There's no need for the capture_option_specified variable; it's now in a
structure.
Change-Id: Ic2f1faee4666eea7ae91fd6899cecaa76d0ceb9f
Reviewed-on: https://code.wireshark.org/review/16018
Reviewed-by: Guy Harris <guy@alum.mit.edu>
There's no need for the capture_option_specified variable, but we *do*
need to initialize the capture_option_specified member of *param_info
before parsing the flags.
Change-Id: I89d0b8c338c2784742b21ba4e854f702ce491849
Reviewed-on: https://code.wireshark.org/review/16017
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Both GTK and Qt both use the same command-line options, so refactor
the parsing and (possibly) applying of those arguments to a single
location.
Ping-Bug: 12546
Change-Id: Ib31e576c509c5d3d21c33d3247640d9f9c68661b
Reviewed-on: https://code.wireshark.org/review/16006
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
abort if it is -1
Change-Id: Ie14c18679ff74529731558d6742f63ebfb9fe97b
Reviewed-on: https://code.wireshark.org/review/15958
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add a reference count to stat_tap_table_ui to prevent bad deallocations.
Bug: 12437
Change-Id: Ib9b1f929d08a574c306dc755ec416ab94a3fd6d3
Reviewed-on: https://code.wireshark.org/review/15920
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The stream is not just shown, but also saved in ASCII, EBDIC, Raw, etc.
Change-Id: Ic29e3273ebb9a3eca0fe791bdd48606c4be3b828
Reviewed-on: https://code.wireshark.org/review/15957
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add padding on the left side of the search frame in order to reduce the
amount of mousing required on large screens.
Change-Id: I1dcd8c4a103f4a462f4ab60a22a93b8c0f28b055
Reviewed-on: https://code.wireshark.org/review/15928
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Most protocols just want to limit COL_INFO or COL_PROTOCOL
so give that level of granularity.
Bug: 12144
Bug: 5117
Bug: 11144
Change-Id: I8de9b7d2c69e90d3fbfc0a52c2bd78c3de58e2f8
Reviewed-on: https://code.wireshark.org/review/15894
Reviewed-by: Jeff Morriss <jeff.morriss.ws@gmail.com>
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
g6ff19ff tried to access cinfo by following a chain of pointers from
expert_info. Access cinfo from cap_file_, which is more reliable. While
we are at it, let's explicitly check the pointer validity.
Change-Id: I0da72c5b1d2230a49c125a1b57c81c3115c4f2fb
Reviewed-on: https://code.wireshark.org/review/15901
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
without losing window decorations on GNOME on the secondary monitor.
Bug: 11303
Change-Id: Ie8f541dba9d49f9fe5d4892a8dc1cd42091afe1d
Reviewed-on: https://code.wireshark.org/review/9077
Reviewed-by: Balint Reczey <balint@balintreczey.hu>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
make sure that generated include files are picked up only from the
directories set by -I (or /I), not from the current directory
if we use #include "file.h", Visual Studio searches for file.h in the
same diretory as the source file that includes file.h
if we do an out-of-tree build with cmake and the source directory
contains files from an in-tree build (done with autotools), we might end
up including the wrong file
Change-Id: Iaaed2626258b6ff0c12485fe3f436bd03bbb5adf
Reviewed-on: https://code.wireshark.org/review/15873
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Make the main window tab order more closely match the GTK+ UI. Draw a
focus rect in the byte view text while we're here.
Change-Id: I04212c14ea7f0d6865b709533246760adc02f45a
Reviewed-on: https://code.wireshark.org/review/15862
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
As noted in gb7897dd, CaptureFilterCombo needs to be read-only until the
app is initialized. Move the code to do so to MainWelcome, otherwise the
capture filter entry in CaptureInterfacesDialog starts out read-only and
stays that way. Disable / enable the entire CaptureFilterCombo instead
of setting its lineEdit read-only status, which provides a stronger
visual indicator.
Change-Id: Ic7bf5b5631b861ecf4dc8cca67beb5bf4ed27510
Reviewed-on: https://code.wireshark.org/review/15859
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
When "group by summary" is enabled, packet items contain a packet number
followed by a lot of empty space. Fill it with the contents of the Info
column.
Set the first column title to "Severity" or "Packet" depending on the
item selection.
Change-Id: Iff96ab2ec631300ec8f08e55019e191e88cff84a
Reviewed-on: https://code.wireshark.org/review/15814
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Added support for importing from hex dump without offsets.
This will create one packet with all hex values found in the file.
Change-Id: I0414441721078befeb59aa6a87b9412646cfcf5c
Reviewed-on: https://code.wireshark.org/review/15743
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Try to make inactive+selected packet list items more visible by drawing
a border around them. Make an exception for Windows 7 and Vista if a
theme is active.
Bug: 12010
Change-Id: I974069dda92588b80772f577f319569751ff3347
Reviewed-on: https://code.wireshark.org/review/15816
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The Gateway Control Protocol (Context Tracking) is used by both H248
and MEGACO, so the functionality was refactored to epan, but should
really be kept in the dissector directory to minimize (and eventually
completely remove) the epan directory's dependence on it.
Change-Id: I387b46aecde97234086bfdb7d8c546854fa301cd
Reviewed-on: https://code.wireshark.org/review/15798
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Fail if:
1) you have an AT_NONE address with data;
2) you have a non-AT_NONE address with a zero length and a
non-null data pointer, or with a non-zero length and a null
data pointer.
When comparing addresses for equality, just make sure the types are the
same, the lengths are the same and, if the lengths are non-zero, the
data is the same; don't treat AT_NONE specially - the "lengths are
non-zero" check will make sure we do the right thing.
Make sure when we create an AT_NONE address it has a zero length and
null data pointer.
Change-Id: I5c452ef0d140c2d9aef3004f1cfd124a95b78fb2
Reviewed-on: https://code.wireshark.org/review/15839
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add the ability to group expert info items by summary and enable it by
default. This more closely matches the GTK+ UI behavior.
Show matching item counts while we're here.
Bug: 12218
Change-Id: Ic02267da8435fb70015de8dd15e0ac46faabbee9
Reviewed-on: https://code.wireshark.org/review/15796
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Device dialog appears when user double clicks on device in
Devices dialog (Bluetooth->Devices). It provides
summary of device, like BD_ADDR, name, timeouts, etc.
Base on information from HCI layer, so this feature is more interesting
for local devices (capturing on its side). Each field has changes counter,
what mean that value at specified field changes in time, for example:
user change device name 3 times. Please note that initial change
is not counted. It means that you can see fielkd without any value
then change occur and counter is not increased. It will be increased
next time. Reason for that is in most cases field value is unknown
at start.
Change-Id: Ife0a6bd454eac00a28f8eb2906e1b395695b0307
Reviewed-on: https://code.wireshark.org/review/15793
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Michal Labedzki <michal.labedzki@tieto.com>
See g21754f43e for detail
There is always some other Q_UNUSED but include on #if/#endif...
Change-Id: Ib2283660c91787acbf6392841faa3db6aed39438
Reviewed-on: https://code.wireshark.org/review/15803
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Set they to zeros at startup like other fields.
Change-Id: I820e7a0ce8fad5726448cb83f85235ecf578d77d
Reviewed-on: https://code.wireshark.org/review/15792
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Michal Labedzki <michal.labedzki@tieto.com>
Prefix operators are supposed to be more efficient with iterators,
so lets use them instead of postfix operators.
Change-Id: I3090e4954c5cb67db47c88e2874b1a8ac52aa2cd
Reviewed-on: https://code.wireshark.org/review/15546
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Qt and GTK+ can have wildly different notions about the top-left
position of the main window, particularly in multiple-screen
configurations. For example, on OS X with the following monitor
arrangment:
g .---------.
| |
| |
q--------.| |
| |`---------'
| |
`--------'
GTK+ positions windows relative to 'g' and Qt positions windows relative
to 'q'. As a result it's easy for one UI to clobber the settings of the
other.
Split the geometry_main_x and geometry_main_y recent settings into Qt
and GTK+ versions.
In the Qt UI, try moving the main window onscreen before falling back to
the default geometry. This keeps us from losing our size settings.
Add a link to a Qt geometry bug.
Change-Id: If7ae0dcc1719e646299ee3bbf1c88743f655c9a0
Ping-Bug: 12389
Reviewed-on: https://code.wireshark.org/review/15775
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
That way you get dropdown suggestions for filter completion.
Change-Id: I2b9d417ca50559ffdc8bd3f7f0e1bbc185c1384d
Reviewed-on: https://code.wireshark.org/review/15592
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
In the Capture Interfaces dialog, make sure we have exactly one of a
"not applicable" dash or a checkbox. Otherwise if your interface falsely
reports that it supports monitor mode you might end up with both.
Change-Id: I9b256f1ef0e8ff32626e7f2b526130f3c110d142
Reviewed-on: https://code.wireshark.org/review/15761
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
This check only works on the GTK UI's "Details" window. And it
only can check version numbers. So there's no way for this code to
be able to differentiate Npcap from WinPcap. And Npcap uses a very
small version like "0.07", which makes itself not welcomed by this
checking code.
Change-Id: I861e9decd123e7d30547789c0488043616b17032
Reviewed-on: https://code.wireshark.org/review/15304
Reviewed-by: Yang Luo <hsluoyz@gmail.com>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Make sure audio_stream_ is non-NULL before we try to use it. Delete
audio_stream_ more gracefully and add a note about mutexes on OS X and
Windows.
Bug: 12166
Change-Id: I12e76c49e631bc1de813c5c7d82c7d928c71237e
Reviewed-on: https://code.wireshark.org/review/15759
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add zoom in and zoom out actions. Changes only affect the X axis (the
spacing between the dashed lines).
Bug: 10693
Change-Id: I145e8501239f26e1be6135bffabdebec14f262c1
Reviewed-on: https://code.wireshark.org/review/15746
Reviewed-by: Gerald Combs <gerald@wireshark.org>