Move WiresharkApplication.{cpp,h} to MainApplication.{cpp,h}. Add back
WiresharkApplication as a thin superclass of MainApplication, similar to
LogsharkApplication. Change all of our wsApp references to mainApp. We
will likely have to change many or most of them back, but that's a
commit for another time.
Qt 5.10 added qsizetype, aka an ssize_t and Qt 6 makes extensive use of
it. Add a compatibility typedef and use it where we can. Cast it away
where we can't.
Remove the editor modeline blocks from most of the source files in ui/qt
by running
perl -i -p0e 's{ \n+ /[ *\n]+ editor \s+ modelines .* shiftwidth= .* \*/ \s+ } {\n}gsix' $( ag -g '\.(cpp|h)' )
then cleaning up the remaining files by hand.
This *shouldn't* affect anyone since
- All of the source files in ui/qt use 4 space indentation, which
matches the default in our top-level .editorconfig
- The one notable editor that's likely to be used on these files and
*doesn't* support EditorConfig (Qt Creator) defaults to 4 space
indentation.
Move */ to a separate line below the SPDX identifier.
Change-Id: Id1032215449cfccae0933147b45e04b65e0b727f
Reviewed-on: https://code.wireshark.org/review/27211
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The first is deprecated, as per https://spdx.org/licenses/.
Change-Id: I8e21e1d32d09b8b94b93a2dc9fbdde5ffeba6bed
Reviewed-on: https://code.wireshark.org/review/25661
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
SCSI requires parameter data to be passed into the tap. Provide
a new dialog that can handle SCSI commands.
Bug: 14144
Change-Id: I4561f251ec38753a28befee33b8b994b04b92230
Reviewed-on: https://code.wireshark.org/review/24955
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
TapParameterDialog::on_applyFilterButton_clicked first calls fillTree to
populate the table and endRetapPackets to add the results to GUI. The
table data must remain valid until closing the dialog since the user can
still interact with the GUI.
Change-Id: Ie3105be78d39c562af52f2b49081552063afcada
Ping-Bug: 14141
Reviewed-on: https://code.wireshark.org/review/23994
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
Diameter dynamically create the SRT entries during runtime.
Delay the SRT table addition to the end of dissection to properly handle
this use case.
Bug: 13442
Change-Id: Id498f8d9bb4a1d7c632c9a556239bf74d0530f2a
Reviewed-on: https://code.wireshark.org/review/23443
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
We test against "field" in ServiceResponseTimeDialog::filterExpression.
Make sure we use it within the test as well.
Bug: 12627
Change-Id: If11ab9fcdb8394f4366569185808ec1ddfc34dfe
Reviewed-on: https://code.wireshark.org/review/16672
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add GeometryStateDialog class to handle load and save dialog geometry.
The QDialog class name will be used as window name. For shared
classes the UAT name or the statistics title or abbr will be used.
Change-Id: I5a019598307fb3861518f41e733de834788184d8
Reviewed-on: https://code.wireshark.org/review/14139
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Add cf_cb_file_retap_started and cf_cb_file_retap_finished to file.[ch].
Add their associated signals to CaptureFile.
Add registerTapListener and removeTapListeners to WiresharkDialog, which
collect and automatically remove tap listeners. Add beginRetapPackets
and endRetapPackets, which can be used to wrap critical sections so that
we don't delete ourselves while tapping. Don't cancel tapping on close
in WiresharkDialog.
Use beginRetapPackets and endRetapPackets in WiresharkDialog and
FollowStreamDialog. We will likely need to add them elsewhere.
Update comments.
Change-Id: I1788a6ade0817c31aa3419216df96be5e36b2178
Reviewed-on: https://code.wireshark.org/review/10261
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
If we run into an error when trying to register a tap listener, return
instead of tapping packets. This should fix some (but likely not all)
double frees found by Stig. For now close each statistics dialog if we
find an error. Note that we might want to keep them open instead.
Add checks and cleanups to some of the stats table free routines.
Call fillTree once in TapParameterDialog's constructor instead of each
time it's shown. Make fillTree a slot which lets us use a delay timer so
that the dialog is visible when we retap packets.
Change-Id: Id49f2f2a99bc8e5b1d32990024986b3c8b1abe24
Reviewed-on: https://code.wireshark.org/review/10153
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add the UDP multicast stream dialog. Abuse TapParameterDialog a bit more
so that we can edit parameters.
Remove some unused struct members and an unused function.
Change-Id: I962c70344e792f0959527e4bcba8a20bd7e8acf9
Reviewed-on: https://code.wireshark.org/review/10084
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
QString.toUtf8() returns a QByteArray object and .constData() returns
a pointer inside that object. It is not safe to store this pointer as
it will become invalid after the statement.
Change-Id: I8f54ede75577719008835038934e935cd5feba3f
Reviewed-on: https://code.wireshark.org/review/10067
Reviewed-by: Hadriel Kaplan <hadrielk@yahoo.com>
Petri-Dish: Hadriel Kaplan <hadrielk@yahoo.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add RpcServiceResponseTimeDialog, which handles DCE-RPC and ONC-RPC
service response time statistics. Try to make it as lightweight as
possible, since we might want to pull this into the RPC dissectors
similar to the other SRT statistics.
Allow program names on the command line in place of numbers or UUIDs. Make
matches case-insensitive. E.g. the following are equivalent:
-z rpc,srt,100003,3
-z rpc,srt,nfs,3
-z rpc,srt,NFS,3
as are the following:
-z dcerpc,srt,f5cc5a18-4264-101a-8c59-08002b2f8426,56
-z dcerpc,srt,nspi,56
-z dcerpc,srt,NSPI,56
Change-Id: Ie451c64bf6fbc776f27d81e3bc248435c5cbc9e4
Reviewed-on: https://code.wireshark.org/review/9981
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add CaptureFile::delayedRetapPackets, which starts retapping after the
current batch of UI event are processed. Call it in the constructors of
various dialogs so that they are shown before tapping starts.
This *might* fix a crash found when following large streams from the
Conversations dialog.
Change-Id: If1b87491621ab7efcc0519f95891d34dcd9d18c1
Reviewed-on: https://code.wireshark.org/review/9818
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add ServiceResponseTimeDialog as a subclass of TapParameterDialog,
similar to StatsTreeDialog. Add initial plumbing for statistics menu
items and command line invocation.
Don't append "..." to menu item names. Don't add menu icons. In each
case this avoids repetitive UI clutter.
Change-Id: I463b95c93090160bb81d2e80b16aad389dc0bd6c
Reviewed-on: https://code.wireshark.org/review/8864
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Gerald Combs