DLT_HDLC to it.
Make a separate dissector for Cisco HDLC, and add a dissector for Cisco
SLARP. Have the PPP dissector call the Cisco HDLC dissector if the
address field is the Cisco HDLC unicast or multicast address. Use the
Cisco HDLC dissector for the Cisco HDLC Wiretap encapsulation type.
Add a new dissector table "chdlctype", for Cisco HDLC packet types
(they're *almost* the same as Ethernet types, but 0x8035 is SLARP, not
Reverse ARP, and 0x2000 is the Cisco Discovery protocol, for example),
replacing "fr.chdlc".
Have a "chdlctype()" routine, similar to "ethertype()", used both by the
Cisco HDLC and Frame Relay dissectors. Have a "chdlc_vals[]"
"value_string" table for Cisco HDLC types and protocol names. Split the
packet type field in the Frame Relay dissector into separate SNAP and
Cisco HDLC fields, and give them the Ethernet type and Cisco HDLC type
"value_string" tables, respectively.
svn path=/trunk/; revision=3133
statements.
Move the setting of the Protocol column in various dissectors before
anything is fetched from the packet, and also clear the Info column at
that point in those and some other dissectors, so that if an exception
is thrown, the columns don't reflect the previous protocol.
Make the IP dissector static, as it's called only via dissector tables
or dissector handles. Also make the "dissect the TOS field as the
DiffServ DS field" flag static, as it's not referred to outside of
"packet-ip.c".
In the NCP dissector, refer to the port type through "pinfo" rather than
through the global "pi", as it's a tvbuffified dissector.
svn path=/trunk/; revision=2929
"{old_}heur_dissector_add()", "{old_}conv_dissector_add()", and
"register_dissector()", so that an entry in those tables has associated
with it the protocol index of the protocol the dissector handles (or -1,
if there is no protocol index for it).
This is for future use in a number of places.
(Arguably, "proto_register_protocol()" should take a dissector pointer
as an argument, but
1) it'd have to handle both regular and heuristic dissectors;
2) making it take either a "dissector_t" or a union of that and
a "heur_dissector_t" introduces some painful header-file
interdependencies
so I'm punting on that for now. As with other Ethereal internal APIs,
these APIs are subject to change in the future, at least until Ethereal
1.0 comes out....)
svn path=/trunk/; revision=2849
protocols, in addition to adding structures to the list of filterable
fields. Give it an extra argument that specifies a "short name" for the
protocol, for use in such places as
pinfo->current_proto;
the dialog box for constructing filters;
the preferences tab for the protocol;
and so on (although we're not yet using it in all those places).
Make the preference name that appears in the preferences file and the
command line for the DIAMETER protocol "diameter", not "Diameter"; the
convention is that the name in question be all-lower-case.
Make some routines and variables that aren't exported static.
Update a comment in the ICP dissector to make it clear that the
dissector won't see fragments other than the first fragment of a
fragmented datagram.
svn path=/trunk/; revision=2810
can be put, and a pointer to the string for the column, which might or
might not point to that buffer.
Add a routine "col_set_str()", which sets the string for the column to
the string passed to it as an argument; it should only be handed a
static string (a string constant would be ideal). It doesn't do any
copying, so it's faster than "col_add_str()".
Make the routines that append to columns check whether the pointer to
the string for the column points to the buffer for the column and, if
not, copy the string for the column to the buffer for the column so that
you can append to it (so you can use "col_set_str()" and then use
"col_append_str()" or "col_append_fstr()").
Convert a bunch of "col_add_str()" calls that take a string constant as
an argument to "col_set_str()" calls.
Convert some "col_add_fstr()" calls that take a string constant as the
only argument - i.e., the format string doesn't have any "%" slots into
which to put strings for subsequent arguments to "col_set_str()" calls
(those calls are just like "col_add_str()" calls).
Replace an END_OF_FRAME reference in a tvbuffified dissector with a
"tvb_length(tvb)" call.
svn path=/trunk/; revision=2670
the BSD AF_ type values it uses into an "aftypes.h" header file for
dissectors that register themselves in that dissector table include.
svn path=/trunk/; revision=2653
dissector call it through a handle, and make it static.
Give "dissect_data()" an "offset" argument, so dissectors can use it to
dissect part of the packet without having to cook up a new tvbuff.
Go back to using "dissect_data()" to dissect the data in an IPP request.
svn path=/trunk/; revision=2651
Dissect RTMP requests, as well as RTMP data packets.
Call it "Routing Table Maintenance Protocol", not just "Routing Table".
Print unsigned quantities with "%u", not "%d".
Correctly handle extended vs. non-extended networks in RTMP data
packets, as per *Inside AppleTalk(R), Second Edition*.
svn path=/trunk/; revision=2627
big-endian and little-endian platforms; just put "ddp.hops_len" in host
byte order and have one version. (This removes one usage of BIG_ENDIAN
and LITTLE_ENDIAN from Ethereal - our redefining of them causes warnings
on FreeBSD 3.4, so I'd like not to export them to all the dissectors if
possible - and also fixes "ddp_hops()" to work correctly on
little-endian machines, as the little-endian version wasn't
byte-swapping its argument.)
svn path=/trunk/; revision=2609
the following:
It is now possible to enable/disable a particular protocol decoding
(i.e. the protocol dissector is void or not). When a protocol
is disabled, it is displayed as Data and of course, all linked
sub-protocols are disabled as well.
Disabling a protocol could be interesting:
- in case of buggy dissectors
- in case of wrong heuristics
- for performance reasons
- to decode the data as another protocol (TODO)
Currently (if I am not wrong), all dissectors but NFS can be disabled
(and dissectors that do not register protocols :-)
I do not like the way the RPC sub-dissectors are disabled (in the
sub-dissectors) since this could be done in the RPC dissector itself,
knowing the sub-protocol hfinfo entry (this is why, I've not modified
the NFS one yet).
Two functions are added in proto.c :
gboolean proto_is_protocol_enabled(int n);
void proto_set_decoding(int n, gboolean enabled);
and two MACROs which can be used in dissectors:
OLD_CHECK_DISPLAY_AS_DATA(index, pd, offset, fd, tree)
CHECK_DISPLAY_AS_DATA(index, tvb, pinfo, tree)
See also the XXX in proto_dlg.c and proto.c around the new functions.
svn path=/trunk/; revision=2267
dissectors to be registered as dissectors for particular ports,
registered as heuristic dissectors, and registered as dissectors for
conversations, and have routines to be used both by old-style and
new-style dissectors to call registered dissectors.
Have the code that calls those dissectors translate the arguments as
necessary. (For conversation dissectors, replace
"find_conversation_dissector()", which just returns a pointer to the
dissector, with "old_try_conversation_dissector()" and
"try_conversation_dissector()", which actually call the dissector, so
that there's a single place at which we can do that translation. Also
make "dissector_lookup()" static and, instead of calling it and, if it
returns a non-null pointer, calling that dissector, just use
"old_dissector_try_port()" or "dissector_try_port()", for the same
reason.)
This allows some dissectors that took old-style arguments and
immediately translated them to new-style arguments to just take
new-style arguments; make them do so. It also allows some new-style
dissectors not to have to translate arguments before calling routines to
look up and call dissectors; make them not do so.
Get rid of checks for too-short frames in new-style dissectors - the
tvbuff code does those checks for you.
Give the routines to register old-style dissectors, and to call
dissectors from old-style dissectors, names beginning with "old_", with
the routines for new-style dissectors not having the "old_". Update the
dissectors that use those routines appropriately.
Rename "dissect_data()" to "old_dissect_data()", and
"dissect_data_tvb()" to "dissect_data()".
svn path=/trunk/; revision=2218
a particular type, rather than taking a varargs list, along the lines of
the "proto_tree_add_XXX_format()" routines.
Replace most calls to "proto_tree_add_item()" and
"proto_tree_add_item_hidden()" with calls to those routines.
Rename "proto_tree_add_item()" and "proto_tree_add_item_hidden()" to
"proto_tree_add_item_old()" and "proto_tree_add_item_hidden_old()", and
add new "proto_tree_add_item()" and "proto_tree_add_item_hidden()"
routines that don't take the item to be added as an argument - instead,
they fetch the argument from the packet whose tvbuff was handed to them,
from the offset handed to them.
svn path=/trunk/; revision=2031
protocols encapsulated inside DDP register themselves with that table.
Pull the EIGRP dissector into its own file, as suggested by Paul
Ionescu; it's not an IP-specific protocol.
svn path=/trunk/; revision=2022
Add exceptions routines.
Convert proto_tree_add_*() routines to require tvbuff_t* argument.
Convert all dissectors to pass NULL argument ("NullTVB" macro == NULL) as
the tvbuff_t* argument to proto_tree_add_*() routines.
dissect_packet() creates a tvbuff_t, wraps the next dissect call in
a TRY block, will print "Short Frame" on the proto_tree if a BoundsError
exception is caught.
The FDDI dissector is converted to use tvbuff's.
svn path=/trunk/; revision=1939
sub-dissector table is not stored in the header_field_info struct, but
in a separate namespace. Dissector tables are now registered by name
and not by field ID. For example:
udp_dissector_table = register_dissector_table("udp.port");
Because of this different namespace, dissector tables can have names
that are not field names. This is useful for ethertype, since multiple
fields are "ethertypes".
packet-ethertype.c replaces ethertype.c (the name was changed so that it
would be named in the same fashion as all the filenames passed to make-reg-dotc)
Although it registers no protocol or field, it registers one dissector table:
ethertype_dissector_table = register_dissector_table("ethertype");
All protocols that can be called because of an ethertype field now register
that fact with dissector_add() calls.
In this way, one dissector_table services all ethertype fields
(hf_eth_type, hf_llc_type, hf_null_etype, hf_vlan_etype)
Furthermore, the code allows for names of protocols to exist in the
etype_vals, yet a dissector for that protocol doesn't exist. The name
of the dissector is printed in COL_INFO. You're welcome, Richard. :-)
svn path=/trunk/; revision=1848
proto_tree_add_protocol_format()
proto_tree_add_uint_format()
proto_tree_add_ipxnet_format()
proto_tree_add_ipv4_format()
proto_tree_add_ipv6_format()
proto_tree_add_bytes_format()
proto_tree_add_string_format()
proto_tree_add_ether_format()
proto_tree_add_time_format()
proto_tree_add_double_format()
proto_tree_add_boolean_format()
If using GCC 2.x, we can check the print-format against the variable args
passed in. Regardless of compiler, we can now check at run-time that the
field type passed into the function corresponds to what that function
expects (FT_UINT, FT_BOOLEAN, etc.)
Note that proto_tree_add_protocol_format() does not require a value field,
since the value of a protocol is always NULL. It's more intuitive w/o the
vestigial argument.
Fixed a proto_tree_add_item_format-related bug in packet-isis-hello.c
Fixed a variable usage bug in packet-v120.c. (ett_* was used instead of hf_*)
Checked in Guy's fix for the function declearation for proto_tree_add_text()
and proto_tree_add_notext().
svn path=/trunk/; revision=1713
packet-ipv6.h. Of all the files that include packet-ipv6.h, only
ipproto.c needs "globals.h", so I put the #include in ipproto.c
svn path=/trunk/; revision=1229
dynamically-assigned "ett_" integer values, assigned by
"proto_register_subtree_array()"; this:
obviates the need to update "packet.h" whenever you add a new
subtree type - you only have to add a call to
"proto_register_subtree_array()" to a "register" routine and an
array of pointers to "ett_", if they're not already there, and
add a pointer to the new "ett_" variable to the array, if they
are there;
would allow run-time-loaded dissectors to allocate subtree types
when they're loaded.
svn path=/trunk/; revision=1043
appears to be the case on AIX 4.3.2 - it defines BIG_ENDIAN or
LITTLE_ENDIAN differently from the way "global.h" defines them, and also
defines BYTE_ORDER, we don't get a compiler warning - instead,
"global.h" refrains from defining them (as BYTE_ORDER is defined).
svn path=/trunk/; revision=970
quite possibly other UNIX-flavored OSes), in order to declare "ntohs()"
and the like. Put the include back (I guess we could include "global.h"
after including it, or move the byte-order stuff into a separate header
file and include *that* after <netinet.h>, in order to squelch the
complaints somebody saw compiling on AIX).
svn path=/trunk/; revision=969
<sys/machine.h> to be included (presumably to define the machine's byte
order, to declare the "ntoh" and "hton" routines/macros correctly),
which causes BIG_ENDIAN and LITTLE_ENDIAN to be defined, but that's done
after we've included "globals.h", so they're already defined, and the
compiler complains. We don't need it (at least not on FreeBSD).
svn path=/trunk/; revision=967
Print the fields of a DDP address as unsigned quantities.
The maximum length of the string for a DDP address is 13 characters
(plus a trailing '\0'); adjust the lengths of the buffers in
"atalk_addr_to_str()".
svn path=/trunk/; revision=912
the base for numbers to be displayed in, bitmasks for bitfields, and blurbs
(which are one or two sentences describing the field).
proto_tree_add*() routines now automatically handle bitfields. You tell
it which header field you are adding, and just pass it the value of the
entire field, and the proto_tree routines will do the masking and shifting
for you.
This means that bitfields are more naturally filtered via dfilter now.
Added Phil Techau's support for signed integers in dfilters/proto_tree.
Added the beginning of the SNA dissector. It's not complete, but I'm
committing it now because it has example after example of how to use
bitfields with the new header_field_info struct and proto_tree routines.
It was the impetus to change how header_field_info works.
svn path=/trunk/; revision=815
not like #preprocessor_macros that do not start at
the first column.
So write:
#ifdef FOO
# include <dummy1.h>
# define DUMMY 1
#else
# include <dummy2.h>
# define DUMMY 2
#endif
instead of
#ifdef FOO
#include <dummy1.h>
#define DUMMY 1
#else
#include <dummy2.h>
#define DUMMY 2
#endif
svn path=/trunk/; revision=668
Move some defines that would be used even by a non-GTK+-based Ethereal
from "gtk/main.h" to "globals.h".
Remove the byte-order #defines from "packet.h", as they're now in
"globals.h" (having been moved there from "gtk/main.h").
Fix up some files that use those #defines to include "globals.h".
"resolv.c" doesn't use any GTK stuff, so it needn't include <gtk/gtk.h>
nor "gtk/main.h" - it only did so to get the byte-order #defines for the
benefit of "packet-ipv6.h", and "packet-ipv6.h" now includes them
itself.
svn path=/trunk/; revision=649
bunch of source files.
Replace the "payload" field of a "packet_info" structure with "len" and
"captured_len" fields, which contain the total packet length and total
captured packet length (including all headers) at the current protocol
layer (i.e., if a given layer has a length field, and that length field
says its shorter than the length we got from the capture, reduce the
"pi.len" and "pi.captured_len" values appropriately). Those fields can
be used in the future if we add checks to make sure a field we're
extracting from a packet doesn't go past the end of the packet, or past
the captured part of the packet.
Get rid of the additional payload argument to some dissection functions;
use "pi.captured_len - offset" instead.
Have the END_OF_FRAME macro use "pi.captured_len" rather than
"fd->cap_len", so that "dissect the rest of the frame" becomes "dissect
the rest of the packet", and doesn't dissect end-of-frame padding such
as padding added to make an Ethernet frame 60 or more octets long. (We
might want to rename it END_OF_PACKET; if we ever want to label the
end-of-frame padding for the benefit of people curious what that extra
gunk is, we could have a separate END_OF_FRAME macro that uses
"fd->cap_len".)
svn path=/trunk/; revision=506
mechanism that is built into ethereal. Wiretap is now used to read all
file formats. Libpcap is used only for capturing.
svn path=/trunk/; revision=342
proto*() functions. The configure script tries to use ipv6 name resolution if
it knows the type of ipv6 stack the user has (this can be avoided with the
--disable-ipv6 switch) Additionally, the configure script now deals with wiretap
better. If the user doesn't want to compile wiretap, the wiretap is never
visited. A few unnecessary #includes were removed from some wiretap files, and
a CPP macro was moved from bpf.c to wtap.h.
svn path=/trunk/; revision=229
reference the protocol tree with struct proto_tree and struct proto_item
objects. That way, the packet decoding source code file can be used with
non-gtk packet decoders, like a curses-based ethereal, e.g. I also re-arranged
some of the information in packet.h to more appropriate places (like other
packet-*.[ch] files).
svn path=/trunk/; revision=223
Guy Harris