When VoIP Calls/Flow Sequence generates list of nodes to show (nodes above flow), it do not clear the list from last call. As consequence of it, when second call is between hosts than first call, you see nodes which are not involved in call.
Change-Id: I80f9acb09e6aa71b3a32bb6eacaeb5b4bb13b332
Reviewed-on: https://code.wireshark.org/review/19267
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Packets without a color filter will end up with fg_color and
bg_color = 0, so avoid drawing all in black.
Bug: 12065
Change-Id: I76bcabcfa3281fcece08f1b2af66274c808b80bb
Reviewed-on: https://code.wireshark.org/review/18018
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Not all packet have a color filter, so check for this before use.
Bug: 12065
Change-Id: Ieed8d369342bde50fe8a1562be9379695da9fbaa
Reviewed-on: https://code.wireshark.org/review/15677
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
For SEQ_ANALYSIS_ANY, color each sequence diagram item according to its
associated packet. For SEQ_ANALYSIS_TCP, color each item according to
its stream.
Bug: 12065
Change-Id: Ib43490fe55039fbcfa793223b5850233a2694a26
Reviewed-on: https://code.wireshark.org/review/15651
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Try to improve address API and also fix some constness warnings
by not overloading the 'data' pointer to store malloc'ed buffers
(use private pointer for that instead).
Second try, now passing test suite.
Change-Id: Idc101cd866b6d4f13500c9d59da5c7a38847fb7f
Reviewed-on: https://code.wireshark.org/review/13946
Petri-Dish: João Valverde <j@v6e.pt>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
This reverts commit 13ec77a9fc.
This commit introduces a segmentation fault for Lua code (uncovered by the test suite).
Change-Id: Ibc273d1915cda9632697b9f138f0ae104d3fb65e
Reviewed-on: https://code.wireshark.org/review/13813
Reviewed-by: João Valverde <j@v6e.pt>
Try to improve 'address' API (to be easier/safer) and also avoid
some constness warnings by not overloading the 'data' pointer to
store malloc'ed buffers (use private pointer for that instead).
Change-Id: I7456516b12c67620ceadac447907c12f5905bd49
Reviewed-on: https://code.wireshark.org/review/13463
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
It's not tied to the frame_data structure any more, so it belongs by
itself.
Clean up some #includes while we're at it; in particular, frame_data.h
doesn't use anything related to tvbuffs, so don't have it gratuitiously
include tvbuff.h.
Change-Id: Ic32922d4a3840bac47007c5d4c546b8842245e0c
Reviewed-on: https://code.wireshark.org/review/13518
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That removes most of the uses of the frame number field in the
frame_data structure.
Change-Id: Ie22e4533e87f8360d7c0a61ca6ffb796cc233f22
Reviewed-on: https://code.wireshark.org/review/13509
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Don't return allocated memory as a const pointer.
Fixes multiple [-Wcast-qual] warnings.
Change-Id: Ie9ceac27fa2a5eba41a5392ac983ff28c3939239
Reviewed-on: https://code.wireshark.org/review/12267
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Qt GUI allows to keep windows open after closing the capture file. Let's not access to freed memory.
Bug: 11573
Change-Id: I9e70d818a4b228af319961ec512b6b9725792477
Reviewed-on: https://code.wireshark.org/review/11270
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Replace CMP_ADDRESS, COPY_ADDRESS, et al with their lower-case
equivalents in the ui directory.
Change-Id: I10e95e66c8da5b880133452ebc484c53046e87ba
Reviewed-on: https://code.wireshark.org/review/11199
Reviewed-by: Michael Mann <mmann78@netscape.net>
Note the "initial". This is woefully incomplete. See the "to do" lists
below and in the code.
This differs a bit from the GTK+ version in that you specify one or more
streams to be decoded.
Instead of showing waveforms in individual widgets, add them all to a
single QCustomPlot. This conserves screen real estate and lets us more
easily take advantage of the QCP API. It also looks better IMHO.
Change a bunch of checks for QtMultimediaWidgets to QtMultimedia. We
probably won't use the widgets until we make 5.0 our minimum Qt
version and plain old QtMultimedia lets us support Qt 4 more easily
(in theory at least).
Add resampling code from libspeex. I initially used this to resample
each packet to match the preferred rate of our output device, but this
resulted in poorer audio quality than expected. Leave it in and use to
create visual samples for QCP and to match rates any time the rate
changes. The latter is currently untested.
Add some debugging macros.
Note that both the RTP player and RTP analysis dialogs decode audio data
using different code.
Note that voip_calls_packet and voip_calls_init_tap appear to be dead
code.
To do:
- Add silence frames where needed.
- Implement the jitter buffer.
- Implement the playback timing controls.
- Tapping / scanning streams might be too slow.
Change-Id: I20dd3b66d3df53c9b1f3501262dc01458849f6b4
Bug: 9007
Reviewed-on: https://code.wireshark.org/review/10458
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Do not retrieve type and code base on the info column content.
Instead store type and code in pinfo structure and retrieve them in sequence analysis tap.
Change-Id: I71cd505d7faf713c2372731495d47b45928a41f8
Reviewed-on: https://code.wireshark.org/review/10280
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Reviewed-by: Pascal Artho <pascalartho@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
The tap_sequence_analysis was adapted to store the protocol of each
frame. Therefore a new variable was introduced. In case of an ICMP or
ICMPv6 packet, the ICMP message type and code is retrieved. The adapted
ICMP and ICMPv6 dissector stores both values in packet info (see [1]).
In case of ICMP and ICMPv6 packets, the source and destination port is
not set or 0, respectively. Compared to that, the NetFlow service export
protocol [2] codes the ICMP message type and code into the port numbers.
The source port is zero while the destination is defined as: destination
port = ICMP type * 256 + ICMP code. This definition was implemented for
the ICMP and ICMPv6 packets.
References
[1] https://code.wireshark.org/review/10097
[2] http://www.ietf.org/rfc/rfc3954.txt
Change-Id: I07518e360975682a3f45e80cb24f82f58cfb15f0
Reviewed-on: https://code.wireshark.org/review/10098
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Change-Id: Ib982662db6cf68730a7d121eac60d9bc5ae67429
Reviewed-on: https://code.wireshark.org/review/9195
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Almost all instances require using "manual" memory management, but it gets some ep_ calls out of the GUI.
Change-Id: Ifa7303766b08d09442ccf3d7063cbe061578ecd9
Reviewed-on: https://code.wireshark.org/review/6318
Reviewed-by: Michael Mann <mmann78@netscape.net>
Add Telephony menu items for VoIP Calls and SIP Flows. Put VoIP Calls at
the top, since that seems to be the primary item.
Add configure-time checks for QtMultimediaWidgets in anticipation of
adding a VoIP playback dialog.
Add an icon for the playback button. (Yes, I've been avoiding
GNOME-level gratuitous icons so far but this is one of the rare
occiasions where it makes sense.)
Add a help link define for the VoIP calls dialog.
Change-Id: I5d0799685c598ad9af76fe9667f8ea7d14b66050
Reviewed-on: https://code.wireshark.org/review/5674
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Fix struct initialization logic. Clear a GQueue instead of deleting it.
Don't crash if we have no sequence diagram items. Make sure we show all
flows and not just invites. Zero allocated memory in a couple of places.
Change-Id: Ia5bb3ba57cf625de4b554b354e098aa0361dff28
Reviewed-on: https://code.wireshark.org/review/5390
Reviewed-by: Gerald Combs <gerald@wireshark.org>
This makes reversing the list back and forth to keep adding data
at O(n) complexity obsolete.
Bug: 9696
Change-Id: Ice77328b8f6c5bf72bbfcfd82e08d09d4f986d3f
Reviewed-on: https://code.wireshark.org/review/2571
Reviewed-by: Balint Reczey <balint@balintreczey.hu>
Tested-by: Balint Reczey <balint@balintreczey.hu>
"get_addr_name()" -> "ep_address_to_display()", to 1) indicate that it
returns a string with ephemeral scope and 2) indicate that it maps an
address to a "displayable" form - a name if possible, an address string
if not.
"se_get_addr_name()" -> "get_addr_name()", to indicate that its strings
have the same scope as "get_ether_name()", "get_hostname()", and
"get_hostname6()".
Change-Id: If2ab776395c7a4a163fef031d92b7757b5d23838
Reviewed-on: https://code.wireshark.org/review/1216
Reviewed-by: Guy Harris <guy@alum.mit.edu>
(Using sed : sed -i '/^ \* \$Id\$/,+1 d')
Fix manually some typo (in export_object_dicom.c and crc16-plain.c)
Change-Id: I4c1ae68d1c4afeace8cb195b53c715cf9e1227a8
Reviewed-on: https://code.wireshark.org/review/497
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Plumb some controls. Adjust dialog layout. Make sure sequence
information is allocated and freed correctly. Remove a debugging
statement.
svn path=/trunk/; revision=53260
Draw item labels and port numbers. Update the hint text. Make items
selectable. Resize fonts similar to the GTK+ version. Add scrollbars.
Update the cursor. Use pango_layout_set_ellipsize() in the GTK+ code.
Fixup comments.
svn path=/trunk/; revision=52855
Copy common code from ui/gtk/flow_graph.c and ui/gtk/graph_analysis.[ch]
to ui/tap-sequence-analysis.[ch]. Start using the name "sequence" in
places.
svn path=/trunk/; revision=52824
Jiri Novak