Use WTAP_MAX_PACKET_SIZE_STANDARD, set to 256KB, for everything except
for D-Bus captures. Use WTAP_MAX_PACKET_SIZE_DBUS, set to 128MB, for
them, because that's the largest possible D-Bus message size. See
https://bugs.freedesktop.org/show_bug.cgi?id=100220
for an example of the problems caused by limiting the snapshot length to
256KB for D-Bus.
Have a snapshot length of 0 in a capture_file structure mean "there is
no snapshot length for the file"; we don't need the has_snap field in
that case, a value of 0 mean "no, we don't have a snapshot length".
In dumpcap, start out with a pipe buffer size of 2KB, and grow it as
necessary. When checking for a too-big packet from a pipe, check
against the appropriate maximum - 128MB for DLT_DBUS, 256KB for
everything else.
Change-Id: Ib2ce7a0cf37b971fbc0318024fd011e18add8b20
Reviewed-on: https://code.wireshark.org/review/21952
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add the cause for a syntax error while parsing UATs. Example output:
$ tshark -ouat:ssl_keys:,
tshark: Invalid -o flag "uat:ssl_keys:,": ssl_keys:1: No IP address given.
$ tshark -ouat:unknown:,
tshark: Invalid -o flag "uat:unknown:,": Unknown preference
Change-Id: I549406c4e31a81d29f487ef47bdb3c22da084947
Reviewed-on: https://code.wireshark.org/review/21748
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Jakub Zawadzki <darkjames-ws@darkjames.pl>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Without setting the success variable as volatile my build fails
with warning "error: variable success might be clobbered by 'longjmp' or 'vfork'"
Change-Id: Ic7d4a9b8be4bf9211127dcf5a6bb4bef8bbcd7a9
Reviewed-on: https://code.wireshark.org/review/21310
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Packet ranges are used only in the UI; move the packet range stuff into
libui.
Don't pass a print_args_t structure to libwireshark packet-printing
routines, just pass the few parameters they need. Move the declaration
of print_args_t into file.h.
Change-Id: Icff5991eea7d7d56f33b4716105895263d275bcf
Reviewed-on: https://code.wireshark.org/review/21308
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
They might read the file once or twice, but the key is that they (and
what they call) are doing the work of processing the file's contents.
Change-Id: I2df6257c55ff5ace944f1a1db5e2aec456ed2038
Reviewed-on: https://code.wireshark.org/review/21293
Reviewed-by: Guy Harris <guy@alum.mit.edu>
No need to report the precise error code - it's already reported the
error.
Change-Id: Ib52daf094253deac2a10d16793ebf0f42581afd6
Reviewed-on: https://code.wireshark.org/review/21292
Reviewed-by: Guy Harris <guy@alum.mit.edu>
In TShark, rename load_cap_file() to read_cap_file(); this is TShark,
not Wireshark, so you're not "loading" a file to be manipulated through
the GUI.
In TFShark, rename it to "read_file()"; not only are we not loading it,
it's not even necessarily a capture file.
Change-Id: I122b46ecd8cb7de9c1e1c249ba6c08fdeb93f7e2
Reviewed-on: https://code.wireshark.org/review/21291
Reviewed-by: Guy Harris <guy@alum.mit.edu>
They deal with sets of hfids, which can belong to protocols as well as
fields (I guess you could argue that a protocol is a field, but...).
Change-Id: Ibd103cfa26427ead4ef54be89f1251908004cfae
Reviewed-on: https://code.wireshark.org/review/21154
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This makes sure that postdissectors that indicate that they need certain
fields in the first pass will get them.
While we're at it:
Fix the field-fetching code in TRANSUM not to assume it got any
instances of the field being fetched.
Rename process_packet_first_pass() in sharkd to process_packet(), as
it's the only routine in sharkd that processes packets.
Rename process_packet() in tshark and tfshark to
process_packet_single_pass(), as it's what's used if we're only doing
one-pass analysis.
Clean up comments and whitespace.
Change-Id: I3769af952c66f5ca4b68002ad6213858ab9cab9b
Reviewed-on: https://code.wireshark.org/review/21063
Reviewed-by: Guy Harris <guy@alum.mit.edu>
XXX_prime_with_YYY makes it a bit clearer than does XXX_prime_YYY that
we're not priming YYY, we're priming XXX *using* YYY.
Change-Id: I1686b8b5469bc0f0bd6db8551fb6301776a1b133
Reviewed-on: https://code.wireshark.org/review/21031
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Currently, this is only used to determine whether a protocol tree needs
to be built on the first pass or not - if there are postdissectors that
need fields, it does - but eventually we should be able to use it to
prime the dissection to deliver those fields in cases where we don't
need the *entire* protocol tree (rather than using a hack such as
cooking up a fake tap with a fake filter to do that).
Update MATE and TRANSUM to use it.
Clean up code to check whether we need a protocol tree, and add comments
before that code indicating, in each case, what the criteria are.
The array of postdissectors includes a length, so we don't need to
separately keep track of the number of postdissectors.
Clean up indentation while we're at it.
Change-Id: I71d4025848206d144bc54cc82941089a50e80ab7
Reviewed-on: https://code.wireshark.org/review/21029
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That way, nothing using libwireshark needs to know what settings need to
be loaded, they just call epan_load_settings().
Change-Id: I9390e259e286fc4f5acaeaac2767e4c3c4b656af
Reviewed-on: https://code.wireshark.org/review/20983
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
No need to duplicate it in N different programs.
Update comments while we're at it.
Change-Id: I3096cbe5448a19363eff6303bdd54e522dae9336
Reviewed-on: https://code.wireshark.org/review/20973
Reviewed-by: Guy Harris <guy@alum.mit.edu>
It's identical in the GTK+ and Qt UIs, and it should just be done in
libwireshark.
Rename some routines to just speak of enabled_and_disabled_lists, so we
don't have to say enabled_and_disabled_protos_and_heuristic_dissectors
or something such as that.
Clean up indentation.
Change-Id: Ief2e612d9e1b60d8d0123b6bd3409dce5faf6495
Reviewed-on: https://code.wireshark.org/review/20970
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add a "report a warning message" routine to the "report_err" code in
libwsutil, and rename files and routines appropriately, as they don't
only handle errors any more.
Have a routine read_enabled_and_disabled_protos() that reads all the
files that enable or disable protocols or heuristic dissectors, enables
and disables them based on the contents of those files, and reports
errors itself (as warnings) using the new "report a warning message"
routine. Fix that error reporting to report separately on the disabled
protocols, enabled protocols, and heuristic dissectors files.
Have a routine to set up the enabled and disabled protocols and
heuristic dissectors from the command-line arguments, so it's done the
same way in all programs.
If we try to enable or disable an unknown heuristic dissector via a
command-line argument, report an error.
Update a bunch of comments.
Update the name of disabled_protos_cleanup(), as it cleans up
information for disabled *and* enabled protocols and for heuristic
dissectors.
Support the command-line flags to enable and disable protocols and
heuristic dissectors in tfshark.
Change-Id: I9b8bd29947cccdf6dc34a0540b5509ef941391df
Reviewed-on: https://code.wireshark.org/review/20966
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Avoid anachronisms, however; there was no "macOS 10.0" or even "OS X
10.0", for example. It was "Mac OS X" until 10.8 (although 10.7 was
sometimes called "OS X" and sometimes called "Mac OS X"), and it was "OS
X" from 10.8 to 10.11.
Change-Id: Ie4a848997dcc6c45c2245c1fb84ec526032375c3
Reviewed-on: https://code.wireshark.org/review/20933
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Our user-facing messages should have a helpful (or at the very least
neutral) tone. In English, exclamation points are neither. Replace a
bunch of them with periods.
Change-Id: I29c3b2f84c25e06aae5b559860224559053a0378
Reviewed-on: https://code.wireshark.org/review/20189
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The cleanup routine has been added to exit section of the applications.
Those which required a exit restyle have been patched as well.
Change-Id: I3a8787f0718ac7fef00dc58176869c7510fda7b1
Reviewed-on: https://code.wireshark.org/review/19949
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
We save a list of dissectors that are disabled through the Enabled Protocols
dialog. This is because we assume dissectors are enabled by default.
For dissectors that are disabled by default, we have no way to keep them
enabled through the Enabled Protocols dialog. A dissector that defaults
to being disabled has to be reset to enabled each time Wireshark is launched.
Add a list similar to the disabled list for enabling dissectors that are
disabled by default.
This mostly applies to post-dissectors.
Change-Id: I31a8d97a9fdbc472fe2a8666384e0f8786bb8e9f
Reviewed-on: https://code.wireshark.org/review/19405
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Make the init_progfile_dir() call unconditionally, even if plugins
aren't supported, as that doesn't necessarily mean nobody uses the
directory containing the executable.
Report the error the same way in all programs, and free the error string
after we're finished with it.
Make the error - and the comment before the code - reflect what
init_progfile_dir() is actually doing (the goal is to get the full
pathname of the directory *containing* the executable; that's generally
done by getting the pathname of the executable and stripping off the
name of the executable, but that's won't necessarily always be the
case). Also note for TShark that we won't be able to capture traffic,
just as we do for Wireshark (if we don't have the pathname of the
program file, we don't have a pathname to use to find dumpcap).
Have the plugin scanner just fail silently if we weren't able to get the
plugin directory path, so we don't have to worry about calling it if
init_progfile_dir() fails.
Clean up white space while we're at it.
Change-Id: I8e580c719aab6fbf74a764bf6629962394fff7c8
Reviewed-on: https://code.wireshark.org/review/19076
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Have programs that use libwiretap call that routine rather than
separately calling some or all of init_open_routines(),
wtap_register_plugin_types(), and wtap_opttypes_initialize().
Also don't have routines internal to libwiretap call those. Yes, this
means doing some initialization work when it isn't necessary, but
scattering on-demand calls throughout the code is a great way to forget
to make those calls.
Change-Id: I5828e1c5591c9d94fbb3eb0a0e54591e8fc61710
Reviewed-on: https://code.wireshark.org/review/19069
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Also update tfshark to use that code.
Change-Id: Ic03fb8ff48c8bfc460298d180b436e53f0076cbe
Reviewed-on: https://code.wireshark.org/review/18588
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
In commit v2.3.0rc0-117-g485bc45 (backported to v2.2.0rc0-44-g66721ca),
extcap_prefs_dynamic_vals and extcap_cleanup were added in an attempt to
address dangling pointers.
Unfortunately it is not sufficient:
- A pointer to the preference value is stored in extcap_arg and passed
to the prefs API, but this extcap_arg structure can become invalid
which result in use-after-free whenever the preference is accessed.
- On exit, a use-after-free occurs in prefs_cleanup when the preference
value is being checked.
As the preference subsystem actually manages the memory for the string
value and consumers should only provide a pointer where the value can be
stored, convert the char* field in extcap to char**. This has as
additional benefit that values are not limited to 256 bytes anymore.
extcap_cleanup is moved after epan_cleanup to ensure that prefs_cleanup
does not operate on dangling pointers.
Crash is reproducible under ASAN with: tshark -i randpkt
Ping-Bug: 12183
Change-Id: Ibf1ba1102a5633aa085dc278a12ffc05a4f4a34b
Reviewed-on: https://code.wireshark.org/review/17631
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
These programs resulted on a memleak report on exit.
Change-Id: I630618f50d723b7af4cb00ba29671d4e7c6fcdc2
Reviewed-on: https://code.wireshark.org/review/17623
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
That's a less gross hack to suppress load failures due to not having
libwiretap than providing a no-op failure-message routine, as it at
least allows other code using a failure-message routine, such as
cmdarg_err() and routines that call it, to be used.
We really should put libwiretap and libwireshark plugins into separate
subdirectories of the plugin directories, and avoid even looking at
libwireshark plugins in programs that don't use libwireshark.
Change-Id: I0a6ec01ecb4e718ed36233cfaf638a317f839a73
Reviewed-on: https://code.wireshark.org/review/17506
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Allow stored options to be restored to their default values. This
adds a global cleanup method for extcap and globally defined
preference values, which fixes the parameter problem with windows
Change-Id: I48e0cf846ef81f4732d652c6a2ad0020db5df08e
Reviewed-on: https://code.wireshark.org/review/13741
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
Fixed json and ek escape function
Fixed -j protocol filter to do exact match
Fixed -T json to correctly close json
Added -j protocol filter also to pdml output
Bug: 11754
Change-Id: I02f274e4a5a02346922b37bbe946c10340c242ea
Reviewed-on: https://code.wireshark.org/review/16034
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
TShark has had the functionality for awhile. While the GUI version
still has ways to change and persist Decode As functionality, adding
command line functionality gives the Decode As from initial launch
of the GUI.
Was also an excuse to refactor a bunch of code out of tshark.c
Bug: 5143
Change-Id: Ie67007d75e897bc06cc9afd9b84372a96b93778c
Reviewed-on: https://code.wireshark.org/review/16008
Reviewed-by: Michael Mann <mmann78@netscape.net>
This allows keeping the code-sharing with the static linking.
This "fixes" a hypothetical ABI mismatch with wsutil and avoids pulling more
external dependencies to wsutil than strictly necessary.
A nice side-effect is that libwsutil no longer depends on version.h.
Follow up to f95976eefc.
Change-Id: I8f0d6a557ab3f7ce6f0e2c269124c89f29d6ad23
Reviewed-on: https://code.wireshark.org/review/15002
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
Change-Id: I0950f61e90af5bb21c0017204de0c0b509616e5c
Reviewed-on: https://code.wireshark.org/review/14747
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
The "-Wwrite-strings" flag produces nuisance warnings. These warnings are
not useful, they're impossible to fix in a sane way and therefore are being
handled with casts of static strings to (char *).
This just moves the warning to [-Wcast-qual] and a compiler pragma is
in turn required (and used) to squelch that warning.
Remove the Wwrite-strings warning. Let that responsibility fall on the
programmer (as is done by casting).
Change-Id: I5a44dfd9decd6d80797a521a3373593074962fb5
Reviewed-on: https://code.wireshark.org/review/12162
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Have wsutil/file_util.h include them on UN*X, just as it includes io.h
on Windows, so we can have a rule of "if you do file operations, include
<wsutil/file_util.h> and use the routines in it".
Remove includes of unistd.h, fcntl.h, and sys/stat.h that aren't
necessary (whether because of the addition of them to wsutil/file_util.h
or because they weren't needed in the first place).
Change-Id: Ie241dd74deff284e39a5f690a297dbb6e1dc485f
Reviewed-on: https://code.wireshark.org/review/11619
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Have epan_init() return a success/failure Boolean indication. Catch
exceptions when calling the dissector registration routines and, if we
get one, report the error and return a failure indication.
If epan_init() fails, quit, but first make sure the reported error is
displayed.
Change-Id: I0300cbb1f66a5644f857a205235124909d684c50
Reviewed-on: https://code.wireshark.org/review/11340
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This allows for a global place to enable/disable all heuristic dissectors. This removes the need for individual dissector preferences, but those will be removed at a later date. The more important part is the epan code to save/restore the enabled state of the heuristic dissector. The GTK dialog was more for quickly testing the feature (there was already some GTK code in place that started the heuristic dialog tab)
Change-Id: Ie10687505c27a4456c49d5c4c69a5fc5f6394275
Ping-Bug:11152
Reviewed-on: https://code.wireshark.org/review/9508
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Change-Id: Ib982662db6cf68730a7d121eac60d9bc5ae67429
Reviewed-on: https://code.wireshark.org/review/9195
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Most of our sites are now HTTPS-only. Update URLs accordingly. Update
other URLs while we're at it. Remove or comment out dead links.
Change-Id: I7c4f323e6585d22760bb90bf28fc0faa6b893a33
Reviewed-on: https://code.wireshark.org/review/7621
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Squelch
warning: cast discards ‘__attribute__((const))’ qualifier from pointer target type [-Wcast-qual]
similar to g630f54f.
Change strtod to g_ascii_strtod to squelch a checkAPIs error.
Change-Id: Ib2d26ef89f08827a5adc07e35eaf876cd7b8d14e
Reviewed-on: https://code.wireshark.org/review/7269
Reviewed-by: Gerald Combs <gerald@wireshark.org>
dladdr() takes a void * as a code pointer; have init_progfile_dir() do
so, and do the casting in the calls. We don't care about the signature
of the function whose address we're passing, we just want to pass a
pointer to *something* in the main program.
Change-Id: I9372620a97b0eb53c2bb3c0c41a238b4408f3709
Reviewed-on: https://code.wireshark.org/review/7270
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Guy Harris