Make sure "-z multicast,stat[,filter]" and "-z wlan,stat[,filter]" work.
Add some missing "-z" items to the man page.
Try to fix some MSVC++ warnings.
Change-Id: Ie18e5355d595e351f000f14d82781dcdf33141c3
Reviewed-on: https://code.wireshark.org/review/10184
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Instead of splitting the stats into two lists as with the GTK+ UI, add
everything to an expandable tree. This allows viewing nodes on more than
one network.
Rename the top-level Bluetooth menu item to Wireless and put the WLAN
stats dialog there.
The Qt UI matches SSIDs (WlanNetworkTreeWidgetItem::isMatch) a bit
differently than the GTK+ UI. Try to make the logic as plain as possible
since we'll likely have to update it in the future.
The addition of a custom BSSID address types means that we can't assume
that everything is AT_ETHER. Add routines for checking for broadcast
BSSIDs and comparing only the data portions of addresses.
Move PercentBarDelegate into its own module. Use it in
WlanStatisticsDialog.
Change-Id: Ie4214eb00671a890871380c4a07213ebfb7585c6
Reviewed-on: https://code.wireshark.org/review/10171
Reviewed-by: Gerald Combs <gerald@wireshark.org>
When fields have changed the compiled display filter may be invalid
or need a recompile to be valid.
Filters which are not valid after a recompile is set to a filter
matching no packets (frame.number == 0) to indicate that this does
no longer match anything. We should probably have a better filter
matching no packet for this purpose.
Change-Id: Id27efa9f46e77e20df50d7366f26d5cada186f93
Reviewed-on: https://code.wireshark.org/review/10123
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Add the UDP multicast stream dialog. Abuse TapParameterDialog a bit more
so that we can edit parameters.
Remove some unused struct members and an unused function.
Change-Id: I962c70344e792f0959527e4bcba8a20bd7e8acf9
Reviewed-on: https://code.wireshark.org/review/10084
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Widgets using prefs must be closed because the prefs may have
been free'd when reloading Lua plugins.
Change-Id: I4b79b7aff18d7923c77a9eb05acadc29b156edbf
Reviewed-on: https://code.wireshark.org/review/10108
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
The columns must be recreated even if no capture file is loaded
because custom columns may have reference to deregistered fields.
Change-Id: I4ed7345b3200e5af211695f1a6511ee229d5f13c
Reviewed-on: https://code.wireshark.org/review/10076
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Changing fields in http, imf or ldap used to trigger redissect twice
because of UAT_AFFECTS_FIELDS and UAT_AFFECTS_DISSECTION.
Also changed from redrawVisiblePackets() to columnsChanged() because
fields in a custom column may have changed.
This also fixes reloading Lua plugins with Lua fields in custom columns.
Change-Id: I805a765690decbe7434dbf1c33ebd1113e23d16d
Reviewed-on: https://code.wireshark.org/review/10025
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Add RpcServiceResponseTimeDialog, which handles DCE-RPC and ONC-RPC
service response time statistics. Try to make it as lightweight as
possible, since we might want to pull this into the RPC dissectors
similar to the other SRT statistics.
Allow program names on the command line in place of numbers or UUIDs. Make
matches case-insensitive. E.g. the following are equivalent:
-z rpc,srt,100003,3
-z rpc,srt,nfs,3
-z rpc,srt,NFS,3
as are the following:
-z dcerpc,srt,f5cc5a18-4264-101a-8c59-08002b2f8426,56
-z dcerpc,srt,nspi,56
-z dcerpc,srt,NSPI,56
Change-Id: Ie451c64bf6fbc776f27d81e3bc248435c5cbc9e4
Reviewed-on: https://code.wireshark.org/review/9981
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
This is functions used when redissecting after a Lua plugins reload.
Change-Id: Ida14526faec1992006938a6732ee894ac83c2d12
Reviewed-on: https://code.wireshark.org/review/9995
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
This is initial support for reloading Lua plugins without
restarting the application.
Still todo:
- Deregister FileHandlers
- Support deregister ProtoField with existing abbrev (same_name_hfinfo)
- Add a progress dialog when reloading many plugins
- Search for memory leakages in wslua functions
Change-Id: I48870d8741251705ca15ffe1068613fcb0cb18c1
Reviewed-on: https://code.wireshark.org/review/5028
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Convert both the MAP statistics and summary. As with the GSM A stats
this are mostly untested.
Change-Id: Ibd3a7346b09d1401e78724c0197ec2a38deb97a3
Reviewed-on: https://code.wireshark.org/review/9883
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add the wiki and field reference items to the packet detail context
menu. Add the "Go To Linked Packet" item in the Go menu and packet
detail context menu. Use "Linked Packet" instead of "Packet Reference"
and "Corresponding Packet". Remove more pending item comments.
Change-Id: I66c40f71738f0996690f4818a546520ea0747088
Reviewed-on: https://code.wireshark.org/review/9841
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The OS X Human Interface Guidelines at
https://developer.apple.com/library/mac/documentation/UserExperience/Conceptual/OSXHIGuidelines/TerminologyWording.html#//apple_ref/doc/uid/20000957-CH15-SW3
says:
"Be sure to create the ellipsis character using the key combination
Option-; (Option-semicolon). This ensures that an assistive app can
provide the correct interpretation of the character to a disabled user.
If you use three period characters to simulate an ellipsis, many
assistive apps will be unable to make sense of them. Also, three period
characters and an ellipsis don't look the same because the periods are
spaced differently than the points of an ellipsis."
The Windows desktop applications guidelines has a section on ellipses:
https://msdn.microsoft.com/en-us/library/windows/desktop/dn742478.aspx
but doesn't specify the a single glyph vs three dots.
The GNOME HIG at
https://developer.gnome.org/hig/stable/typography.html.en
says "Take Advantage of Unicode" then specifically says to use U+2026
HORIZONTAL ELLIPSIS.
Remove the ellipsis from "Find Next" and "Find Previous". Neither
requires user interaction.
Change-Id: I0e6c28bb8b3a84b242731e2ca96f1a6f6f42c303
Reviewed-on: https://code.wireshark.org/review/9833
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add some missing items to the packet list and detail "Copy" context
menus. Don't nest the "Copy" items so deeply. Add YAML to the supported
summary formats.
Note that "Copy as Binary" copies to the clipboard as
application/octet-stream, which is a) arguably correct, and b) not very
useful. Fixes welcome.
Enable and disable packet detail context menu items from a set of
booleans similar to the packet list.
Change-Id: Iaa931c766aa476c33f27de089e5c4dbaf9ce74d6
Ping-Bug: 9320
Bug: 10831
Reviewed-on: https://code.wireshark.org/review/9825
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Enable and disable packet list-relasted menu items in one place. Add
"Colorize Conversation" items to the packet list context menu.
In the GTK+ UI we tend to disable entire menus, which makes their items
inaccessible. Try not to do that in the Qt UI so that menu items are
always visible even if they're disabled.
Remove commented items which are now complete.
Change-Id: I69b878b45334bf88014694b1bf016278fa55a94b
Reviewed-on: https://code.wireshark.org/review/9819
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add CaptureFile::delayedRetapPackets, which starts retapping after the
current batch of UI event are processed. Call it in the constructors of
various dialogs so that they are shown before tapping starts.
This *might* fix a crash found when following large streams from the
Conversations dialog.
Change-Id: If1b87491621ab7efcc0519f95891d34dcd9d18c1
Reviewed-on: https://code.wireshark.org/review/9818
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add logic to setMenusForSelectedPacket for setting the enabled states
for the "Apply As" and "Prepare A" actions. Update the PacketList
context menu code to fill in the right filter at the right time.
Exit out of setMenusForSelectedTreeRow if the packet list has focus so
that we don't clobber the enabled states of various actions.
Take the "Apply As" and "Prepare A" context menu titles from their main
window counterparts. Remove actionApply_as_Filter and
actionPrepare_a_Filter.
Remove completed to-do items.
Change-Id: I8f6f538bb7786d8df02a999f3b449dfde640e847
Reviewed-on: https://code.wireshark.org/review/9810
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
This dialog combines the "protocols" and heuristic dissectors (from GTK) into a single tree view where heuristic dissectors are children of their protocol.
Change-Id: I107656afd079c1d1c8a98161b736e4b4ad84f813
Reviewed-on: https://code.wireshark.org/review/9739
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Make it an editor frame instead of a dialog similar to the column editor
and prototocol preference editor.
Change-Id: If1a0cdf02dcab0eca98e8d39c94a3c2fe236df5a
Reviewed-on: https://code.wireshark.org/review/9743
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
HCI Summary dialogue collect HCI Opcodes, HCI Events, Hardware Errors,
Statuses and Reasons. Also show occurrence of them. The top level item
is group of items (by OGF or types), the second level item is in real
command, event, hardware error, status or reason. The third level items
are direct link to packet that contains second level item type.
Change-Id: I6b6bd02533c4605a2dd2c1f5dfee46f72a0f3fdc
Reviewed-on: https://code.wireshark.org/review/9676
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Combine the GTK+ RTP Stream Analysis and RTP Graph Analysis dialogs into
one. Yell at the user less. Disable the Analyze RTP Stream menu item if
we don't have an RTP stream selected.
There are a *lot* of moving parts in this dialog. I've tested with the
few RTP captures I have but it's by no means complete.
"To do" items are listed at the top of rtp_analysis.cpp.
Change-Id: Id503977f069bebc46cc68bc749f0c9cbf4d37bf6
Reviewed-on: https://code.wireshark.org/review/9650
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add a columnsChanged slot to PacketList and move the column update code
from redrawVisiblePackets there. Make sure we call
packet_list_model_->recreateVisibleRows, which should fix the behavior
described in bug 11324. Call columnsChanged when we, uh, change columns.
Add a sectionMoved slot to handle column reordering.
Don't rebuild the column list when we update the widgets in the column
preferences frame. Do enable and disable the "remove" button as needed.
Try to keep the user from removing all of the columns in both the packet
list and column preferences.
Left as an exercise for the reader: The GTK+ UI also fails when you
remove all of the columns via the preferences:
packet_list.c:377:packet_list_sort_column: assertion failed: (col)
Bug: 11324
Change-Id: Id58cf98e42cbda9aa2fc370ea06b8bcc6098c8ca
Reviewed-on: https://code.wireshark.org/review/9591
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Be less aggressive about resetting the packet list model so that we
retain our selection when (un)coloring packets or rebuilding columns.
Correctly enable a colorization menu item while we're here.
Change-Id: I8d1c8f26dbb8a814b8344b609695b77632006e4b
Reviewed-on: https://code.wireshark.org/review/9608
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add the "View→Colorize Conversation" menu similar to the GTK+ UI. Add
the "Reset" item under the "Colorize Conversation" menu instead of the
top-level "View" menu. Make sure the "Reset" shortcut is Ctrl+Space even
on OS X. Normally Qt would convert it to Cmd+Space, but that's used by
Spotlight.
Add StockIcon::colorIcon and use it to create filled square icons.
Change-Id: I2af9e26d025cdaf97482422bbb9440e28e18d1ac
Reviewed-on: https://code.wireshark.org/review/9595
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The GTK+ equivalent is named "Address Resolution" but "Resolved
Addresses" seemed (to me at least) to be more clear.
Change-Id: I1806354d91bb5ce8af11d20568b92a04c78d4d73
Reviewed-on: https://code.wireshark.org/review/9580
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add ServiceResponseTimeDialog as a subclass of TapParameterDialog,
similar to StatsTreeDialog. Add initial plumbing for statistics menu
items and command line invocation.
Don't append "..." to menu item names. Don't add menu icons. In each
case this avoids repetitive UI clutter.
Change-Id: I463b95c93090160bb81d2e80b16aad389dc0bd6c
Reviewed-on: https://code.wireshark.org/review/8864
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
if we're not capturing to multiple files
Change-Id: I18d36ef8e7e3525b2bd8d94f2b2349cefa3ecb52
Reviewed-on: https://code.wireshark.org/review/9161
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Reviewed-by: Martin Kaiser <wireshark@kaiser.cx>
this should make Visual Studio pick up the generated include files
from the build directory instead of the source directory (which may
contain lefovers from an in-tree build)
Change-Id: Ie3de4cdd85a2865e203118a42ab10f443372f03b
Reviewed-on: https://code.wireshark.org/review/9129
Petri-Dish: Martin Kaiser <wireshark@kaiser.cx>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
As in gcc614a9 we have to manually uncheck buttons if we decide not to action
them.
Change-Id: Ia5dc29a292bc6d75a1e8753da06a053cafa66866
Reviewed-on: https://code.wireshark.org/review/9107
Reviewed-by: Evan Huus <eapache@gmail.com>
If the user decides not to capture after all, by hitting cancel when prompted
for their unsaved changes, we have to manually uncheck the button again because
Qt helpfully checks it for us.
Bug: 11145
Change-Id: I362d72787ddb138d382a899d091698c6652eebb2
Reviewed-on: https://code.wireshark.org/review/9102
Reviewed-by: Evan Huus <eapache@gmail.com>
don't do the switch when the capture can't be started
(e.g. because we didn't select any interface from which to capture)
Change-Id: Ibabd703863d546c95b9fbe9bd2280d67a22dfc26
Reviewed-on: https://code.wireshark.org/review/9072
Reviewed-by: Martin Kaiser <wireshark@kaiser.cx>
... we go back to the main welcome screen like we do in GTK
Change-Id: I64ef29665af61da55c1971ca59d1fab25d205874
Reviewed-on: https://code.wireshark.org/review/9071
Reviewed-by: Martin Kaiser <wireshark@kaiser.cx>
Switch from a plain QProgressBar to a QFrame with a QProgressBar and a
stop button.
Add a stop_flag boolean to the capture_file struct.
To do:
- Start adding the progress bar to dialogs.
- Don't complain so loudly when the user stops a capture.
Change-Id: Iedd1d7d79f2044f1a53e4fb22186d25930a3ef03
Reviewed-on: https://code.wireshark.org/review/9029
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
This replaces the single preference editor dialog in the GTK+ UI.
Change-Id: I10e030981e9f7d1ec121811593586b65cf0797c5
Reviewed-on: https://code.wireshark.org/review/8966
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
By default QMainWindow::createPopupMenu shows a checkable list of
toolbars which aren't synced with our actions under the View menu.
Replace it with a version that handles all the main window widgets.
Change-Id: I5f5c23880133e97e815d3bbbf19ea3bacc482096
Reviewed-on: https://code.wireshark.org/review/8958
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Please found it under Bluetooth menu. It shows all devices found
in logs, not only connected, all that its address can be found in
logs. Show if device is local (in most cases: capturing on it side)
and manufacturer and LMP version what should answer the question what
version of Bluetooth is used by Bluetooth device chip.
Also firmware version.
Change-Id: I32e3b7100cdebcaa850b6541de0ab89dff41c0e1
Reviewed-on: https://code.wireshark.org/review/8901
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Tested-by: Michal Labedzki <michal.labedzki@tieto.com>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Most of the time you intend to go to a new packet, not to go to the previously selected one.
This makes it consistent with all the editors I have used so far.
Change-Id: Ib0cde3c8361a8c3103dd05d622eaba4ee7deab78
Reviewed-on: https://code.wireshark.org/review/8772
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Use a single overloaded dialog, similar to the GTK+ UI.
Change-Id: If85db14a7101770f115bef725f5145e0010c518d
Reviewed-on: https://code.wireshark.org/review/8776
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Changes from the GTK+ UI:
- The display filter is built on the fly with immediate syntax feedback.
- Slightly different layout.
- You can search for fields.
Make the plain SyntaxLineEdit a bit more plain.
Bug: 11128
Change-Id: I06a48cd7b9ba7b9dc193b0199540aede4eb62fa7
Reviewed-on: https://code.wireshark.org/review/8742
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Plumb in more capture file callbacks. Add common functions for setting
the status bar file information. Add and update code to match the GTK+
status bar behavior.
Make sure we update the capture file length when rescanning.
Bug: 10943
Change-Id: Ie84c7a57ee421d57ba3477f8dde3847aaafa1cd1
Reviewed-on: https://code.wireshark.org/review/8594
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Rename "stay_closed" to "dont_reopen" to match cf_save_records and its
GTK+ equivalent. Set "dont_reopen" to FALSE when we "Save As", otherwise
we crash on Windows.
Bug: 10904
Change-Id: I4bb10abc230439e10cc55ffbd5595bfbc0a34b6f
Reviewed-on: https://code.wireshark.org/review/8592
Reviewed-by: Gerald Combs <gerald@wireshark.org>