Change access of all_ifaces elements from by val to by reference.
With this change unnecessary copying of the whole struct is avoided
but even more important is that elements no longer have to be
removed and inserted whenever data is updated.
This change aims to make it more clear that all_ifaces elements
shall never be removed from the array without freeing resources
via the capture_opts_free_interface_t function.
NOTE: Code for GTK UI not updated
Ping-Bug: 13864
Change-Id: I36742cb1d5c8daa136c9d3732a044a7c8e5c7fe7
Reviewed-on: https://code.wireshark.org/review/23201
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Use WTAP_MAX_PACKET_SIZE_STANDARD, set to 256KB, for everything except
for D-Bus captures. Use WTAP_MAX_PACKET_SIZE_DBUS, set to 128MB, for
them, because that's the largest possible D-Bus message size. See
https://bugs.freedesktop.org/show_bug.cgi?id=100220
for an example of the problems caused by limiting the snapshot length to
256KB for D-Bus.
Have a snapshot length of 0 in a capture_file structure mean "there is
no snapshot length for the file"; we don't need the has_snap field in
that case, a value of 0 mean "no, we don't have a snapshot length".
In dumpcap, start out with a pipe buffer size of 2KB, and grow it as
necessary. When checking for a too-big packet from a pipe, check
against the appropriate maximum - 128MB for DLT_DBUS, 256KB for
everything else.
Change-Id: Ib2ce7a0cf37b971fbc0318024fd011e18add8b20
Reviewed-on: https://code.wireshark.org/review/21952
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This is most likely due to WinPcap not being installed.
Bug: 13672
Change-Id: Ic7069f98c7f8068cdc5045204c2e23ab56b3f7eb
Reviewed-on: https://code.wireshark.org/review/21757
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Don't try to compile code that uses pcap if you don't have it.
Change-Id: Ifa98b4ff47783f5347cb6e1129bbf4e5cac35aab
Reviewed-on: https://code.wireshark.org/review/21611
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Have a header file that defines HAVE_REMOTE if HAVE_PCAP_REMOTE is
defined, and then includes pcap.h. Replace all other includes of
pcap.h, and the definition of HAVE_REMOTE, with includes of that file.
Check for anything other than wspcap.h including pcap.h in checkAPIs.pl.
Change-Id: I3cbee8208944ad6f006f568b3fe3134e10b2a883
Reviewed-on: https://code.wireshark.org/review/21605
Reviewed-by: Guy Harris <guy@alum.mit.edu>
WinPcap made the mistake of having stuff in its public header fines
depend on a configuration #define, HAVE_REMOTE; this means that we need
to forcibly define it when building with remote capture support.
The tip of the libpcap master branch does not have that botch; hopefully
future versions of libpcap-for-Windows will be based on that libpcap and
thus lack that botch as well.
Defining HAVE_REMOTE in config.h is not the right fix, as it makes it
look like a *Wireshark* configuration option that code in Wireshark
should test, rather than a *WinPcap* configuration option that the
pcap.h that ships with the WinPcap SDK should have been changed, as part
of the build process, to correctly define or not, so that users of
WinPcap don't have to define it themselves.
Change-Id: I62d1eca6d3c900d0dcc9fbc011db77f595a86313
Reviewed-on: https://code.wireshark.org/review/21593
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add GeometryStateDialog class to handle load and save dialog geometry.
The QDialog class name will be used as window name. For shared
classes the UAT name or the statistics title or abbr will be used.
Change-Id: I5a019598307fb3861518f41e733de834788184d8
Reviewed-on: https://code.wireshark.org/review/14139
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
HT tab stops are set every 8 spaces on UN*X; UN*X tools that treat an HT
character as tabbing to 4-space tab stops, or that even are configurable
but *default* to 4-space tab stops (I'm looking at *you*, Xcode!) are
broken. tab-width: 4, tabstop=4, and tabSize=4 are errors if you ever
expect anybody to look at your file with a UN*X tool, and every text
file will probably be looked at by a UN*X tool at some point, so Don't
Do That.
Adjust indentation to reflect the mode lines.
Change-Id: Icf0831717de10fc615971fa1cf75af2f1ea2d03d
Reviewed-on: https://code.wireshark.org/review/14150
Reviewed-by: Guy Harris <guy@alum.mit.edu>
this should make Visual Studio pick up the generated include files
from the build directory instead of the source directory (which may
contain lefovers from an in-tree build)
Change-Id: Ie3de4cdd85a2865e203118a42ab10f443372f03b
Reviewed-on: https://code.wireshark.org/review/9129
Petri-Dish: Martin Kaiser <wireshark@kaiser.cx>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Even though Qt's widget naming suggests otherwise, a QTreeWidget is
usually a better choice for tables than QTableWidget. The former gives
you a nice, clean Plain Old Table while the latter gives you something
that looks and acts like a spreadsheet.
In this particular instance using QTreeWidget also gives us the option
of adding sub-items with detailed information. Do so for attached
addresses.
Allow sorting by traffic while we're here. Simplify the column hiding
logic. Make sure the sparkline delegate isn't editable.
Change-Id: Ia36ba2e12c1c0cb86ae5b2154e6afcf6549ae049
Reviewed-on: https://code.wireshark.org/review/3466
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Tested-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Apply a layout to the "Compiled Filter Output" dialog. Render the filter
as monospaced text.
Don't add an "expert OK" icon to the list. It doesn't seem to indicate
any sort of status.
Use a "Close" button instead of "OK". According to
http://uxmovement.com/buttons/why-the-ok-button-is-no-longer-okay/
"OK" implies we're going to perform some sort of action.
Add a "Copy" button while we're here.
Change-Id: Ia63f3032916e322fa9f4f2d465140b128b4f8078
Reviewed-on: https://code.wireshark.org/review/3338
Reviewed-by: Gerald Combs <gerald@wireshark.org>
- allow to change the interface options in the table
- save the options to preferences when the dialog is left
- add a field for setting a capture filter for all selected interfaces
- add a "Compile BPF" button and a window to show the compiled filter output
- try to address Alexis' and Evan's comments
Change-Id: Ic1272e29183ec80e2d2f4b3e494c79dabe2c3b6f
Reviewed-on: https://code.wireshark.org/review/1946
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Dario Lombardo