Michael cleaned up the strcpy()'s which were preventing it from running
without errors.
Change-Id: I3f02150a9b1fbefddb67c0cb90fc2c58766d7d2a
Reviewed-on: https://code.wireshark.org/review/15375
Petri-Dish: Jeff Morriss <jeff.morriss.ws@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Use libSSH 0.7.2 compiled with MinGW(32|64) and linked with zlib and gcrypt support
Change-Id: I7c17d1ba3dd1890e2f83c119f5ea851834807e43
Reviewed-on: https://code.wireshark.org/review/12117
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The newer version creates a system restore point during installation
Also add an explicit note in Wireshark installer explaining that USBPcap is
experimental and some hints on how to recover in case of issue
Bug: 12316
Change-Id: Ifb15ee98bf9db843debe5878f3df8c78f846d8d0
Reviewed-on: https://code.wireshark.org/review/14854
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add a deprecation warning to config.nmake which can be disabled by setting
YES_I_KNOW_ABOUT_THE_DEPRECATION. Note that it will become a warning at
some point in the future.
Make a list of files that will be removed or updated in Makefile.nmake.
Change-Id: I50d68eb3dea1bf5baee1e8a90d007c06d3aa1fa3
Reviewed-on: https://code.wireshark.org/review/14591
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Using cmake -DENABLE_EXTCAP=no or ./configure --without-extcap.
Some documentation fixes too.
Change-Id: Iebf9c843d67e10a32de1a62904de8f88b872ec99
Reviewed-on: https://code.wireshark.org/review/14522
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
Don't try to run it (automake only) in dcerpc: there's no target for it there.
Change-Id: Idaf1d3d3ac27e837f484520406e604c12c4b473f
Reviewed-on: https://code.wireshark.org/review/14346
Reviewed-by: Anders Broman <a.broman58@gmail.com>
If you include something from the wiretap directory, always precede it
with wiretap/.
Fix some includes of files in the top-level directory to use a path
relative to the current directory, not relative to the wiretap
directory.
This makes it a bit clearer what's being included.
Change-Id: Ib99655a13c6006cf6c3112e9d4db6f47df9aff54
Reviewed-on: https://code.wireshark.org/review/13990
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Also, add it to the list of dependencies.
Change-Id: I424c0657c87ab97d704b86a3b0722fb7f33b9f49
Reviewed-on: https://code.wireshark.org/review/13949
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Also, get rid of the stuff for the extcap programs, as that's now
handled by extcap/Makefile.nmake.
Change-Id: Ide94c1cfc97d50e5d9fabbb923d9c52cccb62fa0
Reviewed-on: https://code.wireshark.org/review/13947
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That lets the version of Wireshark built with autotools find the extcap
programs.
Don't install the extcap programs under ${datadir} - that puts it under
a share directory, and share directories are for platform-independent
files, which executable images aren't (they're instruction-set
dependent, hence platform-dependent).
Change-Id: I992eeb984bdbe6b3476777f7114628c83df6080f
Reviewed-on: https://code.wireshark.org/review/13943
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This also moved color.h into color_filters.h
Change-Id: Ic19e27aa1b3ec67e764aa7ee8bbef7b1187bb12e
Reviewed-on: https://code.wireshark.org/review/12831
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Change-Id: I1a855b69f1d5213e73c8de3b49ceac9262898c95
Reviewed-on: https://code.wireshark.org/review/12827
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This new extcap is for testing and educational purpose.
It relies on rankpkt-core functions to generate random packets.
Change-Id: If6890f0673545682995a2079458108edc0913b30
Reviewed-on: https://code.wireshark.org/review/11764
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
NSIS script modified to:
- check for KB 3033929 presence on Windows 7 / 2008R2 (as we sign drivers with a SHA2 certificate)
- do not delete the installation folder if not empty
Bug: 11766
Change-Id: I5c7b6378b0775bb75c1b9e58e503997176c12213
Reviewed-on: https://code.wireshark.org/review/12546
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
It's an ancient obsolete option with a confusing name.
Change-Id: Ib10330cf859cdea18fed2077c6539e56350ef380
Reviewed-on: https://code.wireshark.org/review/11967
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
sshdump is an extcap module that allows dumping from a remote host using an ssh connection.
It goes with the existing extcap plugin interface.
Change-Id: I8987614fdd817b8173a50130812bc643a4833bca
Reviewed-on: https://code.wireshark.org/review/11402
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Note the "initial". This is woefully incomplete. See the "to do" lists
below and in the code.
This differs a bit from the GTK+ version in that you specify one or more
streams to be decoded.
Instead of showing waveforms in individual widgets, add them all to a
single QCustomPlot. This conserves screen real estate and lets us more
easily take advantage of the QCP API. It also looks better IMHO.
Change a bunch of checks for QtMultimediaWidgets to QtMultimedia. We
probably won't use the widgets until we make 5.0 our minimum Qt
version and plain old QtMultimedia lets us support Qt 4 more easily
(in theory at least).
Add resampling code from libspeex. I initially used this to resample
each packet to match the preferred rate of our output device, but this
resulted in poorer audio quality than expected. Leave it in and use to
create visual samples for QCP and to match rates any time the rate
changes. The latter is currently untested.
Add some debugging macros.
Note that both the RTP player and RTP analysis dialogs decode audio data
using different code.
Note that voip_calls_packet and voip_calls_init_tap appear to be dead
code.
To do:
- Add silence frames where needed.
- Implement the jitter buffer.
- Implement the playback timing controls.
- Tapping / scanning streams might be too slow.
Change-Id: I20dd3b66d3df53c9b1f3501262dc01458849f6b4
Bug: 9007
Reviewed-on: https://code.wireshark.org/review/10458
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add support for the locally modified version of zlib to suppress
a CMake warning and disable building of the zlib examples.
Change-Id: I9ae08b49d149951e8626d506f69f1757a1ec7e23
Reviewed-on: https://code.wireshark.org/review/8706
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Our default rules are confused because source file is in a subfolder of the nmake makefile
Change-Id: If3dee4cd5b3be493abfe8c696383fb170952260b
Reviewed-on: https://code.wireshark.org/review/8068
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
On Windows, prepend the main program directory to %Path% when spawning
extcap processes. This lets us place androiddump in extcap while allowing
it to locate its DLLs.
Change-Id: I406c47ce71323266d5f14fb596931398464e452d
Reviewed-on: https://code.wireshark.org/review/8057
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add missing androiddump stuff like:
- release notes
- documentation
- Windows nmake support
- running androiddump as a windows application instead of console on Windows
- addition of androiddump to the Windows installer
Change-Id: I3bc6cc70e4dc96c0cd776f3d965dd2aa0309995d
Reviewed-on: https://code.wireshark.org/review/7981
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Update the PA section of the Developer's Guide.
Change-Id: I383d2a2405e742eb353390f5a43fd6d6d32cb25b
Reviewed-on: https://code.wireshark.org/review/8012
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add a "test-programs" target to each toolchain which builds each unit
test executable. "test-programs" must now be built before running
the unit test suite.
Change-Id: I9317a1e305d987f244c4bd8b4a7f05d11fed7090
Reviewed-on: https://code.wireshark.org/review/7673
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add packaging/nsis/CMakeLists.txt and use it to generate each NSIS include
file. Add macros to generate packaging-related targets and invoke them
from the top-level CMakeLists.txt.
Add a top-level "plugins" target. Copy plugins to "plugins" in each of
our staging directories instead of "plugins/$VERSION".
Add missing files to the copy_data_files and copy_cli_dlls targets.
Add all files in the NSIS package from the staging directory.
Drop a bunch of no-longer-needed defines, e.g. MSVC_VARIANT.
Change-Id: Ib1079260d164c65118050f1431af8e582cd577fa
Reviewed-on: https://code.wireshark.org/review/6459
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Most of our sites are now HTTPS-only. Update URLs accordingly. Update
other URLs while we're at it. Remove or comment out dead links.
Change-Id: I7c4f323e6585d22760bb90bf28fc0faa6b893a33
Reviewed-on: https://code.wireshark.org/review/7621
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add a "flavor" (for lack of a better word) banner, which can be set at
build time via WIRESHARK_VERSION_FLAVOR / VERSION_FLAVOR. Set it to
"Development Build" by default. This effectively migrates the
"DEVELOPMENT VERSION" logo image text from the GTK+ UI.
Add full release and automatic update information at the bottom.
Remove the short version from the welcome banner (top left).
To do:
- Add back support for gui_version_placement.
- Move the version and repository branch to the flavor label?
- Add update links as appropriate to the bottom.
- Clean up layout and spacing.
Change-Id: I28af33e6c2beb855f803a2dfedef49f3e8389057
Reviewed-on: https://code.wireshark.org/review/7071
Reviewed-by: Gerald Combs <gerald@wireshark.org>
When *_DIR variables are defined (even if empty), nmake tries
to build them and fails.
Don't set them at all if not configured to.
Change-Id: I3825c16f26e45a1a3fc489633084a074838f8c34
Reviewed-on: https://code.wireshark.org/review/6365
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>