wireshark/epan/dissectors/packet-ipmi.h

192 lines
6.2 KiB
C

/* packet-ipmi.h
* Definitions for IPMI dissection
* Copyright 2002-2008, Alexey Neyman, Pigeon Point Systems <avn@pigeonpoint.com>
*
* Wireshark - Network traffic analyzer
* By Gerald Combs <gerald@wireshark.org>
* Copyright 1998 Gerald Combs
*
* SPDX-License-Identifier: GPL-2.0-or-later
*/
#ifndef __PACKET_IPMI_H__
#define __PACKET_IPMI_H__
#include <epan/expert.h>
/* IPMI definitions */
/* Max 32 netfn codes: 6 bits, of which 1 designates request/response */
#define IPMI_NETFN_MAX 32
/* IPMI Network Function supported values.
*/
#define IPMI_CHASSIS_REQ 0x00 /* Chassis */
#define IPMI_BRIDGE_REQ 0x02 /* Bridge */
#define IPMI_SE_REQ 0x04 /* Sensor/Event */
#define IPMI_APP_REQ 0x06 /* Application */
#define IPMI_UPDATE_REQ 0x08 /* Firmware update */
#define IPMI_STORAGE_REQ 0x0a /* Storage */
#define IPMI_TRANSPORT_REQ 0x0c /* Transport */
#define IPMI_GROUP_REQ 0x2c /* Group */
#define IPMI_OEM_REQ 0x2e /* OEM */
/* Selector for dissecting OEM commands which do not carry OEM signatures.
* IPMI spec says these commands are to be specified by OEM and depend on
* the IANA number reported via Get Device ID. However, Wireshark has no
* means to guess that. Therefore, allow the user to select which OEM commands
* should be used. This applies to the following netFns: 0x08/0x09 (Update),
* 0x30..0x3f. Note that the commands which bear defining body signature
* (netFns 0x2c..0x2f) are registered with IPMI_OEM_NONE, as they can be
* recognized. */
enum {
IPMI_OEM_NONE = 0,
IPMI_OEM_PPS /* Pigeon Point Systems extensions */
};
/*
* Command context (environment).
*/
enum {
IPMI_E_NONE, /* no surround environment */
IPMI_E_SENDMSG_RQ, /* encapsulated into Send Message request */
IPMI_E_SENDMSG_RS, /* encapsulated into Send Message response */
IPMI_E_GETMSG /* encapsulated into Get Message response */
};
/*
* Cached IPMI message header.
*/
typedef struct {
guint8 context;
guint8 channel;
guint8 dir;
guint8 session;
guint8 rs_sa;
guint8 rs_lun;
guint8 netfn;
guint8 rq_sa;
guint8 rq_lun;
guint8 rq_seq;
guint8 cmd;
} ipmi_header_t;
/* Sub-parser */
typedef void (*ipmi_cmd_handler_t)(tvbuff_t *,
packet_info *, proto_tree *);
/* IPMI command structure. */
typedef struct {
guint32 cmd; /* Command number */
ipmi_cmd_handler_t parse_req; /* Request parser */
ipmi_cmd_handler_t parse_resp; /* Response parser */
const value_string *cs_cc; /* Command-specific completion codes */
const value_string *subfn; /* Subfunction codes */
const char *desc; /* Command description */
int flags; /* Command flags */
} ipmi_cmd_t;
/* Command flags */
#define CMD_CALLRQ 0x02 /* Call request handler early to cache data */
/* Get currently parsed message header */
const ipmi_header_t * ipmi_get_hdr(packet_info * pinfo);
/* Get completion code for currently parsed message */
guint8 ipmi_get_ccode(packet_info * pinfo);
/* Save request data for later use in response */
void ipmi_set_data(packet_info *pinfo, guint idx, guint32 data);
/* Get saved request data */
gboolean ipmi_get_data(packet_info *pinfo, guint idx, guint32 * data);
/* Top-level search structure: signatures (if any) + command table */
typedef struct ipmi_netfn_handler {
struct ipmi_netfn_handler *next;
const char *desc;
guint oem_selector;
const guint8 *sig;
ipmi_cmd_t *cmdtab;
guint32 cmdtablen;
} ipmi_netfn_t;
/* Stub parser. Use this to substitute for not-yet-written subparsers;
NULL in command table means 'no custom data in this request/response' */
void ipmi_notimpl(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree);
#define IPMI_TBD ipmi_notimpl, ipmi_notimpl
/* Add a Type/Length field to tree */
void ipmi_add_typelen(packet_info *pinfo, proto_tree *tree, int hf_string, int hf_type, int hf_length, tvbuff_t *tvb,
guint offs, gboolean is_fru);
/* Add Timestamp in IPMI format */
void ipmi_add_timestamp(packet_info *pinfo, proto_tree *tree, gint hf, tvbuff_t *tvb, guint offset);
/* GUID, IPMI style (fields reversed, little-endian) */
void ipmi_add_guid(proto_tree *tree, gint hf, tvbuff_t *tvb, guint offset);
/* Common format routines */
void ipmi_fmt_10ms_1based(gchar *, guint32);
void ipmi_fmt_500ms_0based(gchar *, guint32);
void ipmi_fmt_500ms_1based(gchar *, guint32);
void ipmi_fmt_1s_0based(gchar *, guint32);
void ipmi_fmt_1s_1based(gchar *, guint32);
void ipmi_fmt_2s_0based(gchar *, guint32);
void ipmi_fmt_5s_1based(gchar *, guint32);
void ipmi_fmt_version(gchar *, guint32);
void ipmi_fmt_channel(gchar *, guint32);
void ipmi_fmt_udpport(gchar *, guint32);
void ipmi_fmt_percent(gchar *, guint32);
/* Registrar for subparsers */
void ipmi_register_netfn_cmdtab(guint32 netfn, guint oem_selector,
const guint8 *sig, guint32 siglen, const char *desc,
ipmi_cmd_t *cmdtab, guint32 cmdtablen);
/* Lookup routines */
guint32 ipmi_getsiglen(guint32 netfn);
const char *ipmi_getnetfnname(wmem_allocator_t *pool, guint32 netfn, ipmi_netfn_t *nf);
ipmi_netfn_t *ipmi_getnetfn(guint32 netfn, const guint8 *sig);
ipmi_cmd_t *ipmi_getcmd(ipmi_netfn_t *nf, guint32 cmd);
const char *ipmi_get_completion_code(guint8 completion, ipmi_cmd_t *cmd);
/* Used for sub-registrars (ipmi_*.c) */
extern gint proto_ipmi;
/* Main dissection routine */
#define IPMI_D_NONE 0x0001 /* Do not parse at all */
#define IPMI_D_SESSION_HANDLE 0x0002 /* Session handle */
#define IPMI_D_BROADCAST 0x0004 /* Check for broadcast message */
#define IPMI_D_TRG_SA 0x0008 /* Target slave addr is present */
#define IPMI_D_TMODE 0x0010 /* Bridged field instead of Rq LUN */
#define IPMI_D_NO_CKS 0x0020 /* Checksum bytes are not present */
#define IPMI_D_NO_RQ_SA 0x0040 /* RQ SA is not present */
#define IPMI_D_NO_SEQ 0x0080 /* RQ Seq is not present */
/* IPMI dissector argument */
typedef struct {
guint8 context;
guint8 channel;
guint8 flags;
} ipmi_dissect_arg_t;
int
do_dissect_ipmb(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree,
gint hf_parent_item, gint ett_tree, ipmi_dissect_arg_t * arg);
#endif /* __PACKET_IPMI_H__ */
/*
* Editor modelines - https://www.wireshark.org/tools/modelines.html
*
* Local variables:
* c-basic-offset: 8
* tab-width: 8
* indent-tabs-mode: t
* End:
*
* vi: set shiftwidth=8 tabstop=8 noexpandtab:
* :indentSize=8:tabSize=8:noTabs=false:
*/