$Id$

1. Introduction

NB: Wmem still does not provide all of the functionality of emem
    (see README.malloc), although it should provide most of it. New code
    may still need to use emem for the time being.

The 'emem' memory manager (described in README.malloc) has been a part of
Wireshark since 2005 and has served us well, but is starting to show its age.
The framework has become increasingly difficult to maintain, and limitations
in the API have blocked progress on other long-term goals such as multi-
threading, and opening multiple files at once.

The 'wmem' memory manager is an attempt to write a new memory management
framework to replace emem. It provides a significantly updated API, a more
modular design, and it isn't all jammed into one 2500-line file.

Wmem was originally conceived in this email to the wireshark-dev mailing list:
https://www.wireshark.org/lists/wireshark-dev/201210/msg00178.html

The wmem code can now be found in epan/wmem/ in the Wireshark source tree.

2. Usage for Consumers

If you're writing a dissector, or other "userspace" code, then using wmem
should be very similar to using emem. All you need to do is include the header
(epan/wmem/wmem.h) and get a handle to a memory pool (if you want to *create*
a memory pool, see the section "3. Usage for Producers" below).

A memory pool is an opaque pointer to an object of type wmem_allocator_t, and
it is the very first parameter passed to almost every call you make to wmem.
Other than that parameter (and the fact that functions are prefixed wmem_
instead of ep_ or se_) usage is exactly like that of emem. For example:

    wmem_alloc(myPool, 20);

allocates 20 bytes in the pool pointed to by myPool.

2.1 Available Pools

2.1.1 (Sort Of) Global Pools

Dissectors that include the wmem header file will have three pools available
to them automatically: wmem_packet_scope(), wmem_file_scope() and
wmem_epan_scope();

The packet pool is scoped to the dissection of each packet, replacing
emem's ep_ allocators. The file pool is scoped to the dissection of each file,
replacing emem's se_ allocators. For example:

    ep_malloc(32);
    se_malloc(sizeof(guint));

could be replaced with

    wmem_alloc(wmem_packet_scope(), 32);
    wmem_alloc(wmem_file_scope(),   sizeof(guint));

NB: Using these pools outside of the appropriate scope (eg using the packet
    pool when there isn't a packet being dissected) will throw an assertion.
    See the comment in epan/wmem/wmem_scopes.c for details.

The epan pool is scoped to the library's lifetime - memory allocated in it is
not freed until epan_cleanup() is called, which is typically at the end of the
program. 

2.1.2 Pinfo Pool

Certain places (such as AT_STRINGZ address allocations) need their memory to
stay around a little longer than the usual packet scope - basically until the
next packet is dissected. This is effectively the scope of Wireshark's pinfo
structure, so the pinfo struct has a 'pool' member which is a wmem pool scoped
to the lifetime of the pinfo struct.

2.2 Core API

 - wmem_alloc
 - wmem_alloc0

2.3 String Utilities

 - wmem_strdup
 - wmem_strndup
 - wmem_strdup_printf
 - wmem_strdup_vprintf

2.4 Stack

 - wmem_create_stack
 - wmem_stack_push
 - wmem_stack_pop
 - wmem_stack_peek
 - wmem_stack_count

2.5 Slab

 - wmem_create_slab
 - wmem_slab_alloc
 - wmem_slab_free

3. Usage for Producers

NB: If you're just writing a dissector, you probably don't need to read
    this section.

One of the problems with the old emem framework was that there were basically
two allocator backends (glib and mmap) that were all mixed together in a mess
of if statements, environment variables and #ifdefs. In wmem the different
allocator backends are cleanly separated out, and it's up to the owner of the
pool to pick one.

3.1 Available Allocator Back-Ends

The currently available allocators are:
 - glib (wmem_allocator_glib.h)
        A simple allocator that g_allocs requested memory and tracks each
        allocation via a linked list.
 - block (wmem_allocator_block.h)
        A simple block allocator that grabs large chunks of memory at a time
        (8 MB currently) and serves allocations out of those chunks.

3.2 Creating a Pool

To create a pool, include the header for the type of allocator you want to use
and call the create function available in that header. For example,

    #include "wmem/wmem_allocator_glib.h"

    wmem_allocator_t *myPool;
    myPool = wmem_create_glib_allocator();

From here on in, you don't need to remember which type of allocator you used
(although allocator authors are welcome to expose additional allocator-specific
helper functions in their headers). The "myPool" variable can be passed around
and used as normal in allocation requests as described in section 2 of this
document.

All the other functions described in this section can be found
in epan/wmem/wmem.h.

3.3 Destroying a Pool

Regardless of which allocator you used to create a pool, it can be destroyed
with a call to the function wmem_destroy_allocator(). For example:

    #include "wmem/wmem.h"
    #include "wmem/wmem_allocator_glib.h"

    wmem_allocator_t *myPool;

    myPool = wmem_create_glib_allocator();

    /* Allocate some memory in myPool ... */

    wmem_destroy_allocator(myPool);

Destroying a pool will free all the memory allocated in it.

3.4 Reusing a Pool

It is possible to free all the memory in a pool without destroying it,
allowing it to be reused later. Depending on the type of allocator, doing this
(by calling wmem_free_all()) can be significantly cheaper than fully destroying
and recreating the pool. This method is therefore recommended, especially when
the pool would otherwise be scoped to a single iteration of a loop. For example:

    #include "wmem/wmem.h"
    #include "wmem/wmem_allocator_glib.h"

    wmem_allocator_t *myPool;

    myPool = wmem_create_glib_allocator();
    for (...) {

        /* Allocate some memory in myPool ... */

        /* Free the memory, faster than destroying and recreating
           the pool each time through the loop. */
        wmem_free_all(myPool);
    }
    wmem_destroy_allocator(myPool);

4. Internal Design

Despite being written in Wireshark's standard C90, wmem follows a fairly
object-oriented design pattern. Although efficiency is always a concern, the
primary goals in writing wmem were maintainability, and preventing memory
leaks.

4.1 struct _wmem_allocator_t

The heart of wmem is the _wmem_allocator_t structure defined in the
wmem_allocator.h header file. This structure uses C function pointers to
implement a common object-oriented pattern known as an interface (AKA 'abstract
class' to those of you who are more familiar with C++).

Different allocator implementations can provide exactly the same interface by
assigning their own functions (of the appropriate signature) to the members of
an instance of the structure. The structure currently has four values:

 - alloc()
 - free_all()
 - destroy()
 - private_data

The private_data pointer is a void pointer that the implementation can use to
store whatever internal structures it needs. The other three functions should
be fairly obvious - each one is called with a pointer to the private_data in
addition to any other arguments.

4.2 Pool-Agnostic API

One of the issues with emem was that the API (including the public data
structures) required wrapper functions for each scope implemented. Even
if there was a stack implementation in emem, it wasn't necessarily available
for use with file-scope memory unless someone took the time to write se_stack_
wrapper functions for the interface.

In wmem, all public APIs take the pool as the first argument, so that they can
be written once and used with any available memory pool. Data structures like
wmem's stack implementation only take the pool when created - the provided
pointer is stored internally with the data structure, and subsequent calls
(like push and pop) will take the stack itself instead of the pool.

5. TODO List

The following is an incomplete list of things that emem provides but wmem has
not yet implemented:

 - strbuf
 - red-black tree
 - tvb_memdup
 - canaries

The following is a list of things that emem doesn't provide but that it might
be nice if wmem did provide them:

 - radix tree

/*
 * Editor modelines  -  http://www.wireshark.org/tools/modelines.html
 *
 * Local variables:
 * c-basic-offset: 4
 * tab-width: 8
 * indent-tabs-mode: nil
 * End:
 *
 * vi: set shiftwidth=4 tabstop=8 expandtab:
 * :indentSize=4:tabSize=8:noTabs=true:
 */