The "Basic code table" in ISO 646 is mostly ASCII, but some code points
either 1) have more than one glyph that can be assigned to them or 2)
have no glyph assigned to them. National versions choose one of the two
glyphs for the code points in group 1) and assign specific glyphs to the
code points in group 2); the International Reference Version assigns the
same glyphs to those code points as does ASCII.
For the "Basic code table" encoding, we map the code points in groups 1)
and 2) to a REPLACEMENT CHARACTER; additional encodings can be added for
the national versions.
Add ENC_ISO_646_IRV (International Reference Version) as an alias for
ENC_ASCII.
Expand some comments, and add some comments, while we're at it.
Change-Id: I4f1b5e426ec193775e919731c5cae1224dc65115
Reviewed-on: https://code.wireshark.org/review/33941
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That way, even if we're not building a protocol tree, so that you don't
get protocol tree items, you can get the display string, e.g. to use in
a column.
Replace the use of the "get display string" routines with calls to those
routines.
Change-Id: I23e3e88838bdf837d8660c271f78c79b7d1c5620
Reviewed-on: https://code.wireshark.org/review/33519
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add a BASE_SHOW_ASCII_PRINTABLE flag for the "display" field, to use
with FT_BYTES and FT_UINT_BYTES fields; it specifies that, if the field
consists solely of printable ASCII characters, its value be displayed as
a string, in quotes. Have a routine hfinfo_format_bytes() to do that
formatting, depending on the display field value.
Add routines to fetch the display value of string and
FT_BYTES/FT_UINT_BYTES fields; for strings, it's the result of
hfinfo_format_text(), and for byte arrays, it's the result of
hfinfo_format_bytes().
Use BASE_SHOW_ASCII_PRINTABLE for extended attribute data in SMB and
SMB2. Use the routines in question for extended attribute names
(string) and data (bytes). That keeps us from displaying non-text
extended attribute data as if it were text.
Document BASE_SHOW_ASCII_PRINTABLE.
Change-Id: I24dcf459c14f00985e4daaf9b58f5933964eabd8
Reviewed-on: https://code.wireshark.org/review/33517
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This requires some special hackery, including a new packet-ber.c
routine, as those strings are just OCTET STRINGs, not UTF8Strings.
Change-Id: I776ed47f7400eba366a630b60b94be3397f7b45f
Reviewed-on: https://code.wireshark.org/review/33403
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This makes it possible to set the console.log.level from the Advanced
preferences window.
Change-Id: I5c5551f089a935eef77f54fdcad0ba060f14edfd
Reviewed-on: https://code.wireshark.org/review/32930
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Provide a way to retrieve key URIs ("pkcs11:" and in the future maybe
"system:") and validate the PIN/password for such keys. Additionally
permit validation of a RSA key file.
This will be used for the RSA Keys GUI dialog.
Change-Id: I4177a11cb9f4758d7564daae509e20a4a42623fa
Reviewed-on: https://code.wireshark.org/review/31794
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
The loop to remove all matching callbacks was skipping every second
entry which would give some leaks when reloading Lua plugins.
Add funnel_cleanup() to be called in epan_cleanup() at shutdown
to remove all allocated menu entries.
Change-Id: I3a50ba2070c8675fee1385f25e9e109db57c2dc5
Reviewed-on: https://code.wireshark.org/review/31769
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Bug: 4234
Change-Id: Ibd59809b2dd9890a7851eb57ef7af384e280a74b
Reviewed-on: https://code.wireshark.org/review/31222
Reviewed-by: Michael Mann <mmann78@netscape.net>
This should eventually replace the "ssl_keys" UAT which additionally
contains a useless address, port and protocol field. This prepares for
HSM support through PKCS #11.
Change-Id: I59409c98aeedf260d19266d18e14ef7d9b40b582
Reviewed-on: https://code.wireshark.org/review/30977
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This is intended to be a replacement for get_token_len (from strutil.h) when its used on a tvb. It should be a little safer and remove the need for a dissector to use tvb_get_ptr.
Change-Id: Ib2d4a79718b6fba4eb9acc0129b13be6c8199a43
Reviewed-on: https://code.wireshark.org/review/30892
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add a new secrets API to the core, one that can outlive the lifetime of
a single capture file. Expose decryption secrets from wiretap through a
callback and let the secrets API route it to a dissector.
Bug: 15252
Change-Id: Ie2f1867bdfd265bad11fc58f1e8d8e7295c0d1e7
Reviewed-on: https://code.wireshark.org/review/30705
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Registration definitions for built-in dissectors are internal to
libwireshark.
Change-Id: Icd7065731459848bd6aabe721ae1da6d2e7ced34
Reviewed-on: https://code.wireshark.org/review/30371
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
This allows dissectors to check if a portion of the tvb is an ascii string while hiding the use of tvb_get_ptr.
Change-Id: Iaec7559dcfdefb8a5ae23e099ced45e90e611f8f
Reviewed-on: https://code.wireshark.org/review/30291
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
We are exporting a registration function from libwireshark just
to have it passed back as a callback. Seems unnecessary.
Change-Id: I7621005c9be11691d319102326824c5e3520a6f3
Reviewed-on: https://code.wireshark.org/review/29328
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
This reverts commit ba202ef362.
Creating endpoints, and corresponding conversations, for protocols atop which TCP or UDP runs can potentially cause attempts to look up the conversation to find the conversation for that protocol rather than for TCP/UDP, which can confuse protocols running atop TCP or UDP.
Change-Id: I3ca522e54e67cc4f996d0ee841c6bb40ee6a9976
Reviewed-on: https://code.wireshark.org/review/28912
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add conversation_new_pinfo(), which uses the endpoint if present, and
have find_or_create_conversation() use it rather than
conversation_new().
Remove find_or_create_conversation_by_id() - it's no longer needed.
Bug: 15018
Change-Id: Ib13e539751af0f071aede4ee0ed751d0cb72ba3f
Reviewed-on: https://code.wireshark.org/review/28908
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That isn't working, because it depends on the notion that for every
"endpoint type" there's a "port type" for the packet_info structure;
that's not true for ISDN channels.
The whole point of "use the packet_info structure when trying to find a
conversation and create it if it doesn't exist" is to use address
information *already filled in by somebody for use by other dissectors*;
we don't do that with the ISDN channel number, because there's no *need*
to do so.
So just add a new find_or_create_conversation_by_id() routine, which
passes the packet_info structure to get the frame number, and explicitly
passes the endpoint type and ID. Use that in the ISDN dissector.
Bug: 15018
Change-Id: Id0e997254b0eaf7cbc9261a2adff639ecbf083c0
Reviewed-on: https://code.wireshark.org/review/28904
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Also, move some symbols to the correct location.
Change-Id: Iba2df29961ba2fd13bda069e7664dc55df50bb53
Reviewed-on: https://code.wireshark.org/review/26665
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add col_data_changed, which checks to see if we have updated column
info. Add col_append_frame_number, which adds a frame number and sets
col_data_changed. Call col_append_frame_number instead of
col_append_fstr from some dissectors.
Add PacketListRecord::invalidateAllRecords, which invalidates any cached
record data. Add PacketListModel::invalidateAllColumnStrings which calls
invalidateAllRecords and signals that our data has changed. Call
invalidateAllColumnStrings when we have new name resolution or column
information.
Bug: 11414
Bug: 11468
Change-Id: I2671594a722f4f9436fe1df84d43489a148e0cee
Reviewed-on: https://code.wireshark.org/review/26373
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
MaxMind is discontinuing its legacy databases in April in favor of
GeoIP2, which use a newer database format (MaxMind DB). The reference C
library (libmaxminddb) is available under the Apache 2.0 license which
isn't quite compatible with ours.
Add mmdbresolve, a utility that reads IPv4 and IPv6 addresses on stdin
and prints resolved information on stdout. Place it under a liberal
license (MIT) so that we can keep libmaxminddb at arm's length. Add
epan/maxmind_db.[ch], which spawns mmdbresolve and communicates with it
via stdio.
Migrate the preferences and documentation to MaxMindDB.
Change the IPv4 and IPv6 asnum fields to FT_UINT32s. Change the
geographic coordinate fields to FT_DOUBLEs.
Bug: 10658
Change-Id: I24aeed637bea1b41d173270bda413af230f4425f
Reviewed-on: https://code.wireshark.org/review/26214
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Our 802.11 decryption code isn't tied to any specific product. Change
the file and API names to dot11decrypt.
Change-Id: I14fd951be3ae9b656a4e1959067fc0bdcc681ee2
Reviewed-on: https://code.wireshark.org/review/26058
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
There are no "old" versions of them that we're keeping around.
Change-Id: I3c76a14d0ec1a06df39c547da37f4dea9987df4d
Reviewed-on: https://code.wireshark.org/review/25892
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Change-Id: I209fde24ca421b8e2dfd982408b4610bc5e63d82
Reviewed-on: https://code.wireshark.org/review/25655
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add flags field to preference structure to help determine what
areas of Wireshark are affected by a preference changing. The
intent is to be able to distinguish dissection from GUI or other
changes that are not dissection.
The default is to have all preferences affect dissection, but their
flags can be changed. This patch doesn't change any flags from the
default.
Change-Id: Ied5ae961bc3f33f5b730b2892fff3fa0898380b8
Reviewed-on: https://code.wireshark.org/review/25171
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
Put different types of plugins (libwiretap, libwireshark) in different
subdirectories, give libwiretap and libwireshark init routines that
load the plugins, and have them scan the appropriate subdirectories
so that we don't even *try* to, for example, load libwireshark plugins
in programs that only use libwiretap.
Compiled plugins are stored in subfolders of the plugin folders, with
the subfolder name being the Wireshark minor version number (X.Y). There is
another hierarchical level for each Wireshark library (libwireshark, libwscodecs
and libwiretap).
The folder names are respectively plugins/X.Y/{epan,codecs,wiretap}.
Currently we only distribute "epan" (libwireshark) plugins.
Change-Id: I3438787a6f45820d64ba4ca91cbe3c8864708acb
Reviewed-on: https://code.wireshark.org/review/23983
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
Guy Harris