osmith/wireshark
1
0
Fork 0
forked from osmocom/wireshark
Code Pull requests Releases Wiki Activity
wireshark/epan/dissectors/packet-ipmi-pps.c
Anders Broman 46a26582ec From Alexey Neyman : 
(Note just checking in the new files not yet added to the build process on purpose
the changes to packet-ipmi.c is also not done yet - Anders).

Generic changes:

- IPMI session wrapper dissection has been separated from the dissection of
  IPMI itself. This will allow for possible dissection of captures directly
  from IPMB (as the IPMB messages lack the IPMI session wrapper).
IPMI changes:

- Implemented request-response matching for IPMI sessions. This makes easy
  serves two purposes: first, it allows for easy location of response to a
  certain request and vice versa. Second, it allows for dissection of
  responses where response format depends on the request data.

- IPMI dissector can now dissect much broader set of commands.

- Command-specific completion codes are now handled.

- The dissector is able to parse IPMI commands embedded into other IPMI
  commands (for now, only Send Message; Get Message and Forward Message
  can be implemented later). Such embedded commands also matched with
  responses to them.

svn path=/trunk/; revision=25948
2008-08-06 20:51:02 +00:00

105 lines
5.4 KiB
C
Raw Blame History

/* packet-ipmi-pps.c
* Sub-dissectors for IPMI messages (netFn=OEM/Group, defining body = PPS)
* Copyright 2007-2008, Alexey Neyman, Pigeon Point Systems <avn@pigeonpoint.com>
*
* $Id$
*
* Wireshark - Network traffic analyzer
* By Gerald Combs <gerald@wireshark.org>
* Copyright 1998 Gerald Combs
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#ifdef HAVE_SYS_TYPES_H
#include <sys/types.h>
#endif
#include <epan/packet.h>
#include "packet-ipmi.h"
static ipmi_cmd_t cmd_pps[] = {
{ 0x00, IPMI_TBD, NULL, NULL, "[PPS OEM] Get Status", 0 },
{ 0x01, IPMI_TBD, NULL, NULL, "[PPS OEM] Get Serial Interface Properties", 0 },
{ 0x02, IPMI_TBD, NULL, NULL, "[PPS OEM] Set Serial Interface Properties", 0 },
{ 0x03, IPMI_TBD, NULL, NULL, "[PPS OEM] Get Debug Level", 0 },
{ 0x04, IPMI_TBD, NULL, NULL, "[PPS OEM] Set Debug Level", 0 },
{ 0x05, IPMI_TBD, NULL, NULL, "[PPS OEM] Get Hardware Address", 0 },
{ 0x06, IPMI_TBD, NULL, NULL, "[PPS OEM] Set Hardware Address", 0 },
{ 0x07, IPMI_TBD, NULL, NULL, "[PPS OEM] Get Handle Switch", 0 },
{ 0x08, IPMI_TBD, NULL, NULL, "[PPS OEM] Set Handle Switch", 0 },
{ 0x09, IPMI_TBD, NULL, NULL, "[PPS OEM] Get Payload Communication Timeout", 0 },
{ 0x0a, IPMI_TBD, NULL, NULL, "[PPS OEM] Set Payload Communication Timeout", 0 },
{ 0x0b, IPMI_TBD, NULL, NULL, "[PPS OEM] Enable Payload Control", 0 },
{ 0x0c, IPMI_TBD, NULL, NULL, "[PPS OEM] Disable Payload Control", 0 },
{ 0x0d, IPMI_TBD, NULL, NULL, "[PPS OEM] Reset IPMC", 0 },
{ 0x0e, IPMI_TBD, NULL, NULL, "[PPS OEM] Hang IPMC", 0 },
{ 0x0f, IPMI_TBD, NULL, NULL, "[PPS OEM] Bused Resource Control", 0 },
{ 0x10, IPMI_TBD, NULL, NULL, "[PPS OEM] Bused Resource Status", 0 },
{ 0x11, IPMI_TBD, NULL, NULL, "[PPS OEM] Graceful Reset", 0 },
{ 0x12, IPMI_TBD, NULL, NULL, "[PPS OEM] Diagnostic Interrupt Results", 0 },
{ 0x13, IPMI_TBD, NULL, NULL, "[PPS OEM] Set/Clear Telco Alarm", 0 },
{ 0x14, IPMI_TBD, NULL, NULL, "[PPS OEM] Get Telco Alarm Sensor Number", 0 },
{ 0x15, IPMI_TBD, NULL, NULL, "[PPS OEM] Get Payload Shutdown Timeout", 0 },
{ 0x16, IPMI_TBD, NULL, NULL, "[PPS OEM] Set Payload Shutdown Timeout", 0 },
{ 0x17, IPMI_TBD, NULL, NULL, "[PPS OEM] Switch over Serial Debug", 0 },
{ 0x18, IPMI_TBD, NULL, NULL, "[PPS OEM] Set Local FRU LED State", 0 },
{ 0x19, IPMI_TBD, NULL, NULL, "[PPS OEM] Get Local FRU LED State", 0 },
{ 0x1a, IPMI_TBD, NULL, NULL, "[PPS OEM] Update Discrete Sensor", 0 },
{ 0x1b, IPMI_TBD, NULL, NULL, "[PPS OEM] Update Threshold Sensor", 0 },
{ 0x1c, IPMI_TBD, NULL, NULL, "[PPS OEM] BTI Script Prepare", 0 },
{ 0x1d, IPMI_TBD, NULL, NULL, "[PPS OEM] BTI Script Write", 0 },
{ 0x1e, IPMI_TBD, NULL, NULL, "[PPS OEM] BTI Script Complete", 0 },
{ 0x1f, IPMI_TBD, NULL, NULL, "[PPS OEM] BTI Script Start", 0 },
{ 0x20, IPMI_TBD, NULL, NULL, "[PPS OEM] BTI Script Stop", 0 },
{ 0x21, IPMI_TBD, NULL, NULL, "[PPS OEM] BTI Script Resume", 0 },
{ 0x22, IPMI_TBD, NULL, NULL, "[PPS OEM] BTI Script Cease", 0 },
{ 0x23, IPMI_TBD, NULL, NULL, "[PPS OEM] BTI Sensor Set", 0 },
{ 0x24, IPMI_TBD, NULL, NULL, "[PPS OEM] BTI Notify", 0 },
{ 0x25, IPMI_TBD, NULL, NULL, "[PPS OEM] BTI Get FRU State", 0 },
{ 0x26, IPMI_TBD, NULL, NULL, "[PPS OEM] BTI Invalidate Hardware Address", 0 },
{ 0x27, IPMI_TBD, NULL, NULL, "[PPS OEM] Get Module Status", 0 },
{ 0x28, IPMI_TBD, NULL, NULL, "[PPS OEM] Enable AMC Site", 0 },
{ 0x29, IPMI_TBD, NULL, NULL, "[PPS OEM] Disable AMC Site", 0 },
{ 0x2a, IPMI_TBD, NULL, NULL, "[PPS OEM] BTI Wait for Payload Notify", 0 },
{ 0x2b, IPMI_TBD, NULL, NULL, "[PPS OEM] Set Test Flags", 0 },
{ 0x2c, IPMI_TBD, NULL, NULL, "[PPS OEM] Get Geographic Address", 0 },
{ 0x2d, IPMI_TBD, NULL, NULL, "[PPS OEM] Set Geographic Address", 0 },
{ 0x30, IPMI_TBD, NULL, NULL, "[PPS OEM] Set EEPROM Sensor Data", 0 },
{ 0x31, IPMI_TBD, NULL, NULL, "[PPS OEM] Set EEPROM Sensor Hysteresis", 0 },
{ 0x32, IPMI_TBD, NULL, NULL, "[PPS OEM] Set EEPROM Sensor Threshold", 0 },
{ 0x33, IPMI_TBD, NULL, NULL, "[PPS OEM] Reset EEPROM SDR Repository", 0 },
{ 0x34, IPMI_TBD, NULL, NULL, "[PPS OEM] Backend Power Control", 0 },
{ 0x35, IPMI_TBD, NULL, NULL, "[PPS OEM] Read CPLD Register", 0 },
{ 0x36, IPMI_TBD, NULL, NULL, "[PPS OEM] Write CPLD Register", 0 }
};
void
ipmi_register_pps(gint proto_ipmi _U_)
{
static guint8 sig_pps[3] = { 0x0a, 0x40, 0x00 };
static guint8 sig_pps_rev[3] = { 0x00, 0x40, 0x0a };
ipmi_register_netfn_cmdtab(IPMI_OEM_REQ, IPMI_OEM_NONE, sig_pps, 3,
"Pigeon Point Systems", cmd_pps, array_length(cmd_pps));
ipmi_register_netfn_cmdtab(IPMI_OEM_REQ, IPMI_OEM_NONE, sig_pps_rev, 3,
"Pigeon Point Systems (reversed)", cmd_pps, array_length(cmd_pps));
}
View git blame Copy permalink