osmith
/
wireshark
forked from osmocom/wireshark
1
0
Fork 0
Code Pull Requests Releases Wiki Activity
wireshark/tools/macos-setup.sh

3578 lines
126 KiB
Bash
Executable File
Raw Permalink Blame History

#!/bin/bash
# Setup development environment on macOS (tested with 10.6.8 and Xcode
# 3.2.6 and with 10.12.4 and Xcode 8.3).
#
# Copyright 2011 Michael Tuexen, Joerg Mayer, Guy Harris (see AUTHORS file)
#
# Wireshark - Network traffic analyzer
# By Gerald Combs <gerald@wireshark.org>
# Copyright 1998 Gerald Combs
#
# SPDX-License-Identifier: GPL-2.0-or-later
shopt -s extglob
#
# Get the major version of Darwin, so we can check the major macOS
# version.
#
DARWIN_MAJOR_VERSION=`uname -r | sed 's/\([0-9]*\).*/\1/'`
#
# The minimum supported version of Qt is 5.9, so the minimum supported version
# of macOS is OS X 10.10 (Yosemite), aka Darwin 14.0
if [[ $DARWIN_MAJOR_VERSION -lt 14 ]]; then
echo "This script does not support any versions of macOS before Yosemite" 1>&2
exit 1
fi
#
# Get the processor architecture of Darwin. Currently supported: arm, i386
#
DARWIN_PROCESSOR_ARCH=`uname -p`
if [ "$DARWIN_PROCESSOR_ARCH" != "arm" -a "$DARWIN_PROCESSOR_ARCH" != "i386" ]; then
echo "This script does not support this processor architecture" 1>&2
exit 1
fi
#
# Versions of packages to download and install.
#
#
# We use curl, but older versions of curl in older macOS releases can't
# handle some sites - including the xz site.
#
# If the version of curl in the system is older than 7.54.0, download
# curl and install it.
#
current_curl_version=`curl --version | sed -n 's/curl \([0-9.]*\) .*/\1/p'`
current_curl_major_version="`expr $current_curl_version : '\([0-9][0-9]*\).*'`"
current_curl_minor_version="`expr $current_curl_version : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
if [[ $current_curl_major_version -lt 7 ||
($current_curl_major_version -eq 7 &&
$current_curl_minor_version -lt 54) ]]; then
CURL_VERSION=${CURL_VERSION-7.60.0}
fi
#
# Some packages need xz to unpack their current source.
# XXX: tar, since macOS 10.9, can uncompress xz'ed tarballs,
# so perhaps we could get rid of this now?
#
XZ_VERSION=5.2.5
#
# Some packages need lzip to unpack their current source.
#
LZIP_VERSION=1.21
#
# The version of libPCRE on Catalina is insufficient to build glib due to
# missing UTF-8 support.
#
PCRE_VERSION=8.45
#
# CMake is required to do the build - and to build some of the
# dependencies.
#
CMAKE_VERSION=${CMAKE_VERSION-3.21.4}
#
# Ninja isn't required, as make is provided with Xcode, but it is
# claimed to build faster than make.
# Comment it out if you don't want it.
#
NINJA_VERSION=${NINJA_VERSION-1.10.2}
#
# The following libraries and tools are required even to build only TShark.
#
GETTEXT_VERSION=0.21
GLIB_VERSION=2.68.4
if [ "$GLIB_VERSION" ]; then
GLIB_MAJOR_VERSION="`expr $GLIB_VERSION : '\([0-9][0-9]*\).*'`"
GLIB_MINOR_VERSION="`expr $GLIB_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
GLIB_DOTDOT_VERSION="`expr $GLIB_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
GLIB_MAJOR_MINOR_VERSION=$GLIB_MAJOR_VERSION.$GLIB_MINOR_VERSION
GLIB_MAJOR_MINOR_DOTDOT_VERSION=$GLIB_MAJOR_VERSION.$GLIB_MINOR_VERSION.$GLIB_DOTDOT_VERSION
fi
PKG_CONFIG_VERSION=0.29.2
#
# libgpg-error is required for libgcrypt.
#
LIBGPG_ERROR_VERSION=1.39
#
# libgcrypt is required.
#
LIBGCRYPT_VERSION=1.8.7
#
# libpcre2 is required.
#
PCRE2_VERSION=10.39
#
# One or more of the following libraries are required to build Wireshark.
#
# To override the version of Qt call the script with some of the variables
# set to the new values. Setting the variable to empty will disable building
# the toolkit and will uninstall # any version previously installed by the
# script, e.g.
# "QT_VERSION=5.10.1 ./macos-setup.sh"
# will build and install with QT 5.10.1.
#
QT_VERSION=${QT_VERSION-5.12.12}
if [ "$QT_VERSION" ]; then
QT_MAJOR_VERSION="`expr $QT_VERSION : '\([0-9][0-9]*\).*'`"
QT_MINOR_VERSION="`expr $QT_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
QT_DOTDOT_VERSION="`expr $QT_VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
QT_MAJOR_MINOR_VERSION=$QT_MAJOR_VERSION.$QT_MINOR_VERSION
QT_MAJOR_MINOR_DOTDOT_VERSION=$QT_MAJOR_VERSION.$QT_MINOR_VERSION.$QT_DOTDOT_VERSION
fi
#
# The following libraries are optional.
# Comment them out if you don't want them, but note that some of
# the optional libraries are required by other optional libraries.
#
LIBSMI_VERSION=0.4.8
GNUTLS_VERSION=3.6.15
if [ "$GNUTLS_VERSION" ]; then
#
# We'll be building GnuTLS, so we may need some additional libraries.
# We assume GnuTLS can work with Nettle; newer versions *only* use
# Nettle, not libgcrypt.
#
GNUTLS_MAJOR_VERSION="`expr $GNUTLS_VERSION : '\([0-9][0-9]*\).*'`"
GNUTLS_MINOR_VERSION="`expr $GNUTLS_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
NETTLE_VERSION=3.6
#
# And, in turn, Nettle requires GMP.
#
GMP_VERSION=6.2.1
#
# And p11-kit
P11KIT_VERSION=0.23.21
# Which requires libtasn1
LIBTASN1_VERSION=4.16.0
fi
# Use 5.2.4, not 5.3, for now; lua_bitop.c hasn't been ported to 5.3
# yet, and we need to check for compatibility issues (we'd want Lua
# scripts to work with 5.1, 5.2, and 5.3, as long as they only use Lua
# features present in all three versions)
LUA_VERSION=5.2.4
SNAPPY_VERSION=1.1.8
ZSTD_VERSION=1.4.2
LIBXML2_VERSION=2.9.9
LZ4_VERSION=1.9.2
SBC_VERSION=1.3
CARES_VERSION=1.15.0
LIBSSH_VERSION=0.9.6
# mmdbresolve
MAXMINDDB_VERSION=1.4.3
NGHTTP2_VERSION=1.46.0
SPANDSP_VERSION=0.0.6
SPEEXDSP_VERSION=1.2.0
if [ "$SPANDSP_VERSION" ]; then
#
# SpanDSP depends on libtiff.
#
LIBTIFF_VERSION=3.8.1
fi
BCG729_VERSION=1.0.2
ILBC_VERSION=2.0.2
OPUS_VERSION=1.3.1
#
# Is /usr/bin/python3 a working version of Python? It may be, as it
# might be a wrapper that runs the Python 3 that's part of Xcode.
#
if /usr/bin/python3 --version >/dev/null 2>&1
then
#
# Yes - don't bother installing Python 3 from elsewhere
#
:
else
#
# No - install a Python package.
#
PYTHON3_VERSION=3.9.5
fi
BROTLI_VERSION=1.0.9
# minizip
ZLIB_VERSION=1.2.11
# Uncomment to enable automatic updates using Sparkle
#SPARKLE_VERSION=2.1.0
#
# Asciidoctor is required to build the documentation.
#
ASCIIDOCTOR_VERSION=${ASCIIDOCTOR_VERSION-2.0.16}
ASCIIDOCTORPDF_VERSION=${ASCIIDOCTORPDF_VERSION-1.6.1}
#
# GNU autotools. They're not supplied with the macOS versions we
# support, and we currently use them for minizip.
#
AUTOCONF_VERSION=2.71
AUTOMAKE_VERSION=1.16.5
LIBTOOL_VERSION=2.4.6
install_curl() {
if [ "$CURL_VERSION" -a ! -f curl-$CURL_VERSION-done ] ; then
echo "Downloading, building, and installing curl:"
[ -f curl-$CURL_VERSION.tar.bz2 ] || curl -L -O https://curl.haxx.se/download/curl-$CURL_VERSION.tar.bz2 || exit 1
$no_build && echo "Skipping installation" && return
bzcat curl-$CURL_VERSION.tar.bz2 | tar xf - || exit 1
cd curl-$CURL_VERSION
./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch curl-$CURL_VERSION-done
fi
}
uninstall_curl() {
if [ ! -z "$installed_curl_version" ] ; then
echo "Uninstalling curl:"
cd curl-$installed_curl_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm curl-$installed_curl_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf curl-$installed_curl_version
rm -rf curl-$installed_curl_version.tar.bz2
fi
installed_curl_version=""
fi
}
install_xz() {
if [ "$XZ_VERSION" -a ! -f xz-$XZ_VERSION-done ] ; then
echo "Downloading, building, and installing xz:"
[ -f xz-$XZ_VERSION.tar.bz2 ] || curl -L -O https://tukaani.org/xz/xz-$XZ_VERSION.tar.bz2 || exit 1
$no_build && echo "Skipping installation" && return
bzcat xz-$XZ_VERSION.tar.bz2 | tar xf - || exit 1
cd xz-$XZ_VERSION
#
# This builds and installs liblzma, which libxml2 uses, and
# Wireshark uses liblzma, so we need to build this with
# all the minimum-deployment-version and SDK stuff.
#
CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch xz-$XZ_VERSION-done
fi
}
uninstall_xz() {
if [ ! -z "$installed_xz_version" ] ; then
echo "Uninstalling xz:"
cd xz-$installed_xz_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm xz-$installed_xz_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf xz-$installed_xz_version
rm -rf xz-$installed_xz_version.tar.bz2
fi
installed_xz_version=""
fi
}
install_lzip() {
if [ "$LZIP_VERSION" -a ! -f lzip-$LZIP_VERSION-done ] ; then
echo "Downloading, building, and installing lzip:"
[ -f lzip-$LZIP_VERSION.tar.gz ] || curl -L -O https://download.savannah.gnu.org/releases/lzip/lzip-$LZIP_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat lzip-$LZIP_VERSION.tar.gz | tar xf - || exit 1
cd lzip-$LZIP_VERSION
./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch lzip-$LZIP_VERSION-done
fi
}
uninstall_lzip() {
if [ ! -z "$installed_lzip_version" ] ; then
echo "Uninstalling lzip:"
cd lzip-$installed_lzip_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm lzip-$installed_lzip_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf lzip-$installed_lzip_version
rm -rf lzip-$installed_lzip_version.tar.gz
fi
installed_lzip_version=""
fi
}
install_pcre() {
if [ "$PCRE_VERSION" -a ! -f pcre-$PCRE_VERSION-done ] ; then
echo "Downloading, building, and installing pcre:"
[ -f pcre-$PCRE_VERSION.tar.bz2 ] || curl -L -O https://sourceforge.net/projects/pcre/files/pcre/$PCRE_VERSION/pcre-$PCRE_VERSION.tar.bz2 || exit 1
$no_build && echo "Skipping installation" && return
bzcat pcre-$PCRE_VERSION.tar.bz2 | tar xf - || exit 1
cd pcre-$PCRE_VERSION
./configure --enable-unicode-properties || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch pcre-$PCRE_VERSION-done
fi
}
uninstall_pcre() {
if [ ! -z "$installed_pcre_version" ] ; then
echo "Uninstalling pcre:"
cd pcre-$installed_pcre_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm pcre-$installed_pcre_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf pcre-$installed_pcre_version
rm -rf pcre-$installed_pcre_version.tar.bz2
fi
installed_pcre_version=""
fi
}
install_pcre2() {
if [ "$PCRE2_VERSION" -a ! -f "pcre2-$PCRE2_VERSION-done" ] ; then
echo "Downloading, building, and installing pcre2:"
[ -f "pcre2-$PCRE2_VERSION.tar.bz2" ] || curl -L -O "https://github.com/PhilipHazel/pcre2/releases/download/pcre2-$PCRE2_VERSION/pcre2-10.39.tar.bz2" || exit 1
$no_build && echo "Skipping installation" && return
bzcat "pcre2-$PCRE2_VERSION.tar.bz2" | tar xf - || exit 1
cd "pcre2-$PCRE2_VERSION"
mkdir build_dir
cd build_dir
# https://github.com/Homebrew/homebrew-core/blob/master/Formula/pcre2.rb
# https://github.com/microsoft/vcpkg/blob/master/ports/pcre2/portfile.cmake
MACOSX_DEPLOYMENT_TARGET=$min_osx_target SDKROOT="$SDKPATH" \
cmake -DBUILD_STATIC_LIBS=OFF -DBUILD_SHARED_LIBS=ON -DPCRE2_SUPPORT_JIT=ON -DPCRE2_SUPPORT_UNICODE=ON .. || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ../..
touch "pcre2-$PCRE2_VERSION-done"
fi
}
uninstall_pcre2() {
if [ -n "$installed_pcre2_version" ] && [ -s "pcre2-$installed_pcre2_version/build_dir/install_manifest.txt" ] ; then
echo "Uninstalling pcre2:"
# PCRE2 10.39 installs pcre2unicode.3 twice, so this will return an error.
while read -r ; do $DO_RM -v "$REPLY" ; done < <(cat "pcre2-$installed_pcre2_version/build_dir/install_manifest.txt"; echo)
rm "pcre2-$installed_pcre2_version-done"
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf "pcre2-$installed_pcre2_version"
rm -rf "pcre2-$installed_pcre2_version.tar.bz2"
fi
installed_pcre2_version=""
fi
}
install_autoconf() {
if [ "$AUTOCONF_VERSION" -a ! -f autoconf-$AUTOCONF_VERSION-done ] ; then
echo "Downloading, building and installing GNU autoconf..."
[ -f autoconf-$AUTOCONF_VERSION.tar.xz ] || curl -L -O ftp://ftp.gnu.org/gnu/autoconf/autoconf-$AUTOCONF_VERSION.tar.xz || exit 1
$no_build && echo "Skipping installation" && return
xzcat autoconf-$AUTOCONF_VERSION.tar.xz | tar xf - || exit 1
cd autoconf-$AUTOCONF_VERSION
./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch autoconf-$AUTOCONF_VERSION-done
fi
}
uninstall_autoconf() {
if [ ! -z "$installed_autoconf_version" ] ; then
#
# automake and libtool depend on this, so uninstall them.
#
uninstall_libtool "$@"
uninstall_automake "$@"
echo "Uninstalling GNU autoconf:"
cd autoconf-$installed_autoconf_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm autoconf-$installed_autoconf_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf autoconf-$installed_autoconf_version
rm -rf autoconf-$installed_autoconf_version.tar.xz
fi
installed_autoconf_version=""
fi
}
install_automake() {
if [ "$AUTOMAKE_VERSION" -a ! -f automake-$AUTOMAKE_VERSION-done ] ; then
echo "Downloading, building and installing GNU automake..."
[ -f automake-$AUTOMAKE_VERSION.tar.xz ] || curl -L -O ftp://ftp.gnu.org/gnu/automake/automake-$AUTOMAKE_VERSION.tar.xz || exit 1
$no_build && echo "Skipping installation" && return
xzcat automake-$AUTOMAKE_VERSION.tar.xz | tar xf - || exit 1
cd automake-$AUTOMAKE_VERSION
./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch automake-$AUTOMAKE_VERSION-done
fi
}
uninstall_automake() {
if [ ! -z "$installed_automake_version" ] ; then
#
# libtool depends on this(?), so uninstall it.
#
uninstall_libtool "$@"
echo "Uninstalling GNU automake:"
cd automake-$installed_automake_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm automake-$installed_automake_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf automake-$installed_automake_version
rm -rf automake-$installed_automake_version.tar.xz
fi
installed_automake_version=""
fi
}
install_libtool() {
if [ "$LIBTOOL_VERSION" -a ! -f libtool-$LIBTOOL_VERSION-done ] ; then
echo "Downloading, building and installing GNU libtool..."
[ -f libtool-$LIBTOOL_VERSION.tar.xz ] || curl -L -O ftp://ftp.gnu.org/gnu/libtool/libtool-$LIBTOOL_VERSION.tar.xz || exit 1
$no_build && echo "Skipping installation" && return
xzcat libtool-$LIBTOOL_VERSION.tar.xz | tar xf - || exit 1
cd libtool-$LIBTOOL_VERSION
./configure --program-prefix=g || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch libtool-$LIBTOOL_VERSION-done
fi
}
uninstall_libtool() {
if [ ! -z "$installed_libtool_version" ] ; then
echo "Uninstalling GNU libtool:"
cd libtool-$installed_libtool_version
$DO_MV /usr/local/bin/glibtool /usr/local/bin/libtool
$DO_MV /usr/local/bin/glibtoolize /usr/local/bin/libtoolize
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm libtool-$installed_libtool_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf libtool-$installed_libtool_version
rm -rf libtool-$installed_libtool_version.tar.xz
fi
installed_libtool_version=""
fi
}
install_ninja() {
if [ "$NINJA_VERSION" -a ! -f ninja-$NINJA_VERSION-done ] ; then
echo "Downloading and installing Ninja:"
#
# Download the zipball, unpack it, and move the binary to
# /usr/local/bin.
#
[ -f ninja-mac-v$NINJA_VERSION.zip ] || curl -L -o ninja-mac-v$NINJA_VERSION.zip https://github.com/ninja-build/ninja/releases/download/v$NINJA_VERSION/ninja-mac.zip || exit 1
$no_build && echo "Skipping installation" && return
unzip ninja-mac-v$NINJA_VERSION.zip
sudo mv ninja /usr/local/bin
touch ninja-$NINJA_VERSION-done
fi
}
uninstall_ninja() {
if [ ! -z "$installed_ninja_version" ]; then
echo "Uninstalling Ninja:"
sudo rm /usr/local/bin/ninja
rm ninja-$installed_ninja_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
rm -f ninja-mac-v$installed_ninja_version.zip
fi
installed_ninja_version=""
fi
}
install_asciidoctor() {
if [ ! -f asciidoctor-${ASCIIDOCTOR_VERSION}-done ]; then
echo "Downloading and installing Asciidoctor:"
sudo gem install -V asciidoctor --version "=${ASCIIDOCTOR_VERSION}"
touch asciidoctor-${ASCIIDOCTOR_VERSION}-done
fi
}
uninstall_asciidoctor() {
if [ ! -z "$installed_asciidoctor_version" ]; then
echo "Uninstalling Asciidoctor:"
sudo gem uninstall -V asciidoctor --version "=${installed_asciidoctor_version}"
rm asciidoctor-$installed_asciidoctor_version-done
##if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version,
# whatever it might happen to be called.
#
## rm -f asciidoctor-$installed_asciidoctor_version
##fi
installed_asciidoctor_version=""
fi
}
install_asciidoctorpdf() {
if [ ! -f asciidoctorpdf-${ASCIIDOCTORPDF_VERSION}-done ]; then
## XXX gem does not track dependencies that are installed for asciidoctor-pdf
## record them for uninstallation
## ttfunk, pdf-core, prawn, prawn-table, Ascii85, ruby-rc4, hashery, afm, pdf-reader, prawn-templates, public_suffix, addressable, css_parser, prawn-svg, prawn-icon, safe_yaml, thread_safe, polyglot, treetop, asciidoctor-pdf
echo "Downloading and installing Asciidoctor-pdf:"
sudo gem install -V asciidoctor-pdf --version "=${ASCIIDOCTORPDF_VERSION}"
touch asciidoctorpdf-${ASCIIDOCTORPDF_VERSION}-done
fi
}
uninstall_asciidoctorpdf() {
if [ ! -z "$installed_asciidoctorpdf_version" ]; then
echo "Uninstalling Asciidoctor:"
sudo gem uninstall -V asciidoctor-pdf --version "=${installed_asciidoctorpdf_version}"
## XXX uninstall dependencies
rm asciidoctorpdf-$installed_asciidoctorpdf_version-done
##if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version,
# whatever it might happen to be called.
#
## rm -f asciidoctorpdf-$installed_asciidoctorpdf_version
##fi
installed_asciidoctorpdf_version=""
fi
}
install_cmake() {
if [ ! -f cmake-$CMAKE_VERSION-done ]; then
echo "Downloading and installing CMake:"
CMAKE_MAJOR_VERSION="`expr $CMAKE_VERSION : '\([0-9][0-9]*\).*'`"
CMAKE_MINOR_VERSION="`expr $CMAKE_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
CMAKE_MAJOR_MINOR_VERSION=$CMAKE_MAJOR_VERSION.$CMAKE_MINOR_VERSION
#
# NOTE: the "64" in "Darwin64" doesn't mean "64-bit-only"; the
# package in question supports both 32-bit and 64-bit x86.
#
case "$CMAKE_MAJOR_VERSION" in
0|1|2)
echo "CMake $CMAKE_VERSION" is too old 1>&2
;;
3)
#
# Download the DMG and do a drag install, where "drag" means
# "mv".
#
# 3.1.1 to 3.19.1 have a Darwin-x86_64 DMG.
# 3.19.2 has a macos-universal DMG for 10.10 and later
# 3.19.3 and later have a macos-universal DMG for 10.13 and later,
# and a macos10.10-universal DMG for 10.10 and later.
#
if [ "$CMAKE_MINOR_VERSION" -lt 5 ]; then
echo "CMake $CMAKE_VERSION" is too old 1>&2
elif [ "$CMAKE_MINOR_VERSION" -lt 19 -o \
"$CMAKE_VERSION" = 3.19.0 -o \
"$CMAKE_VERSION" = 3.19.1 ]; then
type="Darwin-x86_64"
elif [ "$CMAKE_VERSION" = 3.19.2 -o \
"$DARWIN_MAJOR_VERSION" -ge 17 ]; then
type="macos-universal"
else
type="macos10.0-universal"
fi
[ -f cmake-$CMAKE_VERSION-$type.dmg ] || curl -L -O https://cmake.org/files/v$CMAKE_MAJOR_MINOR_VERSION/cmake-$CMAKE_VERSION-$type.dmg || exit 1
$no_build && echo "Skipping installation" && return
sudo hdiutil attach cmake-$CMAKE_VERSION-$type.dmg || exit 1
sudo ditto /Volumes/cmake-$CMAKE_VERSION-$type/CMake.app /Applications/CMake.app || exit 1
#
# Plant the appropriate symbolic links in /usr/local/bin.
# It's a drag-install, so there's no installer to make them,
# and the CMake code to put them in place is lame, as
#
# 1) it defaults to /usr/bin, not /usr/local/bin;
# 2) it doesn't request the necessary root privileges;
# 3) it can't be run from the command line;
#
# so we do it ourselves.
#
for i in ccmake cmake cmake-gui cmakexbuild cpack ctest
do
sudo ln -s /Applications/CMake.app/Contents/bin/$i /usr/local/bin/$i
done
sudo hdiutil detach /Volumes/cmake-$CMAKE_VERSION-$type
;;
*)
;;
esac
touch cmake-$CMAKE_VERSION-done
fi
}
uninstall_cmake() {
if [ ! -z "$installed_cmake_version" ]; then
echo "Uninstalling CMake:"
installed_cmake_major_version="`expr $installed_cmake_version : '\([0-9][0-9]*\).*'`"
case "$installed_cmake_major_version" in
0|1|2)
echo "CMake $installed_cmake_version" is too old 1>&2
;;
3)
sudo rm -rf /Applications/CMake.app
for i in ccmake cmake cmake-gui cmakexbuild cpack ctest
do
sudo rm -f /usr/local/bin/$i
done
rm cmake-$installed_cmake_version-done
;;
esac
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version,
# whatever it might happen to be called.
#
rm -f cmake-$installed_cmake_version-Darwin-x86_64.dmg
rm -f cmake-$installed_cmake_version-macos-universal.dmg
rm -f cmake-$installed_cmake_version-macos10.0-universal.dmg
fi
installed_cmake_version=""
fi
}
install_meson() {
#
# Install Meson with pip3 if we don't have it already.
#
if $MESON --version >/dev/null 2>&1
then
# We have it.
:
else
sudo pip3 install meson
touch meson-done
fi
}
uninstall_meson() {
#
# If we installed Meson, uninstal it with pip3.
#
if [ -f meson-done ] ; then
sudo pip3 uninstall meson
rm -f meson-done
fi
}
install_gettext() {
if [ ! -f gettext-$GETTEXT_VERSION-done ] ; then
echo "Downloading, building, and installing GNU gettext:"
[ -f gettext-$GETTEXT_VERSION.tar.gz ] || curl -L -O https://ftp.gnu.org/pub/gnu/gettext/gettext-$GETTEXT_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat gettext-$GETTEXT_VERSION.tar.gz | tar xf - || exit 1
cd gettext-$GETTEXT_VERSION
CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch gettext-$GETTEXT_VERSION-done
fi
}
uninstall_gettext() {
if [ ! -z "$installed_gettext_version" ] ; then
#
# GLib depends on this, so uninstall it.
#
uninstall_glib "$@"
echo "Uninstalling GNU gettext:"
cd gettext-$installed_gettext_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm gettext-$installed_gettext_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf gettext-$installed_gettext_version
rm -rf gettext-$installed_gettext_version.tar.gz
fi
installed_gettext_version=""
fi
}
install_pkg_config() {
if [ ! -f pkg-config-$PKG_CONFIG_VERSION-done ] ; then
echo "Downloading, building, and installing pkg-config:"
[ -f pkg-config-$PKG_CONFIG_VERSION.tar.gz ] || curl -L -O https://pkgconfig.freedesktop.org/releases/pkg-config-$PKG_CONFIG_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat pkg-config-$PKG_CONFIG_VERSION.tar.gz | tar xf - || exit 1
cd pkg-config-$PKG_CONFIG_VERSION
./configure --with-internal-glib || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch pkg-config-$PKG_CONFIG_VERSION-done
fi
}
uninstall_pkg_config() {
if [ ! -z "$installed_pkg_config_version" ] ; then
echo "Uninstalling pkg-config:"
cd pkg-config-$installed_pkg_config_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm pkg-config-$installed_pkg_config_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf pkg-config-$installed_pkg_config_version
rm -rf pkg-config-$installed_pkg_config_version.tar.gz
fi
installed_pkg_config_version=""
fi
}
install_glib() {
if [ ! -f glib-$GLIB_VERSION-done ] ; then
echo "Downloading, building, and installing GLib:"
glib_dir=`expr $GLIB_VERSION : '\([0-9][0-9]*\.[0-9][0-9]*\).*'`
#
# Starting with GLib 2.28.8, xz-compressed tarballs are available.
#
[ -f glib-$GLIB_VERSION.tar.xz ] || curl -L -O https://download.gnome.org/sources/glib/$glib_dir/glib-$GLIB_VERSION.tar.xz || exit 1
$no_build && echo "Skipping installation" && return
xzcat glib-$GLIB_VERSION.tar.xz | tar xf - || exit 1
cd glib-$GLIB_VERSION
#
# First, determine where the system include files are.
# (It's not necessarily /usr/include.) There's a bit of a
# greasy hack here; pre-5.x versions of the developer tools
# don't support the --show-sdk-path option, and will produce
# no output, so includedir will be set to /usr/include
# (in those older versions of the developer tools, there is
# a /usr/include directory).
#
# We need this for several things we do later.
#
includedir=`SDKROOT="$SDKPATH" xcrun --show-sdk-path 2>/dev/null`/usr/include
#
# GLib's configuration procedure, whether autotools-based or
# Meson-based, really likes to use pkg-config to find libraries,
# including libffi.
#
# At least some versions of macOS provide libffi, but, as macOS
# doesn't provide pkg-config, they don't provide a .pc file for
# it, so the autotools-based configuration needs some trickery
# to get it to find the OS-supplied libffi, and the Meson-based
# configuration simply won't find it at all.
#
# So, if we have a system-provided libffi, but pkg-config
# doesn't find libffi, we construct a .pc file for that libffi,
# and install it in /usr/local/lib/pkgconfig.
#
if pkg-config libffi ; then
# It found libffi; no need to install a .pc file, and we
# don't want to overwrite what's there already.
:
elif [ ! -e $includedir/ffi/ffi.h ] ; then
# We don't appear to have libffi as part of the system, so
# let the configuration process figure out what to do.
#
# We test for the header file, not the library, because, in
# Big Sur and later, there's no guarantee that, for a system
# shared library, there's a corresponding dylib file in
# /usr/lib.
:
else
#
# We have libffi, but pkg-config didn't find it; generate
# and install the .pc file.
#
#
# Now generate the .pc file.
#
# We generate the contents of the .pc file by using cat with
# a here document containing a template for the file and
# piping that to a sed command that replaces @INCLUDEDIR@ in
# the template with the include directory we discovered
# above, so that the .pc file gives the compiler flags
# necessary to find the libffi headers (which are *not*
# necessarily in /usr/include, as per the above).
#
# The EOF marker for the here document is in quotes, to tell
# the shell not to do shell expansion, as .pc files use a
# syntax to refer to .pc file variables that looks like the
# syntax to refer to shell variables.
#
# The writing of the libffi.pc file is a greasy hack - the
# process of generating the contents of the .pc file writes
# to the standard output, but running the last process in
# the pipeline as root won't allow the shell that's
# *running* it to open the .pc file if we don't have write
# permission on /usr/local/lib/pkgconfig, so we need a
# program that creates a file and then reads from the
# standard input and writes to that file. UN*Xes have a
# program that does that; it's called "tee". :-)
#
# However, it *also* writes the file to the standard output,
# so we redirect that to /dev/null when we run it.
#
cat <<"EOF" | sed "s;@INCLUDEDIR@;$includedir;" | $DO_TEE_TO_PC_FILE /usr/local/lib/pkgconfig/libffi.pc >/dev/null
prefix=/usr
libdir=${prefix}/lib
includedir=@INCLUDEDIR@
Name: ffi
Description: Library supporting Foreign Function Interfaces
Version: 3.2.9999
Libs: -L${libdir} -lffi
Cflags: -I${includedir}/ffi
EOF
fi
#
# GLib 2.59.1 and later use Meson+Ninja as the build system.
#
case $GLIB_MAJOR_VERSION in
1)
echo "GLib $GLIB_VERSION" is too old 1>&2
;;
*)
case $GLIB_MINOR_VERSION in
[0-9]|1[0-9]|2[0-9]|3[0-7])
echo "GLib $GLIB_VERSION" is too old 1>&2
;;
3[8-9]|4[0-9]|5[0-8])
if [ ! -f ./configure ]; then
LIBTOOLIZE=glibtoolize ./autogen.sh
fi
#
# At least with the version of Xcode that comes with
# Leopard, /usr/include/ffi/fficonfig.h doesn't define
# MACOSX, which causes the build of GLib to fail for at
# least some versions of GLib. If we don't find
# "#define.*MACOSX" in /usr/include/ffi/fficonfig.h,
# explicitly define it.
#
# While we're at it, suppress -Wformat-nonliteral to
# avoid a case where clang's stricter rules on when not
# to complain about non-literal format arguments cause
# it to complain about code that's safe but it wasn't
# told that. See my comment #25 in GNOME bug 691608:
#
# https://bugzilla.gnome.org/show_bug.cgi?id=691608#c25
#
if grep -qs '#define.*MACOSX' $includedir/ffi/fficonfig.h
then
# It's defined, nothing to do
CFLAGS="$CFLAGS -Wno-format-nonliteral $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS -Wno-format-nonliteral $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
else
CFLAGS="$CFLAGS -DMACOSX -Wno-format-nonliteral $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS -DMACOSX -Wno-format-nonliteral $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
fi
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
;;
59|[6-9][0-9]|[1-9][0-9][0-9])
#
# 2.59.0 doesn't require Meson and Ninja, but it
# supports it, and I'm too lazy to add a dot-dot
# version check.
#
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" $MESON _build || exit 1
ninja $MAKE_BUILD_OPTS -C _build || exit 1
$DO_NINJA_INSTALL || exit 1
;;
*)
echo "Glib's put out 1000 2.x releases?" 1>&2
;;
esac
esac
cd ..
touch glib-$GLIB_VERSION-done
fi
}
uninstall_glib() {
if [ ! -z "$installed_glib_version" ] ; then
echo "Uninstalling GLib:"
cd glib-$installed_glib_version
installed_glib_major_version="`expr $installed_glib_version : '\([0-9][0-9]*\).*'`"
installed_glib_minor_version="`expr $installed_glib_version : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
installed_glib_dotdot_version="`expr $installed_glib_version : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
installed_glib_major_minor_version=$installed_glib_major_version.$installed_glib_minor_version
installed_glib_major_minor_dotdot_version=$installed_glib_major_version.$installed_glib_minor_version.$installed_glib_dotdot_version
#
# GLib 2.59.1 and later use Meson+Ninja as the build system.
#
case $installed_glib_major_version in
1)
$DO_MAKE_UNINSTALL || exit 1
#
# This appears to delete dependencies out from under other
# Makefiles in the tree, causing it to fail. At least until
# that gets fixed, if it ever gets fixed, we just ignore the
# exit status of "make distclean"
#
# make distclean || exit 1
make distclean || echo "Ignoring make distclean failure" 1>&2
;;
*)
case $installed_glib_minor_version in
[0-9]|1[0-9]|2[0-9]|3[0-9]|4[0-9]|5[0-8])
$DO_MAKE_UNINSTALL || exit 1
#
# This appears to delete dependencies out from under other
# Makefiles in the tree, causing it to fail. At least until
# that gets fixed, if it ever gets fixed, we just ignore the
# exit status of "make distclean"
#
# make distclean || exit 1
make distclean || echo "Ignoring make distclean failure" 1>&2
;;
59|[6-9][0-9]|[1-9][0-9][0-9])
#
# 2.59.0 doesn't require Meson and Ninja, but it
# supports it, and I'm too lazy to add a dot-dot
# version check.
#
$DO_NINJA_UNINSTALL || exit 1
#
# For Meson+Ninja, we do the build in an _build
# subdirectory, so the equivalent of "make distclean"
# is just to remove the directory tree.
#
rm -rf _build
;;
*)
echo "Glib's put out 1000 2.x releases?" 1>&2
;;
esac
esac
cd ..
rm glib-$installed_glib_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf glib-$installed_glib_version
rm -rf glib-$installed_glib_version.tar.xz
fi
installed_glib_version=""
fi
}
install_qt() {
if [ "$QT_VERSION" -a ! -f qt-$QT_VERSION-done ]; then
echo "Downloading and installing Qt:"
#
# What you get for this URL might just be a 302 Found reply, so use
# -L so we get redirected.
#
# 5.0 - 5.1: qt-mac-opensource-{version}-clang-offline.dmg
# 5.2.0: qt-mac-opensource-{version}.dmg
# 5.2.1: qt-opensource-mac-x64-clang-{version}.dmg
# 5.3 - 5.8: qt-opensource-mac-x64-clang-{version}.dmg
# 5.9 - 5.14: qt-opensource-mac-x64-{version}.dmg
# 5.15 - 6.0: Offline installers no longer provided.
# ( https://download.qt.io/archive/qt/5.15/5.15.0/OFFLINE_README.txt )
# XXX: We need a different approach for QT >= 5.15
#
case $QT_MAJOR_VERSION in
1|2|3|4)
echo "Qt $QT_VERSION" is too old 1>&2
;;
5)
case $QT_MINOR_VERSION in
0|1|2|3|4|5|6|7|8)
echo "Qt $QT_VERSION" is too old 1>&2
;;
9|10|11|12|13|14)
QT_VOLUME=qt-opensource-mac-x64-$QT_VERSION
;;
*)
echo "The Qt Company no longer provides open source offline installers for Qt $QT_VERSION" 1>&2
;;
esac
[ -f $QT_VOLUME.dmg ] || curl -L -O https://download.qt.io/archive/qt/$QT_MAJOR_MINOR_VERSION/$QT_MAJOR_MINOR_DOTDOT_VERSION/$QT_VOLUME.dmg || exit 1
$no_build && echo "Skipping installation" && return
sudo hdiutil attach $QT_VOLUME.dmg || exit 1
#
# Run the installer executable directly, so that we wait for
# it to finish. Then unmount the volume.
#
/Volumes/$QT_VOLUME/$QT_VOLUME.app/Contents/MacOS/$QT_VOLUME
sudo hdiutil detach /Volumes/$QT_VOLUME
touch qt-$QT_VERSION-done
;;
*)
echo "The Qt Company no longer provides open source offline installers for Qt $QT_VERSION" 1>&2
;;
esac
fi
}
uninstall_qt() {
if [ ! -z "$installed_qt_version" ] ; then
echo "Uninstalling Qt:"
rm -rf $HOME/Qt$installed_qt_version
rm qt-$installed_qt_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded version.
#
# 5.0 - 5.1: qt-mac-opensource-{version}-clang-offline.dmg
# 5.2.0: qt-mac-opensource-{version}.dmg
# 5.2.1: qt-opensource-mac-x64-clang-{version}.dmg
# 5.3 - 5.8: qt-opensource-mac-x64-clang-{version}.dmg
# 5.9 - 5.14: qt-opensource-mac-x64-{version}.dmg
#
installed_qt_major_version="`expr $installed_qt_version : '\([0-9][0-9]*\).*'`"
installed_qt_minor_version="`expr $installed_qt_version : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
installed_qt_dotdot_version="`expr $installed_qt_version : '[0-9][0-9]*\.[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
case $installed_qt_major_version in
1|2|3|4)
echo "Qt $installed_qt_version" is too old 1>&2
;;
5*)
case $installed_qt_minor_version in
0|1|2|3|4|5)
echo "Qt $installed_qt_version" is too old 1>&2
;;
6|7|8)
installed_qt_volume=qt-opensource-mac-x64-clang-$installed_qt_version.dmg
;;
9|10|11|12|13|14)
installed_qt_volume=qt-opensource-mac-x64-$installed_qt_version.dmg
;;
esac
esac
rm -f $installed_qt_volume
fi
installed_qt_version=""
fi
}
install_libsmi() {
if [ "$LIBSMI_VERSION" -a ! -f libsmi-$LIBSMI_VERSION-done ] ; then
echo "Downloading, building, and installing libsmi:"
[ -f libsmi-$LIBSMI_VERSION.tar.gz ] || curl -L -O https://www.ibr.cs.tu-bs.de/projects/libsmi/download/libsmi-$LIBSMI_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat libsmi-$LIBSMI_VERSION.tar.gz | tar xf - || exit 1
cd libsmi-$LIBSMI_VERSION
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch libsmi-$LIBSMI_VERSION-done
fi
}
uninstall_libsmi() {
if [ ! -z "$installed_libsmi_version" ] ; then
echo "Uninstalling libsmi:"
cd libsmi-$installed_libsmi_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm libsmi-$installed_libsmi_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf libsmi-$installed_libsmi_version
rm -rf libsmi-$installed_libsmi_version.tar.gz
fi
installed_libsmi_version=""
fi
}
install_libgpg_error() {
if [ "$LIBGPG_ERROR_VERSION" -a ! -f libgpg-error-$LIBGPG_ERROR_VERSION-done ] ; then
echo "Downloading, building, and installing libgpg-error:"
[ -f libgpg-error-$LIBGPG_ERROR_VERSION.tar.bz2 ] || curl -L -O https://www.gnupg.org/ftp/gcrypt/libgpg-error/libgpg-error-$LIBGPG_ERROR_VERSION.tar.bz2 || exit 1
$no_build && echo "Skipping installation" && return
bzcat libgpg-error-$LIBGPG_ERROR_VERSION.tar.bz2 | tar xf - || exit 1
cd libgpg-error-$LIBGPG_ERROR_VERSION
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch libgpg-error-$LIBGPG_ERROR_VERSION-done
fi
}
uninstall_libgpg_error() {
if [ ! -z "$installed_libgpg_error_version" ] ; then
#
# libgcrypt depends on this, so uninstall it.
#
uninstall_libgcrypt "$@"
echo "Uninstalling libgpg-error:"
cd libgpg-error-$installed_libgpg_error_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm libgpg-error-$installed_libgpg_error_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf libgpg-error-$installed_libgpg_error_version
rm -rf libgpg-error-$installed_libgpg_error_version.tar.bz2
fi
installed_libgpg_error_version=""
fi
}
install_libgcrypt() {
if [ "$LIBGCRYPT_VERSION" -a ! -f libgcrypt-$LIBGCRYPT_VERSION-done ] ; then
#
# libgpg-error is required for libgcrypt.
#
if [ -z $LIBGPG_ERROR_VERSION ]
then
echo "libgcrypt requires libgpg-error, but you didn't install libgpg-error." 1>&2
exit 1
fi
echo "Downloading, building, and installing libgcrypt:"
[ -f libgcrypt-$LIBGCRYPT_VERSION.tar.gz ] || curl -L -O https://www.gnupg.org/ftp/gcrypt/libgcrypt/libgcrypt-$LIBGCRYPT_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat libgcrypt-$LIBGCRYPT_VERSION.tar.gz | tar xf - || exit 1
cd libgcrypt-$LIBGCRYPT_VERSION
#
# The assembler language code is not compatible with the macOS
# x86 assembler (or is it an x86-64 vs. x86-32 issue?).
#
# libgcrypt expects gnu89, not c99/gnu99, semantics for
# "inline". See, for example:
#
# https://lists.freebsd.org/pipermail/freebsd-ports-bugs/2010-October/198809.html
#
CFLAGS="$CFLAGS -std=gnu89 $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --disable-asm || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch libgcrypt-$LIBGCRYPT_VERSION-done
fi
}
uninstall_libgcrypt() {
if [ ! -z "$installed_libgcrypt_version" ] ; then
echo "Uninstalling libgcrypt:"
cd libgcrypt-$installed_libgcrypt_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm libgcrypt-$installed_libgcrypt_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf libgcrypt-$installed_libgcrypt_version
rm -rf libgcrypt-$installed_libgcrypt_version.tar.gz
fi
installed_libgcrypt_version=""
fi
}
install_gmp() {
if [ "$GMP_VERSION" -a ! -f gmp-$GMP_VERSION-done ] ; then
echo "Downloading, building, and installing GMP:"
[ -f gmp-$GMP_VERSION.tar.lz ] || curl -L -O https://gmplib.org/download/gmp/gmp-$GMP_VERSION.tar.lz || exit 1
$no_build && echo "Skipping installation" && return
lzip -c -d gmp-$GMP_VERSION.tar.lz | tar xf - || exit 1
cd gmp-$GMP_VERSION
# Create a fat binary: https://gmplib.org/manual/Notes-for-Package-Builds.html
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --enable-fat || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch gmp-$GMP_VERSION-done
fi
}
uninstall_gmp() {
if [ ! -z "$installed_gmp_version" ] ; then
#
# Nettle depends on this, so uninstall it.
#
uninstall_nettle "$@"
echo "Uninstalling GMP:"
cd gmp-$installed_gmp_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm gmp-$installed_gmp_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf gmp-$installed_gmp_version
rm -rf gmp-$installed_gmp_version.tar.lz
fi
installed_gmp_version=""
fi
}
install_libtasn1() {
if [ "$LIBTASN1_VERSION" -a ! -f libtasn1-$LIBTASN1_VERSION-done ] ; then
echo "Downloading, building, and installing libtasn1:"
[ -f libtasn1-$LIBTASN1_VERSION.tar.gz ] || curl -L -O https://ftpmirror.gnu.org/libtasn1/libtasn1-$LIBTASN1_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat libtasn1-$LIBTASN1_VERSION.tar.gz | tar xf - || exit 1
cd libtasn1-$LIBTASN1_VERSION
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch libtasn1-$LIBTASN1_VERSION-done
fi
}
uninstall_libtasn1() {
if [ ! -z "$installed_libtasn1_version" ] ; then
#
# p11-kit depends on this, so uninstall it.
#
uninstall_p11_kit "$@"
echo "Uninstalling libtasn1:"
cd libtasn1-$installed_libtasn1_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm libtasn1-$installed_libtasn1_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf libtasn1-$installed_libtasn1_version
rm -rf libtasn1-$installed_libtasn1_version.tar.gz
fi
installed_libtasn1_version=""
fi
}
install_p11_kit() {
if [ "$P11KIT_VERSION" -a ! -f p11-kit-$P11KIT_VERSION-done ] ; then
echo "Downloading, building, and installing p11-kit:"
[ -f p11-kit-$P11KIT_VERSION.tar.xz ] || curl -L -O https://github.com/p11-glue/p11-kit/releases/download/$P11KIT_VERSION/p11-kit-$P11KIT_VERSION.tar.xz || exit 1
$no_build && echo "Skipping installation" && return
xzcat p11-kit-$P11KIT_VERSION.tar.xz | tar xf - || exit 1
cd p11-kit-$P11KIT_VERSION
#
# Prior to Catalina, the libffi that's supplied with macOS
# doesn't support ffi_closure_alloc() or ffi_prep_closure_loc(),
# both of which are required by p11-kit if built with libffi.
#
# According to
#
# https://p11-glue.github.io/p11-glue/p11-kit/manual/devel-building.html
#
# libffi is used "for sharing of PKCS#11 modules between
# multiple callers in the same process. It is highly recommended
# that this dependency be treated as a required dependency.",
# but it's not clear that this matters to us, so we just
# configure p11-kit not to use libffi.
#
CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --without-libffi --without-trust-paths || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch p11-kit-$P11KIT_VERSION-done
fi
}
uninstall_p11_kit() {
if [ ! -z "$installed_p11_kit_version" ] ; then
#
# Nettle depends on this, so uninstall it.
#
uninstall_nettle "$@"
echo "Uninstalling p11-kit:"
cd p11-kit-$installed_p11_kit_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm p11-kit-$installed_p11_kit_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf p11-kit-$installed_p11_kit_version
rm -rf p11-kit-$installed_p11_kit_version.tar.xz
fi
installed_p11_kit_version=""
fi
}
install_nettle() {
if [ "$NETTLE_VERSION" -a ! -f nettle-$NETTLE_VERSION-done ] ; then
echo "Downloading, building, and installing Nettle:"
[ -f nettle-$NETTLE_VERSION.tar.gz ] || curl -L -O https://ftp.gnu.org/gnu/nettle/nettle-$NETTLE_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat nettle-$NETTLE_VERSION.tar.gz | tar xf - || exit 1
cd nettle-$NETTLE_VERSION
if [ "$DARWIN_PROCESSOR_ARCH" = "arm" ] ; then
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --disable-assembler || exit 1
else
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
fi
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch nettle-$NETTLE_VERSION-done
fi
}
uninstall_nettle() {
if [ ! -z "$installed_nettle_version" ] ; then
#
# GnuTLS depends on this, so uninstall it.
#
uninstall_gnutls "$@"
echo "Uninstalling Nettle:"
cd nettle-$installed_nettle_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm nettle-$installed_nettle_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf nettle-$installed_nettle_version
rm -rf nettle-$installed_nettle_version.tar.gz
fi
installed_nettle_version=""
fi
}
install_gnutls() {
if [ "$GNUTLS_VERSION" -a ! -f gnutls-$GNUTLS_VERSION-done ] ; then
#
# GnuTLS requires Nettle.
#
if [ -z $NETTLE_VERSION ]
then
echo "GnuTLS requires Nettle, but you didn't install Nettle" 1>&2
exit 1
fi
echo "Downloading, building, and installing GnuTLS:"
if [[ $GNUTLS_MAJOR_VERSION -ge 3 ]]
then
#
# Starting with GnuTLS 3.x, the tarballs are compressed with
# xz rather than bzip2.
#
[ -f gnutls-$GNUTLS_VERSION.tar.xz ] || curl -L -O https://www.gnupg.org/ftp/gcrypt/gnutls/v$GNUTLS_MAJOR_VERSION.$GNUTLS_MINOR_VERSION/gnutls-$GNUTLS_VERSION.tar.xz || exit 1
$no_build && echo "Skipping installation" && return
xzcat gnutls-$GNUTLS_VERSION.tar.xz | tar xf - || exit 1
else
[ -f gnutls-$GNUTLS_VERSION.tar.bz2 ] || curl -L -O https://www.gnupg.org/ftp/gcrypt/gnutls/v$GNUTLS_MAJOR_VERSION.$GNUTLS_MINOR_VERSION/gnutls-$GNUTLS_VERSION.tar.bz2 || exit 1
$no_build && echo "Skipping installation" && return
bzcat gnutls-$GNUTLS_VERSION.tar.bz2 | tar xf - || exit 1
fi
cd gnutls-$GNUTLS_VERSION
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --with-included-unistring --disable-guile || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch gnutls-$GNUTLS_VERSION-done
fi
}
uninstall_gnutls() {
if [ ! -z "$installed_gnutls_version" ] ; then
echo "Uninstalling GnuTLS:"
cd gnutls-$installed_gnutls_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm gnutls-$installed_gnutls_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf gnutls-$installed_gnutls_version
rm -rf gnutls-$installed_gnutls_version.tar.bz2
fi
installed_gnutls_version=""
fi
}
install_lua() {
if [ "$LUA_VERSION" -a ! -f lua-$LUA_VERSION-done ] ; then
echo "Downloading, building, and installing Lua:"
[ -f lua-$LUA_VERSION.tar.gz ] || curl -L -O https://www.lua.org/ftp/lua-$LUA_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat lua-$LUA_VERSION.tar.gz | tar xf - || exit 1
cd lua-$LUA_VERSION
make MYCFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" MYLDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" $MAKE_BUILD_OPTS macosx || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch lua-$LUA_VERSION-done
fi
}
uninstall_lua() {
if [ ! -z "$installed_lua_version" ] ; then
echo "Uninstalling Lua:"
#
# Lua has no "make uninstall", so just remove stuff manually.
# There's no configure script, so there's no need for
# "make distclean", either; just do "make clean".
#
(cd /usr/local/bin; $DO_RM -f lua luac)
(cd /usr/local/include; $DO_RM -f lua.h luaconf.h lualib.h lauxlib.h lua.hpp)
(cd /usr/local/lib; $DO_RM -f liblua.a)
(cd /usr/local/man/man1; $DO_RM -f lua.1 luac.1)
cd lua-$installed_lua_version
make clean || exit 1
cd ..
rm lua-$installed_lua_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf lua-$installed_lua_version
rm -rf lua-$installed_lua_version.tar.gz
fi
installed_lua_version=""
fi
}
install_snappy() {
if [ "$SNAPPY_VERSION" -a ! -f snappy-$SNAPPY_VERSION-done ] ; then
echo "Downloading, building, and installing snappy:"
[ -f snappy-$SNAPPY_VERSION.tar.gz ] || curl -L -o snappy-$SNAPPY_VERSION.tar.gz https://github.com/google/snappy/archive/$SNAPPY_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat snappy-$SNAPPY_VERSION.tar.gz | tar xf - || exit 1
cd snappy-$SNAPPY_VERSION
mkdir build_dir
cd build_dir
#
# Build a shared library, because we'll be linking libwireshark,
# which is a C library, with libsnappy, and libsnappy is a C++
# library and requires the C++ run time; the shared library
# will carry that dependency with it, so linking with it should
# Just Work.
#
MACOSX_DEPLOYMENT_TARGET=$min_osx_target SDKROOT="$SDKPATH" cmake -DBUILD_SHARED_LIBS=YES ../ || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ../..
touch snappy-$SNAPPY_VERSION-done
fi
}
uninstall_snappy() {
if [ ! -z "$installed_snappy_version" ] ; then
echo "Uninstalling snappy:"
cd snappy-$installed_snappy_version
#
# snappy uses cmake and doesn't support "make uninstall";
# just remove what we know it installs.
#
# $DO_MAKE_UNINSTALL || exit 1
if [ -s build_dir/install_manifest.txt ] ; then
while read -r ; do $DO_RM -v "$REPLY" ; done < <(cat build_dir/install_manifest.txt; echo)
else
$DO_RM -f /usr/local/lib/libsnappy.1.1.8.dylib \
/usr/local/lib/libsnappy.1.dylib \
/usr/local/lib/libsnappy.dylib \
/usr/local/include/snappy-c.h \
/usr/local/include/snappy-sinksource.h \
/usr/local/include/snappy-stubs-public.h \
/usr/local/include/snappy.h \
/usr/local/lib/cmake/Snappy/SnappyConfig.cmake \
/usr/local/lib/cmake/Snappy/SnappyConfigVersion.cmake \
/usr/local/lib/cmake/Snappy/SnappyTargets-noconfig.cmake \
/usr/local/lib/cmake/Snappy/SnappyTargets.cmake || exit 1
fi
#
# snappy uses cmake and doesn't support "make distclean";
#.just remove the entire build directory.
#
# make distclean || exit 1
rm -rf build_dir || exit 1
cd ..
rm snappy-$installed_snappy_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf snappy-$installed_snappy_version
rm -rf snappy-$installed_snappy_version.tar.gz
fi
installed_snappy_version=""
fi
}
install_zstd() {
if [ "$ZSTD_VERSION" -a ! -f zstd-$ZSTD_VERSION-done ] ; then
echo "Downloading, building, and installing zstd:"
[ -f zstd-$ZSTD_VERSION.tar.gz ] || curl -L -O https://github.com/facebook/zstd/releases/download/v$ZSTD_VERSION/zstd-$ZSTD_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat zstd-$ZSTD_VERSION.tar.gz | tar xf - || exit 1
cd zstd-$ZSTD_VERSION
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch zstd-$ZSTD_VERSION-done
fi
}
uninstall_zstd() {
if [ ! -z "$installed_zstd_version" ] ; then
echo "Uninstalling zstd:"
cd zstd-$installed_zstd_version
$DO_MAKE_UNINSTALL || exit 1
#
# zstd has no configure script, so there's no need for
# "make distclean", and the Makefile supplied with it
# has no "make distclean" rule; just do "make clean".
#
make clean || exit 1
cd ..
rm zstd-$installed_zstd_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf zstd-$installed_zstd_version
rm -rf zstd-$installed_zstd_version.tar.gz
fi
installed_zstd_version=""
fi
}
install_libxml2() {
if [ "$LIBXML2_VERSION" -a ! -f libxml2-$LIBXML2_VERSION-done ] ; then
echo "Downloading, building, and installing libxml2:"
[ -f libxml2-$LIBXML2_VERSION.tar.gz ] || curl -L -O ftp://xmlsoft.org/libxml2/libxml2-$LIBXML2_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat libxml2-$LIBXML2_VERSION.tar.gz | tar xf - || exit 1
cd libxml2-$LIBXML2_VERSION
#
# At least on macOS 12.0.1 with Xcode 13.1, when we build
# libxml2, the linker complains that we don't have the right
# to link with the Python framework, so don't build with
# Python.
#
CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --without-python || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch libxml2-$LIBXML2_VERSION-done
fi
}
uninstall_libxml2() {
if [ ! -z "$installed_libxml2_version" ] ; then
echo "Uninstalling libxml2:"
cd libxml2-$installed_libxml2_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm libxml2-$installed_libxml2_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf libxml2-$installed_libxml2_version
rm -rf libxml2-$installed_libxml2_version.tar.gz
fi
installed_libxml2_version=""
fi
}
install_lz4() {
if [ "$LZ4_VERSION" -a ! -f lz4-$LZ4_VERSION-done ] ; then
echo "Downloading, building, and installing lz4:"
#
# lz4 switched from sequentially numbered releases, named rN,
# to vX.Y.Z-numbered releases.
#
# The old sequentially-numbered releases were in tarballs
# at https://github.com/lz4/lz4/archive/rN.tar.gz, which
# extract into an lz4-rN directory.
#
# THe new vX.Y.Z-numbered releases are in tarballs at
# https://github.com/lz4/lz4/archive/vX.Y.Z.tar.gz, which
# extract into an lz4-X.Y.Z directory - no, not lz4-vX.Y.Z,
# just lz4-X.Y.Z.
#
# We expect LZ4_VERSION to be set to rN for the sequentially-
# numbered releases and X.Y.Z - not vX.Y.Z - for the vX.Y.Z-
# numbered releases. We also tell Curl to download the tarball
# with a name that corresponds to the name of the target
# directory, so that it begins with "lz4-" and ends with either
# "rN" or "X.Y.Z", to match what almost all of the other
# support libraries do.
#
if [[ "$LZ4_VERSION" == r* ]]
then
[ -f lz4-$LZ4_VERSION.tar.gz ] || curl -L -o lz4-$LZ4_VERSION.tar.gz https://github.com/lz4/lz4/archive/$LZ4_VERSION.tar.gz || exit 1
else
[ -f lz4-$LZ4_VERSION.tar.gz ] || curl -L -o lz4-$LZ4_VERSION.tar.gz https://github.com/lz4/lz4/archive/v$LZ4_VERSION.tar.gz || exit 1
fi
$no_build && echo "Skipping installation" && return
gzcat lz4-$LZ4_VERSION.tar.gz | tar xf - || exit 1
cd lz4-$LZ4_VERSION
#
# No configure script here, but it appears that if MOREFLAGS is
# set, that's added to CFLAGS, and those are combined with LDFLAGS
# and CXXFLAGS into FLAGS, which is used when building source
# files and libraries.
#
MOREFLAGS="-D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch lz4-$LZ4_VERSION-done
fi
}
uninstall_lz4() {
if [ ! -z "$installed_lz4_version" ] ; then
echo "Uninstalling lz4:"
cd lz4-$installed_lz4_version
$DO_MAKE_UNINSTALL || exit 1
#
# lz4's Makefile doesn't support "make distclean"; just do
# "make clean". Perhaps not using autotools means that
# there's no need for "make distclean".
#
# make distclean || exit 1
make clean || exit 1
cd ..
rm lz4-$installed_lz4_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
# "make install" apparently causes some stuff to be
# modified in the build tree, so, as it's done as
# root, that leaves stuff owned by root in the build
# tree. Therefore, we have to remove the build tree
# as root.
#
sudo rm -rf lz4-$installed_lz4_version
rm -rf lz4-$installed_lz4_version.tar.gz
fi
installed_lz4_version=""
fi
}
install_sbc() {
if [ "$SBC_VERSION" -a ! -f sbc-$SBC_VERSION-done ] ; then
echo "Downloading, building, and installing sbc:"
[ -f sbc-$SBC_VERSION.tar.gz ] || curl -L -O https://www.kernel.org/pub/linux/bluetooth/sbc-$SBC_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat sbc-$SBC_VERSION.tar.gz | tar xf - || exit 1
cd sbc-$SBC_VERSION
if [ "$DARWIN_PROCESSOR_ARCH" = "arm" ] ; then
CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS -U__ARM_NEON__" CXXFLAGS="$CXXFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --disable-tools --disable-tester --disable-shared || exit 1
else
CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --disable-tools --disable-tester --disable-shared || exit 1
fi
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch sbc-$SBC_VERSION-done
fi
}
uninstall_sbc() {
if [ ! -z "$installed_sbc_version" ] ; then
echo "Uninstalling sbc:"
cd sbc-$installed_sbc_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm sbc-$installed_sbc_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf sbc-$installed_sbc_version
rm -rf sbc-$installed_sbc_version.tar.gz
fi
installed_sbc_version=""
fi
}
install_maxminddb() {
if [ "$MAXMINDDB_VERSION" -a ! -f maxminddb-$MAXMINDDB_VERSION-done ] ; then
echo "Downloading, building, and installing MaxMindDB API:"
[ -f libmaxminddb-$MAXMINDDB_VERSION.tar.gz ] || curl -L -O https://github.com/maxmind/libmaxminddb/releases/download/$MAXMINDDB_VERSION/libmaxminddb-$MAXMINDDB_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat libmaxminddb-$MAXMINDDB_VERSION.tar.gz | tar xf - || exit 1
cd libmaxminddb-$MAXMINDDB_VERSION
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch maxminddb-$MAXMINDDB_VERSION-done
fi
}
uninstall_maxminddb() {
if [ ! -z "$installed_maxminddb_version" ] ; then
echo "Uninstalling MaxMindDB API:"
cd libmaxminddb-$installed_maxminddb_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm maxminddb-$installed_maxminddb_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf libmaxminddb-$installed_maxminddb_version
rm -rf libmaxminddb-$installed_maxminddb_version.tar.gz
fi
installed_maxminddb_version=""
fi
}
install_c_ares() {
if [ "$CARES_VERSION" -a ! -f c-ares-$CARES_VERSION-done ] ; then
echo "Downloading, building, and installing C-Ares API:"
[ -f c-ares-$CARES_VERSION.tar.gz ] || curl -L -O https://c-ares.org/download/c-ares-$CARES_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat c-ares-$CARES_VERSION.tar.gz | tar xf - || exit 1
cd c-ares-$CARES_VERSION
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch c-ares-$CARES_VERSION-done
fi
}
uninstall_c_ares() {
if [ ! -z "$installed_cares_version" ] ; then
echo "Uninstalling C-Ares API:"
cd c-ares-$installed_cares_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm c-ares-$installed_cares_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf c-ares-$installed_cares_version
rm -rf c-ares-$installed_cares_version.tar.gz
fi
installed_cares_version=""
fi
}
install_libssh() {
if [ "$LIBSSH_VERSION" -a ! -f libssh-$LIBSSH_VERSION-done ] ; then
echo "Downloading, building, and installing libssh:"
LIBSSH_MAJOR_VERSION="`expr $LIBSSH_VERSION : '\([0-9][0-9]*\).*'`"
LIBSSH_MINOR_VERSION="`expr $LIBSSH_VERSION : '[0-9][0-9]*\.\([0-9][0-9]*\).*'`"
LIBSSH_MAJOR_MINOR_VERSION=$LIBSSH_MAJOR_VERSION.$LIBSSH_MINOR_VERSION
[ -f libssh-$LIBSSH_VERSION.tar.xz ] || curl -L -O https://www.libssh.org/files/$LIBSSH_MAJOR_MINOR_VERSION/libssh-$LIBSSH_VERSION.tar.xz
$no_build && echo "Skipping installation" && return
xzcat libssh-$LIBSSH_VERSION.tar.xz | tar xf - || exit 1
cd libssh-$LIBSSH_VERSION
mkdir build
cd build
MACOSX_DEPLOYMENT_TARGET=$min_osx_target SDKROOT="$SDKPATH" cmake -DWITH_GCRYPT=1 ../ || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ../..
touch libssh-$LIBSSH_VERSION-done
fi
}
uninstall_libssh() {
if [ ! -z "$installed_libssh_version" ] ; then
echo "Uninstalling libssh:"
cd libssh-$installed_libssh_version
#
# libssh uses cmake and doesn't support "make uninstall";
# just remove what we know it installs.
#
# $DO_MAKE_UNINSTALL || exit 1
$DO_RM -rf /usr/local/lib/libssh* \
/usr/local/include/libssh \
/usr/local/lib/pkgconfig/libssh* \
/usr/local/lib/cmake/libssh || exit 1
#
# libssh uses cmake and doesn't support "make distclean";
# just remove the entire build directory.
#
# make distclean || exit 1
rm -rf build || exit 1
cd ..
rm libssh-$installed_libssh_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf libssh-$installed_libssh_version
rm -rf libssh-$installed_libssh_version.tar.gz
fi
installed_libssh_version=""
fi
}
install_nghttp2() {
if [ "$NGHTTP2_VERSION" -a ! -f nghttp2-$NGHTTP2_VERSION-done ] ; then
echo "Downloading, building, and installing nghttp2:"
[ -f nghttp2-$NGHTTP2_VERSION.tar.xz ] || curl -L -O https://github.com/nghttp2/nghttp2/releases/download/v$NGHTTP2_VERSION/nghttp2-$NGHTTP2_VERSION.tar.xz || exit 1
$no_build && echo "Skipping installation" && return
xzcat nghttp2-$NGHTTP2_VERSION.tar.xz | tar xf - || exit 1
cd nghttp2-$NGHTTP2_VERSION
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure --enable-lib-only || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch nghttp2-$NGHTTP2_VERSION-done
fi
}
uninstall_nghttp2() {
if [ ! -z "$installed_nghttp2_version" ] ; then
echo "Uninstalling nghttp2:"
cd nghttp2-$installed_nghttp2_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm nghttp2-$installed_nghttp2_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf nghttp2-$installed_nghttp2_version
rm -rf nghttp2-$installed_nghttp2_version.tar.xz
fi
installed_nghttp2_version=""
fi
}
install_libtiff() {
if [ "$LIBTIFF_VERSION" -a ! -f tiff-$LIBTIFF_VERSION-done ] ; then
echo "Downloading, building, and installing libtiff:"
[ -f tiff-$LIBTIFF_VERSION.tar.gz ] ||
curl --fail -L -O https://download.osgeo.org/libtiff/tiff-$LIBTIFF_VERSION.tar.gz ||
curl --fail -L -O https://download.osgeo.org/libtiff/old/tiff-$LIBTIFF_VERSION.tar.gz ||
exit 1
$no_build && echo "Skipping installation" && return
gzcat tiff-$LIBTIFF_VERSION.tar.gz | tar xf - || exit 1
cd tiff-$LIBTIFF_VERSION
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch tiff-$LIBTIFF_VERSION-done
fi
}
uninstall_libtiff() {
if [ ! -z "$installed_libtiff_version" ] ; then
echo "Uninstalling libtiff:"
cd tiff-$installed_libtiff_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm tiff-$installed_libtiff_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf tiff-$installed_libtiff_version
rm -rf tiff-$installed_libtiff_version.tar.gz
fi
installed_libtiff_version=""
fi
}
install_spandsp() {
if [ "$SPANDSP_VERSION" -a ! -f spandsp-$SPANDSP_VERSION-done ] ; then
echo "Downloading, building, and installing SpanDSP:"
[ -f spandsp-$SPANDSP_VERSION.tar.gz ] || curl -L -O https://www.soft-switch.org/downloads/spandsp/spandsp-$SPANDSP_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat spandsp-$SPANDSP_VERSION.tar.gz | tar xf - || exit 1
cd spandsp-$SPANDSP_VERSION
#
# Don't use -Wunused-but-set-variable, as it's not supported
# by all the gcc versions in the versions of Xcode that we
# support.
#
patch -p0 <${topdir}/macosx-support-lib-patches/spandsp-configure-patch || exit 1
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch spandsp-$SPANDSP_VERSION-done
fi
}
uninstall_spandsp() {
if [ ! -z "$installed_spandsp_version" ] ; then
echo "Uninstalling SpanDSP:"
cd spandsp-$installed_spandsp_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm spandsp-$installed_spandsp_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf spandsp-$installed_spandsp_version
rm -rf spandsp-$installed_spandsp_version.tar.gz
fi
installed_spandsp_version=""
fi
}
install_speexdsp() {
if [ "$SPEEXDSP_VERSION" -a ! -f speexdsp-$SPEEXDSP_VERSION-done ] ; then
echo "Downloading, building, and installing SpeexDSP:"
[ -f speexdsp-$SPEEXDSP_VERSION.tar.gz ] || curl -L -O https://ftp.osuosl.org/pub/xiph/releases/speex/speexdsp-$SPEEXDSP_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat speexdsp-$SPEEXDSP_VERSION.tar.gz | tar xf - || exit 1
cd speexdsp-$SPEEXDSP_VERSION
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch speexdsp-$SPEEXDSP_VERSION-done
fi
}
uninstall_speexdsp() {
if [ ! -z "$installed_speexdsp_version" ] ; then
echo "Uninstalling SpeexDSP:"
cd speexdsp-$installed_speexdsp_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm speexdsp-$installed_speexdsp_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf speexdsp-$installed_speexdsp_version
rm -rf speexdsp-$installed_speexdsp_version.tar.gz
fi
installed_speexdsp_version=""
fi
}
install_bcg729() {
if [ "$BCG729_VERSION" -a ! -f bcg729-$BCG729_VERSION-done ] ; then
echo "Downloading, building, and installing bcg729:"
[ -f bcg729-$BCG729_VERSION.tar.gz ] || curl -L -O https://download.savannah.gnu.org/releases/linphone/plugins/sources/bcg729-$BCG729_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat bcg729-$BCG729_VERSION.tar.gz | tar xf - || exit 1
cd bcg729-$BCG729_VERSION
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch bcg729-$BCG729_VERSION-done
fi
}
uninstall_bcg729() {
if [ ! -z "$installed_bcg729_version" ] ; then
echo "Uninstalling bcg729:"
cd bcg729-$installed_bcg729_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm bcg729-$installed_bcg729_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf bcg729-$installed_bcg729_version
rm -rf bcg729-$installed_bcg729_version.tar.gz
fi
installed_bcg729_version=""
fi
}
install_ilbc() {
if [ -n "$ILBC_VERSION" ] && [ ! -f ilbc-$ILBC_VERSION-done ] ; then
echo "Downloading, building, and installing iLBC:"
[ -f libilbc-$ILBC_VERSION.tar.bz ] || curl --location --remote-name https://github.com/TimothyGu/libilbc/releases/download/v$ILBC_VERSION/libilbc-$ILBC_VERSION.tar.bz2 || exit 1
$no_build && echo "Skipping installation" && return
bzcat libilbc-$ILBC_VERSION.tar.bz2 | tar xf - || exit 1
cd libilbc-$ILBC_VERSION || exit 1
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch ilbc-$ILBC_VERSION-done
fi
}
uninstall_ilbc() {
if [ -n "$installed_ilbc_version" ] ; then
echo "Uninstalling iLBC:"
cd "libilbc-$installed_ilbc_version" || exit 1
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm "ilbc-$installed_ilbc_version-done"
if [ "$#" -eq 1 ] && [ "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf "libilbc-$installed_ilbc_version"
rm -rf "libilbc-$installed_ilbc_version.tar.bz2"
fi
installed_ilbc_version=""
fi
}
install_opus() {
if [ "$OPUS_VERSION" -a ! -f opus-$OPUS_VERSION-done ] ; then
echo "Downloading, building, and installing opus:"
[ -f opus-$OPUS_VERSION.tar.gz ] || curl -L -O https://archive.mozilla.org/pub/opus/opus-$OPUS_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat opus-$OPUS_VERSION.tar.gz | tar xf - || exit 1
cd opus-$OPUS_VERSION
CFLAGS="$CFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ..
touch opus-$OPUS_VERSION-done
fi
}
uninstall_opus() {
if [ ! -z "$installed_opus_version" ] ; then
echo "Uninstalling opus:"
cd opus-$installed_opus_version
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ..
rm opus-$installed_opus_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf opus-$installed_opus_version
rm -rf opus-$installed_opus_version.tar.gz
fi
installed_opus_version=""
fi
}
install_python3() {
# The macos11 installer can be deployed to older versions, down to
# 10.9 (Mavericks), but is still considered experimental so continue
# to use the 64-bit installer (10.9) on earlier releases for now.
local macver=x10.9
if [[ $DARWIN_MAJOR_VERSION -gt 19 ]]; then
# The macos11 installer is required for Arm-based Macs, which require
# macOS 11 Big Sur. Note that the package name is "11.0" (no x) for
# 3.9.1 but simply "11" for 3.9.2 (and later)
if [[ $PYTHON3_VERSION = 3.9.1 ]]; then
macver=11.0
else
macver=11
fi
fi
if [ "$PYTHON3_VERSION" -a ! -f python3-$PYTHON3_VERSION-done ] ; then
echo "Downloading and installing python3:"
[ -f python-$PYTHON3_VERSION-macos$macver.pkg ] || curl -L -O https://www.python.org/ftp/python/$PYTHON3_VERSION/python-$PYTHON3_VERSION-macos$macver.pkg || exit 1
$no_build && echo "Skipping installation" && return
sudo installer -target / -pkg python-$PYTHON3_VERSION-macos$macver.pkg || exit 1
touch python3-$PYTHON3_VERSION-done
#
# On macOS, the pip3 installed from Python packages appears to
# install scripts /Library/Frameworks/Python.framework/Versions/M.N/bin,
# where M.N is the major and minor version of Python (the dot-dot
# release is irrelevant).
#
# Strip off any dot-dot component in $PYTHON3_VERSION.
#
python_version=`echo $PYTHON3_VERSION | sed 's/\([1-9][0-9]*\.[1-9][0-9]*\).*/\1/'`
#
# Now treat Meson as being in the directory in question.
#
MESON="/Library/Frameworks/Python.framework/Versions/$python_version/bin/meson"
else
#
# We're using the Python 3 that's in /usr/bin, the pip3 for
# which installs scripts in /usr/local/bin, so, when we
# install Meson, look for it there.
#
MESON=/usr/local/bin/meson
fi
}
uninstall_python3() {
# Major version (e.g. "3.7")
local PYTHON_VERSION=${installed_python3_version%.*}
if [ ! -z "$installed_python3_version" ] ; then
echo "Uninstalling python3:"
frameworkdir="/Library/Frameworks/Python.framework/Versions/$PYTHON_VERSION"
sudo rm -rf "$frameworkdir"
sudo rm -rf "/Applications/Python $PYTHON_VERSION"
sudo find /usr/local/bin -maxdepth 1 -lname "*$frameworkdir/bin/*" -delete
# Remove three symlinks and empty directories. Removing directories
# might fail if for some reason multiple versions are installed.
sudo rm /Library/Frameworks/Python.framework/Headers
sudo rm /Library/Frameworks/Python.framework/Python
sudo rm /Library/Frameworks/Python.framework/Resources
sudo rmdir /Library/Frameworks/Python.framework/Versions
sudo rmdir /Library/Frameworks/Python.framework
sudo pkgutil --forget org.python.Python.PythonApplications-$PYTHON_VERSION
sudo pkgutil --forget org.python.Python.PythonDocumentation-$PYTHON_VERSION
sudo pkgutil --forget org.python.Python.PythonFramework-$PYTHON_VERSION
sudo pkgutil --forget org.python.Python.PythonUnixTools-$PYTHON_VERSION
rm python3-$installed_python3_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -f python-$installed_python3_version-macos11.pkg
rm -f python-$installed_python3_version-macos11.0.pkg
rm -f python-$installed_python3_version-macosx10.9.pkg
rm -f python-$installed_python3_version-macosx10.6.pkg
fi
installed_python3_version=""
fi
}
install_brotli() {
if [ "$BROTLI_VERSION" -a ! -f brotli-$BROTLI_VERSION-done ] ; then
echo "Downloading, building, and installing brotli:"
[ -f brotli-$BROTLI_VERSION.tar.gz ] || curl -L -o brotli-$BROTLI_VERSION.tar.gz https://github.com/google/brotli/archive/v$BROTLI_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat brotli-$BROTLI_VERSION.tar.gz | tar xf - || exit 1
cd brotli-$BROTLI_VERSION
mkdir build_dir
cd build_dir
MACOSX_DEPLOYMENT_TARGET=$min_osx_target SDKROOT="$SDKPATH" cmake ../ || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ../..
touch brotli-$BROTLI_VERSION-done
fi
}
uninstall_brotli() {
if [ ! -z "$installed_brotli_version" ] ; then
echo "Uninstalling brotli:"
cd brotli-$installed_brotli_version
#
# brotli uses cmake on macOS and doesn't support "make uninstall";
# just remove what we know it installs.
#
# $DO_MAKE_UNINSTALL || exit 1
$DO_RM -rf /usr/local/bin/brotli \
/usr/local/lib/libbrotli* \
/usr/local/include/brotli \
/usr/local/lib/pkgconfig/libbrotli* || exit 1
#
# brotli uses cmake on macOS and doesn't support "make distclean";
# just remove the enire build directory.
#
# make distclean || exit 1
rm -rf build_dir || exit 1
cd ..
rm brotli-$installed_brotli_version-done
if [ "$#" -eq 1 -a "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf brotli-$installed_brotli_version
rm -rf brotli-$installed_brotli_version.tar.gz
fi
installed_brotli_version=""
fi
}
install_minizip() {
if [ "$ZLIB_VERSION" ] && [ ! -f minizip-$ZLIB_VERSION-done ] ; then
echo "Downloading, building, and installing zlib for minizip:"
[ -f zlib-$ZLIB_VERSION.tar.gz ] || curl -L -o zlib-$ZLIB_VERSION.tar.gz https://zlib.net/zlib-$ZLIB_VERSION.tar.gz || exit 1
$no_build && echo "Skipping installation" && return
gzcat zlib-$ZLIB_VERSION.tar.gz | tar xf - || exit 1
#
# minizip ships both with a minimal Makefile that doesn't
# support "make install", "make uninstall", or "make distclean",
# and with a Makefile.am file that, if we do an autoreconf,
# gives us a configure script, and a Makefile.in that, if we run
# the configure script, gives us a Makefile that supports ll of
# those targets, and that installs a pkg-config .pc file for
# minizip.
#
# So that's what we do.
#
cd zlib-$ZLIB_VERSION/contrib/minizip || exit 1
LIBTOOLIZE=glibtoolize autoreconf --force --install
CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" CXXFLAGS="$CXXFLAGS -D_FORTIFY_SOURCE=0 $VERSION_MIN_FLAGS $SDKFLAGS" LDFLAGS="$LDFLAGS $VERSION_MIN_FLAGS $SDKFLAGS" ./configure || exit 1
make $MAKE_BUILD_OPTS || exit 1
$DO_MAKE_INSTALL || exit 1
cd ../../..
touch minizip-$ZLIB_VERSION-done
fi
}
uninstall_minizip() {
if [ -n "$installed_minizip_version" ] ; then
echo "Uninstalling minizip:"
cd zlib-$installed_minizip_version/contrib/minizip
$DO_MAKE_UNINSTALL || exit 1
make distclean || exit 1
cd ../../..
rm minizip-$installed_minizip_version-done
if [ "$#" -eq 1 ] && [ "$1" = "-r" ] ; then
#
# Get rid of the previously downloaded and unpacked version.
#
rm -rf zlib-$installed_minizip_version
rm -rf zlib-$installed_minizip_version.tar.gz
fi
installed_minizip_version=""
fi
}
install_sparkle() {
if [ "$SPARKLE_VERSION" ] && [ ! -f sparkle-$SPARKLE_VERSION-done ] ; then
echo "Downloading and installing Sparkle:"
#
# Download the tarball and unpack it in /usr/local/Sparkle-x.y.z
#
[ -f Sparkle-$SPARKLE_VERSION.tar.xz ] || curl -L -o Sparkle-$SPARKLE_VERSION.tar.xz https://github.com/sparkle-project/Sparkle/releases/download/$SPARKLE_VERSION/Sparkle-$SPARKLE_VERSION.tar.xz || exit 1
$no_build && echo "Skipping installation" && return
test -d "/usr/local/Sparkle-$SPARKLE_VERSION" || sudo mkdir "/usr/local/Sparkle-$SPARKLE_VERSION"
sudo tar -C "/usr/local/Sparkle-$SPARKLE_VERSION" -xpof Sparkle-$SPARKLE_VERSION.tar.xz
touch sparkle-$SPARKLE_VERSION-done
fi
}
uninstall_sparkle() {
if [ -n "$installed_sparkle_version" ]; then
echo "Uninstalling Sparkle:"
sudo rm -rf "/usr/local/Sparkle-$installed_sparkle_version"
if [ "$#" -eq 1 ] && [ "$1" = "-r" ] ; then
rm -f "Sparkle-$installed_sparkle_version.tar.xz"
fi
installed_sparkle_version=""
fi
}
install_all() {
#
# Check whether the versions we have installed are the versions
# requested; if not, uninstall the installed versions.
#
if [ ! -z "$installed_brotli_version" -a \
"$installed_brotli_version" != "$BROTLI_VERSION" ] ; then
echo "Installed brotli version is $installed_brotli_version"
if [ -z "$BROTLI_VERSION" ] ; then
echo "brotli is not requested"
else
echo "Requested brotli version is $BROTLI_VERSION"
fi
uninstall_brotli -r
fi
if [ ! -z "$installed_python3_version" -a \
"$installed_python3_version" != "$PYTHON3_VERSION" ] ; then
echo "Installed python3 version is $installed_python3_version"
if [ -z "$PYTHON3_VERSION" ] ; then
echo "python3 is not requested"
else
echo "Requested python3 version is $PYTHON3_VERSION"
fi
uninstall_python3 -r
fi
if [ ! -z "$installed_bcg729_version" -a \
"$installed_bcg729_version" != "$BCG729_VERSION" ] ; then
echo "Installed bcg729 version is $installed_bcg729_version"
if [ -z "$BCG729_VERSION" ] ; then
echo "bcg729 is not requested"
else
echo "Requested bcg729 version is $BCG729_VERSION"
fi
uninstall_bcg729 -r
fi
if [ -n "$installed_ilbc_version" ] \
&& [ "$installed_ilbc_version" != "$ILBC_VERSION" ] ; then
echo "Installed iLBC version is $installed_ilbc_version"
if [ -z "$ILBC_VERSION" ] ; then
echo "iLBC is not requested"
else
echo "Requested iLBC version is $ILBC_VERSION"
fi
uninstall_ilbc -r
fi
if [ -n "$installed_opus_version" ] \
&& [ "$installed_opus_version" != "$OPUS_VERSION" ] ; then
echo "Installed opus version is $installed_opus_version"
if [ -z "$OPUS_VERSION" ] ; then
echo "opus is not requested"
else
echo "Requested opus version is $OPUS_VERSION"
fi
uninstall_opus -r
fi
if [ ! -z "$installed_spandsp_version" -a \
"$installed_spandsp_version" != "$SPANDSP_VERSION" ] ; then
echo "Installed SpanDSP version is $installed_spandsp_version"
if [ -z "$SPANDSP_VERSION" ] ; then
echo "spandsp is not requested"
else
echo "Requested SpanDSP version is $SPANDSP_VERSION"
fi
uninstall_spandsp -r
fi
if [ ! -z "$installed_speexdsp_version" -a \
"$installed_speexdsp_version" != "$SPEEXDSP_VERSION" ] ; then
echo "Installed SpeexDSP version is $installed_speexdsp_version"
if [ -z "$SPEEXDSP_VERSION" ] ; then
echo "speexdsp is not requested"
else
echo "Requested SpeexDSP version is $SPEEXDSP_VERSION"
fi
uninstall_speexdsp -r
fi
if [ ! -z "$installed_libtiff_version" -a \
"$installed_libtiff_version" != "$LIBTIFF_VERSION" ] ; then
echo "Installed libtiff version is $installed_libtiff_version"
if [ -z "$LIBTIFF_VERSION" ] ; then
echo "libtiff is not requested"
else
echo "Requested libtiff version is $LIBTIFF_VERSION"
fi
uninstall_libtiff -r
fi
if [ ! -z "$installed_nghttp2_version" -a \
"$installed_nghttp2_version" != "$NGHTTP2_VERSION" ] ; then
echo "Installed nghttp2 version is $installed_nghttp2_version"
if [ -z "$NGHTTP2_VERSION" ] ; then
echo "nghttp2 is not requested"
else
echo "Requested nghttp2 version is $NGHTTP2_VERSION"
fi
uninstall_nghttp2 -r
fi
if [ ! -z "$installed_libssh_version" -a \
"$installed_libssh_version" != "$LIBSSH_VERSION" ] ; then
echo "Installed libssh version is $installed_libssh_version"
if [ -z "$LIBSSH_VERSION" ] ; then
echo "libssh is not requested"
else
echo "Requested libssh version is $LIBSSH_VERSION"
fi
uninstall_libssh -r
fi
if [ ! -z "$installed_cares_version" -a \
"$installed_cares_version" != "$CARES_VERSION" ] ; then
echo "Installed C-Ares version is $installed_cares_version"
if [ -z "$CARES_VERSION" ] ; then
echo "C-Ares is not requested"
else
echo "Requested C-Ares version is $CARES_VERSION"
fi
uninstall_c_ares -r
fi
if [ ! -z "$installed_maxminddb_version" -a \
"$installed_maxminddb_version" != "$MAXMINDDB_VERSION" ] ; then
echo "Installed MaxMindDB API version is $installed_maxminddb_version"
if [ -z "$MAXMINDDB_VERSION" ] ; then
echo "MaxMindDB is not requested"
else
echo "Requested MaxMindDB version is $MAXMINDDB_VERSION"
fi
uninstall_maxminddb -r
fi
if [ ! -z "$installed_sbc_version" -a \
"$installed_sbc_version" != "$SBC_VERSION" ] ; then
echo "Installed SBC version is $installed_sbc_version"
if [ -z "$SBC_VERSION" ] ; then
echo "SBC is not requested"
else
echo "Requested SBC version is $SBC_VERSION"
fi
uninstall_sbc -r
fi
if [ ! -z "$installed_lz4_version" -a \
"$installed_lz4_version" != "$LZ4_VERSION" ] ; then
echo "Installed LZ4 version is $installed_lz4_version"
if [ -z "$LZ4_VERSION" ] ; then
echo "LZ4 is not requested"
else
echo "Requested LZ4 version is $LZ4_VERSION"
fi
uninstall_lz4 -r
fi
if [ ! -z "$installed_libxml2_version" -a \
"$installed_libxml2_version" != "$LIBXML2_VERSION" ] ; then
echo "Installed libxml2 version is $installed_libxml2_version"
if [ -z "$LIBXML2_VERSION" ] ; then
echo "libxml2 is not requested"
else
echo "Requested libxml2 version is $LIBXML2_VERSION"
fi
uninstall_libxml2 -r
fi
if [ ! -z "$installed_snappy_version" -a \
"$installed_snappy_version" != "$SNAPPY_VERSION" ] ; then
echo "Installed SNAPPY version is $installed_snappy_version"
if [ -z "$SNAPPY_VERSION" ] ; then
echo "SNAPPY is not requested"
else
echo "Requested SNAPPY version is $SNAPPY_VERSION"
fi
uninstall_snappy -r
fi
if [ ! -z "$installed_lua_version" -a \
"$installed_lua_version" != "$LUA_VERSION" ] ; then
echo "Installed Lua version is $installed_lua_version"
if [ -z "$LUA_VERSION" ] ; then
echo "Lua is not requested"
else
echo "Requested Lua version is $LUA_VERSION"
fi
uninstall_lua -r
fi
if [ ! -z "$installed_gnutls_version" -a \
"$installed_gnutls_version" != "$GNUTLS_VERSION" ] ; then
echo "Installed GnuTLS version is $installed_gnutls_version"
if [ -z "$GNUTLS_VERSION" ] ; then
echo "GnuTLS is not requested"
else
echo "Requested GnuTLS version is $GNUTLS_VERSION"
fi
uninstall_gnutls -r
fi
if [ ! -z "$installed_nettle_version" -a \
"$installed_nettle_version" != "$NETTLE_VERSION" ] ; then
echo "Installed Nettle version is $installed_nettle_version"
if [ -z "$NETTLE_VERSION" ] ; then
echo "Nettle is not requested"
else
echo "Requested Nettle version is $NETTLE_VERSION"
fi
uninstall_nettle -r
fi
if [ ! -z "$installed_gmp_version" -a \
"$installed_gmp_version" != "$GMP_VERSION" ] ; then
echo "Installed GMP version is $installed_gmp_version"
if [ -z "$GMP_VERSION" ] ; then
echo "GMP is not requested"
else
echo "Requested GMP version is $GMP_VERSION"
fi
uninstall_gmp -r
fi
if [ ! -z "$installed_p11_kit_version" -a \
"$installed_p11_kit_version" != "$P11KIT_VERSION" ] ; then
echo "Installed p11-kit version is $installed_p11_kit_version"
if [ -z "$P11KIT_VERSION" ] ; then
echo "p11-kit is not requested"
else
echo "Requested p11-kit version is $P11KIT_VERSION"
fi
uninstall_p11_kit -r
fi
if [ ! -z "$installed_libtasn1_version" -a \
"$installed_libtasn1_version" != "$LIBTASN1_VERSION" ] ; then
echo "Installed libtasn1 version is $installed_libtasn1_version"
if [ -z "$LIBTASN1_VERSION" ] ; then
echo "libtasn1 is not requested"
else
echo "Requested libtasn1 version is $LIBTASN1_VERSION"
fi
uninstall_libtasn1 -r
fi
if [ ! -z "$installed_libgcrypt_version" -a \
"$installed_libgcrypt_version" != "$LIBGCRYPT_VERSION" ] ; then
echo "Installed libgcrypt version is $installed_libgcrypt_version"
if [ -z "$LIBGCRYPT_VERSION" ] ; then
echo "libgcrypt is not requested"
else
echo "Requested libgcrypt version is $LIBGCRYPT_VERSION"
fi
uninstall_libgcrypt -r
fi
if [ ! -z "$installed_libgpg_error_version" -a \
"$installed_libgpg_error_version" != "$LIBGPG_ERROR_VERSION" ] ; then
echo "Installed libgpg-error version is $installed_libgpg_error_version"
if [ -z "$LIBGPG_ERROR_VERSION" ] ; then
echo "libgpg-error is not requested"
else
echo "Requested libgpg-error version is $LIBGPG_ERROR_VERSION"
fi
uninstall_libgpg_error -r
fi
if [ ! -z "$installed_libsmi_version" -a \
"$installed_libsmi_version" != "$LIBSMI_VERSION" ] ; then
echo "Installed libsmi version is $installed_libsmi_version"
if [ -z "$LIBSMI_VERSION" ] ; then
echo "libsmi is not requested"
else
echo "Requested libsmi version is $LIBSMI_VERSION"
fi
uninstall_libsmi -r
fi
if [ ! -z "$installed_qt_version" -a \
"$installed_qt_version" != "$QT_VERSION" ] ; then
echo "Installed Qt version is $installed_qt_version"
if [ -z "$QT_VERSION" ] ; then
echo "Qt is not requested"
else
echo "Requested Qt version is $QT_VERSION"
fi
uninstall_qt -r
fi
if [ ! -z "$installed_glib_version" -a \
"$installed_glib_version" != "$GLIB_VERSION" ] ; then
echo "Installed GLib version is $installed_glib_version"
if [ -z "$GLIB_VERSION" ] ; then
echo "GLib is not requested"
else
echo "Requested GLib version is $GLIB_VERSION"
fi
uninstall_glib -r
fi
if [ ! -z "$installed_pkg_config_version" -a \
"$installed_pkg_config_version" != "$PKG_CONFIG_VERSION" ] ; then
echo "Installed pkg-config version is $installed_pkg_config_version"
if [ -z "$PKG_CONFIG_VERSION" ] ; then
echo "pkg-config is not requested"
else
echo "Requested pkg-config version is $PKG_CONFIG_VERSION"
fi
uninstall_pkg_config -r
fi
if [ ! -z "$installed_gettext_version" -a \
"$installed_gettext_version" != "$GETTEXT_VERSION" ] ; then
echo "Installed GNU gettext version is $installed_gettext_version"
if [ -z "$GETTEXT_VERSION" ] ; then
echo "GNU gettext is not requested"
else
echo "Requested GNU gettext version is $GETTEXT_VERSION"
fi
uninstall_gettext -r
fi
if [ ! -z "$installed_ninja_version" -a \
"$installed_ninja_version" != "$NINJA_VERSION" ] ; then
echo "Installed Ninja version is $installed_ninja_version"
if [ -z "$NINJA_VERSION" ] ; then
echo "Ninja is not requested"
else
echo "Requested Ninja version is $NINJA_VERSION"
fi
uninstall_ninja -r
fi
if [ ! -z "$installed_asciidoctorpdf_version" -a \
"$installed_asciidoctorpdf_version" != "$ASCIIDOCTORPDF_VERSION" ] ; then
echo "Installed Asciidoctor-pdf version is $installed_asciidoctorpdf_version"
if [ -z "$ASCIIDOCTORPDF_VERSION" ] ; then
echo "Asciidoctor-pdf is not requested"
else
echo "Requested Asciidoctor-pdf version is $ASCIIDOCTORPDF_VERSION"
fi
# XXX - really remove this?
# Or should we remember it as installed only if this script
# installed it?
#
uninstall_asciidoctorpdf -r
fi
if [ ! -z "$installed_asciidoctor_version" -a \
"$installed_asciidoctor_version" != "$ASCIIDOCTOR_VERSION" ] ; then
echo "Installed Asciidoctor version is $installed_asciidoctor_version"
if [ -z "$ASCIIDOCTOR_VERSION" ] ; then
echo "Asciidoctor is not requested"
else
echo "Requested Asciidoctor version is $ASCIIDOCTOR_VERSION"
fi
# XXX - really remove this?
# Or should we remember it as installed only if this script
# installed it?
#
uninstall_asciidoctor -r
fi
if [ ! -z "$installed_cmake_version" -a \
"$installed_cmake_version" != "$CMAKE_VERSION" ] ; then
echo "Installed CMake version is $installed_cmake_version"
if [ -z "$CMAKE_VERSION" ] ; then
echo "CMake is not requested"
else
echo "Requested CMake version is $CMAKE_VERSION"
fi
uninstall_cmake -r
fi
if [ ! -z "$installed_libtool_version" -a \
"$installed_libtool_version" != "$LIBTOOL_VERSION" ] ; then
echo "Installed GNU libtool version is $installed_libtool_version"
if [ -z "$LIBTOOL_VERSION" ] ; then
echo "GNU libtool is not requested"
else
echo "Requested GNU libtool version is $LIBTOOL_VERSION"
fi
uninstall_libtool -r
fi
if [ ! -z "$installed_automake_version" -a \
"$installed_automake_version" != "$AUTOMAKE_VERSION" ] ; then
echo "Installed GNU automake version is $installed_automake_version"
if [ -z "$AUTOMAKE_VERSION" ] ; then
echo "GNU automake is not requested"
else
echo "Requested GNU automake version is $AUTOMAKE_VERSION"
fi
uninstall_automake -r
fi
if [ ! -z "$installed_autoconf_version" -a \
"$installed_autoconf_version" != "$AUTOCONF_VERSION" ] ; then
echo "Installed GNU autoconf version is $installed_autoconf_version"
if [ -z "$AUTOCONF_VERSION" ] ; then
echo "GNU autoconf is not requested"
else
echo "Requested GNU autoconf version is $AUTOCONF_VERSION"
fi
uninstall_autoconf -r
fi
if [ ! -z "$installed_pcre_version" -a \
"$installed_pcre_version" != "$PCRE_VERSION" ] ; then
echo "Installed pcre version is $installed_pcre_version"
if [ -z "$PCRE_VERSION" ] ; then
echo "pcre is not requested"
else
echo "Requested pcre version is $PCRE_VERSION"
fi
uninstall_pcre -r
fi
if [ -n "$installed_pcre2_version" -a \
"$installed_pcre2_version" != "$PCRE2_VERSION" ] ; then
echo "Installed pcre2 version is $installed_pcre2_version"
if [ -z "$PCRE2_VERSION" ] ; then
echo "pcre2 is not requested"
else
echo "Requested pcre2 version is $PCRE2_VERSION"
fi
uninstall_pcre2 -r
fi
if [ ! -z "$installed_lzip_version" -a \
"$installed_lzip_version" != "$LZIP_VERSION" ] ; then
echo "Installed lzip version is $installed_lzip_version"
if [ -z "$LZIP_VERSION" ] ; then
echo "lzip is not requested"
else
echo "Requested lzip version is $LZIP_VERSION"
fi
uninstall_lzip -r
fi
if [ ! -z "$installed_xz_version" -a \
"$installed_xz_version" != "$XZ_VERSION" ] ; then
echo "Installed xz version is $installed_xz_version"
if [ -z "$XZ_VERSION" ] ; then
echo "xz is not requested"
else
echo "Requested xz version is $XZ_VERSION"
fi
uninstall_xz -r
fi
if [ ! -z "$installed_curl_version" -a \
"$installed_curl_version" != "$CURL_VERSION" ] ; then
echo "Installed curl version is $installed_curl_version"
if [ -z "$CURL_VERSION" ] ; then
echo "curl is not requested"
else
echo "Requested curl version is $CURL_VERSION"
fi
uninstall_curl -r
fi
if [ ! -z "$installed_minizip_version" -a \
"$installed_minizip_version" != "$ZLIB_VERSION" ] ; then
echo "Installed minizip (zlib) version is $installed_minizip_version"
if [ -z "$ZLIB_VERSION" ] ; then
echo "minizip is not requested"
else
echo "Requested minizip (zlib) version is $ZLIB_VERSION"
fi
uninstall_minizip -r
fi
if [ ! -z "$installed_sparkle_version" -a \
"$installed_sparkle_version" != "$SPARKLE_VERSION" ] ; then
echo "Installed Sparkle version is $installed_sparkle_version"
if [ -z "$SPARKLE_VERSION" ] ; then
echo "Sparkle is not requested"
else
echo "Requested Sparkle version is $SPARKLE_VERSION"
fi
uninstall_sparkle -r
fi
#
# Start with curl: we may need it to download and install xz.
#
install_curl
#
# Now intall xz: it is the sole download format of glib later than 2.31.2.
#
install_xz
install_lzip
install_pcre
install_autoconf
install_automake
install_libtool
install_cmake
install_pcre2
#
# Install Python 3 now; not only is it needed for the Wireshark
# build process, it's also needed for the Meson build system,
# which newer versions of GLib use as their build system.
#
install_python3
#
# Now install Meson.
#
install_meson
install_ninja
install_asciidoctor
install_asciidoctorpdf
#
# Start with GNU gettext; GLib requires it, and macOS doesn't have it
# or a BSD-licensed replacement.
#
# At least on Lion with Xcode 4, _FORTIFY_SOURCE gets defined as 2
# by default, which causes, for example, stpncpy to be defined as
# a hairy macro that collides with the GNU gettext configure script's
# attempts to workaround AIX's lack of a declaration for stpncpy,
# with the result being a huge train wreck. Define _FORTIFY_SOURCE
# as 0 in an attempt to keep the trains on separate tracks.
#
install_gettext
#
# GLib depends on pkg-config.
# By default, pkg-config depends on GLib; we break the dependency cycle
# by configuring pkg-config to use its own internal version of GLib.
#
install_pkg_config
install_glib
#
# Now we have reached a point where we can build everything but
# the GUI (Wireshark).
#
install_qt
#
# Now we have reached a point where we can build everything including
# the GUI (Wireshark), but not with any optional features such as
# SNMP OID resolution, some forms of decryption, Lua scripting, playback
# of audio, or MaxMindDB mapping of IP addresses.
#
# We now conditionally download optional libraries to support them;
# the default is to download them all.
#
install_libsmi
install_libgpg_error
install_libgcrypt
install_gmp
install_libtasn1
install_p11_kit
install_nettle
install_gnutls
install_lua
install_snappy
install_zstd
install_libxml2
install_lz4
install_sbc
install_maxminddb
install_c_ares
install_libssh
install_nghttp2
install_libtiff
install_spandsp
install_speexdsp
install_bcg729
install_ilbc
install_opus
install_brotli
install_minizip
install_sparkle
}
uninstall_all() {
if [ -d "${MACOSX_SUPPORT_LIBS}" ]
then
cd "${MACOSX_SUPPORT_LIBS}"
#
# Uninstall items in the reverse order from the order in which they're
# installed. Only uninstall if the download/build/install process
# completed; uninstall the version that appears in the name of
# the -done file.
#
# We also do a "make distclean", so that we don't have leftovers from
# old configurations.
#
uninstall_sparkle
uninstall_minizip
uninstall_brotli
uninstall_opus
uninstall_ilbc
uninstall_bcg729
uninstall_speexdsp
uninstall_spandsp
uninstall_libtiff
uninstall_nghttp2
uninstall_libssh
uninstall_c_ares
uninstall_maxminddb
uninstall_snappy
uninstall_zstd
uninstall_libxml2
uninstall_lz4
uninstall_sbc
uninstall_lua
uninstall_gnutls
uninstall_nettle
uninstall_p11_kit
uninstall_libtasn1
uninstall_gmp
uninstall_libgcrypt
uninstall_libgpg_error
uninstall_libsmi
uninstall_qt
uninstall_glib
uninstall_pkg_config
uninstall_gettext
uninstall_ninja
#
# XXX - really remove this?
# Or should we remember it as installed only if this script
# installed it?
#
uninstall_asciidoctorpdf
uninstall_asciidoctor
uninstall_meson
uninstall_python3
uninstall_cmake
uninstall_libtool
uninstall_automake
uninstall_autoconf
uninstall_pcre
uninstall_lzip
uninstall_xz
uninstall_curl
fi
}
#
# Do we have permission to write in /usr/local?
#
# If so, assume we have permission to write in its subdirectories.
# (If that's not the case, this test needs to check the subdirectories
# as well.)
#
# If not, do "make install", "make uninstall", "ninja install",
# "ninja uninstall", the removes for dependencies that don't support
# "make uninstall" or "ninja uninstall", the renames of [g]libtool*,
# and the writing of a libffi .pc file with sudo.
#
if [ -w /usr/local ]
then
DO_MAKE_INSTALL="make install"
DO_MAKE_UNINSTALL="make uninstall"
DO_NINJA_INSTALL="ninja -C _build install"
DO_NINJA_UNINSTALL="ninja -C _build uninstall"
DO_TEE_TO_PC_FILE="tee"
DO_RM="rm"
DO_MV="mv"
else
DO_MAKE_INSTALL="sudo make install"
DO_MAKE_UNINSTALL="sudo make uninstall"
DO_NINJA_INSTALL="sudo ninja -C _build install"
DO_NINJA_UNINSTALL="sudo ninja -C _build uninstall"
DO_TEE_TO_PC_FILE="sudo tee"
DO_RM="sudo rm"
DO_MV="sudo mv"
fi
# This script is meant to be run in the source root. The following
# code will attempt to get you there, but is not perfect (particulary
# if someone copies the script).
topdir=`pwd`/`dirname $0`/..
cd $topdir
# Preference of the support libraries directory:
# ${MACOSX_SUPPORT_LIBS}
# ../macosx-support-libs
# ./macosx-support-libs (default if none exists)
if [ ! -d "${MACOSX_SUPPORT_LIBS}" ]; then
unset MACOSX_SUPPORT_LIBS
fi
if [ -d ../macosx-support-libs ]; then
MACOSX_SUPPORT_LIBS=${MACOSX_SUPPORT_LIBS-../macosx-support-libs}
else
MACOSX_SUPPORT_LIBS=${MACOSX_SUPPORT_LIBS-./macosx-support-libs}
fi
#
# If we have SDKs available, the default target OS is the major version
# of the one we're running; get that and strip off the third component
# if present.
#
for i in /Developer/SDKs \
/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs \
/Library/Developer/CommandLineTools/SDKs
do
if [ -d "$i" ]
then
min_osx_target=`sw_vers -productVersion | sed 's/\([0-9]*\)\.\([0-9]*\)\.[0-9]*/\1.\2/'`
break
fi
done
#
# Parse command-line flags:
#
# -h - print help.
# -t <target> - build libraries so that they'll work on the specified
# version of macOS and later versions.
# -u - do an uninstall.
# -n - download all packages, but don't build or install.
#
no_build=false
while getopts ht:un name
do
case $name in
u)
do_uninstall=yes
;;
n)
no_build=true
;;
t)
min_osx_target="$OPTARG"
;;
h|?)
echo "Usage: macos-setup.sh [ -t <target> ] [ -u ] [ -n ]" 1>&1
exit 0
;;
esac
done
#
# Get the version numbers of installed packages, if any.
#
if [ -d "${MACOSX_SUPPORT_LIBS}" ]
then
cd "${MACOSX_SUPPORT_LIBS}"
installed_xz_version=`ls xz-*-done 2>/dev/null | sed 's/xz-\(.*\)-done/\1/'`
installed_lzip_version=`ls lzip-*-done 2>/dev/null | sed 's/lzip-\(.*\)-done/\1/'`
installed_pcre_version=`ls pcre-*-done 2>/dev/null | sed 's/pcre-\(.*\)-done/\1/'`
installed_pcre2_version=$(ls pcre2-*-done 2>/dev/null | sed 's/pcre2-\(.*\)-done/\1/')
installed_autoconf_version=`ls autoconf-*-done 2>/dev/null | sed 's/autoconf-\(.*\)-done/\1/'`
installed_automake_version=`ls automake-*-done 2>/dev/null | sed 's/automake-\(.*\)-done/\1/'`
installed_libtool_version=`ls libtool-*-done 2>/dev/null | sed 's/libtool-\(.*\)-done/\1/'`
installed_cmake_version=`ls cmake-*-done 2>/dev/null | sed 's/cmake-\(.*\)-done/\1/'`
installed_ninja_version=`ls ninja-*-done 2>/dev/null | sed 's/ninja-\(.*\)-done/\1/'`
installed_asciidoctor_version=`ls asciidoctor-*-done 2>/dev/null | sed 's/asciidoctor-\(.*\)-done/\1/'`
installed_asciidoctorpdf_version=`ls asciidoctorpdf-*-done 2>/dev/null | sed 's/asciidoctorpdf-\(.*\)-done/\1/'`
installed_gettext_version=`ls gettext-*-done 2>/dev/null | sed 's/gettext-\(.*\)-done/\1/'`
installed_pkg_config_version=`ls pkg-config-*-done 2>/dev/null | sed 's/pkg-config-\(.*\)-done/\1/'`
installed_glib_version=`ls glib-*-done 2>/dev/null | sed 's/glib-\(.*\)-done/\1/'`
installed_qt_version=`ls qt-*-done 2>/dev/null | sed 's/qt-\(.*\)-done/\1/'`
installed_libsmi_version=`ls libsmi-*-done 2>/dev/null | sed 's/libsmi-\(.*\)-done/\1/'`
installed_libgpg_error_version=`ls libgpg-error-*-done 2>/dev/null | sed 's/libgpg-error-\(.*\)-done/\1/'`
installed_libgcrypt_version=`ls libgcrypt-*-done 2>/dev/null | sed 's/libgcrypt-\(.*\)-done/\1/'`
installed_gmp_version=`ls gmp-*-done 2>/dev/null | sed 's/gmp-\(.*\)-done/\1/'`
installed_libtasn1_version=`ls libtasn1-*-done 2>/dev/null | sed 's/libtasn1-\(.*\)-done/\1/'`
installed_p11_kit_version=`ls p11-kit-*-done 2>/dev/null | sed 's/p11-kit-\(.*\)-done/\1/'`
installed_nettle_version=`ls nettle-*-done 2>/dev/null | sed 's/nettle-\(.*\)-done/\1/'`
installed_gnutls_version=`ls gnutls-*-done 2>/dev/null | sed 's/gnutls-\(.*\)-done/\1/'`
installed_lua_version=`ls lua-*-done 2>/dev/null | sed 's/lua-\(.*\)-done/\1/'`
installed_snappy_version=`ls snappy-*-done 2>/dev/null | sed 's/snappy-\(.*\)-done/\1/'`
installed_zstd_version=`ls zstd-*-done 2>/dev/null | sed 's/zstd-\(.*\)-done/\1/'`
installed_libxml2_version=`ls libxml2-*-done 2>/dev/null | sed 's/libxml2-\(.*\)-done/\1/'`
installed_lz4_version=`ls lz4-*-done 2>/dev/null | sed 's/lz4-\(.*\)-done/\1/'`
installed_sbc_version=`ls sbc-*-done 2>/dev/null | sed 's/sbc-\(.*\)-done/\1/'`
installed_maxminddb_version=`ls maxminddb-*-done 2>/dev/null | sed 's/maxminddb-\(.*\)-done/\1/'`
installed_cares_version=`ls c-ares-*-done 2>/dev/null | sed 's/c-ares-\(.*\)-done/\1/'`
installed_libssh_version=`ls libssh-*-done 2>/dev/null | sed 's/libssh-\(.*\)-done/\1/'`
installed_nghttp2_version=`ls nghttp2-*-done 2>/dev/null | sed 's/nghttp2-\(.*\)-done/\1/'`
installed_libtiff_version=`ls tiff-*-done 2>/dev/null | sed 's/tiff-\(.*\)-done/\1/'`
installed_spandsp_version=`ls spandsp-*-done 2>/dev/null | sed 's/spandsp-\(.*\)-done/\1/'`
installed_speexdsp_version=`ls speexdsp-*-done 2>/dev/null | sed 's/speexdsp-\(.*\)-done/\1/'`
installed_bcg729_version=`ls bcg729-*-done 2>/dev/null | sed 's/bcg729-\(.*\)-done/\1/'`
installed_ilbc_version=`ls ilbc-*-done 2>/dev/null | sed 's/ilbc-\(.*\)-done/\1/'`
installed_opus_version=`ls opus-*-done 2>/dev/null | sed 's/opus-\(.*\)-done/\1/'`
installed_python3_version=`ls python3-*-done 2>/dev/null | sed 's/python3-\(.*\)-done/\1/'`
installed_brotli_version=`ls brotli-*-done 2>/dev/null | sed 's/brotli-\(.*\)-done/\1/'`
installed_minizip_version=`ls minizip-*-done 2>/dev/null | sed 's/minizip-\(.*\)-done/\1/'`
installed_sparkle_version=`ls sparkle-*-done 2>/dev/null | sed 's/sparkle-\(.*\)-done/\1/'`
cd $topdir
fi
if [ "$do_uninstall" = "yes" ]
then
uninstall_all
exit 0
fi
#
# Configure scripts tend to set CFLAGS and CXXFLAGS to "-g -O2" if
# invoked without CFLAGS or CXXFLAGS being set in the environment.
#
# However, we *are* setting them in the environment, for our own
# nefarious purposes, so start them out as "-g -O2".
#
CFLAGS="-g -O2"
CXXFLAGS="-g -O2"
# if no make options are present, set default options
if [ -z "$MAKE_BUILD_OPTS" ] ; then
# by default use 1.5x number of cores for parallel build
MAKE_BUILD_OPTS="-j $(( $(sysctl -n hw.logicalcpu) * 3 / 2))"
fi
#
# If we have a target release, look for the oldest SDK that's for an
# OS equal to or later than that one, and build libraries against it
# rather than against the headers and, more importantly, libraries
# that come with the OS, so that we don't end up with support libraries
# that only work on the OS version on which we built them, not earlier
# versions of the same release, or earlier releases if the minimum is
# earlier.
#
if [ ! -z "$min_osx_target" ]
then
#
# Get the major and minor version of the target release.
# We assume it'll be a while before there's a macOS 100. :-)
#
case "$min_osx_target" in
[1-9][0-9].*)
#
# major.minor.
#
min_osx_target_major=`echo "$min_osx_target" | sed -n 's/\([1-9][0-9]*\)\..*/\1/p'`
min_osx_target_minor=`echo "$min_osx_target" | sed -n 's/[1-9][0-9]*\.\(.*\)/\1/p'`
;;
[1-9][0-9])
#
# Just a major version number was specified; make the minor
# version 0.
#
min_osx_target_major="$min_osx_target"
min_osx_target_minor=0
;;
*)
echo "macosx-setup.sh: Invalid target release $min_osx_target" 1>&2
exit 1
;;
esac
#
# Search each directory that might contain SDKs.
#
sdkpath=""
for sdksdir in /Developer/SDKs \
/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs \
/Library/Developer/CommandLineTools/SDKs
do
#
# Get a list of all the SDKs.
#
if ! test -d "$sdksdir"
then
#
# There is no directory with that name.
# Move on to the next one in the list, if any.
#
continue
fi
#
# Get a list of all the SDKs in that directory, if any.
# We assume it'll be a while before there's a macOS 100. :-)
#
sdklist=`(cd "$sdksdir"; ls -d MacOSX[1-9][0-9].[0-9]*.sdk 2>/dev/null)`
for sdk in $sdklist
do
#
# Get the major and minor version for this SDK.
#
sdk_major=`echo "$sdk" | sed -n 's/MacOSX\([1-9][0-9]*\)\..*\.sdk/\1/p'`
sdk_minor=`echo "$sdk" | sed -n 's/MacOSX[1-9][0-9]*\.\(.*\)\.sdk/\1/p'`
#
# Is it for the deployment target or some later release?
# Starting with major 11, the minor version no longer matters.
#
if test "$sdk_major" -gt "$min_osx_target_major" -o \
\( "$sdk_major" -eq "$min_osx_target_major" -a \
\( "$sdk_major" -ge 11 -o \
"$sdk_minor" -ge "$min_osx_target_minor" \) \)
then
#
# Yes, use it.
#
sdkpath="$sdksdir/$sdk"
break 2
fi
done
done
if [ -z "$sdkpath" ]
then
echo "macos-setup.sh: Couldn't find an SDK for macOS $min_osx_target or later" 1>&2
exit 1
fi
SDKPATH="$sdkpath"
echo "Using the $sdk_major.$sdk_minor SDK"
#
# Make sure there are links to /usr/local/include and /usr/local/lib
# in the SDK's usr/local.
#
if [ ! -e $SDKPATH/usr/local/include ]
then
if [ ! -d $SDKPATH/usr/local ]
then
sudo mkdir $SDKPATH/usr/local
fi
sudo ln -s /usr/local/include $SDKPATH/usr/local/include
fi
if [ ! -e $SDKPATH/usr/local/lib ]
then
if [ ! -d $SDKPATH/usr/local ]
then
sudo mkdir $SDKPATH/usr/local
fi
sudo ln -s /usr/local/lib $SDKPATH/usr/local/lib
fi
#
# Set the minimum OS version for which to build to the specified
# minimum target OS version, so we don't, for example, end up using
# linker features supported by the OS verson on which we're building
# but not by the target version.
#
VERSION_MIN_FLAGS="-mmacosx-version-min=$min_osx_target"
#
# Compile and link against the SDK.
#
SDKFLAGS="-isysroot $SDKPATH"
fi
export CFLAGS
export CXXFLAGS
#
# You need Xcode or the command-line tools installed to get the compilers (xcrun checks both).
#
if [ ! -x /usr/bin/xcrun ]; then
echo "Please install Xcode (app or command line) first (should be available on DVD or from the Mac App Store)."
exit 1
fi
if [ "$QT_VERSION" ]; then
#
# We need Xcode, not just the command-line tools, installed to build
# Qt.
#
# At least with Xcode 8, /usr/bin/xcodebuild --help fails if only
# the command-line tools are installed and succeeds if Xcode is
# installed. Unfortunately, it fails *with* Xcode 3, but
# /usr/bin/xcodebuild -version works with that and with Xcode 8.
# Hopefully it fails with only the command-line tools installed.
#
if /usr/bin/xcodebuild -version >/dev/null 2>&1; then
:
elif qmake --version >/dev/null 2>&1; then
:
else
echo "Please install Xcode first (should be available on DVD or from the Mac App Store)."
echo "The command-line build tools are not sufficient to build Qt."
echo "Alternatively build QT according to: https://gist.github.com/shoogle/750a330c851bd1a924dfe1346b0b4a08#:~:text=MacOS%2FQt%5C%20Creator-,Go%20to%20Qt%20Creator%20%3E%20Preferences%20%3E%20Build%20%26%20Run%20%3E%20Kits,for%20both%20compilers%2C%20not%20gcc%20."
exit 1
fi
fi
export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig
#
# Do all the downloads and untarring in a subdirectory, so all that
# stuff can be removed once we've installed the support libraries.
if [ ! -d "${MACOSX_SUPPORT_LIBS}" ]
then
mkdir "${MACOSX_SUPPORT_LIBS}" || exit 1
fi
cd "${MACOSX_SUPPORT_LIBS}"
install_all
echo ""
#
# Indicate what paths to use for pkg-config and cmake.
#
pkg_config_path=/usr/local/lib/pkgconfig
if [ "$QT_VERSION" ]; then
qt_base_path=$HOME/Qt$QT_VERSION/$QT_VERSION/clang_64
pkg_config_path="$pkg_config_path":"$qt_base_path/lib/pkgconfig"
CMAKE_PREFIX_PATH="$CMAKE_PREFIX_PATH":"$qt_base_path/lib/cmake"
fi
if $no_build; then
echo "All required dependencies downloaded. Run without -n to install them."
exit 0
fi
echo "You are now prepared to build Wireshark."
echo
echo "To build:"
echo
echo "export PKG_CONFIG_PATH=$pkg_config_path"
echo "export CMAKE_PREFIX_PATH=$CMAKE_PREFIX_PATH"
echo "export PATH=$PATH:$qt_base_path/bin"
echo
echo "mkdir build; cd build"
if [ ! -z "$NINJA_VERSION" ]; then
echo "cmake -G Ninja .."
echo "ninja wireshark_app_bundle logray_app_bundle # (Modify as needed)"
echo "ninja install/strip"
else
echo "cmake .."
echo "make $MAKE_BUILD_OPTS wireshark_app_bundle logray_app_bundle # (Modify as needed)"
echo "make install/strip"
fi
echo
echo "Make sure you are allowed capture access to the network devices"
echo "See: https://gitlab.com/wireshark/wireshark/-/wikis/CaptureSetup/CapturePrivileges"
echo
exit 0
View Git Blame Copy Permalink