The first is deprecated, as per https://spdx.org/licenses/.
Change-Id: I8e21e1d32d09b8b94b93a2dc9fbdde5ffeba6bed
Reviewed-on: https://code.wireshark.org/review/25661
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Instead, just:
assume a file with the regular pcap magic number is a regular pcap
file, not an unhelpfully-modified-without-changing-the-magic-number
format such as one of the (fortunately, short-lived) memory-mapped
capture formats or the Nokia format;
reject a file with the memory-mapped-capture-finally-changed-the-
magic-number magic number, as they then changed the *new* format
without changing its magic number;
and don't even leave a provision for multiple formats using the
"nanosecond pcap" magic number - not even when reading from a file -
so we can punish bad behavior (which is what changing the format
without changing the magic number is).
This should get rid of the last place where, when reading a pcap file
from a pipe, the first packet isn't displayed as soon as it arrives.
Bug: 14345
Change-Id: I2fcb3354dc84cdd2d8ec749a0db883e56971c4b4
Reviewed-on: https://code.wireshark.org/review/25383
Reviewed-by: Guy Harris <guy@alum.mit.edu>
IXIA^WKeysight Technologies's vitual IxNetwork version 8.30 will
create capture files in a modified format: It uses a different magic
and adds the total size of all records, i.e. the filesize minus the
headersize. Add support for this.
v2: Different file types use different magic numbers.
Not yet tested/supported: The default fileending is .lcap
Bug: 14073
Change-Id: Ida90b188ca66a78ff22dca237e4fd6b22e02dc14
Reviewed-on: https://code.wireshark.org/review/23614
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
In change 18a3b0659c, I moved the table
that uses it, but not the actual definition, from libpcap.c to
pcap-common.c; they both should have been moved. Make it so.
Change-Id: I266fce455df3848b873cdfadb12cecdbf9c8d4d3
Reviewed-on: https://code.wireshark.org/review/22216
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Use WTAP_MAX_PACKET_SIZE_STANDARD, set to 256KB, for everything except
for D-Bus captures. Use WTAP_MAX_PACKET_SIZE_DBUS, set to 128MB, for
them, because that's the largest possible D-Bus message size. See
https://bugs.freedesktop.org/show_bug.cgi?id=100220
for an example of the problems caused by limiting the snapshot length to
256KB for D-Bus.
Have a snapshot length of 0 in a capture_file structure mean "there is
no snapshot length for the file"; we don't need the has_snap field in
that case, a value of 0 mean "no, we don't have a snapshot length".
In dumpcap, start out with a pipe buffer size of 2KB, and grow it as
necessary. When checking for a too-big packet from a pipe, check
against the appropriate maximum - 128MB for DLT_DBUS, 256KB for
everything else.
Change-Id: Ib2ce7a0cf37b971fbc0318024fd011e18add8b20
Reviewed-on: https://code.wireshark.org/review/21952
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
The only place the time stamp precision is used is in the libpcap code,
where it determines whether to write out microsecond-precision or
nanosecond-precision time stamps; we can determine that by looking at
the type/subtype field, which is also part of that structure, so do
that.
We weren't setting it consistently - we were only setting it in libpcap
and a few other capture file writers, and not in other capture file
writers - and none of the writers other than libpcap used it.
Change-Id: If53779cf4823ca936b8bf3e8a7dbcfea5850e652
Reviewed-on: https://code.wireshark.org/review/21171
Reviewed-by: Guy Harris <guy@alum.mit.edu>
If the seek forward is just skipping record content that's not
(currently) interesting, use wtap_read_bytes() with a null buffer
pointer; it catches short "reads" and requires less seeking, so it may
work better when reading from a pipe.
Change-Id: Ifb07d20e0391a8ed97da85149d971b4e9ef093a8
Reviewed-on: https://code.wireshark.org/review/17976
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Allow file_read() to take a null pointer as a buffer argument; a null
argument means "do everything except copy the bytes from the file to the
user buffer". That means that wtap_read_bytes() and
wtap_read_bytes_or_eof() also support a null pointer as a buffer
argument.
Use wtap_read_bytes() with a null buffer argument rather than
file_skip() to skip forward over data.
This fixes some places where files were mis-identified as ERF files, as
the ERF open heuristics now get a short "read" error if they try to skip
over more bytes than exist in the file.
Change-Id: I4f73499d877c1f582e2bcf9b045034880cb09622
Reviewed-on: https://code.wireshark.org/review/17974
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add encap_priv pointer to libpcap_t.
Initialize erf_priv when ENCAP_ERF.
Use erf_populate_interface_from_header() to dynamically create interfaces.
Free encap_priv on pcap_close.
Ping-Bug: 12303
Change-Id: Ieda425ef3e50a124d9c38ee4538aa3644128ce60
Reviewed-on: https://code.wireshark.org/review/15362
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
It doesn't actually *close* any handle, so it's best called a "finish"
routine rather than a "close" routine.
In libwiretap modules, don't bother setting the finish routine pointer
to null - it's already initialized to null (it's probably best not to
require modules to set it).
Change-Id: I19554f3fb826db495f17b36600ae36222cbc21b0
Reviewed-on: https://code.wireshark.org/review/11659
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That indicates that it's a problem specific to *writing* capture files;
we've already converted some errors to that style, and added a new one
in that style.
Change-Id: I8268316fd8b1a9e301bf09ae970b4b1fbcb35c9d
Reviewed-on: https://code.wireshark.org/review/5826
Reviewed-by: Guy Harris <guy@alum.mit.edu>
For cases where record (meta)data is something that can't be written out
in a particular file format, return WTAP_ERR_UNWRITABLE_REC_DATA along
with an err_info string.
Report (and free) that err_info string in cases where
WTAP_ERR_UNWRITABLE_REC_DATA is returned.
Clean up some other error reporting cases, and flag with an XXX some
cases where we aren't reporting errors at all, while we're at it.
Change-Id: I91d02093af0d42c24ec4634c2c773b30f3d39ab3
Reviewed-on: https://code.wireshark.org/review/5823
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That makes it clearer what the problem is, and that it should only be
returned by the dump code path, not by the read code path.
Change-Id: I22d407efe3ae9fba7aa25f08f050317549866442
Reviewed-on: https://code.wireshark.org/review/5798
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That makes it clearer what the problem is, and that it should only be
returned by the dump code path, not by the read code path.
Change-Id: Icc5c9cff43be6c073f0467607555fa7138c5d074
Reviewed-on: https://code.wireshark.org/review/5797
Reviewed-by: Guy Harris <guy@alum.mit.edu>
WTAP_ERR_UNSUPPORTED_ENCAP means "I can't *write* that particular
encapsulation type to a file of this format", which mainly means "that
file format simply can't handle packets of that type";
WTAP_ERR_UNSUPPORTED means "this file can't currently be supported by
Wireshark, as there's some feature in the file - such as a file or
per-packet encapsulation type - that we don't (yet) handle".
Change-Id: I53cadf9913d20efb2bccb29f61877b71d53807be
Reviewed-on: https://code.wireshark.org/review/5794
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Clean up some things we ran across while making those changes.
Change-Id: Ic0d8943d36e6e120d7af0a6148fad98015d1e83e
Reviewed-on: https://code.wireshark.org/review/4581
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Unlike the standard I/O routines, the code we introduced that supports
fast random seeking on gzipped files will always supply some specific
error code for read errors, so we don't need WTAP_ERR_CANT_READ.
Add WTAP_ERR_CANT_WRITE for writing, as we're still using the standard
I/O routines for that. Set errno to WTAP_ERR_CANT_WRITE before calling
fwrite() in wtap_dump_file_write(), so that it's used if fwrite() fails
without setting errno.
Change-Id: I6bf066a6838284a532737aa65fd0c9bb3639ad63
Reviewed-on: https://code.wireshark.org/review/4540
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add wtap_read_bytes(), which takes a FILE_T, a pointer, a byte count, an
error number pointer, and an error string pointer as arguments, and that
treats a short read of any sort, including a read that returns 0 bytes,
as a WTAP_ERR_SHORT_READ error, and that returns the error number and
string through its last two arguments.
Add wtap_read_bytes_or_eof(), which is similar, but that treats a read
that returns 0 bytes as an EOF, supplying an error number of 0 as an EOF
indication.
Use those in file readers; that simplifies the code and makes it less
likely that somebody will fail to supply the error number and error
string on a file read error.
Change-Id: Ia5dba2a6f81151e87b614461349d611cffc16210
Reviewed-on: https://code.wireshark.org/review/4512
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Pcap-ng files don't have a per-file time stamp resolution, they have a
per-interface time stamp resolution. Add new time stamp resolution
types of "unknown" and "per-packet", add the time stamp resolution to
struct wtap_pkthdr, have the libwiretap core initialize it to the
per-file time stamp resolution, and have pcap-ng do the same thing with
the resolution that it does with the packet encapsulation.
Get rid of the TS_PREC_AUTO_XXX values; just have TS_PREC_AUTO, which
means "use the packet's resolution to determine how many significant
digits to display". Rename all the WTAP_FILE_TSPREC_XXX values to
WTAP_TSPREC_XXX, as they're also used for per-packet values.
Change-Id: If9fd8f799b19836a5104aaa0870a951498886c69
Reviewed-on: https://code.wireshark.org/review/4349
Reviewed-by: Guy Harris <guy@alum.mit.edu>
If it fails due to, for example, the file being gzipped and having a bad
gzip CRC, the error returned is WTAP_ERR_DECOMPRESS and, for that error,
err_info is expected to be set to a string giving details of the
problem, so we need to pass back to our caller the string in question.
Bug: 10484
Change-Id: I3aa2a92d04fcc08946ff073a40efa708079bbb3e
Reviewed-on: https://code.wireshark.org/review/4201
Reviewed-by: Guy Harris <guy@alum.mit.edu>
When trying to guess what type of capture a file is, look for as many
bogosities (caplen > len, microseconds >= 10^6/nanoseconds >= 10^9,
too-high caplen, too-high original len, caplen > snapshort length), to
increase the chances of guessing correctly.
(Every time somebody uses 0xa1b2c3d4 as the magic number for a capture
file that isn't standard pcap format, God kills a kitten. Please, think
of the kittens.)
Change-Id: I3f397d598ed61dc82e2832be30452ebe8ace98e8
Reviewed-on: https://code.wireshark.org/review/3808
Reviewed-by: Guy Harris <guy@alum.mit.edu>
In particular, epan/wslua/lrexlib.c has its own buffer_ routines,
causing some linker warnings on some platforms, as reported in bug
10332.
(Not to be backported to 1.12, as that would change the API and ABI of
libwsutil and libwiretap. We should also make the buffer_ routines in
epan/wslua/lrexlib.c static, which should also address this problem, but
the name change avoids other potential namespace collisions.)
Change-Id: I1d42c7d1778c7e4c019deb2608d476c52001ce28
Reviewed-on: https://code.wireshark.org/review/3351
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Otherwise, if you link with both libwiretap and libfiletap, it's
anybody's guess which one you get. That means you're wasting memory
with two copies of its routines if they're identical, and means
surprising behavior if they're not (which showed up when I was debugging
a double-free crash - fixing libwiretap's buffer_free() didn't fix the
problem, because Wireshark happened to be calling libfiletap' unfixed
buffer_free()).
There's nothing *tap-specific about Buffers, anyway, so it really
belongs in wsutil.
Change-Id: I91537e46917e91277981f8f3365a2c0873152870
Reviewed-on: https://code.wireshark.org/review/3066
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Also, make the block of code containing that comment intended
consistently with spaces.
Change-Id: I8e8eb346833662f15c53ece5869b12cc430bad11
Reviewed-on: https://code.wireshark.org/review/2661
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add a "record type" field to "struct wtap_pkthdr"; currently, it can be
REC_TYPE_PACKET, for a record containing a packet, or
REC_TYPE_FILE_TYPE_SPECIFIC, for records containing file-type-specific
data.
Modify code that reads packets to be able to handle non-packet records,
even if that just means ignoring them.
Rename some routines to indicate that they handle more than just
packets.
We don't yet have any libwiretap code that supplies records other than
REC_TYPE_PACKET or that supporting writing records other than
REC_TYPE_PACKET, or any code to support plugins for handling
REC_TYPE_FILE_TYPE_SPECIFIC records; this is just the first step for bug
8590.
Change-Id: Idb40b78f17c2c3aea72031bcd252abf9bc11c813
Reviewed-on: https://code.wireshark.org/review/1773
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This reverts commit c0c480d08c.
A better way to do this is to have the record type be part of struct wtap_pkthdr; that keeps the metadata for the record together and requires fewer API changes. That is in-progress.
Change-Id: Ic558f163a48e2c6d0df7f55e81a35a5e24b53bc6
Reviewed-on: https://code.wireshark.org/review/1741
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This is the first step towards implementing the mechanisms requestd in
bug 8590; currently, we don't return any records other than packet
records from libwiretap, and just ignore non-packet records in the rest
of Wireshark, but this at least gets the ball rolling.
Change-Id: I34a45b54dd361f69fdad1a758d8ca4f42d67d574
Reviewed-on: https://code.wireshark.org/review/1736
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This reverts commit 1abeb277f5.
This isn't building, and looks as if it requires significant work to fix.
Change-Id: I622b1bb243e353e874883a302ab419532b7601f2
Reviewed-on: https://code.wireshark.org/review/1568
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Start of refactoring Wiretap and breaking structures down into "generally useful fields for dissection" and "capture specific". Since this in intended as a "base" for Wiretap and Filetap, the "wft" prefix is used for "common" functionality.
The "architectural" changes can be found in cfile.h, wtap.h, wtap-int.h and (new file) wftap-int.h. Most of the other (painstaking) changes were really just the result of compiling those new architecture changes.
bug:9607
Change-Id: Ife858a61760d7a8a03be073546c0e7e582cab2ae
Reviewed-on: https://code.wireshark.org/review/1485
Reviewed-by: Michael Mann <mmann78@netscape.net>
(Using sed : sed -i '/^ \* \$Id\$/,+1 d')
Fix manually some typo (in export_object_dicom.c and crc16-plain.c)
Change-Id: I4c1ae68d1c4afeace8cb195b53c715cf9e1227a8
Reviewed-on: https://code.wireshark.org/review/497
Reviewed-by: Anders Broman <a.broman58@gmail.com>
For some routines that take multiple arguments that come from a struct
wtap_pkthdr, pass a pointer to the struct wtap_pkthdr in question,
rather than the separate arguments. Do this even if we're passing
expressions that were earlier assigned to the struct wtap_pkthdr fields
in question. This simplifies the calling sequences and ensures that the
right values are picked up by the called routine; in at least one case
we were *not* passing the right values (the code to handle Simple Packet
Blocks in pcap-ng files).
Also, call the byte-swapping routines for pseudo-header fields only if
we need to do byte-swapping.
Change-Id: I3a8badfcfeb0237dfc1d1014185a67f18c0f2ebe
Reviewed-on: https://code.wireshark.org/review/119
Reviewed-by: Evan Huus <eapache@gmail.com>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
willing to read or that's bigger than will fit in the file format;
instead, report an error.
For the "I can't write a packet of that type in that file type" error,
report the file type in question.
svn path=/trunk/; revision=54882
heuristic cases broken in r49999 when we permitted packets > 64KB, since that
relaxed so severely the definition of a valid packet header.
64MB is an arbitrary and perhaps suboptimal number, but it seems to do the right
thing in all the examples I have handy.
Fixes https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=9634
svn path=/trunk/; revision=54812
XXX, people are not aware that expression of this macros might be evaluated multiple times, like:
- BSWAP16(tvb_get_letohs(tvb, off)) : \
+ GUINT16_SWAP_LE_BE(tvb_get_letohs(tvb, off)) : \
Should be tvb_get_ntohs() called?
svn path=/trunk/; revision=53653
subtypes, e.g. Network Monitor version 1 and Network Monitor version 2
are separate "file types", even though they both come from Network
Monitor.
Rename various functions, #defines, and variables appropriately.
svn path=/trunk/; revision=53166
out there (especially over USB) and we should be able to load them as long as
they are snapped to a sane length.
Also validate that packets do not specify a snapshot length larger than the one
in the file header, though only make it a warning, as this is not necessarily a
fatally corrupt packet.
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=8808
svn path=/trunk/; revision=49999
as the "where to put the packet data" argument.
This lets more of the libwiretap code be common between the read and
seek-read code paths, and also allows for more flexibility in the "fill
in the data" path - we can expand the buffer as needed in both cases.
svn path=/trunk/; revision=49949
routines are passed a separate struct wtap_pkthdr to be filled in.
Get rid of the pseudo_header member of the wblock structure - the
pseudo-header is part of the struct wtap_pkthdr.
Get rid of the union wtap_pseudo_header * argument to
pcap_process_pseudo_header() - it's passed a pointer to a struct
pcap_pkthdr, and that structure contains the union in question.
Have libpcap_read_header() take a FILE_T argument, rather than using
only the "sequential" handle of the wtap it's handed. Have the libpcap
read routine return the offset of the beginning of the pcap record, and
have the seek-read routine read the header and fill in the struct
wtap_pkthdr handed to it.
svn path=/trunk/; revision=49401
leads to a double-free in wtap_close. Fix all the instances I found via
manual code review, and add a brief comment to the list of open routines in
file_access.c
Fixes https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=8518
svn path=/trunk/; revision=48552
wtap_file_read_expected_bytes() from an open routine - open routines are
supposed to return -1 on error, 0 if the file doesn't appear to be a
file of the specified type, or 1 if the file does appear to be a file of
the specified type, but those macros will cause the caller to return
FALSE on errors (so that, even if there's an I/O error, it reports "the
file isn't a file of the specified type" rather than "we got an error
trying to read the file").
When doing reads in an open routine before we've concluded that the file
is probably of the right type, return 0, rather than -1, if we get
WTAP_ERR_SHORT_READ - if we don't have enough data to check whether a
file is of a given type, we should keep trying other types, not give up.
For reads done *after* we've concluded the file is probably of the right
type, if a read doesn't return the number of bytes we asked for, but
returns an error of 0, return WTAP_ERR_SHORT_READ - the file is
apparently cut short.
For NetMon and NetXRay/Windows Sniffer files, use a #define for the
magic number size, and use that for both magic numbers.
svn path=/trunk/; revision=46803
Dario Lombardo