forked from osmocom/wireshark
B4 frames have no length octet at L2 level, but instead a L2 pseudo length octet at L3. We must call the proper dissector for decoding them, and gsm_a_ccch supports L2 pseudo length. This addresses the LAPDm side of https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=14105 Ping-Bug: 14105 Change-Id: I5743dc6153a1adae60b8d9564f345861edc3fca4 Reviewed-on: https://code.wireshark.org/review/26798 Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com> Tested-by: Petri Dish Buildbot Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
570 lines
20 KiB
C
570 lines
20 KiB
C
/* packet-lapdm.c
|
|
* Routines for LAPDm frame disassembly
|
|
* Duncan Salerno <duncan.salerno@googlemail.com>
|
|
*
|
|
* Wireshark - Network traffic analyzer
|
|
* By Gerald Combs <gerald@wireshark.org>
|
|
* Copyright 1998
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0-or-later
|
|
*/
|
|
|
|
/* LAPDm references:
|
|
*
|
|
* Mobile Station - Base Stations System (MS - BSS) Interface Data Link (DL) Layer Specification
|
|
* Base Station Controller - Base Transceiver Station (BSC - BTS) interface; Layer 2 specification
|
|
* http://www.3gpp.org/ftp/Specs/html-info/44006.htm
|
|
*
|
|
* From 3GPP TS 44.006:
|
|
*
|
|
* LAPDm is used for information sent on the control channels BCCH, AGCH, NCH,
|
|
* PCH, FACCH, SACCH and SDCCH as defined in 3GPP TS 44.003.
|
|
*
|
|
* AGCH, NCH and PCH are sometimes referred to by the collective name CCCH.
|
|
* FACCH, SACCH and SDCCH are, similarly, referred to by the collective name DCCH.
|
|
*
|
|
* Format A is used on DCCHs for frames where there is no information field.
|
|
* Formats B, Bter and B4 are used on DCCHs for frames containing an information field:
|
|
* Format Bter is used on request of higher layers if and only if short L2 header type 1 is
|
|
* supported and a UI command is to be transmitted on SAPI 0;
|
|
* Format B4 is used for UI frames transmitted by the network on SACCH;
|
|
* Format B is applied in all other cases.
|
|
* Format Bbis is used only on BCCH, PCH, NCH, and AGCH.
|
|
* In addition there is a Format C for transmission of random access signals.
|
|
*
|
|
* This module currently supports A, B, B4
|
|
* In the future will support Bter
|
|
* Bbis and C should be supported elsewhere
|
|
*/
|
|
|
|
#include "config.h"
|
|
#include "packet-lapdm.h"
|
|
|
|
#include <epan/packet.h>
|
|
#include <epan/prefs.h>
|
|
#include <epan/xdlc.h>
|
|
#include <epan/reassemble.h>
|
|
#include <epan/conversation.h>
|
|
|
|
void proto_register_lapdm(void);
|
|
|
|
static dissector_handle_t b4_info_handle;
|
|
|
|
static int proto_lapdm = -1;
|
|
static int hf_lapdm_address = -1;
|
|
static int hf_lapdm_ea = -1;
|
|
static int hf_lapdm_cr = -1;
|
|
static int hf_lapdm_sapi = -1;
|
|
static int hf_lapdm_lpd = -1;
|
|
|
|
static int hf_lapdm_control = -1;
|
|
static int hf_lapdm_n_r = -1;
|
|
static int hf_lapdm_n_s = -1;
|
|
static int hf_lapdm_p = -1;
|
|
static int hf_lapdm_f = -1;
|
|
static int hf_lapdm_s_ftype = -1;
|
|
static int hf_lapdm_u_modifier_cmd = -1;
|
|
static int hf_lapdm_u_modifier_resp = -1;
|
|
static int hf_lapdm_ftype_i = -1;
|
|
static int hf_lapdm_ftype_s_u = -1;
|
|
|
|
static int hf_lapdm_length = -1;
|
|
static int hf_lapdm_el = -1;
|
|
static int hf_lapdm_m = -1;
|
|
static int hf_lapdm_len = -1;
|
|
|
|
/*
|
|
* LAPDm fragment handling
|
|
*/
|
|
static int hf_lapdm_fragment_data = -1;
|
|
static int hf_lapdm_fragments = -1;
|
|
static int hf_lapdm_fragment = -1;
|
|
static int hf_lapdm_fragment_overlap = -1;
|
|
static int hf_lapdm_fragment_overlap_conflicts = -1;
|
|
static int hf_lapdm_fragment_multiple_tails = -1;
|
|
static int hf_lapdm_fragment_too_long_fragment = -1;
|
|
static int hf_lapdm_fragment_error = -1;
|
|
static int hf_lapdm_fragment_count = -1;
|
|
static int hf_lapdm_reassembled_in = -1;
|
|
static int hf_lapdm_reassembled_length = -1;
|
|
|
|
static gint ett_lapdm = -1;
|
|
static gint ett_lapdm_address = -1;
|
|
static gint ett_lapdm_control = -1;
|
|
static gint ett_lapdm_length = -1;
|
|
static gint ett_lapdm_fragment = -1;
|
|
static gint ett_lapdm_fragments = -1;
|
|
|
|
static reassembly_table lapdm_reassembly_table;
|
|
|
|
static wmem_map_t *lapdm_last_n_s_map;
|
|
|
|
static dissector_table_t lapdm_sapi_dissector_table;
|
|
|
|
static gboolean reassemble_lapdm = TRUE;
|
|
|
|
/*
|
|
* Bits in the address field.
|
|
*/
|
|
#define LAPDM_SAPI 0x1c /* Service Access Point Identifier */
|
|
#define LAPDM_SAPI_SHIFT 2
|
|
#define LAPDM_CR 0x02 /* Command/Response bit */
|
|
#define LAPDM_EA 0x01 /* First Address Extension bit */
|
|
#define LAPDM_LPD 0x60 /* Link Protocol Discriminator */
|
|
|
|
/*
|
|
* Bits in the length field.
|
|
*/
|
|
#define LAPDM_EL 0x01 /* Extended Length = 1 */
|
|
#define LAPDM_M 0x02 /* More fragments */
|
|
#define LAPDM_M_SHIFT 1
|
|
#define LAPDM_LEN 0xfc /* Length */
|
|
#define LAPDM_LEN_SHIFT 2
|
|
|
|
#define LAPDM_HEADER_LEN 3
|
|
#define LAPDM_HEADER_LEN_B4 2
|
|
|
|
#define LAPDM_SAPI_RR_CC_MM 0
|
|
#define LAPDM_SAPI_SMS 3
|
|
|
|
/* Used only for U frames */
|
|
static const xdlc_cf_items lapdm_cf_items = {
|
|
&hf_lapdm_n_r,
|
|
&hf_lapdm_n_s,
|
|
&hf_lapdm_p,
|
|
&hf_lapdm_f,
|
|
&hf_lapdm_s_ftype,
|
|
&hf_lapdm_u_modifier_cmd,
|
|
&hf_lapdm_u_modifier_resp,
|
|
&hf_lapdm_ftype_i,
|
|
&hf_lapdm_ftype_s_u
|
|
};
|
|
|
|
static const value_string lapdm_ea_vals[] = {
|
|
{ 0, "More octets" },
|
|
{ 1, "Final octet" },
|
|
{ 0, NULL }
|
|
};
|
|
|
|
static const value_string lapdm_sapi_vals[] = {
|
|
{ LAPDM_SAPI_RR_CC_MM, "RR/MM/CC" },
|
|
{ LAPDM_SAPI_SMS, "SMS/SS" },
|
|
{ 0, NULL }
|
|
};
|
|
|
|
static const value_string lapdm_lpd_vals[] = {
|
|
{ 0, "Normal GSM" },
|
|
{ 1, "Cell broadcast service" },
|
|
{ 0, NULL }
|
|
};
|
|
|
|
static const value_string lapdm_m_vals[] = {
|
|
{ 0, "Last segment" },
|
|
{ 1, "More segments" },
|
|
{ 0, NULL }
|
|
};
|
|
|
|
static const value_string lapdm_el_vals[] = {
|
|
{ 0, "More octets" },
|
|
{ 1, "Final octet" },
|
|
{ 0, NULL }
|
|
};
|
|
|
|
|
|
static const fragment_items lapdm_frag_items = {
|
|
/* Fragment subtrees */
|
|
&ett_lapdm_fragment,
|
|
&ett_lapdm_fragments,
|
|
/* Fragment fields */
|
|
&hf_lapdm_fragments,
|
|
&hf_lapdm_fragment,
|
|
&hf_lapdm_fragment_overlap,
|
|
&hf_lapdm_fragment_overlap_conflicts,
|
|
&hf_lapdm_fragment_multiple_tails,
|
|
&hf_lapdm_fragment_too_long_fragment,
|
|
&hf_lapdm_fragment_error,
|
|
&hf_lapdm_fragment_count,
|
|
/* Reassembled in field */
|
|
&hf_lapdm_reassembled_in,
|
|
/* Reassembled length field */
|
|
&hf_lapdm_reassembled_length,
|
|
/* Reassembled data field */
|
|
NULL,
|
|
/* Tag */
|
|
"fragments"
|
|
};
|
|
|
|
static gboolean hdr_has_length(enum lapdm_hdr_type hdr_type)
|
|
{
|
|
switch (hdr_type) {
|
|
case LAPDM_HDR_FMT_A:
|
|
case LAPDM_HDR_FMT_B:
|
|
return TRUE;
|
|
default:
|
|
return FALSE;
|
|
}
|
|
}
|
|
|
|
|
|
static int
|
|
dissect_lapdm(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree, void* data)
|
|
{
|
|
proto_tree *lapdm_tree, *addr_tree, *length_tree;
|
|
proto_item *lapdm_ti, *addr_ti, *length_ti;
|
|
guint8 addr, length, header_len, cr, sapi, len, n_s;
|
|
int control;
|
|
gboolean m;
|
|
tvbuff_t *payload;
|
|
int available_length;
|
|
gboolean is_response = FALSE;
|
|
enum lapdm_hdr_type hdr_type = LAPDM_HDR_FMT_B;
|
|
|
|
if (data) {
|
|
lapdm_data_t *ld = (lapdm_data_t *) data;
|
|
hdr_type = ld->hdr_type;
|
|
}
|
|
|
|
switch (hdr_type) {
|
|
case LAPDM_HDR_FMT_A:
|
|
case LAPDM_HDR_FMT_B:
|
|
length = tvb_get_guint8(tvb, 2);
|
|
header_len = LAPDM_HEADER_LEN;
|
|
break;
|
|
case LAPDM_HDR_FMT_B4:
|
|
length = 0;
|
|
header_len = LAPDM_HEADER_LEN_B4;
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
|
|
/* Check that there's enough data */
|
|
if (tvb_captured_length(tvb) < header_len)
|
|
return 0;
|
|
|
|
col_set_str(pinfo->cinfo, COL_PROTOCOL, "LAPDm");
|
|
|
|
addr = tvb_get_guint8(tvb, 0);
|
|
|
|
cr = addr & LAPDM_CR;
|
|
if (pinfo->p2p_dir == P2P_DIR_RECV) {
|
|
is_response = cr ? FALSE : TRUE;
|
|
}
|
|
else if (pinfo->p2p_dir == P2P_DIR_SENT) {
|
|
is_response = cr ? TRUE : FALSE;
|
|
}
|
|
|
|
if (tree) {
|
|
lapdm_ti = proto_tree_add_item(tree, proto_lapdm, tvb, 0, header_len, ENC_NA);
|
|
lapdm_tree = proto_item_add_subtree(lapdm_ti, ett_lapdm);
|
|
|
|
addr_ti = proto_tree_add_uint(lapdm_tree, hf_lapdm_address, tvb, 0, 1, addr);
|
|
addr_tree = proto_item_add_subtree(addr_ti, ett_lapdm_address);
|
|
|
|
proto_tree_add_uint(addr_tree, hf_lapdm_lpd, tvb, 0, 1, addr);
|
|
proto_tree_add_uint(addr_tree, hf_lapdm_sapi, tvb, 0, 1, addr);
|
|
proto_tree_add_uint(addr_tree, hf_lapdm_cr, tvb, 0, 1, addr);
|
|
proto_tree_add_uint(addr_tree, hf_lapdm_ea, tvb, 0, 1, addr);
|
|
}
|
|
else {
|
|
lapdm_ti = NULL;
|
|
lapdm_tree = NULL;
|
|
}
|
|
|
|
control = dissect_xdlc_control(tvb, 1, pinfo, lapdm_tree, hf_lapdm_control,
|
|
ett_lapdm_control, &lapdm_cf_items, NULL /* LAPDm doesn't support extended */, NULL, NULL,
|
|
is_response, FALSE, FALSE);
|
|
|
|
/* dissect length field (if present) */
|
|
if (tree && hdr_has_length(hdr_type)) {
|
|
length_ti = proto_tree_add_uint(lapdm_tree, hf_lapdm_length, tvb,
|
|
2, 1, length);
|
|
length_tree = proto_item_add_subtree(length_ti, ett_lapdm_length);
|
|
|
|
proto_tree_add_uint(length_tree, hf_lapdm_len, tvb, 2, 1, length);
|
|
proto_tree_add_uint(length_tree, hf_lapdm_m, tvb, 2, 1, length);
|
|
proto_tree_add_uint(length_tree, hf_lapdm_el, tvb, 2, 1, length);
|
|
}
|
|
|
|
if (hdr_has_length(hdr_type)) {
|
|
len = (length & LAPDM_LEN) >> LAPDM_LEN_SHIFT;
|
|
m = (length & LAPDM_M) >> LAPDM_M_SHIFT;
|
|
} else {
|
|
len = tvb_captured_length(tvb) - header_len;
|
|
m = 0;
|
|
}
|
|
|
|
sapi = (addr & LAPDM_SAPI) >> LAPDM_SAPI_SHIFT;
|
|
n_s = (control & XDLC_N_S_MASK) >> XDLC_N_S_SHIFT;
|
|
available_length = tvb_captured_length(tvb) - header_len;
|
|
|
|
/* No point in doing anything if no payload
|
|
*/
|
|
if( !MIN(len, available_length) )
|
|
return 2;
|
|
|
|
payload = tvb_new_subset_length_caplen(tvb, header_len, MIN(len,available_length), len);
|
|
|
|
/* Potentially segmented I frame
|
|
*/
|
|
if( (control & XDLC_I_MASK) == XDLC_I && reassemble_lapdm && !pinfo->flags.in_error_pkt )
|
|
{
|
|
fragment_head *fd_m = NULL;
|
|
tvbuff_t *reassembled = NULL;
|
|
guint32 fragment_id;
|
|
gboolean save_fragmented = pinfo->fragmented, add_frag;
|
|
|
|
pinfo->fragmented = m;
|
|
|
|
/* Rely on caller to provide a way to group fragments */
|
|
fragment_id = (conversation_get_endpoint_by_id(pinfo, ENDPOINT_GSMTAP, USE_LAST_ENDPOINT) << 4) | (sapi << 1) | pinfo->p2p_dir;
|
|
|
|
if (!PINFO_FD_VISITED(pinfo)) {
|
|
/* Check if new N(S) is equal to previous N(S) (to avoid adding retransmissions in reassembly table)
|
|
As GUINT_TO_POINTER macro does not allow to differentiate NULL from 0, use 1-8 range instead of 0-7 */
|
|
guint *p_last_n_s = (guint*)wmem_map_lookup(lapdm_last_n_s_map, GUINT_TO_POINTER(fragment_id));
|
|
if (GPOINTER_TO_UINT(p_last_n_s) == (guint)(n_s+1)) {
|
|
add_frag = FALSE;
|
|
} else {
|
|
add_frag = TRUE;
|
|
wmem_map_insert(lapdm_last_n_s_map, GUINT_TO_POINTER(fragment_id), GUINT_TO_POINTER(n_s+1));
|
|
}
|
|
} else {
|
|
add_frag = TRUE;
|
|
}
|
|
|
|
if (add_frag) {
|
|
/* This doesn't seem the best way of doing it as doesn't
|
|
take N(S) into account, but N(S) isn't always 0 for
|
|
the first fragment!
|
|
*/
|
|
fd_m = fragment_add_seq_next (&lapdm_reassembly_table, payload, 0,
|
|
pinfo,
|
|
fragment_id, /* guint32 ID for fragments belonging together */
|
|
NULL,
|
|
/*n_s guint32 fragment sequence number */
|
|
len, /* guint32 fragment length */
|
|
m); /* More fragments? */
|
|
|
|
reassembled = process_reassembled_data(payload, 0, pinfo,
|
|
"Reassembled LAPDm", fd_m, &lapdm_frag_items,
|
|
NULL, lapdm_tree);
|
|
|
|
/* Reassembled into this packet
|
|
*/
|
|
if (fd_m && pinfo->num == fd_m->reassembled_in) {
|
|
if (!dissector_try_uint(lapdm_sapi_dissector_table, sapi,
|
|
reassembled, pinfo, tree))
|
|
call_data_dissector(reassembled, pinfo, tree);
|
|
}
|
|
else {
|
|
col_append_str(pinfo->cinfo, COL_INFO, " (Fragment)");
|
|
proto_tree_add_item(lapdm_tree, hf_lapdm_fragment_data, payload, 0, -1, ENC_NA);
|
|
}
|
|
}
|
|
|
|
/* Now reset fragmentation information in pinfo
|
|
*/
|
|
pinfo->fragmented = save_fragmented;
|
|
}
|
|
else if (hdr_type == LAPDM_HDR_FMT_B4)
|
|
{
|
|
/* B4 frames have no length octet at L2 level, but instead a L2 pseudo length octet
|
|
* at L3. We must call the proper dissector for decoding them */
|
|
call_dissector(b4_info_handle, payload, pinfo, tree);
|
|
}
|
|
else
|
|
{
|
|
if (!PINFO_FD_VISITED(pinfo) && ((control & XDLC_S_U_MASK) == XDLC_U) && ((control & XDLC_U_MODIFIER_MASK) == XDLC_SABM)) {
|
|
/* SABM frame; reset the last N(S) to an invalid value */
|
|
guint32 fragment_id = (conversation_get_endpoint_by_id(pinfo, ENDPOINT_GSMTAP, USE_LAST_ENDPOINT) << 4) | (sapi << 1) | pinfo->p2p_dir;
|
|
wmem_map_insert(lapdm_last_n_s_map, GUINT_TO_POINTER(fragment_id), GUINT_TO_POINTER(0));
|
|
}
|
|
|
|
/* Whole packet
|
|
If we have some data, try and dissect it (only happens for UI, SABM, UA or I frames)
|
|
*/
|
|
if (!dissector_try_uint(lapdm_sapi_dissector_table, sapi,
|
|
payload, pinfo, tree))
|
|
call_data_dissector(payload, pinfo, tree);
|
|
}
|
|
return tvb_captured_length(tvb);
|
|
}
|
|
|
|
void
|
|
proto_register_lapdm(void)
|
|
{
|
|
static hf_register_info hf[] = {
|
|
|
|
{ &hf_lapdm_address,
|
|
{ "Address Field", "lapdm.address_field", FT_UINT8, BASE_HEX, NULL, 0x0,
|
|
"Address", HFILL }},
|
|
|
|
{ &hf_lapdm_ea,
|
|
{ "EA", "lapdm.ea", FT_UINT8, BASE_DEC, VALS(lapdm_ea_vals), LAPDM_EA,
|
|
"Address field extension bit", HFILL }},
|
|
|
|
{ &hf_lapdm_cr,
|
|
{ "C/R", "lapdm.cr", FT_UINT8, BASE_DEC, NULL, LAPDM_CR,
|
|
"Command/response field bit", HFILL }},
|
|
|
|
{ &hf_lapdm_lpd,
|
|
{ "LPD", "lapdm.lpd", FT_UINT8, BASE_DEC, VALS(lapdm_lpd_vals), LAPDM_LPD,
|
|
"Link Protocol Discriminator", HFILL }},
|
|
|
|
{ &hf_lapdm_sapi,
|
|
{ "SAPI", "lapdm.sapi", FT_UINT8, BASE_DEC, VALS(lapdm_sapi_vals), LAPDM_SAPI,
|
|
"Service access point identifier", HFILL }},
|
|
|
|
{ &hf_lapdm_control,
|
|
{ "Control Field", "lapdm.control_field", FT_UINT8, BASE_HEX, NULL, 0x0,
|
|
NULL, HFILL }},
|
|
|
|
{ &hf_lapdm_n_r,
|
|
{ "N(R)", "lapdm.control.n_r", FT_UINT8, BASE_DEC,
|
|
NULL, XDLC_N_R_MASK, NULL, HFILL }},
|
|
|
|
{ &hf_lapdm_n_s,
|
|
{ "N(S)", "lapdm.control.n_s", FT_UINT8, BASE_DEC,
|
|
NULL, XDLC_N_S_MASK, NULL, HFILL }},
|
|
|
|
{ &hf_lapdm_p,
|
|
{ "Poll", "lapdm.control.p", FT_BOOLEAN, 8,
|
|
TFS(&tfs_true_false), XDLC_P_F, NULL, HFILL }},
|
|
|
|
{ &hf_lapdm_f,
|
|
{ "Final", "lapdm.control.f", FT_BOOLEAN, 8,
|
|
TFS(&tfs_true_false), XDLC_P_F, NULL, HFILL }},
|
|
|
|
{ &hf_lapdm_s_ftype,
|
|
{ "Supervisory frame type", "lapdm.control.s_ftype", FT_UINT8, BASE_HEX,
|
|
VALS(stype_vals), XDLC_S_FTYPE_MASK, NULL, HFILL }},
|
|
|
|
{ &hf_lapdm_u_modifier_cmd,
|
|
{ "Command", "lapdm.control.u_modifier_cmd", FT_UINT8, BASE_HEX,
|
|
VALS(modifier_vals_cmd), XDLC_U_MODIFIER_MASK, NULL, HFILL }},
|
|
|
|
{ &hf_lapdm_u_modifier_resp,
|
|
{ "Response", "lapdm.control.u_modifier_resp", FT_UINT8, BASE_HEX,
|
|
VALS(modifier_vals_resp), XDLC_U_MODIFIER_MASK, NULL, HFILL }},
|
|
|
|
{ &hf_lapdm_ftype_i,
|
|
{ "Frame type", "lapdm.control.ftype", FT_UINT8, BASE_HEX,
|
|
VALS(ftype_vals), XDLC_I_MASK, NULL, HFILL }},
|
|
|
|
{ &hf_lapdm_ftype_s_u,
|
|
{ "Frame type", "lapdm.control.ftype", FT_UINT8, BASE_HEX,
|
|
VALS(ftype_vals), XDLC_S_U_MASK, NULL, HFILL }},
|
|
|
|
{ &hf_lapdm_length,
|
|
{ "Length Field", "lapdm.length_field", FT_UINT8, BASE_HEX,
|
|
NULL, 0x0, NULL, HFILL }},
|
|
|
|
{ &hf_lapdm_el,
|
|
{ "EL", "lapdm.el", FT_UINT8, BASE_DEC,
|
|
VALS(lapdm_el_vals), LAPDM_EL, "Length indicator field extension bit", HFILL }},
|
|
|
|
{ &hf_lapdm_m,
|
|
{ "M", "lapdm.m", FT_UINT8, BASE_DEC,
|
|
VALS(lapdm_m_vals), LAPDM_M, "More data bit", HFILL }},
|
|
|
|
{ &hf_lapdm_len,
|
|
{ "Length", "lapdm.length", FT_UINT8, BASE_DEC,
|
|
NULL, LAPDM_LEN, "Length indicator", HFILL }},
|
|
|
|
/* Fragment reassembly
|
|
*/
|
|
{ &hf_lapdm_fragment_data,
|
|
{ "Fragment Data", "lapdm.fragment_data", FT_NONE, BASE_NONE,
|
|
NULL, 0x00, NULL, HFILL }},
|
|
|
|
{ &hf_lapdm_fragments,
|
|
{ "Message fragments", "lapdm.fragments", FT_NONE, BASE_NONE,
|
|
NULL, 0x00, "LAPDm Message fragments", HFILL }},
|
|
|
|
{ &hf_lapdm_fragment,
|
|
{ "Message fragment", "lapdm.fragment", FT_FRAMENUM, BASE_NONE,
|
|
NULL, 0x00, "LAPDm Message fragment", HFILL }},
|
|
|
|
{ &hf_lapdm_fragment_overlap,
|
|
{ "Message fragment overlap", "lapdm.fragment.overlap", FT_BOOLEAN, BASE_NONE,
|
|
NULL, 0x0, "LAPDm Message fragment overlaps with other fragment(s)", HFILL }},
|
|
|
|
{ &hf_lapdm_fragment_overlap_conflicts,
|
|
{ "Message fragment overlapping with conflicting data", "lapdm.fragment.overlap.conflicts", FT_BOOLEAN, BASE_NONE,
|
|
NULL, 0x0, "LAPDm Message fragment overlaps with conflicting data", HFILL }},
|
|
|
|
{ &hf_lapdm_fragment_multiple_tails,
|
|
{ "Message has multiple tail fragments", "lapdm.fragment.multiple_tails", FT_BOOLEAN, BASE_NONE,
|
|
NULL, 0x0, "LAPDm Message fragment has multiple tail fragments", HFILL }},
|
|
|
|
{ &hf_lapdm_fragment_too_long_fragment,
|
|
{ "Message fragment too long", "lapdm.fragment.too_long_fragment", FT_BOOLEAN, BASE_NONE,
|
|
NULL, 0x0, "LAPDm Message fragment data goes beyond the packet end", HFILL }},
|
|
|
|
{ &hf_lapdm_fragment_error,
|
|
{ "Message defragmentation error", "lapdm.fragment.error", FT_FRAMENUM, BASE_NONE,
|
|
NULL, 0x00, "LAPDm Message defragmentation error due to illegal fragments", HFILL }},
|
|
|
|
{ &hf_lapdm_fragment_count,
|
|
{ "Message fragment count", "lapdm.fragment.count", FT_UINT32, BASE_DEC,
|
|
NULL, 0x00, NULL, HFILL }},
|
|
|
|
{ &hf_lapdm_reassembled_in,
|
|
{ "Reassembled in", "lapdm.reassembled.in", FT_FRAMENUM, BASE_NONE,
|
|
NULL, 0x00, "LAPDm Message has been reassembled in this packet.", HFILL }},
|
|
|
|
{ &hf_lapdm_reassembled_length,
|
|
{ "Reassembled LAPDm length", "lapdm.reassembled.length", FT_UINT32, BASE_DEC,
|
|
NULL, 0x00, "The total length of the reassembled payload", HFILL }}
|
|
|
|
};
|
|
static gint *ett[] = {
|
|
&ett_lapdm,
|
|
&ett_lapdm_address,
|
|
&ett_lapdm_control,
|
|
&ett_lapdm_length,
|
|
&ett_lapdm_fragment,
|
|
&ett_lapdm_fragments
|
|
};
|
|
|
|
module_t *lapdm_module;
|
|
|
|
proto_lapdm = proto_register_protocol("Link Access Procedure, Channel Dm (LAPDm)", "LAPDm", "lapdm");
|
|
proto_register_field_array (proto_lapdm, hf, array_length(hf));
|
|
proto_register_subtree_array(ett, array_length(ett));
|
|
|
|
register_dissector("lapdm", dissect_lapdm, proto_lapdm);
|
|
|
|
lapdm_sapi_dissector_table = register_dissector_table("lapdm.sapi", "LAPDm SAPI", proto_lapdm, FT_UINT8, BASE_DEC);
|
|
|
|
lapdm_module = prefs_register_protocol(proto_lapdm, NULL);
|
|
prefs_register_bool_preference(lapdm_module, "reassemble",
|
|
"Reassemble fragmented LAPDm packets",
|
|
"Whether the dissector should defragment LAPDm messages spanning multiple packets.",
|
|
&reassemble_lapdm);
|
|
|
|
lapdm_last_n_s_map = wmem_map_new_autoreset(wmem_epan_scope(), wmem_file_scope(), g_direct_hash, g_direct_equal);
|
|
|
|
reassembly_table_register(&lapdm_reassembly_table,
|
|
&addresses_reassembly_table_functions);
|
|
|
|
/* B4 frames have no length octet at L2 level, but instead a L2 pseudo length octet
|
|
* at L3. We must call the proper dissector for decoding them, and gsm_a_ccch supports
|
|
* L2 pseudo length */
|
|
b4_info_handle = find_dissector_add_dependency("gsm_a_ccch", proto_lapdm);
|
|
}
|
|
|
|
/*
|
|
* Editor modelines - http://www.wireshark.org/tools/modelines.html
|
|
*
|
|
* Local variables:
|
|
* c-basic-offset: 4
|
|
* tab-width: 8
|
|
* indent-tabs-mode: nil
|
|
* End:
|
|
*
|
|
* vi: set shiftwidth=4 tabstop=8 expandtab:
|
|
* :indentSize=4:tabSize=8:noTabs=true:
|
|
*/
|