Update the Expert Information section of the User's Guide. Use the term
"Expert Information" to describe the dialog and "expert information
item" to describe each generated item. Update related text elsewhere.
Update the expert icon and other parts of the status bar docs.
Change-Id: I0c2cba0cbb3c74a1f6e3a37d4a2a592faccb350f
Reviewed-on: https://code.wireshark.org/review/35462
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Documentation of the Wireshark command line options between help text,
manual page and user's guide diverged over time. One aspect of this is
the implementation of more long options. This change tries to update
all documentation to be complete and in sync again.
Bug: 16168
Change-Id: Id833fbeb14fdb7b3dbc1564504a25d96f4367c91
Reviewed-on: https://code.wireshark.org/review/35047
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
WIRESHARK_CONFIG_DIR was introduced with Wireshark 3.0 and is more
cross-platform than WIRESHARK_APPDATA. The latter was presumably created
for use by PortableApps. Let's consider that an internal, undocumented
detail that might be change, and document WIRESHARK_CONFIG_DIR instead.
Change-Id: I0042d607b282cc6dee4b017b1e80b44087bd62e9
Reviewed-on: https://code.wireshark.org/review/34113
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Jeff Morriss <jeff.morriss.ws@gmail.com>
With the introduction of the ip command (from iproute2) on modern
Linux systems it becomes common to see this tool available,
gradually replacing tools like netstat and ifconfig.
Change-Id: I1fb309e741c07c93271b61a35c4833d36bcc5cb8
Signed-off-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Reviewed-on: https://code.wireshark.org/review/30924
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Make sure the -i <pipe> documentation is consistent and correct.
Change-Id: I9019effb658f914ac754e4ae893eafbe7c4b4da1
Reviewed-on: https://code.wireshark.org/review/30675
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add the ability to rotate files after a specified number of packets (`-b
packets:NUM`). Move some condition checks to capture_loop_write_packet_cb.
Add `-a packets:NUM` in order to be consistent. It is functionally
equivalent to the `-c` flag.
Add a corresponding "packets" option to the Capture Interfaces dialog
Output tab.
Add initial tests for autostop and ringbuffer conditions.
Change-Id: I66eb968927ed287deb8edb96db96d7c73526c257
Reviewed-on: https://code.wireshark.org/review/30534
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add 'v' option for VLAN ID resolving and get rid of
deprecated 'C' option.
Bug: 14826
Change-Id: I63104f4a465d251048693ad02882ea7eb2c4d926
Reviewed-on: https://code.wireshark.org/review/30029
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Rename the "ssl" protocol to "tls" and add an "ssl" alias. Prefer "TLS"
over "SSL" in user interface text and in the documentation.
Fix the test_tls_master_secret test while we're here.
Bug: 14922
Change-Id: Iab6ba2c7c4c0f8f6dd0f6d5d90fac5e9486612f8
Reviewed-on: https://code.wireshark.org/review/29649
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
At one point, I remember a discussion resulting in the official name of
the next-generation replacement for pcap format being changed to
"pcapng", with no hyphen.
Make Wireshark reflect that.
Change-Id: Ie66fb13a0fe3a8682143106dab601952e9154e2a
Reviewed-on: https://code.wireshark.org/review/25214
Reviewed-by: Guy Harris <guy@alum.mit.edu>
pcap provides a pcap_set_tstamp_type function, which can be used to request
hardware timestamps from a supporting kernel.
This patch adds support for aforementioned function as well as two new
command line options to dumpcap, wireshark and tshark:
--list-time-stamp-types
List time stamp types supported for the interface
--time-stamp-type <type>
Change the interface's timestamp method
Name choice mimics those used by tcpdump(1), which already supports this
feature. However, unlike tcpdump, we provide both options unconditionally.
If Wireshark was configured without pcap_set_tstamp_type being available,
--list-time-stamp-types reports an empty list.
Change-Id: I418a4b2b84cb01949cd262aad0ad8427f5ac0652
Signed-off-by: Ahmad Fatoum <ahmad.fatoum@siemens.com>
Reviewed-on: https://code.wireshark.org/review/23113
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add the "interval" option to "-b". Each new capture starts at the
exact start of a time interval. For instance, using -b interval:3600
will start a new capture file at each whole hour.
Changed the duration option in the GUI interfaces to use the new
interval option.
Change-Id: I0180c43843f5d2f0c2f50153c9ce42ac7fa5aeae
Reviewed-on: https://code.wireshark.org/review/22428
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Sake Blok <sake.blok@SYN-bit.nl>
List all of --enable-protocol, --disable-protocol, --enable-heuristic,
and --disable-heuristic in the SYNOPSIS section of the man pages.
Undent after the list of taps for the -z option, so the following
options are at the same indentation as other options.
List --enable-protocol in the DESCRIPTION, above --disable-protocol.
Include --enable-protocol in the help message.
Change-Id: I680a54430789f3543b2d539fbded22b0b57f7f76
Reviewed-on: https://code.wireshark.org/review/21159
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Default value for snaplen is defined in wiretap/wtap.h:
#define WTAP_MAX_PACKET_SIZE 262144
and used in capture_opts.c:
capture_opts->default_options.snaplen =
WTAP_MAX_PACKET_SIZE;
but help and man pages don't reflect this change.
Change-Id: I35ddf1e8b7ffd657f4e01b3fe6b4c44c9acece2b
Reviewed-on: https://code.wireshark.org/review/20738
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Bug: 11228
Change-Id: Id8bcc51ff694ef9f2019bc7509e440021d049d22
Reviewed-on: https://code.wireshark.org/review/19735
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Since v2.1.0rc0-184-gb0b53fa593, $XDG_CONFIG_HOME/wireshark (instead of
$HOME/.wireshark) is used, clarify this in the WSUG and manuals.
Change-Id: I74a6f9b86bd8d54ee326ca83d7536e091d6da08a
Reviewed-on: https://code.wireshark.org/review/20364
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
The feature activates/deactivates fullscreen mode of Qt UI.
A new menu item has been added as well as a shortcut (F11 or Ctrl+Cmd+F)
according to browsers common shortcut.
Change-Id: I01906b494d0a13ce70d27c00ebbe03e6ec87cbd7
Reviewed-on: https://code.wireshark.org/review/18332
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
The -m (monospace font) flag was deprecated in 2.2. Go ahead and remove
it in 2.3 / 2.4.
Change-Id: I6b4911174675cedec979621c2776353314e73eb1
Reviewed-on: https://code.wireshark.org/review/18193
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Text is partially copied from the tshark manual page.
Change-Id: I120e327f15394fc48fce6e4a122e7eab83e91c82
Reviewed-on: https://code.wireshark.org/review/17904
Reviewed-by: Michael Mann <mmann78@netscape.net>
Change-Id: Iac747655d09c94926e51c7ea1f23375650cd6641
Ping-Bug: 12305
Reviewed-on: https://code.wireshark.org/review/16446
Reviewed-by: João Valverde <j@v6e.pt>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Add support for -j, -J, and -l. Mark the -m flag deprecated.
Bug: 12546
Change-Id: Ic44b3997840018e5d571aa1813a1646bce11d4a6
Reviewed-on: https://code.wireshark.org/review/16083
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Move ui/filters.[ch] to filter_files.[ch] because dumpcap is using functionality.
Bug: 8091
Change-Id: I195c82fc023f97d6f331b8718c45a2d83d30faea
Reviewed-on: https://code.wireshark.org/review/5925
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Added a new relational test: 'x in {a b c}'. The only LHS entity
supported at this time is a field. The generated DFVM operations are
equivalent to an OR'ed series of =='s, but with the redundant existence
tests removed.
Change-Id: Iddc89b81cf7ad6319aef1a2a94f93314cb721a8a
Reviewed-on: https://code.wireshark.org/review/10246
Reviewed-by: Hadriel Kaplan <hadrielk@yahoo.com>
Petri-Dish: Hadriel Kaplan <hadrielk@yahoo.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Make sure "-z multicast,stat[,filter]" and "-z wlan,stat[,filter]" work.
Add some missing "-z" items to the man page.
Try to fix some MSVC++ warnings.
Change-Id: Ie18e5355d595e351f000f14d82781dcdf33141c3
Reviewed-on: https://code.wireshark.org/review/10184
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add the UDP multicast stream dialog. Abuse TapParameterDialog a bit more
so that we can edit parameters.
Remove some unused struct members and an unused function.
Change-Id: I962c70344e792f0959527e4bcba8a20bd7e8acf9
Reviewed-on: https://code.wireshark.org/review/10084
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add RpcServiceResponseTimeDialog, which handles DCE-RPC and ONC-RPC
service response time statistics. Try to make it as lightweight as
possible, since we might want to pull this into the RPC dissectors
similar to the other SRT statistics.
Allow program names on the command line in place of numbers or UUIDs. Make
matches case-insensitive. E.g. the following are equivalent:
-z rpc,srt,100003,3
-z rpc,srt,nfs,3
-z rpc,srt,NFS,3
as are the following:
-z dcerpc,srt,f5cc5a18-4264-101a-8c59-08002b2f8426,56
-z dcerpc,srt,nspi,56
-z dcerpc,srt,NSPI,56
Change-Id: Ie451c64bf6fbc776f27d81e3bc248435c5cbc9e4
Reviewed-on: https://code.wireshark.org/review/9981
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Move the boolean flag for using captured DNS packet info for name resolution
to the Name Resolution preferences settings, as it was rather surprising to
disable Name Resolution preferences and still have names being resolved. Also
disble them all if the '-n' command line switch is used, and re-enable it for
a 'd' character in the '-N' option.
Bug: 10337
Change-Id: Ie4d47bab0100db3360cc447cd3e446b2e39aa917
Reviewed-on: https://code.wireshark.org/review/9786
Petri-Dish: Hadriel Kaplan <hadrielk@yahoo.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Hadriel Kaplan <hadrielk@yahoo.com>
Change-Id: Ia31326105cf559c2196d45369270552fb78da6c7
Reviewed-on: https://code.wireshark.org/review/9692
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add ServiceResponseTimeDialog as a subclass of TapParameterDialog,
similar to StatsTreeDialog. Add initial plumbing for statistics menu
items and command line invocation.
Don't append "..." to menu item names. Don't add menu icons. In each
case this avoids repetitive UI clutter.
Change-Id: I463b95c93090160bb81d2e80b16aad389dc0bd6c
Reviewed-on: https://code.wireshark.org/review/8864
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Text adapted from that in the WSUG documentation of the same.
Ping-Bug: 1445
Ping-Bug: 11227
Change-Id: I4d07cba437e70324d19c5ae23e44b86c47b749a8
Reviewed-on: https://code.wireshark.org/review/8662
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Most of our sites are now HTTPS-only. Update URLs accordingly. Update
other URLs while we're at it. Remove or comment out dead links.
Change-Id: I7c4f323e6585d22760bb90bf28fc0faa6b893a33
Reviewed-on: https://code.wireshark.org/review/7621
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Remove emem's 8-byte-memory-alignment configure check as well as references
to all the environment variables emem used.
Change-Id: I897aec9e9c68e064454561e7a9f066b18892ec66
Reviewed-on: https://code.wireshark.org/review/6950
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The -X read_format extension was added in code but in the manuals.
Change-Id: I21692120229ef531671fc3db247809ace69d23b3
Reviewed-on: https://code.wireshark.org/review/742
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
This change adds the ability to pass on to lua scripts loaded from the
command-line (tshark or wireshark) additional arguments supplied by the
command-line. This will help us in our testsuites, but also might be
useful for user-created scripts. The additional arguments are passed in
using the '-X' eXtension switch.
Change-Id: Ib94cdf1ffd194ca84692fee7816665e4ff95efbd
Reviewed-on: https://code.wireshark.org/review/156
Reviewed-by: Evan Huus <eapache@gmail.com>
Tested-by: Evan Huus <eapache@gmail.com>
Gerald Combs