osmith
/
wireshark
forked from osmocom/wireshark
1
0
Fork 0
Code Pull Requests Releases Wiki Activity
wireshark/ui/qt
History
Jirka Novak 37f3c65ca5 rtp_analysis_dialog.cpp: save any supported codec as .au 
Change improves Wireshark ability to save rtp streams. It allows a user
to save any supported codec with 8 kHz rate. In real, it means G.711 and
G.729 for now.
There is no hardcoded codec limitation during save anymore. If code detects
unsupported codec or rate during save, it replaces samples with silence and
reports it. Therefore any added codec in future will be supported.

Note to RTP saving:
RTP streams (there can be up to two of them for save) can contain multiple
codecs in each direction - some of it can be supported and some
unsupported. What should be exported then?
Till my patch save do not run and a user received nothing even part of stream
was OK/encoded with supported codec.
Therefore I managed the code to start with export and do its best.
Unknown codec/part is replaced with silence and user is warned after
export. Therefore a user will get:
a) audio - when all codecs are supported (no warning)
b) mix audio/silence - when some codecs are supported (warning)
c) only silence - when no codec is supported (warning)

BTW same output user sees/gets in RTP player for years.

Change-Id: Id938d419f5841af46d2d2d3ddfaf1ec9a0235bcc
Reviewed-on: https://code.wireshark.org/review/35105
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
 		2019-11-21 16:06:49 +00:00
..
manager Qt: Cleanup space inside parentheses 2019-11-17 20:43:10 +00:00
models Qt: Speed up selection handling 2019-11-20 16:21:51 +00:00
utils Qt: Update ColorUtils::themeLinkBrush. 2019-11-18 21:23:51 +00:00
widgets Qt: Remove frameSelect signal 2019-11-21 10:59:05 +00:00
CMakeLists.txt Qt: Implement FilterListModel 2019-10-28 15:08:06 +00:00
CMakeListsCustom.txt.example spdx: more licenses converted. 2018-03-07 15:56:44 +00:00
about_dialog.cpp Qt: Remove an unneeded connection. 2019-11-18 21:23:08 +00:00
about_dialog.h About Dialog: Add a copy to clipboard button for the version info 2019-11-16 23:20:43 +00:00
about_dialog.ui About Dialog: Add a copy to clipboard button for the version info 2019-11-16 23:20:43 +00:00
accordion_frame.cpp Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
accordion_frame.h Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
address_editor_frame.cpp Qt: Cleanup push/pop Infos 2019-11-12 22:03:23 +00:00
address_editor_frame.h Qt: Cleanup push/pop Infos 2019-11-12 22:03:23 +00:00
address_editor_frame.ui
…
bluetooth_att_server_attributes_dialog.cpp Qt: Fix 5.13 deprecated warnings 2019-06-28 17:16:09 +00:00
bluetooth_att_server_attributes_dialog.h Add a "failed" return for tap packet routines. 2019-01-01 05:03:42 +00:00
bluetooth_att_server_attributes_dialog.ui Qt, docs, ieee1905: fix some spelling errors 2019-09-21 08:33:58 +00:00
bluetooth_device_dialog.cpp Qt: Fix 5.13 deprecated warnings 2019-06-28 17:16:09 +00:00
bluetooth_device_dialog.h Add a "failed" return for tap packet routines. 2019-01-01 05:03:42 +00:00
bluetooth_device_dialog.ui Qt, docs, ieee1905: fix some spelling errors 2019-09-21 08:33:58 +00:00
bluetooth_devices_dialog.cpp Qt: Fix 5.13 deprecated warnings 2019-06-28 17:16:09 +00:00
bluetooth_devices_dialog.h Add a "failed" return for tap packet routines. 2019-01-01 05:03:42 +00:00
bluetooth_devices_dialog.ui Qt, docs, ieee1905: fix some spelling errors 2019-09-21 08:33:58 +00:00
bluetooth_hci_summary_dialog.cpp Qt: Fix 5.13 deprecated warnings 2019-06-28 17:16:09 +00:00
bluetooth_hci_summary_dialog.h Add a "failed" return for tap packet routines. 2019-01-01 05:03:42 +00:00
bluetooth_hci_summary_dialog.ui
…
byte_view_tab.cpp Qt: Remove frameSelect signal 2019-11-21 10:59:05 +00:00
byte_view_tab.h Qt: Remove frameSelect signal 2019-11-21 10:59:05 +00:00
capture_event.h Qt: expose CaptureEvent definition for MOC 2018-04-18 12:06:21 +00:00
capture_file.cpp Qt: Remove some extraneous qDebug()s. 2019-11-04 17:46:48 +00:00
capture_file.h Use the file *base* name for statistics graphs etc.. 2018-07-06 00:31:45 +00:00
capture_file_dialog.cpp Qt: Cleanup space inside parentheses 2019-11-17 20:43:10 +00:00
capture_file_dialog.h Qt: Multiselection in PacketList 2019-11-17 12:20:29 +00:00
capture_file_properties_dialog.cpp Fix memory ownership when using cf_get_packet_comment 2019-01-25 04:53:01 +00:00
capture_file_properties_dialog.h Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
capture_file_properties_dialog.ui qt: capture file properties: add a splitter 2018-04-11 02:16:34 +00:00
capture_filter_syntax_worker.cpp CMake: Remove wsutil pcap dependency 2019-05-03 21:57:05 +00:00
capture_filter_syntax_worker.h Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
capture_info_dialog.cpp Give more complete path name of the header file in question. 2019-09-15 20:55:53 +00:00
capture_info_dialog.h Qt: Make sure we destroy the Capture Information dialog. 2018-05-18 04:16:43 +00:00
capture_info_dialog.ui Qt: Save the Capture Information dialog geometry. 2018-05-16 18:44:59 +00:00
capture_interfaces_dialog.cpp Qt: Cleanup space inside parentheses 2019-11-17 20:43:10 +00:00
capture_interfaces_dialog.h Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
capture_interfaces_dialog.ui Clean up the new-file selection criteria in the GUI. 2019-03-23 13:27:31 +00:00
capture_preferences_frame.cpp Qt: Fix no interface load preference handling 2019-05-15 21:47:06 +00:00
capture_preferences_frame.h prefs: add the option not to load interfaces on startup. 2018-09-26 17:11:47 +00:00
capture_preferences_frame.ui prefs: Remove trailing dot from UI text 2018-09-26 18:22:53 +00:00
coloring_rules_dialog.cpp Qt: Cleanup space inside parentheses 2019-11-17 20:43:10 +00:00
coloring_rules_dialog.h Qt: Do not spin unnecessary additional event loops 2019-10-01 03:53:46 +00:00
coloring_rules_dialog.ui Qt: Convert the rest of the preference dialog list buttons. 2019-06-21 23:51:49 +00:00
column_editor_frame.cpp Qt: Cleanup push/pop Infos 2019-11-12 22:03:23 +00:00
column_editor_frame.h Qt: Cleanup push/pop Infos 2019-11-12 22:03:23 +00:00
column_editor_frame.ui Qt: Improve ColumnEditorFrame stretching 2017-12-20 19:40:40 +00:00
column_preferences_frame.cpp Qt: Cleanup space inside parentheses 2019-11-17 20:43:10 +00:00
column_preferences_frame.h Qt: Move reset to contextmenu 2019-10-22 11:50:20 +00:00
column_preferences_frame.ui Qt: Move reset to contextmenu 2019-10-22 11:50:20 +00:00
compiled_filter_output.cpp HTTPS (almost) everywhere. 2019-07-26 18:44:40 +00:00
compiled_filter_output.h HTTPS (almost) everywhere. 2019-07-26 18:44:40 +00:00
compiled_filter_output.ui
…
conversation_colorize_action.cpp epan: Rename dissector_filters.c to conversation_filter.c 2019-11-04 10:17:16 +00:00
conversation_colorize_action.h Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
conversation_dialog.cpp Qt: Fix Follow Stream regression in Conversations dialog 2019-09-30 05:45:07 +00:00
conversation_dialog.h Qt: Fix Follow Stream regression in Conversations dialog 2019-09-30 05:45:07 +00:00
conversation_hash_tables_dialog.cpp WSUG: Fixup the "Internals" section. 2018-08-21 22:57:12 +00:00
conversation_hash_tables_dialog.h Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
conversation_hash_tables_dialog.ui
…
credentials_dialog.cpp Qt: call retap for credentials. 2019-07-04 13:19:23 +00:00
credentials_dialog.h Qt: Credentials move tap to dialog 2019-07-03 21:12:25 +00:00
credentials_dialog.ui tap: add credentials tap. 2019-06-26 07:09:54 +00:00
decode_as_dialog.cpp Qt: Convert the rest of the preference dialog list buttons. 2019-06-21 23:51:49 +00:00
decode_as_dialog.h Qt: Add clear all button to Decode As 2018-10-08 07:12:34 +00:00
decode_as_dialog.ui Qt: Convert the rest of the preference dialog list buttons. 2019-06-21 23:51:49 +00:00
display_filter_expression_dialog.cpp Qt: Fix loading of FilterExpression Dialog 2019-11-07 18:30:21 +00:00
display_filter_expression_dialog.h Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
display_filter_expression_dialog.ui
…
dissector_tables_dialog.cpp replace SPDX identifier GPL-2.0+ with GPL-2.0-or-later. 2018-02-08 14:57:36 +00:00
dissector_tables_dialog.h replace SPDX identifier GPL-2.0+ with GPL-2.0-or-later. 2018-02-08 14:57:36 +00:00
dissector_tables_dialog.ui Qt: Filter Dissector tables properly 2017-12-20 19:42:11 +00:00
enabled_protocols_dialog.cpp Qt: Cleanup space inside parentheses 2019-11-17 20:43:10 +00:00
enabled_protocols_dialog.h Qt: in EnabledProtocolsDialog handle protocol type 2019-09-04 06:45:00 +00:00
enabled_protocols_dialog.ui Qt: in EnabledProtocolsDialog handle protocol type 2019-09-04 06:45:00 +00:00
endpoint_dialog.cpp Don't remove constness in a cast if it's not necessary. 2019-03-17 21:19:24 +00:00
endpoint_dialog.h Re-implement "Map" feature for Endpoints 2019-02-16 21:11:12 +00:00
expert_info_dialog.cpp Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
expert_info_dialog.h Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
expert_info_dialog.ui Add a model to use for Expert Info dialog. 2017-12-13 16:07:07 +00:00
export_dissection_dialog.cpp Qt: Multiselection in PacketList 2019-11-17 12:20:29 +00:00
export_dissection_dialog.h Qt: Multiselection in PacketList 2019-11-17 12:20:29 +00:00
export_object_action.cpp Qt: Cleanup space inside parentheses 2019-11-17 20:43:10 +00:00
export_object_action.h Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
export_object_dialog.cpp No need to report "some files could not be saved". 2019-01-01 23:12:17 +00:00
export_object_dialog.h Qt: Fix memory leak for CaptureEvent 2018-04-17 13:16:46 +00:00
export_object_dialog.ui QT: Enable filtering entries in 'Export Objects' 2018-10-29 02:13:08 +00:00
export_pdu_dialog.cpp Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
export_pdu_dialog.h Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
export_pdu_dialog.ui
…
extcap_argument.cpp Qt: Cleanup space inside parentheses 2019-11-17 20:43:10 +00:00
extcap_argument.h Qt: Cleanup space inside parentheses 2019-11-17 20:43:10 +00:00
extcap_argument_file.cpp Qt: Cleanup space inside parentheses 2019-11-17 20:43:10 +00:00
extcap_argument_file.h Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
extcap_argument_multiselect.cpp Qt: Cleanup space inside parentheses 2019-11-17 20:43:10 +00:00
extcap_argument_multiselect.h Qt: Display checkboxes for extcap multicheck 2019-04-13 20:56:39 +00:00
extcap_options_dialog.cpp Qt: Cleanup space inside parentheses 2019-11-17 20:43:10 +00:00
extcap_options_dialog.h Qt: Omit calls without values on selector reload 2019-04-26 03:48:39 +00:00
extcap_options_dialog.ui Correct typo in Extcap-Options-Dialog 2019-08-03 10:50:36 +00:00
file_set_dialog.cpp Qt: Cleanup space inside parentheses 2019-11-17 20:43:10 +00:00
file_set_dialog.h replace SPDX identifier GPL-2.0+ with GPL-2.0-or-later. 2018-02-08 14:57:36 +00:00
file_set_dialog.ui Convert the file set dialog treewidget to a treeview+model. 2017-12-05 18:27:23 +00:00
filter_action.cpp Qt: Cleanup space inside parentheses 2019-11-17 20:43:10 +00:00
filter_action.h Qt: Extend filterbutton context menu 2019-08-29 11:44:16 +00:00
filter_dialog.cpp Qt: Cleanup space inside parentheses 2019-11-17 20:43:10 +00:00
filter_dialog.h Qt: Ensure only valid input for DisplayFilter 2019-11-06 19:19:40 +00:00
filter_dialog.ui Qt: Allow drag/drop of filter buttons in dialog 2019-10-29 19:44:15 +00:00
filter_expression_frame.cpp Qt: Cleanup space inside parentheses 2019-11-17 20:43:10 +00:00
filter_expression_frame.h Qt: Cleanup push/pop Infos 2019-11-12 22:03:23 +00:00
filter_expression_frame.ui Qt: Fix FilterExpressionFrame layout 2017-09-19 06:41:37 +00:00
firewall_rules_dialog.cpp Windows: Make sure more native dialogs handle HiDPI. 2018-05-16 04:22:20 +00:00
firewall_rules_dialog.h Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
firewall_rules_dialog.ui
…
follow_stream_dialog.cpp Qt: Cleanup space inside parentheses 2019-11-17 20:43:10 +00:00
follow_stream_dialog.h Qt, http2: Add Follow HTTP/2 Stream functionality 2019-09-22 05:29:30 +00:00
follow_stream_dialog.ui Qt, http2: Add Follow HTTP/2 Stream functionality 2019-09-22 05:29:30 +00:00
font_color_preferences_frame.cpp Qt: Do not spin unnecessary additional event loops 2019-10-01 03:53:46 +00:00
font_color_preferences_frame.h Qt: Do not spin unnecessary additional event loops 2019-10-01 03:53:46 +00:00
font_color_preferences_frame.ui Qt: Selected item preference updates. 2019-06-12 17:10:35 +00:00
funnel_statistics.cpp Qt: Move Signal/Slots to DisplayFilterEdit 2019-11-07 13:15:39 +00:00
funnel_statistics.h Qt: Move Signal/Slots to DisplayFilterEdit 2019-11-07 13:15:39 +00:00
funnel_string_dialog.cpp funnel: Free callback data 2019-11-05 15:21:30 +00:00
funnel_string_dialog.h funnel: Free callback data 2019-11-05 15:21:30 +00:00
funnel_string_dialog.ui
…
funnel_text_dialog.cpp funnel: Free callback data 2019-11-05 15:21:30 +00:00
funnel_text_dialog.h Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
funnel_text_dialog.ui
…
geometry_state_dialog.cpp Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
geometry_state_dialog.h Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
gpl-template.txt Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
gsm_map_summary_dialog.cpp Add a "failed" return for tap packet routines. 2019-01-01 05:03:42 +00:00
gsm_map_summary_dialog.h Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
gsm_map_summary_dialog.ui
…
i18n.qrc.in
…
iax2_analysis_dialog.cpp Update to qcustomplot 2.0.1 2019-09-17 08:34:46 +00:00
iax2_analysis_dialog.h Add a "failed" return for tap packet routines. 2019-01-01 05:03:42 +00:00
iax2_analysis_dialog.ui
…
import_text_dialog.cpp Qt: Cleanup space inside parentheses 2019-11-17 20:43:10 +00:00
import_text_dialog.h import: add export_pdu dummy header feature. 2018-10-31 13:17:10 +00:00
import_text_dialog.ui Qt, docs, ieee1905: fix some spelling errors 2019-09-21 08:33:58 +00:00
interface_frame.cpp Qt: Cleanup space inside parentheses 2019-11-17 20:43:10 +00:00
interface_frame.h macOS: Make Wireshark.app drag-installable. 2019-09-25 16:26:31 +00:00
interface_frame.ui macOS: Make Wireshark.app drag-installable. 2019-09-25 16:26:31 +00:00
interface_toolbar.cpp Qt: Do not leak C run-time handles on Windows 2019-05-21 15:09:47 +00:00
interface_toolbar.h Qt: Convert more "pressed" signals to "clicked". 2018-12-19 20:59:00 +00:00
interface_toolbar.ui
…
interface_toolbar_reader.cpp Eliminate some unneeded header checks. 2018-05-16 22:03:09 +00:00
interface_toolbar_reader.h Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
io_graph_dialog.cpp Qt: Cleanup space inside parentheses 2019-11-17 20:43:10 +00:00
io_graph_dialog.h Qt: IOGraph display filter graph added 2019-11-05 15:50:50 +00:00
io_graph_dialog.ui Qt: Convert the rest of the preference dialog list buttons. 2019-06-21 23:51:49 +00:00
layout_preferences_frame.cpp replace SPDX identifier GPL-2.0+ with GPL-2.0-or-later. 2018-02-08 14:57:36 +00:00
layout_preferences_frame.h Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
layout_preferences_frame.ui Qt: Small layout improvement in preferences 2017-11-28 21:09:58 +00:00
lbm_lbtrm_transport_dialog.cpp HTTPS (almost) everywhere. 2019-07-26 18:44:40 +00:00
lbm_lbtrm_transport_dialog.h HTTPS (almost) everywhere. 2019-07-26 18:44:40 +00:00
lbm_lbtrm_transport_dialog.ui Qt: Miscellaneous translation hints. 2017-12-29 14:15:21 +00:00
lbm_lbtru_transport_dialog.cpp HTTPS (almost) everywhere. 2019-07-26 18:44:40 +00:00
lbm_lbtru_transport_dialog.h HTTPS (almost) everywhere. 2019-07-26 18:44:40 +00:00
lbm_lbtru_transport_dialog.ui Qt: Miscellaneous translation hints. 2017-12-29 14:15:21 +00:00
lbm_stream_dialog.cpp HTTPS (almost) everywhere. 2019-07-26 18:44:40 +00:00
lbm_stream_dialog.h HTTPS (almost) everywhere. 2019-07-26 18:44:40 +00:00
lbm_stream_dialog.ui
…
lte_mac_statistics_dialog.cpp Add a "failed" return for tap packet routines. 2019-01-01 05:03:42 +00:00
lte_mac_statistics_dialog.h Add a "failed" return for tap packet routines. 2019-01-01 05:03:42 +00:00
lte_rlc_graph_dialog.cpp Qt: Cleanup space inside parentheses 2019-11-17 20:43:10 +00:00
lte_rlc_graph_dialog.h Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
lte_rlc_graph_dialog.ui Allow switching direction in LTE RLC graph 2017-12-09 13:58:19 +00:00
lte_rlc_statistics_dialog.cpp Add a "failed" return for tap packet routines. 2019-01-01 05:03:42 +00:00
lte_rlc_statistics_dialog.h Add a "failed" return for tap packet routines. 2019-01-01 05:03:42 +00:00
main.cpp Qt: Cleanup space inside parentheses 2019-11-17 20:43:10 +00:00
main_status_bar.cpp Qt: Remove frameSelect signal 2019-11-21 10:59:05 +00:00
main_status_bar.h Qt: Remove frameSelect signal 2019-11-21 10:59:05 +00:00
main_window.cpp Qt: Remove frameSelect signal 2019-11-21 10:59:05 +00:00
main_window.h Qt: Remove frameSelect signal 2019-11-21 10:59:05 +00:00
main_window.ui Remove "..." from end of Edit > Copy > As XXX menu items. 2019-11-20 04:25:59 +00:00
main_window_layout.cpp Qt: Cleanup space inside parentheses 2019-11-17 20:43:10 +00:00
main_window_preferences_frame.cpp Add ability to disable autocomplete suggestions for filter controls. 2018-10-22 04:45:59 +00:00
main_window_preferences_frame.h Add ability to disable autocomplete suggestions for filter controls. 2018-10-22 04:45:59 +00:00
main_window_preferences_frame.ui Add ability to disable autocomplete suggestions for filter controls. 2018-10-22 04:45:59 +00:00
main_window_slots.cpp Qt: Fix nullpointer access 2019-11-21 12:05:56 +00:00
manage_interfaces_dialog.cpp Qt: Cleanup space inside parentheses 2019-11-17 20:43:10 +00:00
manage_interfaces_dialog.h Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
manage_interfaces_dialog.ui Qt: Convert the rest of the preference dialog list buttons. 2019-06-21 23:51:49 +00:00
module_preferences_scroll_area.cpp Qt: Do not spin unnecessary additional event loops 2019-10-01 03:53:46 +00:00
module_preferences_scroll_area.h Qt: Open our preference dialogs via "clicked" signals. 2018-12-19 18:13:35 +00:00
module_preferences_scroll_area.ui
…
mtp3_summary_dialog.cpp Add a "failed" return for tap packet routines. 2019-01-01 05:03:42 +00:00
mtp3_summary_dialog.h Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
mtp3_summary_dialog.ui
…
multicast_statistics_dialog.cpp Qt: Add macro for g_list_next for C++ 2019-08-30 13:37:25 +00:00
multicast_statistics_dialog.h Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
packet_comment_dialog.cpp Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
packet_comment_dialog.h Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
packet_comment_dialog.ui
…
packet_dialog.cpp Qt: Remove frameSelect signal 2019-11-21 10:59:05 +00:00
packet_dialog.h Qt: Add a Contextmenu for the PacketDialog 2019-07-28 22:25:38 +00:00
packet_dialog.ui
…
packet_format_group_box.cpp Change the print preview if "include column headings" changes. 2018-07-06 00:11:41 +00:00
packet_format_group_box.h Change the print preview if "include column headings" changes. 2018-07-06 00:11:41 +00:00
packet_format_group_box.ui Add a "Include column headings" checkbox in export dissections and print. 2018-07-05 23:49:47 +00:00
packet_list.cpp Qt: Remove frameSelect signal 2019-11-21 10:59:05 +00:00
packet_list.h Qt: Remove frameSelect signal 2019-11-21 10:59:05 +00:00
packet_range_group_box.cpp Qt: Cleanup space inside parentheses 2019-11-17 20:43:10 +00:00
packet_range_group_box.h Qt: Multiselection in PacketList 2019-11-17 12:20:29 +00:00
packet_range_group_box.ui
…
preference_editor_frame.cpp Qt: Cleanup push/pop Infos 2019-11-12 22:03:23 +00:00
preference_editor_frame.h Qt: Cleanup push/pop Infos 2019-11-12 22:03:23 +00:00
preference_editor_frame.ui
…
preferences_dialog.cpp Qt: Cleanup space inside parentheses 2019-11-17 20:43:10 +00:00
preferences_dialog.h replace SPDX identifier GPL-2.0+ with GPL-2.0-or-later. 2018-02-08 14:57:36 +00:00
preferences_dialog.ui Qt: add initial RSA Keys preference frame 2019-01-29 23:34:01 +00:00
print_dialog.cpp Qt: Multiselection in PacketList 2019-11-17 12:20:29 +00:00
print_dialog.h Qt: Multiselection in PacketList 2019-11-17 12:20:29 +00:00
print_dialog.ui
…
profile_dialog.cpp Qt: Cleanup space inside parentheses 2019-11-17 20:43:10 +00:00
profile_dialog.h Qt: Update UI for profiles and handle export/import properly 2019-08-02 21:38:02 +00:00
profile_dialog.ui Qt, docs, ieee1905: fix some spelling errors 2019-09-21 08:33:58 +00:00
progress_frame.cpp file: remove use of g_get_current_time 2019-07-17 06:25:28 +00:00
progress_frame.h Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
progress_frame.ui
…
proto_tree.cpp Qt: Further cleanup goToPacket 2019-11-21 15:28:23 +00:00
proto_tree.h Qt: Remove frameSelect signal 2019-11-21 10:59:05 +00:00
protocol_hierarchy_dialog.cpp Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
protocol_hierarchy_dialog.h Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
protocol_hierarchy_dialog.ui
…
protocol_preferences_menu.cpp Qt: Connect destroyed() signal to flushAppSignals() 2019-10-21 17:34:00 +00:00
protocol_preferences_menu.h replace SPDX identifier GPL-2.0+ with GPL-2.0-or-later. 2018-02-08 14:57:36 +00:00
recent_file_status.cpp replace SPDX identifier GPL-2.0+ with GPL-2.0-or-later. 2018-02-08 14:57:36 +00:00
recent_file_status.h replace SPDX identifier GPL-2.0+ with GPL-2.0-or-later. 2018-02-08 14:57:36 +00:00
remote_capture_dialog.cpp Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
remote_capture_dialog.h Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
remote_capture_dialog.ui
…
remote_settings_dialog.cpp Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
remote_settings_dialog.h Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
remote_settings_dialog.ui
…
resolved_addresses_dialog.cpp Qt: Cleanup space inside parentheses 2019-11-17 20:43:10 +00:00
resolved_addresses_dialog.h Qt: Reduce use of CaptureFile 2019-10-07 21:00:31 +00:00
resolved_addresses_dialog.ui Qt: Rework Resolved Addresses dialog 2019-09-01 09:02:51 +00:00
response_time_delay_dialog.cpp Get rid of some GTK+-only stuff. 2018-05-12 23:01:14 +00:00
response_time_delay_dialog.h Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
rpc_service_response_time_dialog.cpp Qt: Cleanup space inside parentheses 2019-11-17 20:43:10 +00:00
rpc_service_response_time_dialog.h Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
rsa_keys_frame.cpp Fix build without GnuTLS 2019-01-31 13:14:22 +00:00
rsa_keys_frame.h Fix build without GnuTLS 2019-01-31 13:14:22 +00:00
rsa_keys_frame.ui Qt: Add support for RSA private key file selection 2019-01-29 23:34:14 +00:00
rtp_analysis_dialog.cpp rtp_analysis_dialog.cpp: save any supported codec as .au 2019-11-21 16:06:49 +00:00
rtp_analysis_dialog.h rtp_analysis_dialog.cpp: save any supported codec as .au 2019-11-21 16:06:49 +00:00
rtp_analysis_dialog.ui
…
rtp_audio_stream.cpp RTP: rtp_audio_stream.cpp: fixed excess silence in visualisation on waveform 2019-11-05 11:50:09 +00:00
rtp_audio_stream.h RTP: Common functions for allocation/deallocation of rtpstream_info_t 2018-06-25 14:16:26 +00:00
rtp_player_dialog.cpp RTP: rtp_audio_stream.cpp: fixed excess silence in visualisation on waveform 2019-11-05 11:50:09 +00:00
rtp_player_dialog.h Qt: Do not use exec() in RTP dialogs 2019-10-02 20:26:43 +00:00
rtp_player_dialog.ui Qt UI: remove empty jitter buffer label tooltip 2019-09-08 06:12:29 +00:00
rtp_stream_dialog.cpp Qt: Add macro for g_list_next for C++ 2019-08-30 13:37:25 +00:00
rtp_stream_dialog.h Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
rtp_stream_dialog.ui
…
scsi_service_response_time_dialog.cpp Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
scsi_service_response_time_dialog.h Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
sctp_all_assocs_dialog.cpp Qt: Add macro for g_list_next for C++ 2019-08-30 13:37:25 +00:00
sctp_all_assocs_dialog.h No need for a per-instance private sctp_allassocs_info_t pointer. 2019-03-17 22:04:00 +00:00
sctp_all_assocs_dialog.ui
…
sctp_assoc_analyse_dialog.cpp Qt: Add macro for g_list_next for C++ 2019-08-30 13:37:25 +00:00
sctp_assoc_analyse_dialog.h Qt: fix several crashes in the SCTP Dialogs 2018-08-20 05:01:11 +00:00
sctp_assoc_analyse_dialog.ui Qt: Move sized toolbar images to stock_icons. 2018-01-05 03:27:15 +00:00
sctp_chunk_statistics_dialog.cpp Qt: Cleanup space inside parentheses 2019-11-17 20:43:10 +00:00
sctp_chunk_statistics_dialog.h Qt: fix several crashes in the SCTP Dialogs 2018-08-20 05:01:11 +00:00
sctp_chunk_statistics_dialog.ui
…
sctp_graph_arwnd_dialog.cpp Qt: Add macro for g_list_next for C++ 2019-08-30 13:37:25 +00:00
sctp_graph_arwnd_dialog.h Qt: fix several crashes in the SCTP Dialogs 2018-08-20 05:01:11 +00:00
sctp_graph_arwnd_dialog.ui
…
sctp_graph_byte_dialog.cpp Qt: Add macro for g_list_next for C++ 2019-08-30 13:37:25 +00:00
sctp_graph_byte_dialog.h Qt: fix several crashes in the SCTP Dialogs 2018-08-20 05:01:11 +00:00
sctp_graph_byte_dialog.ui
…
sctp_graph_dialog.cpp Qt: Cleanup space inside parentheses 2019-11-17 20:43:10 +00:00
sctp_graph_dialog.h Qt: fix several crashes in the SCTP Dialogs 2018-08-20 05:01:11 +00:00
sctp_graph_dialog.ui SCTP: Add a checkbox to show relative TSNs 2018-06-08 10:23:34 +00:00
search_frame.cpp Qt: Cleanup push/pop Infos 2019-11-12 22:03:23 +00:00
search_frame.h Qt: Cleanup push/pop Infos 2019-11-12 22:03:23 +00:00
search_frame.ui
…
sequence_diagram.cpp Update to qcustomplot 2.0.1 2019-09-17 08:34:46 +00:00
sequence_diagram.h Qt: Fix issues found by clang. 2019-09-17 19:23:56 +00:00
sequence_dialog.cpp Qt: Fix dangling delete for sequence diagramm 2019-11-17 23:32:45 +00:00
sequence_dialog.h Qt: Sequence Dialog simplify context menu 2019-08-05 12:33:04 +00:00
sequence_dialog.ui Qt: Sequence Dialog simplify context menu 2019-08-05 12:33:04 +00:00
service_response_time_dialog.cpp Get rid of some GTK+-only stuff. 2018-05-13 19:46:45 +00:00
service_response_time_dialog.h Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
show_packet_bytes_dialog.cpp epan: Guard g_base64_decode_inplace() against zero length string 2018-09-05 17:19:42 +00:00
show_packet_bytes_dialog.h HTTPS (almost) everywhere. 2019-07-26 18:44:40 +00:00
show_packet_bytes_dialog.ui Qt: Enable select hint text in Show Packet Bytes 2018-08-23 12:18:09 +00:00
simple_dialog.cpp Qt: add missing include in simple_dialog. 2019-05-21 12:17:02 +00:00
simple_dialog.h Qt: Add asynchronous simple dialog 2019-05-20 12:53:38 +00:00
simple_statistics_dialog.cpp Get rid of some GTK+-only stuff. 2018-05-13 20:21:14 +00:00
simple_statistics_dialog.h Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
stats_tree_dialog.cpp Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
stats_tree_dialog.h Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
supported_protocols_dialog.cpp replace SPDX identifier GPL-2.0+ with GPL-2.0-or-later. 2018-02-08 14:57:36 +00:00
supported_protocols_dialog.h replace SPDX identifier GPL-2.0+ with GPL-2.0-or-later. 2018-02-08 14:57:36 +00:00
supported_protocols_dialog.ui Convert Supported Protocols dialog to use model 2017-12-16 15:20:50 +00:00
tabnav_tree_widget.cpp Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
tabnav_tree_widget.h Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
tap_parameter_dialog.cpp Use the display name in "Save As..." output for statistics taps. 2018-07-06 02:11:09 +00:00
tap_parameter_dialog.h Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
tap_parameter_dialog.ui
…
tcp_stream_dialog.cpp Qt: Cleanup space inside parentheses 2019-11-17 20:43:10 +00:00
tcp_stream_dialog.h Update to qcustomplot 2.0.1 2019-09-17 08:34:46 +00:00
tcp_stream_dialog.ui Qt, http2: Add Follow HTTP/2 Stream functionality 2019-09-22 05:29:30 +00:00
time_shift_dialog.cpp Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
time_shift_dialog.h Fix comment end after SPDX identifier 2018-05-01 06:56:37 +00:00
time_shift_dialog.ui
…
traffic_table_dialog.cpp Qt: Remove a duplicate variable. 2019-11-21 00:18:29 +00:00
traffic_table_dialog.h Qt: Remove a duplicate variable. 2019-11-21 00:18:29 +00:00
traffic_table_dialog.ui
…
uat_dialog.cpp Qt: Move CopyFrom from menu to button 2019-08-26 06:34:31 +00:00
uat_dialog.h Qt: Move CopyFrom from menu to button 2019-08-26 06:34:31 +00:00
uat_dialog.ui Qt: Convert the list management icons to templates. 2019-06-20 20:50:25 +00:00
uat_frame.cpp Qt: Move CopyFrom from menu to button 2019-08-26 06:34:31 +00:00
uat_frame.h Qt: Move CopyFrom from menu to button 2019-08-26 06:34:31 +00:00
uat_frame.ui Qt: Move CopyFrom from menu to button 2019-08-26 06:34:31 +00:00
voip_calls_dialog.cpp Qt: Cleanup space inside parentheses 2019-11-17 20:43:10 +00:00
voip_calls_dialog.h Qt: Rework VOIP Dialog context menu 2019-08-02 19:14:55 +00:00
voip_calls_dialog.ui Qt: Rework VOIP Dialog context menu 2019-08-02 19:14:55 +00:00
welcome_page.cpp Qt: Cleanup push/pop Infos 2019-11-12 22:03:23 +00:00
welcome_page.h Qt: Cleanup push/pop Infos 2019-11-12 22:03:23 +00:00
welcome_page.ui Qt: Welcome page dark mode fixes. 2019-03-22 05:20:07 +00:00
wireless_frame.cpp Qt: Cleanup push/pop Infos 2019-11-12 22:03:23 +00:00
wireless_frame.h Qt: Cleanup push/pop Infos 2019-11-12 22:03:23 +00:00
wireless_frame.ui
…
wireshark_application.cpp Qt: Further cleanup goToPacket 2019-11-21 15:28:23 +00:00
wireshark_application.h Qt: Further cleanup goToPacket 2019-11-21 15:28:23 +00:00
wireshark_de.ts [Automatic update for 2019-11-17] 2019-11-17 08:20:23 +00:00
wireshark_dialog.cpp Qt: Cleanup space inside parentheses 2019-11-17 20:43:10 +00:00
wireshark_dialog.h Qt: Simplify Wireshark Dialog class 2019-10-08 10:32:11 +00:00
wireshark_en.ts Qt: Multiselection in PacketList 2019-11-17 12:20:29 +00:00
wireshark_fr.ts [Automatic update for 2019-11-17] 2019-11-17 08:20:23 +00:00
wireshark_it.ts [Automatic update for 2019-11-17] 2019-11-17 08:20:23 +00:00
wireshark_ja_JP.ts [Automatic update for 2019-11-17] 2019-11-17 08:20:23 +00:00
wireshark_pl.ts [Automatic update for 2019-11-17] 2019-11-17 08:20:23 +00:00
wireshark_ru.ts [Automatic update for 2019-11-17] 2019-11-17 08:20:23 +00:00
wireshark_sv.ts [Automatic update for 2019-11-17] 2019-11-17 08:20:23 +00:00
wireshark_uk.ts [Automatic update for 2019-11-17] 2019-11-17 08:20:23 +00:00
wireshark_zh_CN.ts [Automatic update for 2019-11-17] 2019-11-17 08:20:23 +00:00
wlan_statistics_dialog.cpp Qt: Cleanup space inside parentheses 2019-11-17 20:43:10 +00:00
wlan_statistics_dialog.h Add a "failed" return for tap packet routines. 2019-01-01 05:03:42 +00:00