(1) Trailing/leading spaces are removed from 'name's/'blurb's
(2) Duplicate 'blurb's are replaced with NULL
(3) Empty ("") 'blurb's are replaced with NULL
(4) BASE_NONE, NULL, 0x0 are used for 'display', 'strings' and 'bitmask' fields
for FT_NONE, FT_BYTES, FT_IPv4, FT_IPv6, FT_ABSOLUTE_TIME, FT_RELATIVE_TIME,
FT_PROTOCOL, FT_STRING and FT_STRINGZ field types
(5) Only allow non-zero value for 'display' if 'bitmask' is non-zero
svn path=/trunk/; revision=28770
ethernet's VLAN tag. It is sometimes called the VSAN tag.
It used to be proprietary, but now it's standard.
Wireshark currently displays it as an 8-byte field without dissecting it further.
It'd be nice to have it broken down into fields. A patch is attached.
svn path=/trunk/; revision=22879
most have been tagged unused (few have been deleted if dissector has not been
modified since a long time)
move packet-ssl-utils.c to DISSECTOR_SRC
svn path=/trunk/; revision=21431
decode this field as relative offset and also store it in the fc_hdr structure so that FCP can pick it up and pass if to the SCSI payload data in/out dissector later
svn path=/trunk/; revision=19510
so that the two scsi transports FCP and ISCSI can provide the expected data transfer lengths to SCSI to allow SCSI reassembly.
NDMP does not really need these hints since for NDMP (and also iscsi-lite) there is conceptually always both data in and data out phases and there is never any fragmentation.
svn path=/trunk/; revision=19493
structures for scsi.
we no longer need the scsi_task_id structure passed by pinfo->private_data so get rid of it.
we no longer need the (broken by design) scsi_task_data hash table since this has been replaced byt hte itl and itlq structures and tracking
svn path=/trunk/; revision=17952
and get rid of some breakage in the design
let the scsi transport keep track of itl (initiator, target, lun) matching
and let it pass a itl structure to scsi that is persistent across packets.
let scsi use this itl structure to track device type for a specific itl instead of the (must have been) broken hashtable.
update both iscsi and fc to track the itl structure for scsi and schange the scsi signature to accept itl as a parameter.
more to come.
svn path=/trunk/; revision=17942
it is silly that scsi has to track these things itself when all the transports
already keep track of exchanges.
the scsi transports should all use the fc_exchange_data structure to pass lun to scsi and where scsi kan store the opcode between requests and data/response packets
svn path=/trunk/; revision=17829
ito make it easier to read use doublespace to separate the items on the expansion line instead of ',' since so many of the strings contain spaces.
cleanup fc slightly and remove a redundant parameter
svn path=/trunk/; revision=16019
rewrite the functions to do proto_item_append_text() instead of building a string and then printing it.
The new function is functionally equivalent to the previous function except it does not print the values of the multi-bit fields to the expansion
(the expansion line is already a km wide as it is)
there are now only 202 strcpy() left in epan/dissectors down from 300+ instances some weeks ago.
svn path=/trunk/; revision=16009
directory to the epan directory. Some of them should perhaps ultimately
be moved to epan/dissectors, if they pertain only to stuff exported by a
particular dissector.
Fix Gerald's e-mail address in files we're moving.
svn path=/trunk/; revision=15844
Support some new messages and fix a couple of bugs.
packet-fc.h - Added a #define for a Cisco MDS-specific frame called OHMS (online health mgmt srv) packet-fc.c - Support for OHMS frame, fixed an incorrect "malformed frame" error caused on ACK1 frames (they
don't contain anything but (encap hdr + FC hdr + encap trailer), fixed incorrect detection of
last-data-frame
packet-fcct.h - Support for new service type, "Fabric Controller", used in conjunction with FC-SW3 ESS message,
exported the service name value string definitions and
packet-fcct.c - Support for recognizing "Fabric Controller" service type and "vendor-specific" service
packet-fcswils.h - Support for ESS & MRRA messages, defined as part of FC-SW3 packet-fcswils.c - Support for ESS & MRRA messages, defined as part of FC-SW3
packet-scsi.c - Support for Verify and Write&Verify SBC commands.
svn path=/trunk/; revision=15799
I've done more than a day to change the timestamp resolution from microseconds to nanoseconds. As I really don't want to loose those changes, I'm going to check in the changes I've done so far. Hopefully someone else will give me a helping hand with the things left ...
What's done: I've changed the timestamp resolution from usec to nsec in almost any place in the sources. I've changed parts of the implementation in nstime.s/.h and a lot of places elsewhere.
As I don't understand the editcap source (well, I'm maybe just too tired right now), hopefully someone else might be able to fix this soon.
Doing all those changes, we get native nanosecond timestamp resolution in Ethereal. After fixing all the remaining issues, I'll take a look how to display this in a convenient way...
As I've also changed the wiretap timestamp resolution from usec to nsec we might want to change the wiretap version number...
svn path=/trunk/; revision=15520
-use g_snprintf instead of sprintf and snprintf
-use g_strdup_printf where appropriate
-remove #include "snprintf.h" (as only g_snprintf should be used)
-replace some more alloc/realloc/calloc/free with their glib pendants
svn path=/trunk/; revision=15264
The FC D_id and S_id fields in teh FC frame encapsulated inside iFCP unfortunately has "undefined" (semi-random) values so we can not use th S_/D_id matching in FC when transported atop iFCP.
Change iFCP to call a new fc_ifcp handler instead of the fc handler.
Add a new handler to FC specific to iFCP.
Only set the pinfo->src/dst fields to the S_id/D_id fields IFF the FC frame was NOT transported ontop of iFCP.
Othervise we just use the TCP/IP values that are already stored there.
Some Hosts use RelativeOffset fields for FC. We can only dissect the RelOff field with offset 0.
Change FC to only call the FCP subdissector if offset==0 when relative offsets are used.
Some hosts when using relative offsets do not specify a proper value for rxid in teh commands instead htey lkeave it as 0xffff
Change the FCP conversation matching to ignore RXID when searching for a conversation.
svn path=/trunk/; revision=15076
1) Added a setup_frame parameter to conversation_t
2) Used the conversation_t next to maintain a list of conversations with the
same src/dest tuple but different setup_frame number.
3) Changed the signature of find_conversation() and conversation_new() to pass
in the frame number.
4) Adjusted packet-sdp to select RTP conversation if both m=audio and m=image
are present, and T.38 conversation if only m=image is present. I expect that
RTP/T.38 dissecting to be better, but I don't have a way to generate T.38
packets.
svn path=/trunk/; revision=13243
Stig Bjørlykke