A new dissector for IEEE 1722.1.
From me: some code cleanup, including:
- Get rid of some unnecessary local variable initializations.
- Put all of 1722.1 under one subtree.
- Just put if(tree)s in the top-level function rather than scattered throughout.
- Remove a couple "set but not used" warnings (a couple are #if'd out).
- Don't use deprecated functions.
svn path=/trunk/; revision=41282
Dissector for Alcatel-Lucent Enterprise Universal Alcatel- and NOE protocol, take II.
families.
Meant as a replacement for existing UA-dissector in trunk because of better
feature set:
- latest protocol specifiaction
- more detailed dissection and filtering possibilities on subprotocols
- RTP stream setup
- NOE over SIP
Lars Ruoff
On behalf of Alcatel-Lucent Enterprise
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=6844
svn path=/trunk/; revision=41266
Support for MPLS Packet Loss and Delay Measurement, RFC 6374
Support for MPLS Packet Loss and Delay Measurement, RFC 6374.
Any packetformat is supported: DLM, ILM, DM, DLM+DM and ILM+DM.
From me :
* Prefer proto_tree_add_item when it is possible
* add Modelines information
svn path=/trunk/; revision=41260
via https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=6792
This is a new dissector for the non-standard Ericsson OM2000 protocol, as it is
used for the OML on A-bis of Ericsson RBS 2xxx BTSs.
It also includes a dissector for a shim-layer protocol that Ericsson uses for
IP-based A-bis like the RBS 2409. As the protocol is not publicly documented,
I have invented the name "EHDLC" (Ericsson HLDC) for it.
svn path=/trunk/; revision=41195
Dissector for Alcatel-Lucent Enterprise Universal Alcatel- and NOE protocol
families.
Meant as a replacement for existing UA-dissector in trunk because of better
feature set:
- latest protocol specifiaction
- more detailed dissection and filtering possibilities on subprotocols
- RTP stream setup
- NOE over SIP
Lars Ruoff
On behalf of Alcatel-Lucent Enterprise
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=6844
svn path=/trunk/; revision=41134
TThis is a new dissector for the GSM A-bis OML protocol as specified in TS
12.21,
including some Siemens and ip.access vendor-specific extensions.
The protocol is called from both classic ISDN (LAPD) based A-bis as well as the
gsm_ipa dissector.
- Fixed the encoding argument to proto_add_item()
- Removed Attribute as that does not compile on windows.
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=5784
svn path=/trunk/; revision=40851
the existing "mac-lte" UDP heuristic dissector. It is hoped that it will be
possible to register a DLT for use with this format.
svn path=/trunk/; revision=40580
The ANSI C12.22 protocol is a smart grid protocol for utility meters, including
gas, water and electric. The dissector implemented in the patch file includes
full support for all EPSEM (Extended Protocol Specification for Electricity
Metering) services and includes a full implementation of the C12.22 security
modes.
[...]
To decrypt the attached sample file, you need to set up the key table in the
preferences to include key 0 with a value of 6624C7E23034E4036FE5CB3A8B5DAB44.
Me: Fixes for:
[ 64%] Building C object epan/CMakeFiles/epan.dir/dissectors/packet-c1222.c.o
../../asn1/c1222/packet-c1222-template.c: In function ‘dissect_epsem’:
../../asn1/c1222/packet-c1222-template.c:860:15: error: variable ‘ft’ set but not used [-Werror=unused-but-set-variable]
[ 5%] Building C object epan/CMakeFiles/epan.dir/dissectors/packet-c1222.c.o
../../asn1/c1222/packet-c1222-template.c:103:19: error: ‘c1222_flags’ defined but not used [-Werror=unused-variable]
svn path=/trunk/; revision=40500
please.
Move some generated DCERPC dissectors back to the clean list; if they
actually *do* generate warnings, move them back.
svn path=/trunk/; revision=40479
Dissector for the bzr smart server protocol
The attached patch adds basic support for dissecting the bzr smart server protocol ( http://wiki.wireshark.org/Bazaar ).
svn path=/trunk/; revision=40259
dissector for ELCOM communication protocol. This protocol is
used mainly by power utilities, to exchange historical, cyclic, and event based
data between SCADA systems.
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=6616
svn path=/trunk/; revision=40071
kNet (KristalliNet) dissector for Wireshark
kNet is a connection-oriented network protocol for transmitting arbitrary application-specific messages between network hosts. It is designed primarily for applications that require a method for rapid space-efficient real-time communication. kNet is an application-level protocol which can be ran either over UDP, TCP or SCTP transports.
From me :
* Add Modelines information and fix trailing whitespace
* Merge packet-knet.h in packet-knet.c
* Make Checkhf happy
* Fix Clang/GCC Warning about unused variable
* Add Authors info & CMakeList.txt
svn path=/trunk/; revision=40010
packet-x11.c: hundreds of:
/home/jmayer/work/wireshark/svn/trunk/epan/dissectors/x11-extension-implementation.h: In function ‘xselinuxGetClientContext’:
/home/jmayer/work/wireshark/svn/trunk/epan/dissectors/x11-extension-implementation.h:27994:9: warning: variable ‘f_resource’ set but not used [-Wunused-but-set-variable]
/home/jmayer/work/wireshark/svn/trunk/epan/dissectors/x11-extension-implementation.h: In function ‘xselinuxGetClientContext_Reply’:
dissectors/packet-dcerpc-mapi.c: set but not used
/home/jmayer/work/wireshark/svn/trunk/epan/dissectors/packet-dcerpc-mapi.c: In function ‘mapi_dissect_struct_Release_req’:
/home/jmayer/work/wireshark/svn/trunk/epan/dissectors/packet-dcerpc-mapi.c:8592:14: warning: variable ‘tree’ set but not used [-Wunused-but-set-variable]
/home/jmayer/work/wireshark/svn/trunk/epan/dissectors/packet-dcerpc-mapi.c: In function ‘mapi_dissect_struct_Release_repl’:
/home/jmayer/work/wireshark/svn/trunk/epan/dissectors/packet-dcerpc-mapi.c:8617:14: warning: variable ‘tree’ set but not used [-Wunused-but-set-variable]
/home/jmayer/work/wireshark/svn/trunk/epan/dissectors/packet-dcerpc-mapi.c: In function ‘mapi_dissect_struct_RecipSMTP’:
/home/jmayer/work/wireshark/svn/trunk/epan/dissectors/packet-dcerpc-mapi.c:8848:14: warning: variable ‘tree’ set but not used [-Wunused-but-set-variable]
dissecots/packet-dcerpc-drsuapi.c: set but not used
/home/jmayer/work/wireshark/svn/trunk/epan/dissectors/packet-dcerpc-drsuapi.c: In function ‘drsuapi_dissect_DsGetNCChangesCtr7’:
/home/jmayer/work/wireshark/svn/trunk/epan/dissectors/packet-dcerpc-drsuapi.c:2920:17: warning: variable ‘tree’ set but not used [-Wunused-but-set-variable]
Btw.: Does it really make sense to use an extra CMakefile for the dcerpc/ dir?
I'd rather the the idl2wrs.c in tools/ and the generatorstuff in epan/CMake
More files with the same problem.
svn path=/trunk/; revision=39968
as errors:
/home/jmayer/work/wireshark/svn/trunk/epan/dissectors/packet-dcerpc-mapi.c: In function ‘mapi_dissect_struct_Release_req’:
/home/jmayer/work/wireshark/svn/trunk/epan/dissectors/packet-dcerpc-mapi.c:8592:14: error: variable ‘tree’ set but not used [-Werror=unused-but-set-variable]
/home/jmayer/work/wireshark/svn/trunk/epan/dissectors/packet-dcerpc-mapi.c: In function ‘mapi_dissect_struct_Release_repl’:
/home/jmayer/work/wireshark/svn/trunk/epan/dissectors/packet-dcerpc-mapi.c:8617:14: error: variable ‘tree’ set but not used [-Werror=unused-but-set-variable]
/home/jmayer/work/wireshark/svn/trunk/epan/dissectors/packet-dcerpc-mapi.c: In function ‘mapi_dissect_struct_RecipSMTP’:
/home/jmayer/work/wireshark/svn/trunk/epan/dissectors/packet-dcerpc-mapi.c:8848:14: error: variable ‘tree’ set but not used [-Werror=unused-but-set-variable]
svn path=/trunk/; revision=39965
Enhance XMPP Dissector
XMPP is communication protocol that is based on XML.
Existing Jabber dissector has only few filtering possibilities and displays packets in inconvenient way.
This dissector is a result of cooperation with Jitsi community as Google Summer of Code project (http://www.jitsi.org/index.php/GSOC2011/XmppWireshark).
From me :
Add Mariusz Okrój in AUTHORS File
Add Modelines information
svn path=/trunk/; revision=39799
Dissector for the USB Integrated Circuit Card Interface Device Class (CCID)
I've implemented a reasonable subset of a dissector for the USB CCID specification (as described at http://www.usb.org/developers/devclass_docs/DWG_Smart-Card_CCID_Rev110.pdf), during the course of experimenting with an ACS ACR122U ISO 14443 card reader and MiFare tokens.
It currently identifies all of the message types listed in that specification,ng.
From me:
* Fix Clang Warning
* Remove trailing whitespace from lines
* Fix Checkhf (Remove a unused entry)
* Added packet-rfid-mifare to Makefile.common and CMakeLists.txt
svn path=/trunk/; revision=39750
Dissector for the NXP MiFare Protocol
I've just finished writing a dissector for the NXP-proprietary MiFare Protocol, as used alongside ISO 14443-A by a popular range of contactless (not-so-smart) cards, and various emulations, variants and clones thereof.
It currently supports all of the commands listed in http://www.nxp.com/documents/data_sheet/MF1S703x.pdf that also happen to be supported by LibNFC (http://code.google.com/p/libnfc/) - modulo the "NAK" and CRC bytes, since I haven't found examples of their usage in my USB traces, and I didn't want to hand-craft (probably incorrect) examples for testing.
From me:
* Fix Clang Warning
* Remove trailing whitespace from lines;
* Added packet-rfid-mifare to Makefile.common and CMakeLists.txt
* Add Modelines information
svn path=/trunk/; revision=39746
Dissector for HSR and PRP-1
Here is a patch that adds a dissector for HSR and for PRP-1. Both protocols are defined in IEC62439 Part 3. (High-availability Seamless Redundancy / Parallel Redundancy Protocol)
The existing PRP dissector has been refactored to support both the old PRP (now called PRP-0) and the new PRP-1.
There are three distinct dissectors:
- HSR (ethertype 892F)
- HSR/PRP supervision (ethertype 88FB)
- PRP-0 and PRP-1 (trailer dissector; disabled by default)
From me :
* Fix Clang Warning
* Add modification for CMakeLists.txt
svn path=/trunk/; revision=39692