TBD, NULL, NULL, "[PPS OEM] Set EEPROM Sensor Hysteresis", 0 },
{ 0x32, IPMI_TBD, NULL, NULL, "[PPS OEM] Set EEPROM Sensor Threshold", 0 },
{ 0x33, IPMI_TBD, NULL, NULL, "[PPS OEM] Reset EEPROM SDR Repository", 0 },
{ 0x34, IPMI_TBD, NULL, NULL, "[PPS OEM] Backend Power Control", 0 },
{ 0x35, IPMI_TBD, NULL, NULL, "[PPS OEM] Read CPLD Register", 0 },
{ 0x36, IPMI_TBD, NULL, NULL, "[PPS OEM] Write CPLD Register", 0 },
{ 0x37, IPMI_TBD, NULL, NULL, "[PPS OEM] Calibrate A2F Temperature Sensor", 0 },
{ 0x38, IPMI_TBD, NULL, NULL, "[PPS OEM] Get GPIO Signal State", 0 },
{ 0x39, IPMI_TBD, NULL, NULL, "[PPS OEM] Set GPIO Signal State", 0 },
{ 0x40, IPMI_TBD, NULL, NULL, "[PPS OEM] Sensor AFS Dump MBX Page", 0 },
{ 0x41, IPMI_TBD, NULL, NULL, "[PPS OEM] Reset Non-Volatile Parameters and Reboot", 0 },
{ 0x42, IPMI_TBD, NULL, NULL, "[PPS OEM] Dump Profiling Data", 0 },
{ 0x43, IPMI_TBD, NULL, NULL, "[PPS OEM] Get FPGA Design Version", 0 },
{ 0x44, IPMI_TBD, NULL, NULL, "[PPS OEM] Get IPMB Trace Mask", 0 },
{ 0x45, IPMI_TBD, NULL, NULL, "[PPS OEM] Set IPMB Trace Mask", 0 },
{ 0x46, IPMI_TBD, NULL, NULL, "[PPS OEM] Get PWM DAC Level", 0 },
{ 0x47, IPMI_TBD, NULL, NULL, "[PPS OEM] Set PWM DAC Level", 0 },
{ 0x48, IPMI_TBD, NULL, NULL, "[PPS OEM] Get FRU Info Write-Protect State", 0 },
{ 0x49, IPMI_TBD, NULL, NULL, "[PPS OEM] Set FRU Info Write-Protect State", 0 }
};
void
proto_register_ipmi_pps(void)
{
static guint8 sig_pps[3] = { 0x0a, 0x40, 0x00 };
static guint8 sig_pps_rev[3] = { 0x00, 0x40, 0x0a };
ipmi_register_netfn_cmdtab(IPMI_OEM_REQ, IPMI_OEM_NONE, sig_pps, 3,
"Pigeon Point Systems", cmd_pps, array_length(cmd_pps));
ipmi_register_netfn_cmdtab(IPMI_OEM_REQ, IPMI_OEM_NONE, sig_pps_rev, 3,
"Pigeon Point Systems (reversed)", cmd_pps, array_length(cmd_pps));
}
/*
* Editor modelines - https://www.wireshark.org/tools/modelines.html
*
* Local variables:
* c-basic-offset: 8
* tab-width: 8
* indent-tabs-mode: t
* End:
*
* vi: set shiftwidth=8 tabstop=8 noexpandtab:
* :indentSize=8:tabSize=8:noTabs=false:
*/
View Git Blame Copy Permalink