forked from osmocom/wireshark
![Lars Christensen](/assets/img/avatar_default.png)
When dissecting USBIP packets, the transfer type is not known for every packet like when dissecting usbmon captures. This patch lifs the transfer type for the endpoint in the device descriptor and stores it in the conversation. If the per-packet transfer type is unknown for a transfer, it tries the one from the descriptor instead. This enables bulk/iso payload dissectors to work on USBIP packets too. Change-Id: If0a3e4f3b9598f586fa460d0d07032d22e203122 Reviewed-on: https://code.wireshark.org/review/28412 Reviewed-by: Jaap Keuter <jaap.keuter@xs4all.nl> Petri-Dish: Jaap Keuter <jaap.keuter@xs4all.nl> Tested-by: Petri Dish Buildbot Reviewed-by: Anders Broman <a.broman58@gmail.com>
293 lines
9.5 KiB
C
293 lines
9.5 KiB
C
/* packet-usb.h
|
|
*
|
|
* Wireshark - Network traffic analyzer
|
|
* By Gerald Combs <gerald@wireshark.org>
|
|
* Copyright 1998 Gerald Combs
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0-or-later
|
|
*/
|
|
|
|
#ifndef __PACKET_USB_H__
|
|
#define __PACKET_USB_H__
|
|
|
|
#include <epan/value_string.h>
|
|
#include <epan/wmem/wmem.h>
|
|
#include <epan/conversation.h>
|
|
|
|
typedef struct _usb_address_t {
|
|
guint32 device;
|
|
guint32 endpoint;
|
|
guint16 bus_id;
|
|
} usb_address_t;
|
|
#define USB_ADDR_LEN (sizeof(usb_address_t))
|
|
|
|
/* Flag used to mark usb_address_t.endpoint as an interface
|
|
* address instead of the normal endpoint address.
|
|
*/
|
|
#define INTERFACE_PORT 0x80000000
|
|
|
|
|
|
typedef struct _usb_conv_info_t usb_conv_info_t;
|
|
|
|
/* header type */
|
|
typedef enum {
|
|
USB_HEADER_LINUX_48_BYTES,
|
|
USB_HEADER_LINUX_64_BYTES,
|
|
USB_HEADER_USBPCAP,
|
|
USB_HEADER_MAUSB,
|
|
USB_HEADER_USBIP,
|
|
USB_HEADER_DARWIN
|
|
} usb_header_t;
|
|
|
|
#define USB_HEADER_IS_LINUX(type) \
|
|
((type) == USB_HEADER_LINUX_48_BYTES || (type) == USB_HEADER_LINUX_64_BYTES)
|
|
|
|
/* there is one such structure for each request/response */
|
|
typedef struct _usb_trans_info_t {
|
|
guint32 request_in;
|
|
guint32 response_in;
|
|
nstime_t req_time;
|
|
usb_header_t header_type;
|
|
|
|
/* Valid only for SETUP transactions */
|
|
struct _usb_setup {
|
|
guint8 requesttype;
|
|
guint8 request;
|
|
guint16 wValue;
|
|
guint16 wIndex;
|
|
guint16 wLength;
|
|
} setup;
|
|
|
|
/* Valid only during GET DESCRIPTOR transactions */
|
|
union {
|
|
struct {
|
|
guint8 type;
|
|
guint8 usb_index;
|
|
} get_descriptor;
|
|
} u;
|
|
|
|
|
|
/* used to pass the interface class from the
|
|
* interface descriptor onto the endpoint
|
|
* descriptors so that we can create a
|
|
* conversation with the appropriate class
|
|
* once we know the endpoint.
|
|
* Valid only during GET CONFIGURATION response.
|
|
*/
|
|
usb_conv_info_t *interface_info;
|
|
|
|
guint64 usb_id;
|
|
} usb_trans_info_t;
|
|
|
|
enum usb_conv_class_data_type {USB_CONV_UNKNOWN = 0, USB_CONV_U3V, USB_CONV_AUDIO, USB_CONV_VIDEO, USB_CONV_MASS_STORAGE};
|
|
|
|
/* Conversation Structure
|
|
* there is one such structure for each device/endpoint conversation */
|
|
struct _usb_conv_info_t {
|
|
guint16 bus_id;
|
|
guint16 device_address;
|
|
guint8 endpoint;
|
|
gint direction;
|
|
guint8 transfer_type; /* transfer type from URB */
|
|
guint8 descriptor_transfer_type; /* transfer type lifted from the device descriptor */
|
|
guint32 device_protocol;
|
|
gboolean is_request;
|
|
gboolean is_setup;
|
|
guint8 setup_requesttype;
|
|
|
|
guint16 interfaceClass; /* Interface Descriptor - class */
|
|
guint16 interfaceSubclass; /* Interface Descriptor - subclass */
|
|
guint16 interfaceProtocol; /* Interface Descriptor - protocol */
|
|
guint8 interfaceNum; /* Most recent interface number */
|
|
|
|
guint16 deviceVendor; /* Device Descriptor - USB Vendor ID */
|
|
guint32 deviceProduct; /* Device Descriptor - USB Product ID - MSBs only for encoding unknown */
|
|
wmem_tree_t *transactions;
|
|
usb_trans_info_t *usb_trans_info; /* pointer to the current transaction */
|
|
|
|
void *class_data; /* private class/id decode data */
|
|
enum usb_conv_class_data_type class_data_type;
|
|
|
|
wmem_array_t *alt_settings;
|
|
};
|
|
|
|
/* This is what a tap will tap */
|
|
typedef struct _usb_tap_data_t {
|
|
guint8 urb_type;
|
|
guint8 transfer_type;
|
|
usb_conv_info_t *conv_info;
|
|
usb_trans_info_t *trans_info;
|
|
} usb_tap_data_t;
|
|
|
|
|
|
/* the value for "no endpoint" that's used usb_addr_t, e.g. for the address of the host */
|
|
#define NO_ENDPOINT 0xffffffff
|
|
/* the 8bit version of NO_ENDPOINT, it's used in usb_conv_info_t
|
|
0xff would be an invalid endpoint number (reserved bits are 1) */
|
|
#define NO_ENDPOINT8 ((guint8)(NO_ENDPOINT& G_MAXUINT8))
|
|
|
|
/*
|
|
* Values from the Linux USB pseudo-header.
|
|
*/
|
|
|
|
/*
|
|
* event_type values
|
|
*/
|
|
#define URB_SUBMIT 'S'
|
|
#define URB_COMPLETE 'C'
|
|
#define URB_ERROR 'E'
|
|
|
|
/*
|
|
* URB transfer_type values
|
|
*/
|
|
#define URB_ISOCHRONOUS 0x0
|
|
#define URB_INTERRUPT 0x1
|
|
#define URB_CONTROL 0x2
|
|
#define URB_BULK 0x3
|
|
#define URB_UNKNOWN 0xFF
|
|
|
|
#define URB_TRANSFER_IN 0x80 /* to host */
|
|
|
|
|
|
/* http://www.usb.org/developers/defined_class */
|
|
#define IF_CLASS_DEVICE 0x00
|
|
#define IF_CLASS_AUDIO 0x01
|
|
#define IF_CLASS_COMMUNICATIONS 0x02
|
|
#define IF_CLASS_HID 0x03
|
|
#define IF_CLASS_PHYSICAL 0x05
|
|
#define IF_CLASS_IMAGE 0x06
|
|
#define IF_CLASS_PRINTER 0x07
|
|
#define IF_CLASS_MASS_STORAGE 0x08
|
|
#define IF_CLASS_HUB 0x09
|
|
#define IF_CLASS_CDC_DATA 0x0a
|
|
#define IF_CLASS_SMART_CARD 0x0b
|
|
#define IF_CLASS_CONTENT_SECURITY 0x0d
|
|
#define IF_CLASS_VIDEO 0x0e
|
|
#define IF_CLASS_PERSONAL_HEALTHCARE 0x0f
|
|
#define IF_CLASS_AUDIO_VIDEO 0x10
|
|
#define IF_CLASS_DIAGNOSTIC_DEVICE 0xdc
|
|
#define IF_CLASS_WIRELESS_CONTROLLER 0xe0
|
|
#define IF_CLASS_MISCELLANEOUS 0xef
|
|
#define IF_CLASS_APPLICATION_SPECIFIC 0xfe
|
|
#define IF_CLASS_VENDOR_SPECIFIC 0xff
|
|
|
|
#define IF_CLASS_UNKNOWN 0xffff
|
|
#define IF_SUBCLASS_UNKNOWN 0xffff
|
|
#define IF_PROTOCOL_UNKNOWN 0xffff
|
|
#define DEV_VENDOR_UNKNOWN 0x0000 /* this id is unassigned */
|
|
#define DEV_PRODUCT_UNKNOWN 0xfffffff /* 0x0000 and 0xffff are used values by vendors, so MSBs encode unknown */
|
|
|
|
#define IF_SUBCLASS_MISC_U3V 0x05
|
|
|
|
/* bmRequestType values */
|
|
#define USB_DIR_OUT 0 /* to device */
|
|
#define USB_DIR_IN 0x80 /* to host */
|
|
|
|
#define USB_TYPE_MASK (0x03 << 5)
|
|
#define USB_TYPE(type) (((type) & USB_TYPE_MASK) >> 5)
|
|
#define RQT_SETUP_TYPE_STANDARD 0
|
|
#define RQT_SETUP_TYPE_CLASS 1
|
|
#define RQT_SETUP_TYPE_VENDOR 2
|
|
|
|
#define USB_RECIPIENT_MASK 0x1F
|
|
#define USB_RECIPIENT(type) ((type) & USB_RECIPIENT_MASK)
|
|
#define RQT_SETUP_RECIPIENT_DEVICE 0
|
|
#define RQT_SETUP_RECIPIENT_INTERFACE 1
|
|
#define RQT_SETUP_RECIPIENT_ENDPOINT 2
|
|
#define RQT_SETUP_RECIPIENT_OTHER 3
|
|
|
|
/* Endpoint descriptor bmAttributes */
|
|
#define ENDPOINT_TYPE(ep_attrib) ((ep_attrib) & 0x03)
|
|
#define ENDPOINT_TYPE_CONTROL 0
|
|
#define ENDPOINT_TYPE_ISOCHRONOUS 1
|
|
#define ENDPOINT_TYPE_BULK 2
|
|
#define ENDPOINT_TYPE_INTERRUPT 3
|
|
|
|
|
|
#define USB_SETUP_GET_STATUS 0
|
|
#define USB_SETUP_CLEAR_FEATURE 1
|
|
#define USB_SETUP_SET_FEATURE 3
|
|
#define USB_SETUP_SET_ADDRESS 5
|
|
#define USB_SETUP_GET_DESCRIPTOR 6
|
|
#define USB_SETUP_SET_DESCRIPTOR 7
|
|
#define USB_SETUP_GET_CONFIGURATION 8
|
|
#define USB_SETUP_SET_CONFIGURATION 9
|
|
#define USB_SETUP_GET_INTERFACE 10
|
|
#define USB_SETUP_SET_INTERFACE 11
|
|
#define USB_SETUP_SYNCH_FRAME 12
|
|
#define USB_SETUP_SET_SEL 48
|
|
#define USB_SETUP_SET_ISOCH_DELAY 49
|
|
|
|
/* transfer_flags */
|
|
#define URB_SHORT_NOT_OK 0x0001 /* report short reads as errors */
|
|
#define URB_ISO_ASAP 0x0002 /* iso-only; use the first unexpired
|
|
* slot in the schedule */
|
|
#define URB_NO_TRANSFER_DMA_MAP 0x0004 /* urb->transfer_dma valid on submit */
|
|
#define URB_NO_FSBR 0x0020 /* UHCI-specific */
|
|
#define URB_ZERO_PACKET 0x0040 /* Finish bulk OUT with short packet */
|
|
#define URB_NO_INTERRUPT 0x0080 /* HINT: no non-error interrupt
|
|
* needed */
|
|
#define URB_FREE_BUFFER 0x0100 /* Free transfer buffer with the URB */
|
|
|
|
/* The following flags are used internally by usbcore and HCDs */
|
|
#define URB_DIR_IN 0x0200 /* Transfer from device to host */
|
|
#define URB_DIR_OUT 0
|
|
#define URB_DIR_MASK URB_DIR_IN
|
|
|
|
#define URB_DMA_MAP_SINGLE 0x00010000 /* Non-scatter-gather mapping */
|
|
#define URB_DMA_MAP_PAGE 0x00020000 /* HCD-unsupported S-G */
|
|
#define URB_DMA_MAP_SG 0x00040000 /* HCD-supported S-G */
|
|
#define URB_MAP_LOCAL 0x00080000 /* HCD-local-memory mapping */
|
|
#define URB_SETUP_MAP_SINGLE 0x00100000 /* Setup packet DMA mapped */
|
|
#define URB_SETUP_MAP_LOCAL 0x00200000 /* HCD-local setup packet */
|
|
#define URB_DMA_SG_COMBINED 0x00400000 /* S-G entries were combined */
|
|
#define URB_ALIGNED_TEMP_BUFFER 0x00800000 /* Temp buffer was alloc'd */
|
|
|
|
|
|
/* 9.6.6 */
|
|
extern const true_false_string tfs_endpoint_direction;
|
|
|
|
extern value_string_ext usb_class_vals_ext;
|
|
|
|
usb_conv_info_t *get_usb_iface_conv_info(packet_info *pinfo, guint8 interface_num);
|
|
|
|
proto_item * dissect_usb_descriptor_header(proto_tree *tree,
|
|
tvbuff_t *tvb, int offset,
|
|
value_string_ext *type_val_str);
|
|
|
|
void dissect_usb_endpoint_address(proto_tree *tree, tvbuff_t *tvb, int offset);
|
|
|
|
int
|
|
dissect_usb_endpoint_descriptor(packet_info *pinfo, proto_tree *parent_tree,
|
|
tvbuff_t *tvb, int offset,
|
|
usb_conv_info_t *usb_conv_info);
|
|
|
|
int
|
|
dissect_usb_unknown_descriptor(packet_info *pinfo _U_, proto_tree *parent_tree,
|
|
tvbuff_t *tvb, int offset,
|
|
usb_conv_info_t *usb_conv_info _U_);
|
|
|
|
int
|
|
dissect_urb_transfer_flags(tvbuff_t *tvb, int offset, proto_tree* tree, int hf, int endian);
|
|
|
|
struct mausb_header;
|
|
|
|
void
|
|
dissect_usb_common(tvbuff_t *tvb, packet_info *pinfo, proto_tree *parent,
|
|
usb_header_t header_type, void *extra_data);
|
|
|
|
#endif
|
|
|
|
/*
|
|
* Editor modelines - http://www.wireshark.org/tools/modelines.html
|
|
*
|
|
* Local variables:
|
|
* c-basic-offset: 4
|
|
* tab-width: 8
|
|
* indent-tabs-mode: nil
|
|
* End:
|
|
*
|
|
* vi: set shiftwidth=4 tabstop=8 expandtab:
|
|
* :indentSize=4:tabSize=8:noTabs=true:
|
|
*/
|