forked from osmocom/wireshark
639 lines
24 KiB
C
639 lines
24 KiB
C
/* packet-ipdc.h
|
|
* Routines for IP Device Control (SS7 over IP) dissection
|
|
* Copyright Lucent Technologies 2004
|
|
* Josh Bailey <joshbailey@lucent.com> and Ruud Linders <ruud@lucent.com>
|
|
*
|
|
* $Id: packet-ipdc.h,v 1.4 2004/03/21 19:57:13 jmayer Exp $
|
|
*
|
|
* Ethereal - Network traffic analyzer
|
|
* By Gerald Combs <gerald@ethereal.com>
|
|
* Copyright 1998 Gerald Combs
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
*/
|
|
|
|
#define TCP_PORT_IPDC 6668
|
|
#define TRANS_ID_SIZE_IPDC 4
|
|
|
|
#define TEXT_UNDEFINED "UNDEFINED"
|
|
|
|
typedef enum {
|
|
IPDC_UNKNOWN,
|
|
IPDC_UINT,
|
|
IPDC_ASCII,
|
|
IPDC_BYTE,
|
|
IPDC_OCTET,
|
|
IPDC_IPA,
|
|
IPDC_LINESTATUS,
|
|
IPDC_CHANNELSTATUS,
|
|
IPDC_Q931
|
|
} ipdc_tag_type;
|
|
|
|
static const value_string line_status_vals[] = {
|
|
{ 0x00, "Not present" },
|
|
{ 0x01, "Disabled" },
|
|
{ 0x02, "Red alarm (loss of sync)" },
|
|
{ 0x03, "Yellow alarm" },
|
|
{ 0x04, "Other alarm or error" },
|
|
{ 0x05, "Up" },
|
|
{ 0x06, "Loopback" },
|
|
};
|
|
|
|
static const value_string channel_status_vals[] = {
|
|
{ 0x00, "Not present" },
|
|
{ 0x01, "Out of service" },
|
|
{ 0x03, "Maintenance (continuity test pending/in progress)" },
|
|
{ 0x04, "Blocked" },
|
|
{ 0x05, "Loopback" },
|
|
{ 0x06, "Idle" },
|
|
{ 0x07, "In use (dialing, ringing, etc.)" },
|
|
{ 0x08, "Connected" },
|
|
{ 0x50, "On hook" },
|
|
{ 0x51, "Off hook" },
|
|
};
|
|
|
|
static const value_string message_code_vals[] = {
|
|
{ 0x0082, "SS -> GW: ASUP: Acknowledgment to NSUP" },
|
|
{ 0x0084, "SS -> GW: LNK: Link Active" },
|
|
{ 0x0087, "SS -> GW: RCGST: Request Congestion Status" },
|
|
{ 0x00FF, "SS -> GW: MRJ: Message reject." },
|
|
{ 0x0041, "SS -> GW: RMS: Request module status" },
|
|
{ 0x0043, "SS -> GW: RLS: Request line status" },
|
|
{ 0x0045, "SS -> GW: RCS: Request channel status" },
|
|
{ 0x0051, "SS -> GW: SMS: Set a module to a given state" },
|
|
{ 0x0053, "SS -> GW: SLS: Set a line to a given state" },
|
|
{ 0x0055, "SS -> GW: SCS: Set a group of channels to a given state" },
|
|
{ 0x0047, "SS -> GW: RRS: Request RTP port Status" },
|
|
{ 0x0048, "SS -> GW: RARS: Request All RTP port Status" },
|
|
{ 0x0091, "SS -> GW: RSI: Request system information" },
|
|
{ 0x0001, "SS -> GW: RCSI: Request inbound call setup" },
|
|
{ 0x0009, "SS -> GW: RCST: Request pass-through call setup (TDM connection between two channels)" },
|
|
{ 0x0013, "SS -> GW: RCCP: Request packet call setup" },
|
|
{ 0x0015, "SS -> GW: RMPC: Modify/Query request packet call" },
|
|
{ 0x0011, "SS -> GW: RCR: Release channel request" },
|
|
{ 0x0012, "SS -> GW: ACR: Release channel complete" },
|
|
{ 0x0061, "SS -> GW: PCT: Prepare channel for continuity test" },
|
|
{ 0x0063, "SS -> GW: SCT: Start continuity test procedure with far end as loopback (Generate tone and check for received tone)" },
|
|
{ 0x0073, "SS -> GW: STN: Send tones" },
|
|
{ 0x0071, "SS -> GW: LTN: Listen for tones" },
|
|
{ 0x007D, "SS -> GW: RTE: Request Test Echo" },
|
|
{ 0x007E, "SS -> GW: ARTE: Response to Request Test Echo" },
|
|
{ 0x0079, "SS -> GW: NATV: Native Mode Q.931 Signaling Transport" },
|
|
{ 0x007A, "SS -> GW: TUNL: Tunneled Transport of signaling protocol data units" },
|
|
{ 0x0081, "GW -> SS: NSUP: Notify the soft switch that the GW is coming up" },
|
|
{ 0x0083, "GW -> SS: NSDN: Indication that the GW is going down" },
|
|
{ 0x0085, "GW -> SS: ALNK: Acknowledgement to Link Active" },
|
|
{ 0x0086, "GW -> SS: SLNK: Link Status" },
|
|
{ 0x0088, "GW -> SS: CGST: Congestion Status" },
|
|
{ 0x00FF, "GW -> SS: MRJ: Message reject." },
|
|
{ 0x0042, "GW -> SS: NMS: Notify module status" },
|
|
{ 0x0044, "GW -> SS: NLS: Notify line status" },
|
|
{ 0x0046, "GW -> SS: NCS: Notify channel status" },
|
|
{ 0x0056, "GW -> SS: RSCS: Response to SCS" },
|
|
{ 0x0049, "GW -> SS: NRS: Notify RTP port Status" },
|
|
{ 0x004A, "GW -> SS: NARS: Notify All RTP port Status" },
|
|
{ 0x0092, "GW -> SS: NSI: Notify System Information" },
|
|
{ 0x0002, "GW -> SS: ACSI: Accept inbound call setup" },
|
|
{ 0x0003, "GW -> SS: CONI: Connect inbound call (answer)" },
|
|
{ 0x0014, "GW -> SS: ACCP: Accept packet call setup" },
|
|
{ 0x0016, "GW -> SS: AMPC: Accept modify to packet call" },
|
|
{ 0x000A, "GW -> SS: ACST: Accept pass-through call" },
|
|
{ 0x0011, "GW -> SS: RCR: Release channel request" },
|
|
{ 0x0012, "GW -> SS: ACR: Release channel complete" },
|
|
{ 0x0062, "GW -> SS: APCT: Response to PCT" },
|
|
{ 0x0064, "GW -> SS: ASCT: Continuity test result" },
|
|
{ 0x0074, "GW -> SS: ASTN: Completion result of STN command" },
|
|
{ 0x0072, "GW -> SS: ALTN: Response to Listen for tones" },
|
|
{ 0x00F0, "GW -> SS: NTN: Notify ToNe" },
|
|
{ 0x007D, "GW -> SS: RTE: Request Test Echo" },
|
|
{ 0x007E, "GW -> SS: ARTE: Response to Request Test Echo" },
|
|
{ 0x0079, "GW -> SS: NATV: Native Mode Q.931 Signaling Transport" },
|
|
{ 0x007A, "GW -> SS: TUNL: Tunneled Transport of signaling protocol data units" },
|
|
{ 0x0005, "TD -> SS: RCSO: Request outbound call setup" },
|
|
{ 0x0006, "SS -> TD: ACSO: Accept outbound call setup" },
|
|
{ 0x0007, "SS -> TD: CONO: Outbound call connected" },
|
|
{ 0, NULL },
|
|
};
|
|
|
|
static const value_string tag_description[] = {
|
|
{ 0x01, "Protocol version" },
|
|
{ 0x02, "System ID/ Serial Number" },
|
|
{ 0x03, "System type" },
|
|
{ 0x04, "Maximum number of modules (slot cards) supported" },
|
|
{ 0x05, "Bay number" },
|
|
{ 0x07, "Module number" },
|
|
{ 0x0A, "Module type" },
|
|
{ 0x0C, "Module status" },
|
|
{ 0x0D, "Line number" },
|
|
{ 0x14, "Line status" },
|
|
{ 0x15, "Channel number" },
|
|
{ 0x17, "Bearer capability" },
|
|
{ 0x18, "Calling party number" },
|
|
{ 0x19, "Dialed number" },
|
|
{ 0x1B, "Primary SS IP address" },
|
|
{ 0x1C, "Primary SS TCP port" },
|
|
{ 0x20, "Number of lines in the Line status array" },
|
|
{ 0x21, "Line status array" },
|
|
{ 0x22, "Number of channels in the Channel status array" },
|
|
{ 0x23, "Channel status array" },
|
|
{ 0x24, "Requested module state" },
|
|
{ 0x25, "Requested line state" },
|
|
{ 0x26, "Requested channel status action" },
|
|
{ 0x27, "Set channel status option" },
|
|
{ 0x28, "Channel number first (for grouping)" },
|
|
{ 0x29, "End Channel Number (for grouping)" },
|
|
{ 0x2A, "Set channel status result" },
|
|
{ 0x2B, "Prepare for continuity check result" },
|
|
{ 0x2C, "Continuity timeout (ms)" },
|
|
{ 0x2D, "Continuity test result" },
|
|
{ 0x31, "Maximum time between digits in digits recognition/ tone" \
|
|
"detection (inter-digit time-out) (ms)" },
|
|
{ 0x32, "Tone string length" },
|
|
{ 0x33, "Tone string" },
|
|
{ 0x34, "Tone to complete collection" },
|
|
{ 0x35, "Tone listen completion status" },
|
|
{ 0x36, "Tone send completion status" },
|
|
{ 0x37, "TDM destination Module" },
|
|
{ 0x38, "TDM destination Line" },
|
|
{ 0x39, "TDM destination channel" },
|
|
{ 0x3A, "DTMF send IP address" },
|
|
{ 0x3B, "DTMF send RTP port number" },
|
|
{ 0x3C, "DTMF send format" },
|
|
{ 0x3D, "DTMF Named Events to Expect" },
|
|
{ 0x3E, "DTMF Payload Indicator" },
|
|
{ 0x40, "Access server Call identifier" },
|
|
{ 0x46, "Maximum time for digit collection (ms)" },
|
|
{ 0x49, "Tone Type" },
|
|
{ 0x4A, "Apply/Cancel Tone" },
|
|
{ 0x5D, "Destination listen IP address" },
|
|
{ 0x5E, "Destination listen RTP port number" },
|
|
{ 0x5F, "Destination send IP address" },
|
|
{ 0x60, "Destination send RTP port number" },
|
|
{ 0x65, "Source port type" },
|
|
{ 0x66, "Destination port type" },
|
|
{ 0x67, "Start RTP Port Number" },
|
|
{ 0x68, "End RTP Port Number" },
|
|
{ 0x69, "Rogue Session Addresses" },
|
|
{ 0x6A, "RTP Port Status" },
|
|
{ 0x6F, "Receive Encoding Type" },
|
|
{ 0x70, "Send Encoding Type" },
|
|
{ 0x71, "Silence Suppression Activation Timer (ms)" },
|
|
{ 0x72, "Comfort Noise Generation" },
|
|
{ 0x73, "Packet Loading (ms)" },
|
|
{ 0x74, "Echo Cancellation" },
|
|
{ 0x75, "Constant DTMF Tone Detection on/off" },
|
|
{ 0x76, "Constant MF Tone Detection on/off" },
|
|
{ 0x77, "Constant Fax tone detection on/off" },
|
|
{ 0x78, "Constant Modem tone detection on/off" },
|
|
{ 0x7B, "Constant Packet Loss Detection on/off" },
|
|
{ 0x7C, "Packet Loss Threshold" },
|
|
{ 0x7D, "Constant Latency Threshold Detection on/off" },
|
|
{ 0x7E, "Latency Threshold (ms)" },
|
|
{ 0x86, "Announcement treatment" },
|
|
{ 0x90, "Packet Statistics Reset Indicator" },
|
|
{ 0x91, "Number of audio packets sent" },
|
|
{ 0x92, "Number of audio packets dropped" },
|
|
{ 0x93, "Number of audio bytes sent" },
|
|
{ 0x94, "Number of audio bytes dropped" },
|
|
{ 0x95, "Number of signaling packets sent" },
|
|
{ 0x96, "Number of signaling packets dropped" },
|
|
{ 0x97, "Number of signaling bytes sent" },
|
|
{ 0x98, "Number of signaling bytes dropped" },
|
|
{ 0x99, "Estimated average latency (ms)" },
|
|
{ 0x9D, "Number of audio packets received" },
|
|
{ 0x9E, "Number of audio bytes received" },
|
|
{ 0x9F, "Number of signaling packets received" },
|
|
{ 0xA0, "Number of signaling bytes received" },
|
|
{ 0xA1, "Protocol Type" },
|
|
{ 0xA2, "PDU Data Block" },
|
|
{ 0xA3, "Jitter estimated (m ticks)" },
|
|
{ 0xA4, "Global call ID" },
|
|
{ 0xA5, "User information line 1 proto" },
|
|
{ 0xA6, "Congestion level indicator" },
|
|
{ 0xA7, "RADIUS Ascend-auth-type" },
|
|
{ 0xB0, "Link status" },
|
|
{ 0xB1, "Action request" },
|
|
{ 0xB2, "Calling Party Info1" },
|
|
{ 0xB3, "Called Party Info2" },
|
|
{ 0xC1, "Country Code" },
|
|
{ 0xC2, "Number of Operational Universal Ports" },
|
|
{ 0xC3, "Number of Operational HDLC-only (digital) ports" },
|
|
{ 0xFE, "Q.850 Cause code" },
|
|
{ 0, NULL },
|
|
};
|
|
|
|
typedef struct _ipdc_tag_type_val {
|
|
gint tag;
|
|
ipdc_tag_type type;
|
|
} ipdc_tag_type_val;
|
|
|
|
static const ipdc_tag_type_val ipdc_tag_types[] = {
|
|
{ 0x01, IPDC_UINT },
|
|
{ 0x02, IPDC_ASCII },
|
|
{ 0x03, IPDC_ASCII },
|
|
{ 0x04, IPDC_UINT },
|
|
{ 0x05, IPDC_ASCII },
|
|
{ 0x07, IPDC_UINT },
|
|
{ 0x0A, IPDC_BYTE },
|
|
{ 0x0C, IPDC_BYTE },
|
|
{ 0x0D, IPDC_UINT },
|
|
{ 0x14, IPDC_BYTE },
|
|
{ 0x15, IPDC_UINT },
|
|
{ 0x17, IPDC_BYTE },
|
|
{ 0x18, IPDC_ASCII },
|
|
{ 0x19, IPDC_ASCII },
|
|
{ 0x1B, IPDC_IPA },
|
|
{ 0x1C, IPDC_UINT },
|
|
{ 0x20, IPDC_UINT },
|
|
{ 0x21, IPDC_LINESTATUS },
|
|
{ 0x22, IPDC_UINT },
|
|
{ 0x23, IPDC_CHANNELSTATUS },
|
|
{ 0x24, IPDC_BYTE },
|
|
{ 0x25, IPDC_OCTET }, /* TBD */
|
|
{ 0x26, IPDC_BYTE },
|
|
{ 0x27, IPDC_BYTE },
|
|
{ 0x28, IPDC_UINT },
|
|
{ 0x29, IPDC_UINT },
|
|
{ 0x2A, IPDC_BYTE },
|
|
{ 0x2B, IPDC_BYTE },
|
|
{ 0x2C, IPDC_UINT },
|
|
{ 0x2D, IPDC_BYTE },
|
|
{ 0x31, IPDC_UINT },
|
|
{ 0x32, IPDC_UINT },
|
|
{ 0x33, IPDC_ASCII },
|
|
{ 0x34, IPDC_ASCII },
|
|
{ 0x35, IPDC_BYTE },
|
|
{ 0x36, IPDC_UINT },
|
|
{ 0x37, IPDC_UINT },
|
|
{ 0x38, IPDC_UINT },
|
|
{ 0x39, IPDC_UINT },
|
|
{ 0x3A, IPDC_IPA },
|
|
{ 0x3B, IPDC_UINT },
|
|
{ 0x3C, IPDC_BYTE },
|
|
{ 0x3D, IPDC_ASCII },
|
|
{ 0x3E, IPDC_UINT },
|
|
{ 0x40, IPDC_UINT },
|
|
{ 0x46, IPDC_UINT },
|
|
{ 0x49, IPDC_BYTE },
|
|
{ 0x4A, IPDC_BYTE },
|
|
{ 0x5D, IPDC_IPA },
|
|
{ 0x5E, IPDC_UINT },
|
|
{ 0x5F, IPDC_IPA },
|
|
{ 0x60, IPDC_UINT },
|
|
{ 0x65, IPDC_BYTE },
|
|
{ 0x66, IPDC_BYTE },
|
|
{ 0x67, IPDC_UINT },
|
|
{ 0x68, IPDC_UINT },
|
|
{ 0x69, IPDC_IPA },
|
|
{ 0x6A, IPDC_BYTE },
|
|
{ 0x6F, IPDC_BYTE },
|
|
{ 0x70, IPDC_BYTE },
|
|
{ 0x71, IPDC_UINT },
|
|
{ 0x72, IPDC_BYTE },
|
|
{ 0x73, IPDC_UINT },
|
|
{ 0x74, IPDC_BYTE },
|
|
{ 0x75, IPDC_BYTE },
|
|
{ 0x76, IPDC_BYTE },
|
|
{ 0x77, IPDC_BYTE },
|
|
{ 0x78, IPDC_BYTE },
|
|
{ 0x7B, IPDC_BYTE },
|
|
{ 0x7C, IPDC_UINT },
|
|
{ 0x7D, IPDC_BYTE },
|
|
{ 0x7E, IPDC_UINT },
|
|
{ 0x86, IPDC_BYTE },
|
|
{ 0x90, IPDC_BYTE },
|
|
{ 0x91, IPDC_UINT },
|
|
{ 0x92, IPDC_UINT },
|
|
{ 0x93, IPDC_UINT },
|
|
{ 0x94, IPDC_UINT },
|
|
{ 0x95, IPDC_UINT },
|
|
{ 0x96, IPDC_UINT },
|
|
{ 0x97, IPDC_UINT },
|
|
{ 0x98, IPDC_UINT },
|
|
{ 0x99, IPDC_UINT },
|
|
{ 0x9D, IPDC_UINT },
|
|
{ 0x9E, IPDC_UINT },
|
|
{ 0x9F, IPDC_UINT },
|
|
{ 0xA0, IPDC_UINT },
|
|
{ 0xA1, IPDC_UINT },
|
|
{ 0xA2, IPDC_Q931 },
|
|
{ 0xA3, IPDC_BYTE },
|
|
{ 0xA4, IPDC_BYTE },
|
|
{ 0xA5, IPDC_BYTE },
|
|
{ 0xA6, IPDC_UINT },
|
|
{ 0xA7, IPDC_UINT },
|
|
{ 0xB0, IPDC_BYTE },
|
|
{ 0xB1, IPDC_BYTE },
|
|
{ 0xB2, IPDC_OCTET },
|
|
{ 0xB3, IPDC_OCTET },
|
|
{ 0xC1, IPDC_BYTE },
|
|
{ 0xC2, IPDC_UINT },
|
|
{ 0xC3, IPDC_UINT },
|
|
{ 0xFE, IPDC_UINT },
|
|
{ 0xFFFF, IPDC_UNKNOWN },
|
|
};
|
|
|
|
#define IPDC_TAG(x) (256 * (x))
|
|
|
|
static const value_string tag_enum_type[] = {
|
|
/* Protocol Version */
|
|
{ IPDC_TAG(0x01) + 0x00, "Version 0 (Xcom NMI 5.0)" },
|
|
{ IPDC_TAG(0x01) + 0x01, "IPDC Version 0.12" },
|
|
{ IPDC_TAG(0x01) + 0x02, "IPDC Version 0.15" },
|
|
{ IPDC_TAG(0x01) + 0x03, "IPDC Version 0.17" },
|
|
{ IPDC_TAG(0x01) + 0x04, "IPDC Version 0.18" },
|
|
{ IPDC_TAG(0x01) + 0x05, "IPDC Version 0.19" },
|
|
{ IPDC_TAG(0x01) + 0x06, "IPDC Version 0.20" },
|
|
/* Module type, from Annex B. */
|
|
{ IPDC_TAG(0x0a) + 0x01, "Unknown" },
|
|
{ IPDC_TAG(0x0a) + 0x02, "Shelf" },
|
|
{ IPDC_TAG(0x0a) + 0x03, "Router Card" },
|
|
{ IPDC_TAG(0x0a) + 0x04, "8-line Channelized T1" },
|
|
{ IPDC_TAG(0x0a) + 0x05, "8-line Channelized E1" },
|
|
{ IPDC_TAG(0x0a) + 0x06, "48-modem Card" },
|
|
{ IPDC_TAG(0x0a) + 0x07, "192 HDLC Card" },
|
|
{ IPDC_TAG(0x0a) + 0x08, "4-port Ethernet Card" },
|
|
{ IPDC_TAG(0x0a) + 0x09, "Serial WAN Card" },
|
|
{ IPDC_TAG(0x0a) + 0x0A, "HSSI Card" },
|
|
{ IPDC_TAG(0x0a) + 0x0B, "10-line Unchannelized T1" },
|
|
{ IPDC_TAG(0x0a) + 0x0C, "36-modem (Analog) Card" },
|
|
{ IPDC_TAG(0x0a) + 0x0D, "T3 Card" },
|
|
{ IPDC_TAG(0x0a) + 0x0E, "48-modem 56K Card" },
|
|
{ IPDC_TAG(0x0a) + 0x0F, "Forward" },
|
|
{ IPDC_TAG(0x0a) + 0x10, "SDSL Card" },
|
|
{ IPDC_TAG(0x0a) + 0x11, "CAP ADSL Card" },
|
|
{ IPDC_TAG(0x0a) + 0x12, "DMT ADSL Card" },
|
|
{ IPDC_TAG(0x0a) + 0x13, "Standalone Modem Controller" },
|
|
{ IPDC_TAG(0x0a) + 0x14, "32-port IDSL Card" },
|
|
{ IPDC_TAG(0x0a) + 0x15, "10-line Unchannelized E1" },
|
|
{ IPDC_TAG(0x0a) + 0x16, "36-modem (Analog) 2 Card" },
|
|
{ IPDC_TAG(0x0a) + 0x17, "CSMX Modem Card" },
|
|
{ IPDC_TAG(0x0a) + 0x18, "UDS3 Card" },
|
|
{ IPDC_TAG(0x0a) + 0x19, "DS3 ATM Card" },
|
|
{ IPDC_TAG(0x0a) + 0x1A, "4-port Ethernet 2 Card" },
|
|
{ IPDC_TAG(0x0a) + 0x1B, "192 HDLC 2 Card" },
|
|
{ IPDC_TAG(0x0a) + 0x1C, "SDSL 70 Data Card" },
|
|
{ IPDC_TAG(0x0a) + 0x1D, "MADD Card" },
|
|
{ IPDC_TAG(0x0a) + 0x1E, "SDSL 70 Voice Card" },
|
|
{ IPDC_TAG(0x0a) + 0x1F, "OC3 Daughter Card" },
|
|
{ IPDC_TAG(0x0a) + 0x20, "OC3 ATM Card" },
|
|
{ IPDC_TAG(0x0a) + 0x21, "4-port Ethernet 3 Card" },
|
|
{ IPDC_TAG(0x0a) + 0x22, "SRS Ethernet Card" },
|
|
{ IPDC_TAG(0x0a) + 0x23, "SDSL ATM Card" },
|
|
{ IPDC_TAG(0x0a) + 0x24, "AL DADSL ATM Card" },
|
|
{ IPDC_TAG(0x0a) + 0x25, "CSM3V Modem Card" },
|
|
{ IPDC_TAG(0x0a) + 0x26, "HDLC2EC Card" },
|
|
{ IPDC_TAG(0x0a) + 0x27, "DS3 Daughter Card" },
|
|
{ IPDC_TAG(0x0a) + 0x28, "2-port Ethernet Card" },
|
|
{ IPDC_TAG(0x0a) + 0x2A, "STM0 Card" },
|
|
{ IPDC_TAG(0x0a) + 0x2B, "SDSL Ripper Card" },
|
|
{ IPDC_TAG(0x0a) + 0x2F, "Stinger Terminator Card" },
|
|
{ IPDC_TAG(0x0a) + 0x30, "GS DADSL Ripper Card" },
|
|
{ IPDC_TAG(0x0a) + 0x31, "PCTFIT Card" },
|
|
{ IPDC_TAG(0x0a) + 0x32, "PCTFIE Card" },
|
|
{ IPDC_TAG(0x0a) + 0x33, "CT DADSL GLITE Card" },
|
|
{ IPDC_TAG(0x0a) + 0x34, "DS3 ATM 2 Card" },
|
|
{ IPDC_TAG(0x0a) + 0x35, "E3 ATM Card" },
|
|
{ IPDC_TAG(0x0a) + 0x36, "24-line Stinger IMA T1 Card" },
|
|
{ IPDC_TAG(0x0a) + 0x37, "MADD 2 Card" },
|
|
{ IPDC_TAG(0x0a) + 0x38, "GS HDSL 2 Card" },
|
|
{ IPDC_TAG(0x0a) + 0x39, "32-line Stinger IDSL Card" },
|
|
{ IPDC_TAG(0x0a) + 0x3A, "ANNEXB DADSL ATM Card" },
|
|
{ IPDC_TAG(0x0a) + 0x3B, "24-line Stinger IMA E1 Card" },
|
|
{ IPDC_TAG(0x0a) + 0x3C, "40C CT DADSL ATM Card" },
|
|
{ IPDC_TAG(0x0a) + 0x3D, "4-port Ethernet 3+ Card" },
|
|
{ IPDC_TAG(0x0a) + 0x3E, "CLPMT Card" },
|
|
{ IPDC_TAG(0x0a) + 0x3F, "CLPME Card" },
|
|
{ IPDC_TAG(0x0a) + 0x40, "E3 Daughter Card" },
|
|
{ IPDC_TAG(0x0a) + 0x41, "8-line Stinger IMA T1 Card" },
|
|
{ IPDC_TAG(0x0a) + 0x42, "8-line Stinger IMA E1 Card" },
|
|
{ IPDC_TAG(0x0a) + 0x43, "48A GS DADSL ATM Card" },
|
|
{ IPDC_TAG(0x0a) + 0x44, "48B GS DADSL ATM Card" },
|
|
{ IPDC_TAG(0x0a) + 0x45, "48C GS DADSL ATM Card" },
|
|
{ IPDC_TAG(0x0a) + 0x46, "40A CT DADSL ATM Card" },
|
|
{ IPDC_TAG(0x0a) + 0x47, "OC3 ATM 2 Card" },
|
|
{ IPDC_TAG(0x0a) + 0x48, "4-port Serial WAN 2 Card" },
|
|
{ IPDC_TAG(0x0a) + 0x49, "CDS3 LIM Card" },
|
|
{ IPDC_TAG(0x0a) + 0x4A, "R7000 Card" },
|
|
{ IPDC_TAG(0x0a) + 0x4B, "VPN Card" },
|
|
{ IPDC_TAG(0x0a) + 0x4C, "HSE Card" },
|
|
{ IPDC_TAG(0x0a) + 0x4D, "MADD 3 Card" },
|
|
{ IPDC_TAG(0x0a) + 0x4E, "Stinger CM V2 Card" },
|
|
{ IPDC_TAG(0x0a) + 0x4F, "COC3 LIM Card" },
|
|
{ IPDC_TAG(0x0a) + 0x50, "Stinger SHDSL Card" },
|
|
{ IPDC_TAG(0x0a) + 0x51, "2-port OC34-port DS3 Daughter Card" },
|
|
{ IPDC_TAG(0x0a) + 0x52, "72-line DADSL ATM Card" },
|
|
{ IPDC_TAG(0x0a) + 0x53, "36-line DMT MRT Card" },
|
|
{ IPDC_TAG(0x0a) + 0x54, "24-line T1 Card" },
|
|
{ IPDC_TAG(0x0a) + 0x55, "24-line E1 Card" },
|
|
{ IPDC_TAG(0x0a) + 0x56, "Stinger MRT CM Card" },
|
|
{ IPDC_TAG(0x0a) + 0x57, "CSTM1 LIM Card" },
|
|
/* Module status */
|
|
{ IPDC_TAG(0x0c) + 0x00, "Not present (empty)" },
|
|
{ IPDC_TAG(0x0c) + 0x01, "Out of service (down)" },
|
|
{ IPDC_TAG(0x0c) + 0x02, "Up" },
|
|
{ IPDC_TAG(0x0c) + 0x03, "Error" },
|
|
{ IPDC_TAG(0x0c) + 0x04, "Does not exist" },
|
|
/* Line status */
|
|
{ IPDC_TAG(0x14) + 0x00, "Not present" },
|
|
{ IPDC_TAG(0x14) + 0x01, "Disabled" },
|
|
{ IPDC_TAG(0x14) + 0x02, "Red alarm (loss of sync)" },
|
|
{ IPDC_TAG(0x14) + 0x03, "Yellow alarm" },
|
|
{ IPDC_TAG(0x14) + 0x04, "Other alarms or errors" },
|
|
{ IPDC_TAG(0x14) + 0x05, "Up" },
|
|
{ IPDC_TAG(0x14) + 0x06, "Loopback" },
|
|
/* Bearer capability */
|
|
{ IPDC_TAG(0x17) + 0x00, "Voice call" },
|
|
{ IPDC_TAG(0x17) + 0x08, "64K data call" },
|
|
{ IPDC_TAG(0x17) + 0x09, "56K data call" },
|
|
{ IPDC_TAG(0x17) + 0x10,
|
|
"Modem call (3.1K Audio call) (applies to RCSI for modem call only)" },
|
|
/* Line status array */
|
|
/* { IPDC_TAG(0x21) + 0x0, "" }, */
|
|
/* Channel status array */
|
|
/* { IPDC_TAG(0x23) + 0x0, "" }, */
|
|
/* Requested module state */
|
|
{ IPDC_TAG(0x24) + 0x00, "Out of service" },
|
|
{ IPDC_TAG(0x24) + 0x01, "Initialize (bring up)" },
|
|
/* Requested line state */
|
|
{ IPDC_TAG(0x25) + 0x00, "Disable" },
|
|
{ IPDC_TAG(0x25) + 0x01, "Enable" },
|
|
{ IPDC_TAG(0x25) + 0x02, "Start loopback" },
|
|
{ IPDC_TAG(0x25) + 0x03, "Terminate loopback" },
|
|
/* Requested channel status action */
|
|
{ IPDC_TAG(0x26) + 0x00, "Reset to idle" },
|
|
{ IPDC_TAG(0x26) + 0x01, "Reset to out of service" },
|
|
{ IPDC_TAG(0x26) + 0x02, "Start loopback" },
|
|
{ IPDC_TAG(0x26) + 0x03, "Terminate loopback" },
|
|
/* Set channel status option */
|
|
{ IPDC_TAG(0x27) + 0x00,
|
|
"Do not perform the indicated action if any of the" \
|
|
"channels is not in the valid initial state" },
|
|
{ IPDC_TAG(0x27) + 0x01,
|
|
"Perform the indicated action on channels that are on" \
|
|
"the valid initial state. Other channels are not affected" },
|
|
/* Set channel status result */
|
|
{ IPDC_TAG(0x2a) + 0x00,
|
|
"action successfully performed in all channels" },
|
|
{ IPDC_TAG(0x2a) + 0x01, "at least one channel failed" },
|
|
/* Prepare for continuity check result */
|
|
{ IPDC_TAG(0x2b) + 0x00, "Resources reserved successfully" },
|
|
{ IPDC_TAG(0x2b) + 0x01, "Resource not available" },
|
|
/* Continuity test result */
|
|
{ IPDC_TAG(0x2d) + 0x00, "Test completed successfully" },
|
|
{ IPDC_TAG(0x2d) + 0x01, "Test failed" },
|
|
/* Tone listen completion status */
|
|
{ IPDC_TAG(0x35) + 0x00, "Timeout" },
|
|
{ IPDC_TAG(0x35) + 0x01, "No resources available for this operation" },
|
|
{ IPDC_TAG(0x35) + 0x02, "Operation terminated by the SS" },
|
|
{ IPDC_TAG(0x35) + 0x03, "Tone-to-complete-collection received" },
|
|
{ IPDC_TAG(0x35) + 0x04,
|
|
"The specified maximum number of tones received" },
|
|
{ IPDC_TAG(0x35) + 0x05, "Wait between successive tones too long" },
|
|
/* Tone send completion status */
|
|
{ IPDC_TAG(0x36) + 0x00, "Operation succeeded" },
|
|
{ IPDC_TAG(0x36) + 0x01, "Operation failed" },
|
|
{ IPDC_TAG(0x36) + 0x02, "Operation terminated by SS" },
|
|
{ IPDC_TAG(0x36) + 0x03, "Operation started" },
|
|
{ IPDC_TAG(0x36) + 0x04,
|
|
"Operation terminated by administrative action" },
|
|
/* DTMF send format */
|
|
{ IPDC_TAG(0x3c) + 0x00, "Tone" },
|
|
{ IPDC_TAG(0x3c) + 0x01, "Event" },
|
|
{ IPDC_TAG(0x3c) + 0x02, "Both (default)" },
|
|
/* Tone Type */
|
|
{ IPDC_TAG(0x49) + 0x00, "MF Tone" },
|
|
{ IPDC_TAG(0x49) + 0x01, "DTMF Tone" },
|
|
{ IPDC_TAG(0x49) + 0x02, "Analog Test Tone" },
|
|
{ IPDC_TAG(0x49) + 0x03, "Announcement" },
|
|
{ IPDC_TAG(0x49) + 0x04, "Digital Milli-watt tone" },
|
|
{ IPDC_TAG(0x49) + 0x05, "Supplemental tones" },
|
|
{ IPDC_TAG(0x49) + 0x06,
|
|
"Fax tone (CED, no phase reversal, or V.21 flags)" },
|
|
{ IPDC_TAG(0x49) + 0x07, "Modem tone (CED, phase reversal)" },
|
|
{ IPDC_TAG(0x49) + 0x41, "Ringback tone" },
|
|
/* Apply/Cancel Tone */
|
|
{ IPDC_TAG(0x4a) + 0x00, "Apply tone" },
|
|
{ IPDC_TAG(0x4a) + 0x01, "Cancel tone" },
|
|
{ IPDC_TAG(0x4a) + 0x02, "Listen for tone" },
|
|
/* Source port type */
|
|
{ IPDC_TAG(0x65) + 0x00, "SCN channel" },
|
|
/* Destination port type */
|
|
{ IPDC_TAG(0x66) + 0x01, "RTP port" },
|
|
/* RTP Port Status */
|
|
{ IPDC_TAG(0x6a) + 0x00, "Idle", },
|
|
{ IPDC_TAG(0x6a) + 0x01, "Active" },
|
|
/* Receive Encoding Type */
|
|
{ IPDC_TAG(0x6f) + 0x00, "PCMU (G.711 mu-law)" },
|
|
{ IPDC_TAG(0x6f) + 0x04, "G723.1" },
|
|
{ IPDC_TAG(0x6f) + 0x08, "PCMA (G.711 A-law)" },
|
|
{ IPDC_TAG(0x6f) + 0x12, "G729A" },
|
|
{ IPDC_TAG(0x6f) + 0x60, "Transparent data encoding" },
|
|
{ IPDC_TAG(0x6f) + 0x61, "T.38 fax over UPD" },
|
|
/* Send Encoding Type */
|
|
{ IPDC_TAG(0x70) + 0x00, "PCMU (G.711 mu-law)" },
|
|
{ IPDC_TAG(0x70) + 0x04, "G723.1" },
|
|
{ IPDC_TAG(0x70) + 0x08, "PCMA (G.711 A-law)" },
|
|
{ IPDC_TAG(0x70) + 0x12, "G729A" },
|
|
{ IPDC_TAG(0x70) + 0x60, "Transparent data encoding" },
|
|
{ IPDC_TAG(0x70) + 0x61, "T.38 fax over UPD" },
|
|
/* Comfort Noise Generation */
|
|
{ IPDC_TAG(0x72) + 0x00, "off" },
|
|
{ IPDC_TAG(0x72) + 0x01, "on" },
|
|
/* Echo Cancellation */
|
|
{ IPDC_TAG(0x74) + 0x00, "Off" },
|
|
{ IPDC_TAG(0x74) + 0x01, "On, 16 ms tail" },
|
|
{ IPDC_TAG(0x74) + 0x02, "On, 32 ms tail (default)" },
|
|
{ IPDC_TAG(0x74) + 0x03, "On, 64ms tail" },
|
|
/* Constant DTMF Tone Detection on/off */
|
|
{ IPDC_TAG(0x75) + 0x00, "Off" },
|
|
{ IPDC_TAG(0x75) + 0x01, "On (Default)" },
|
|
/* Constant MF Tone Detection on/off" */
|
|
{ IPDC_TAG(0x76) + 0x00, "Off (Default)" },
|
|
{ IPDC_TAG(0x76) + 0x01, "On" },
|
|
/* Constant Fax tone detection on/off */
|
|
{ IPDC_TAG(0x77) + 0x00, "Off" },
|
|
{ IPDC_TAG(0x77) + 0x00, "On (Default)" },
|
|
/* Constant Modem tone detection on/off */
|
|
{ IPDC_TAG(0x78) + 0x00, "Off" },
|
|
{ IPDC_TAG(0x78) + 0x01, "On (Default)" },
|
|
/* Constant Packet Loss Detection on/off */
|
|
{ IPDC_TAG(0x7b) + 0x00, "Off" },
|
|
{ IPDC_TAG(0x7b) + 0x01, "On (Default)" },
|
|
/* Constant Latency Threshold Detection on/off */
|
|
{ IPDC_TAG(0x7d) + 0x00, "Off" },
|
|
{ IPDC_TAG(0x7d) + 0x01, "On (Default)" },
|
|
/* Announcement treatment */
|
|
{ IPDC_TAG(0x86) + 0x00, "Continuous play" },
|
|
{ IPDC_TAG(0x86) + 0x01, "Play 1 time and terminate the call" },
|
|
{ IPDC_TAG(0x86) + 0x02, "Play 2 times and terminate the call" },
|
|
{ IPDC_TAG(0x86) + 0x03, "Play 3 times and terminate the call" },
|
|
{ IPDC_TAG(0x86) + 0x04, "Play 4 times and terminate the call" },
|
|
{ IPDC_TAG(0x86) + 0x05, "Play 5 times and terminate the call" },
|
|
/* Packet Statistics Reset Indicator */
|
|
{ IPDC_TAG(0x90) + 0x00, "Do not reset" },
|
|
{ IPDC_TAG(0x90) + 0x01, "Reset (default)" },
|
|
/* Protocol Type */
|
|
{ IPDC_TAG(0xa1) + 0x01, "ITU-T Q931" },
|
|
{ IPDC_TAG(0xa1) + 0x02, "Nortel-ISDN" },
|
|
{ IPDC_TAG(0xa1) + 0x03, "5ESS-ISDN" },
|
|
{ IPDC_TAG(0xa1) + 0x04, "Euro-ISDN" },
|
|
/* Global call ID Refer Annex A */
|
|
/* IPDC_TAG(0xa4) .... */
|
|
/* User information line 1 proto */
|
|
/* IPDC_TAG(0xa5) .... */
|
|
/* Congestion level indicator */
|
|
{ IPDC_TAG(0xa6) + 0x00, "No Congestion" },
|
|
{ IPDC_TAG(0xa6) + 0x01, "Congestion Level 1" },
|
|
{ IPDC_TAG(0xa6) + 0x02, "Congestion Level 2" },
|
|
/* RADIUS Ascend-auth-type */
|
|
{ IPDC_TAG(0xa7) + 0x00, "None" },
|
|
{ IPDC_TAG(0xa7) + 0x01, "Any" },
|
|
{ IPDC_TAG(0xa7) + 0x02, "PAP (Default)" },
|
|
{ IPDC_TAG(0xa7) + 0x03, "CHAP" },
|
|
{ IPDC_TAG(0xa7) + 0x03, "MS-CHAP" },
|
|
/* Link status */
|
|
{ IPDC_TAG(0xb0) + 0x00, "Successfully connected" },
|
|
{ IPDC_TAG(0xb0) + 0x01, "Not connected" },
|
|
/* Action request */
|
|
{ IPDC_TAG(0xb1) + 0x00, "Registration request" },
|
|
/* Calling Party Info */
|
|
/* Called Party Info */
|
|
/* Country Code */
|
|
{ IPDC_TAG(0xc1) + 0x00, "Argentina" },
|
|
{ IPDC_TAG(0xc1) + 0x02, "Australia" },
|
|
{ IPDC_TAG(0xc1) + 0x03, "Belgium" },
|
|
{ IPDC_TAG(0xc1) + 0x04, "China" },
|
|
{ IPDC_TAG(0xc1) + 0x05, "Costa Rica" },
|
|
{ IPDC_TAG(0xc1) + 0x06, "Finland" },
|
|
{ IPDC_TAG(0xc1) + 0x07, "France" },
|
|
{ IPDC_TAG(0xc1) + 0x08, "Germany" },
|
|
{ IPDC_TAG(0xc1) + 0x09, "Hong Kong" },
|
|
{ IPDC_TAG(0xc1) + 0x0a, "Italy" },
|
|
{ IPDC_TAG(0xc1) + 0x0b, "Japan" },
|
|
{ IPDC_TAG(0xc1) + 0x0c, "Korea" },
|
|
{ IPDC_TAG(0xc1) + 0x0d, "Mexico" },
|
|
{ IPDC_TAG(0xc1) + 0x0e, "Netherlands" },
|
|
{ IPDC_TAG(0xc1) + 0x0f, "New Zealand" },
|
|
{ IPDC_TAG(0xc1) + 0x10, "Singapore" },
|
|
{ IPDC_TAG(0xc1) + 0x11, "Spain" },
|
|
{ IPDC_TAG(0xc1) + 0x12, "Sweden" },
|
|
{ IPDC_TAG(0xc1) + 0x13, "Switzerland" },
|
|
{ IPDC_TAG(0xc1) + 0x14, "UK" },
|
|
{ IPDC_TAG(0xc1) + 0x15, "US" },
|
|
{ IPDC_TAG(0xc1) + 0x15, "Brazil" },
|
|
{ 0, NULL },
|
|
};
|