forked from osmocom/wireshark
130 lines
4.2 KiB
C
130 lines
4.2 KiB
C
/* packet-mbtcp.h
|
|
*
|
|
* Routines for Modbus/TCP dissection
|
|
* By Riaan Swart <rswart@cs.sun.ac.za>
|
|
* Copyright 2001, Institute for Applied Computer Science
|
|
* University of Stellenbosch
|
|
*
|
|
* See http://www.modbus.org/ for information on Modbus/TCP.
|
|
*
|
|
* Wireshark - Network traffic analyzer
|
|
* By Gerald Combs <gerald@wireshark.org>
|
|
* Copyright 1998 Gerald Combs
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0-or-later
|
|
*/
|
|
#define PORT_MBTCP 502 /* Modbus/TCP located on port 502, with IANA registration */
|
|
#define PORT_MBTLS 802 /* Modbus/TCP Security protocol (Modbus/TCP over TLS) is registered on port 802 */
|
|
#define PORT_MBRTU 0 /* Modbus RTU over TCP does not have a standard port, default to zero */
|
|
|
|
/* Modbus protocol function codes */
|
|
#define READ_COILS 1
|
|
#define READ_DISCRETE_INPUTS 2
|
|
#define READ_HOLDING_REGS 3
|
|
#define READ_INPUT_REGS 4
|
|
#define WRITE_SINGLE_COIL 5
|
|
#define WRITE_SINGLE_REG 6
|
|
#define READ_EXCEPT_STAT 7
|
|
#define DIAGNOSTICS 8
|
|
#define GET_COMM_EVENT_CTRS 11
|
|
#define GET_COMM_EVENT_LOG 12
|
|
#define WRITE_MULT_COILS 15
|
|
#define WRITE_MULT_REGS 16
|
|
#define REPORT_SLAVE_ID 17
|
|
#define READ_FILE_RECORD 20
|
|
#define WRITE_FILE_RECORD 21
|
|
#define MASK_WRITE_REG 22
|
|
#define READ_WRITE_REG 23
|
|
#define READ_FIFO_QUEUE 24
|
|
#define ENCAP_INTERFACE_TRANSP 43
|
|
#define UNITY_SCHNEIDER 90
|
|
|
|
/* Modbus protocol exception codes */
|
|
#define ILLEGAL_FUNCTION 0x01
|
|
#define ILLEGAL_ADDRESS 0x02
|
|
#define ILLEGAL_VALUE 0x03
|
|
#define SLAVE_FAILURE 0x04
|
|
#define ACKNOWLEDGE 0x05
|
|
#define SLAVE_BUSY 0x06
|
|
#define MEMORY_ERR 0x08
|
|
#define GATEWAY_UNAVAILABLE 0x0a
|
|
#define GATEWAY_TRGT_FAIL 0x0b
|
|
|
|
/* Modbus diagnostic subfunction codes */
|
|
#define RETURN_QUERY_DATA 0x00
|
|
#define RESTART_COMMUNICATION_OPTION 0x01
|
|
#define RETURN_DIAGNOSTIC_REGISTER 0x02
|
|
#define CHANGE_ASCII_INPUT_DELIMITER 0x03
|
|
#define FORCE_LISTEN_ONLY_MODE 0x04
|
|
#define CLEAR_COUNTERS_AND_DIAG_REG 0x0A
|
|
#define RETURN_BUS_MESSAGE_COUNT 0x0B
|
|
#define RETURN_BUS_COMM_ERROR_COUNT 0x0C
|
|
#define RETURN_BUS_EXCEPTION_ERROR_COUNT 0x0D
|
|
#define RETURN_SLAVE_MESSAGE_COUNT 0x0E
|
|
#define RETURN_SLAVE_NO_RESPONSE_COUNT 0x0F
|
|
#define RETURN_SLAVE_NAK_COUNT 0x10
|
|
#define RETURN_SLAVE_BUSY_COUNT 0x11
|
|
#define RETURN_BUS_CHAR_OVERRUN_COUNT 0x12
|
|
#define CLEAR_OVERRUN_COUNTER_AND_FLAG 0x14
|
|
|
|
|
|
|
|
/* Encapsulation Interface codes */
|
|
#define CANOPEN_REQ_RESP 0x0D
|
|
#define READ_DEVICE_ID 0x0E
|
|
|
|
/* Event byte codes */
|
|
#define REMOTE_DEVICE_RECV_EVENT_MASK 0x80
|
|
#define REMOTE_DEVICE_SEND_EVENT_MASK 0xc0
|
|
#define REMOTE_DEVICE_SEND_EVENT_VALUE 0x40
|
|
|
|
/* return codes of function classifying packets as query/response */
|
|
#define QUERY_PACKET 0
|
|
#define RESPONSE_PACKET 1
|
|
#define CANNOT_CLASSIFY 2
|
|
|
|
#define MODBUS_PROTOCOL_ID 0
|
|
|
|
/* Preferences for Modbus/TCP Dissector */
|
|
#define MODBUS_PREF_REGISTER_FORMAT_UINT16 0
|
|
#define MODBUS_PREF_REGISTER_FORMAT_UINT32 1
|
|
#define MODBUS_PREF_REGISTER_FORMAT_IEEE_FLOAT 2
|
|
#define MODBUS_PREF_REGISTER_FORMAT_MODICON_FLOAT 3
|
|
#define MODBUS_PREF_REGISTER_FORMAT_INT16 4
|
|
#define MODBUS_PREF_REGISTER_FORMAT_INT32 5
|
|
|
|
typedef struct {
|
|
guint32 fnum;
|
|
guint8 function_code;
|
|
guint16 mbtcp_transid;
|
|
guint8 unit_id;
|
|
guint16 base_address;
|
|
guint16 num_reg;
|
|
nstime_t req_time;
|
|
} modbus_request_info_t;
|
|
|
|
typedef struct {
|
|
int packet_type;
|
|
guint16 mbtcp_transid; /* Set to zero if not available */
|
|
guint8 unit_id; /* Set to zero if not available */
|
|
} modbus_data_t;
|
|
|
|
/* List contains request data */
|
|
typedef struct {
|
|
wmem_list_t *modbus_request_frame_data;
|
|
gint register_format;
|
|
} modbus_conversation;
|
|
|
|
/*
|
|
* Editor modelines
|
|
*
|
|
* Local Variables:
|
|
* c-basic-offset: 4
|
|
* tab-width: 8
|
|
* indent-tabs-mode: nil
|
|
* End:
|
|
*
|
|
* ex: set shiftwidth=4 tabstop=8 expandtab:
|
|
* :indentSize=4:tabSize=8:noTabs=true:
|
|
*/
|