Ninja keeps track of its built files in .ninja_log, so if you copy a
pre-built target into a fresh build directory, Ninja will ignore and
overwrite it. This includes the tarball generated by the 'dist' target.
In get-export-release.sh, check for a preexisting tarball and preserve
it by default. This lets us pass the dist tarball from one GitLab CI
stage to other stages without recreating it. It's also arguably the
right thing to do in general, since we record and publish the tarball
hashes for each release and different contents for the same filename can
cause confusion.
Move the dist tarball to the build directory in .gitlab-ci.yml, and add
a note about using the tarball exclusively.
Standard naming convention in Wireshark generates a version that
make the rpm build fail on Fedora. Since we've not evidence that
this happens on other platforms, just disable on that one.
We initially disabled dark mode support in Info.plist when we didn't
support it very well, and later passively enabled it depending on our
SDK version. Go ahead and force it on since we officially support dark
mode. Closes#17098.
New link type DLT_ETW is added for write and read Event Trace on Windows.
This change updates MBIM dissector to decode a MBIM message from
a DLT_ETW packet.
Convert wiretap/ascend.y.in from Bison/YACC to Lemon and rename it to
wiretap/ascend_parser.lemon. Tighten up some of our scanning and
parsing. Make the indentation in it and related files consistent. Aside
from the recent IPv4 fragment offset changes, this produces identical
output to the 3.4 branch for the Ascend trace files I have here.
Remove the comment about supporting other commands. Another timeline
might have an Ascend that successfully pivoted to DSL or 15625B+1D
gigabit ISDN, but this one has neither.
This was our last/only Bison/YACC file, so remove Bison/YACC as a
development and packaging dependency and remove references to it from
the documentation.
Re-enable Fedora build and add CentOS 8 and OpenSUSE 15.2 builds.
Fedora 33 does out of build tree cmake builds and needs spec file changes.
CentOS 8 has some changes with cmake and other packages that are similar to
older Fedora, and needs extra repositories enabled to get -devel packages
(still missing -devel for some optional libraries). OpenSUSE Leap 15.2 also
has some changes needed to build. Note that OpenSUSE Leap 15.1 is EOL
at the end of November 2020. Fixes#16971
It's possible to play opus payload with libopus (https://opus-codec.org/).
Closes#16882.
Helped-by: Pascal Quantin <pascal.quantin@gmail.com>
Signed-off-by: Lin Sun <lin.sun@zoom.us>
Signed-off-by: Yuanzhi Li <ryanlee@mail.ustc.edu.cn>
Add ui/urls.h to define some URLs on various of our websites. Use the
GitLab URL for the wiki. Add a macro to generate wiki URLs.
Update wiki URLs in comments etc.
Use the #defined URL for the docs page in
WelcomePage::on_helpLabel_clicked; that removes the last user of
topic_online_url(), so get rid of it and swallow it up into
topic_action_url().
The uninstaller should run with elevated privileges to allow deletion
of files from protected directories.
Modifying the uninstall script to require elevation then causes the
uninstaller_installer that creates the uninstaller to also require
elevation which happens at build time so defeat that
by setting the env var __COMPAT_LAYER to "RunAsInvoker" before calling
the uninstaller_installer.
Achieving this from CMake requires a script to call to set the env var
and then calling the executable.
Change-Id: I056931bc4f9b41877b8f31d765d49fee11b54e39
Reviewed-on: https://code.wireshark.org/review/37955
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Extcap binaries are not part of default install.
Normal (graphical) allows them to be selected for installation.
Add flags to allow install when doing command line (silent) install.
Ping-Bug: 16562
Change-Id: I6ce0fa3b46f9820dc7f66945cda963a3f629579b
Reviewed-on: https://code.wireshark.org/review/37185
Petri-Dish: Roland Knall <rknall@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
When installing ChmodBPF on macOS, assign the access_bpf group to the first
free GID greater than 100, rather to the default which starts at 500. Using
a GID less than 500 hides it in the System Preferences Users & Groups pane.
Bug: 6402
Change-Id: I62ed63bc64cb2721880467ffd0dc290ea57c8461
Reviewed-on: https://code.wireshark.org/review/37676
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Although we don't depend on any of Qt's SVG classes directly, we do use
SVG icons in Preferences → Appearance → Language and QIcon loads its SVG
engine dynamically. If it's not present Wireshark will still run, but
the user won't see any flag icons.
Require QtSVG in the Debian and RPM packaging. It's not that large (~
400k here on Ubuntu 18.04) and ensures that we have a uniform user
experience across platforms. In this particular case, if the user
experience happens to be "Wireshark's UI is in a language I don't
understand" the little flags can come in handy.
Change-Id: If3c2e8a6040967353dbc462ee475ef12514b25f9
Reviewed-on: https://code.wireshark.org/review/36037
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
In osx-app.sh, $VERSION used to hold the minor version of the OS. We no
longer set it and it's probably safe to assume that we're building on
Lion or later, so remove it.
Change-Id: I8e85cd7c2fe2162019c7c436b7865be95d4a33e2
Reviewed-on: https://code.wireshark.org/review/36039
Reviewed-by: Gerald Combs <gerald@wireshark.org>
It is possible to decode iLBC payload. It uses libilbc library (https://github.com/TimothyGu/libilbc).
Bug: 16314
Change-Id: Id4cad7ae32305a0e94ef32beb24e07733d7f834e
Reviewed-on: https://code.wireshark.org/review/35686
Reviewed-by: João Valverde <j@v6e.pt>
Petri-Dish: Pascal Quantin <pascal@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Sparkle's AutoUpdate.app has its own signature, which fails Apple's
notarization requirements.
Change-Id: I5fc5490a3e7ef63dd84fe59369ddd8cf42ddeff6
Reviewed-on: https://code.wireshark.org/review/35813
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The updates to windeployqt-to-nsis.ps1 g7a09c78f12 added SetOutPath
calls to qt-dll-manifest.nsh. This means we need to reset the output
path before adding our translation files.
Change-Id: I4b4ede72efa67cc4617aaae5baf8d38df6952df7
Reviewed-on: https://code.wireshark.org/review/35705
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The NSIS licensing page is centered around making the user agree to
a EULA. We don't have one of those. Replace the "you must accept" and
"I agree" text with something more neutral.
We could alternatively omit with the licensing page altogether, but
the GPL is an important aspect of the project and deserves some sort
of mention.
Bug: 1115
Change-Id: I5fd5beac2188b61a90c2842de7d7547aa815ff4f
Reviewed-on: https://code.wireshark.org/review/35624
Reviewed-by: Anders Broman <a.broman58@gmail.com>
We run `windeployqt ... --pdbs` at build time, which means that we need
to be careful not to include them in the NSIS package. Switch from using
wildcards ("File ...\*") to using separate "File" commands for each file.
Simplify the PDB Zip package command while we're here.
Bug: 16307
Change-Id: Ibd9bcbdfdc216f1f6a067baf711bbc184845143f
Reviewed-on: https://code.wireshark.org/review/35670
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Run osx-extras.sh before building the ChmodBPF installer package.
Change-Id: Iec3f88da86e48b5aac385369c7e68f23babc4c34
Reviewed-on: https://code.wireshark.org/review/35491
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add macosx/osx-extras.sh, which can be used to sign the ChmodBPF script.
Bug: 15782
Change-Id: I9929dd6db067f8bc1097faac28ab9467f5a89a82
Reviewed-on: https://code.wireshark.org/review/35481
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Update the minimum version in various documents. Remove some
no-longer-needed code from scripts that call windeployqt.
Change-Id: I16da4bced9780c9f1b1969aae7c52e2fce1968aa
Reviewed-on: https://code.wireshark.org/review/35391
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
The default shell in macOS 10.15 is zsh[1]. Bash appears to be included
for now, but it might be a good idea to start migrating away from it
just in case it's removed at some point in the future.
[1]https://support.apple.com/en-ca/HT208050
Change-Id: Ibe4338105d8fa1a590f84543489255ade71920d6
Reviewed-on: https://code.wireshark.org/review/35216
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Use the correct path to the Wireshark executable when finding
dependencies and adding debugging symbols.
Change-Id: Iefafa9d453ce60e77853f2d125769826b4d702c0
Reviewed-on: https://code.wireshark.org/review/35202
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Although c-ares support was techically optional, it was either on by
default or required in all of our packaging. Go ahead and require it
globally. C-ares is widely available and synchronous name resolution can
easily result in a horrific user experience.
Change-Id: Id67c797316ed6b8a0ab5052e55a43a1b9e2a2464
Reviewed-on: https://code.wireshark.org/review/35188
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Remove the option to run Wireshark from the NSIS installer. As noted in
bug 16195, this runs Wireshark as Administrator which is something we
recommend against.
Bug: 16195
Change-Id: I0692262a611d72d9e9f9c2131ce71cc62b4737b1
Reviewed-on: https://code.wireshark.org/review/35143
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Set or clear SPARKLE_LIBRARIES and SPARKLE_INCLUDE_DIRS in
FindSparkle.cmake, similar to what we do in other modules. Use them
instead of SPARKLE_LIBRARY and SPARKLE_INCLUDE_DIR.
Change-Id: I023c711edd6a44421aadf85413da3207d9b08e64
Reviewed-on: https://code.wireshark.org/review/35097
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Copy Sparkle.framework correctly. Force signing so that we replace
Sparkle's signature with ours.
In osx-app.sh, don't sign a file or framework if it's already signed.
Fix the osx-dmg.sh usage message while we're here.
Change-Id: I697073d234958e1d8386650935a132237ad88f64
Reviewed-on: https://code.wireshark.org/review/35095
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add support for automatic updates using the Sparkle framework. Add
FindSparkle.cmake and associated CMake plumbing. Add a public key and
other info to Info.plist.in. Add ui/macosx/sparkle_bridge.{h,m}, which
wraps the Sparkle API. Make code that's specific to WinSparkle
Windows-only.
Add Sparkle installation steps to the macos-setup scripts. Sparkle
prints a warning if your bundle is unsigned (which is the case during
development) so disable installing it by default.
Updating here takes a long time. We might be able to fix that by
shipping our DSYMs separately.
Change-Id: I6cc6671db5657dadc514bda6bf6e1c8bbc9468a5
Reviewed-on: https://code.wireshark.org/review/35090
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
While we are at it, let's deactivate by default the legacy loopback adapter installation
Change-Id: I4950e9dc6de8a2faeda272c03165a9f305862f6b
Reviewed-on: https://code.wireshark.org/review/35004
Petri-Dish: Pascal Quantin <pascal@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Pascal Quantin <pascal@wireshark.org>
This reverts commit f1285fcf06.
NSIS package is broken with this commit.
Change-Id: Ief22a308edad188fa2d5fab79355f19493359fa6
Reviewed-on: https://code.wireshark.org/review/34758
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
HTML docs are installed to both $docdir and $pkgdatadir. Fix that
to install to $docdir only.
Change-Id: I115158585b6df9170d9a01249adbc8548df91f14
Reviewed-on: https://code.wireshark.org/review/34640
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
In debug builds different glib .dll files are being used than in release
builds. List all .dll files in (generated) nsis all-manifest.nsh and WiX
DependentComponents.wxs guarding the debug files under BUNDLE_DEBUG_DLLS
ifdef. CMake generator expression is used to include /DBUNDLE_DEBUG_DLLS
parameter to MakeNSIS in debug builds. Similarly, -dBUNDLE_DEBUG_DLLS is
added to WiX candle in debug builds.
Change-Id: Ibfe7a640d25ba25f14bb910708ab83d0634d48db
Reviewed-on: https://code.wireshark.org/review/34703
Petri-Dish: Pascal Quantin <pascal@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Pascal Quantin <pascal@wireshark.org>
Add osx-dmg.sh back and make it a simple wrapper around dmgbuild and
codesign.
Change-Id: I0baa21fd971aa1b06e1a6700881cd7625dffff35
Reviewed-on: https://code.wireshark.org/review/34629
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Scripting the Finder in order to lay out our disk image assumes that we
have access to the Finder. This might not be the case on our builder,
and it arguably shoudn't be.
Switch from using a Bash script + AppleScript to build and lay out our
.dmg to using dmgbuild, which creates our .DS_Store directly using
Python's ds_store module.
Change-Id: I2e4a9dd89bc8297c9cbd9df7aa8d3a44447bde85
Reviewed-on: https://code.wireshark.org/review/34623
Reviewed-by: Gerald Combs <gerald@wireshark.org>
arrange_dmg.applescript is failing on the macOS builder, so comment it
out for now.
Change-Id: Ibe7bf249623832954e9f67d241513b549dff990c
Reviewed-on: https://code.wireshark.org/review/34621
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Create ChmodBPF installer and uninstaller packages using pkgbuild and
productbuild. Place them in Wireshark.app/Resources/Extras.
Add a path_helper installer and uninstaller which respectively add and
remove /etc/*paths.d/Wireshark.
Remove the PackageMaker and utility-launcher assets and build targets.
Show a message in the main welcome screen if we don't have capture
permissions. Add an link which launches the ChmodBPF installer.
Add a "macOS Extras" item to About → Folders.
Migrate "Read me first" from RTF to Asciidoctor, which lets us add links
and looks like our other documentation.
Rename dmg_set_style.scpt to arrange_dmg.applescript and make it plain
text. Always run it in osx-dmg.sh.
Bug: 6991
Bug: 12593
Bug: 11399
Ping-Bug: 16074
Change-Id: I7b6aa89aae2be522b4141b0d44e8142dec749e90
Reviewed-on: https://code.wireshark.org/review/31047
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Removing Wireshark.app during preflight is the wrong way to ensure that
we uninstall old assets.
Bug: 16050
Change-Id: I39a0129e29830f8b6bc7ef228f3886db51d963ec
Reviewed-on: https://code.wireshark.org/review/34542
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Created the Microsoft Diameter file based on MS-CHAP-* AVPs listed at
https://www.iana.org/assignments/eap-numbers/eap-numbers.xhtml#eap-numbers-10
Many values are displayed as bytes for simplicit. The MS-CHAP2-Success
attribute could for example be dissected further as 1 byte followed by a
string, but that requires more effort.
Allow padding to be missing since the eap-ttls-mschapv2.pcapng capture
would throw a Malformed Packet exception otherwise.
Bug: 15603
Change-Id: I9efc322a86802e78bb6cd4bc3df1c1282a45fe9e
Reviewed-on: https://code.wireshark.org/review/34291
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Microsoft reshuffled their documentation - almost all of it moved from
msdn.microsoft.com to docs.microsoft.com. Some blogs moved to
devblogs.microsoft.com; the comments *didn't* move, so in one case we go
to the Wayback Machine - the link isn't dead, but it formats horribly,
at least on my browser, but the archived version formats OK.
Use the Wayback Machine for some URLs, and update others.
Update the sections for MS-ADTS.
Point to the HTML versions of some RFCs and I-Ds.
Change-Id: I344b20f880de63f1ae2a4e3f9ff98af78a7fe139
Reviewed-on: https://code.wireshark.org/review/34101
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Change all wireshark.org URLs to use https.
Fix some broken links while we're at it.
Change-Id: I161bf8eeca43b8027605acea666032da86f5ea1c
Reviewed-on: https://code.wireshark.org/review/34089
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Ensure that public text in error messages and dialogs point to https.
Ensure that the generated PDML files include scripts over https.
Change-Id: I75d42704c2bbb33b05492261b3e1d45dc6e301f9
Reviewed-on: https://code.wireshark.org/review/34027
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
altool isn't guaranteed to clean up after itself, e.g. if an earthquake
takes down the Developer ID Notary Service (thanks to Jim Young for
tracking this down). Instead of checking for the existence of tokens,
check their existence and age.
Change-Id: Iac216d524a4894115ecf33589af1bbdebcc9cbab
Reviewed-on: https://code.wireshark.org/review/33856
Reviewed-by: Gerald Combs <gerald@wireshark.org>
altool appears to only support one notarization upload at a time. Add a
loop that waits for an empty upload token directory.
Convert the status check to a timeout loop.
Change-Id: I30fd15b6f098acfe5d9bdcd72237c56cc066dda4
Reviewed-on: https://code.wireshark.org/review/33749
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add our plugins to the bundle binary list.
Copy libraries using `install` in order to ensure that we can doctor
them up.
Bug: 15867
Change-Id: I864455f6ef7312938e89493015fd55874ab0a0c3
Reviewed-on: https://code.wireshark.org/review/33744
Reviewed-by: Gerald Combs <gerald@wireshark.org>
When gathering our dependencies, work around an issue with libbrotli's
install name similar to what we do with libssh.
Bug: 15730
Change-Id: I571746848e3343d81c286be66f6fe6510c698d6f
Reviewed-on: https://code.wireshark.org/review/32990
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Instead of reintroducing the variable, inline the version. This matches
with other version checks in the same file and debian/control.
Change-Id: I4dc178575b8f24e7f8e07e8d761e245f14c65ffa
Fixes: v3.1.0rc0-566-g8c26217548 ("CMake: bail out if minimum GLib version is not satisfied")
Reviewed-on: https://code.wireshark.org/review/32917
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
The answer to the question "do we need to add hardened runtime
entitlements or exceptions?" in osx-app.sh is "yes". Update a comment
accordingly.
Change-Id: Icc6f9ed31838aa6342f405a244e726586e9c0c4d
Reviewed-on: https://code.wireshark.org/review/32703
Reviewed-by: Gerald Combs <gerald@wireshark.org>
This adds the entitlement to everything we sign. I cannot test a more
granular approach without access to an Apple issued codesigning cert/key
pair.
Bug: 15667
Change-Id: I9fe962a06b681d33853b0944765987e21d21be2d
Reviewed-on: https://code.wireshark.org/review/32700
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Comment out the NSRequiresAquaSystemAppearance key in Info.plist under
the assumption that both we and Qt will have dark mode support in usable
shape by the next release.
Ping-Bug: 15511
Change-Id: Ic5960034ce302d81dcc624cbd0e2c017865f44e2
Reviewed-on: https://code.wireshark.org/review/32504
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
We know the native Windows library path early on in the configure
process. Use it to set the location of the Npcap and USBPcap installers
instead of trying to derive it from the GLib DLL path.
Change-Id: I02d48e115b374fb6080a7fe8017cba789254d5f1
Reviewed-on: https://code.wireshark.org/review/32475
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Explicitly exclude our various Windows package targets from the Visual
Studio default build. This will hopefully keep the 32-bit Windows builder
from trying to build the portableapps_runtime target when it shouldn't.
Change-Id: Id8481e92abda9b1a4784b8c8e8b5a1b3f1b4647e
Reviewed-on: https://code.wireshark.org/review/32256
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The packages that PackageMaker creates don't remove old files when
upgrading. Add a preflight script that removes Wireshark.app if it
exists.
Fix a version check while we're here.
Change-Id: I8be8cbf51b34fef8a2d4259478b7d3199d976de3
Reviewed-on: https://code.wireshark.org/review/32150
Reviewed-by: Gerald Combs <gerald@wireshark.org>
On the previous builder, `otool -L /path/to/libssh.4.dylib` returned a
bare "libssh.4.dylib", which required a workaround. On the new builder
it returns "@rpath/libssh.4.dylib". Adjust the workaround accordinly.
Remove a couple of chmods while we're here. Permission issues are better
addressed elsewhere.
Change-Id: If0692219d9558c77b45620e7aad309853012b7e8
Reviewed-on: https://code.wireshark.org/review/32059
Reviewed-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Petri-Dish: Jaap Keuter <jaap.keuter@xs4all.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
It might currently only be used by the Wireshark app, but somebody
might, at some point, have a TShark option to generate a PDF or JPEG
or... with a map image.
Hopefully this fixes the build of the WiX installer.
Change-Id: Iac9d65b23156d0c1d4c3cceef7d0b74fdcce64c1
Reviewed-on: https://code.wireshark.org/review/32065
Reviewed-by: Guy Harris <guy@alum.mit.edu>
It's possible to do a *build* on Windows without the Wireshark app being
built; however, the *installers* can't currently be built.
If we have NSIS or WiX, and Wireshark isn't being built, report a
warning, and don't have targets for building the installers.
Change-Id: I2cc9c1f6ba375dbcb6d5b7520d2fa33ad97ba9fe
Reviewed-on: https://code.wireshark.org/review/32061
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This feature was removed in v2.5.1rc0-427-gf529ab5d0a, anticipating that
MaxMind would remove support for it in 2019. They have however changed
their mind and maintained latitude and longitude information.
They recommend displaying an accuracy radius, but the reported values
are 50, 100, 200 and 1000km. When implemented literally, a marker in
Ireland would cover the whole island plus mainland, so I have instead
opted to use a fixed radius of 1km at deeper zoom levels.
The old ipmap.html file was outdated and had broken tiles, I rewrote a
new one from scratch using the light-weight Leaflet library combined
with tiles from OpenStreetMap. This is more mobile-friendly and secure
(https, SRI). To improve handling of nearby or overlapping nodes,
clustering is used (individual nodes can still be inspected).
Browser compatibility results: IE8 is unusable, IE9 partially works
(tooltips sometimes disappear and the cluster radius control is gone),
IE11 works. Of course Firefox 65 and Chromium 72 have no issues.
The map popup description in the generated GeoJSON structure is now
split in several properties, allowing presentation to be handled by the
HTML page instead of the C code.
Bug: 14693
Change-Id: If2ec9c518f7723ac0ab27b6272463356875a0ff2
Reviewed-on: https://code.wireshark.org/review/31952
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
In both cases, a file used in the process of building the installer is
generated from the Wireshark binary, so, unless we also arrange not to
put that file in the installer if Wireshark isn't being built, we can't
build the installer.
Have ADD_NSIS_PACKAGE_TARGET and ADD_WIX_PACKAGE_TARGET check whether
we're building Wireshark and fail if we aren't. That way, *if* we're
including the NSIS or WiX packages in the build files, we fail if we
aren't building Wireshark.
Change-Id: Icfe4d2491bd721cdd5fef424e9a7565c4990defa
Reviewed-on: https://code.wireshark.org/review/32053
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
If the Visual C++ Redistributable installer returns 1638
(ERROR_PRODUCT_VERSION) treat it as a success.
Bug: 15509
Change-Id: I136704ddc3266abc1a79f0fdcdd0b6cb7e33266e
Reviewed-on: https://code.wireshark.org/review/32041
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Convert our self-generating FAQ to Asciidoctor via the following steps:
- `help/faq.py > /tmp/faq.html`.
- `pandoc -t asciidoc -o docbook/faq.adoc /tmp/faq.html`.
- Manually clean up the markup using a text editor.
Question and answer content was left intact. Removing or updating
obsolete content will have to be done in a separate change.
The Asciidoctor project uses the .adoc extension, so start using it here
as well.
The contents of the "help" directory appear to have been used for
offline support in help_url.c, but that functionality was removed in
2008 in 242e3b78bc. Its content is covered in the User's Guide and man
pages so remove it.
Change-Id: I9060eefe97cfc137f8b414077c30f814379b576a
Reviewed-on: https://code.wireshark.org/review/32014
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The new macOS builder sometimes fails due to busy disk images. Try to
work around the issue by adding a sleep (in case the culprit is
Spotlight) and by forcibly detaching disk images.
Change-Id: I65bd46420e7ae69d03b7c9a15a2bb0385a1cedff
Reviewed-on: https://code.wireshark.org/review/32035
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Sign our bundle as described in Apple's Code Signing Guide. Enable the
Hardened Runtime when signing.
Look for packagemaker in our PATH before checking specific locations.
Switch from zlib to bzip2 compression for our .dmg. Sign our .dmg.
To do: Notarization.
Change-Id: Ia6556e67998ff247dd3d77d6f040773e070f66cc
Reviewed-on: https://code.wireshark.org/review/32032
Reviewed-by: Gerald Combs <gerald@wireshark.org>
In CMake we only used PROJECT_RELEASE_VERSION to construct our plugin
path, so rename it to PLUGIN_PATH_ID. Use a dash to separate version
numbers on macOS in order to allow code signing and a period elsewhere.
In the C code we only used VERSION_RELEASE to construct our plugin path,
so rename it to PLUGIN_PATH_ID.
Change-Id: I02abc591d7857269e8d47b414b61df4b28a25f2d
Reviewed-on: https://code.wireshark.org/review/32013
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
They weren't getting put in the version-number subdirectory, so the
plugin loader wasn't finding them.
If that causes problems with codesign, then we need to either
1) figure out how to make it work with codesign
or
2) for macOS, not put plugins in a version-number subdirectory
***AND*** change the plugin loading process not to look for
compiled in a version-number subdirectory.
Change-Id: I58d344b728d05369d35edef4e4e530f10034e930
Reviewed-on: https://code.wireshark.org/review/32000
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Update the code signing portions of the packaging scripts to match newer
versions of macOS.
Change-Id: I5e03611d8db61416955e797edcadfcff1404cc38
Reviewed-on: https://code.wireshark.org/review/31996
Reviewed-by: Gerald Combs <gerald@wireshark.org>
"%bcond_without" enables a feature by default. Be sure to explicitly
disable features to match the requested configuration.
Change-Id: I90687f35bcd953670e147be9e70af03aaeaef5dc
Ping-Bug: 14606
Reviewed-on: https://code.wireshark.org/review/31933
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Uninstalling WinPcap through recent Npcap installers seem to fail
for some users. For now install Npcap native mode instead.
Bug: 15476
Change-Id: I9114eb824fb1bd99d5da82e8bff87f7b7eb49a74
Reviewed-on: https://code.wireshark.org/review/31870
Reviewed-by: Pascal Quantin <pascal@wireshark.org>
The doc files have been added in v2.9.1rc0-618-g1bb1ffa9ca, and since
then, rpm builds complain:
RPM build errors:
File listed twice: /usr/local/bin/dumpcap
Installed (but unpackaged) file(s) found:
/usr/local/share/doc/wireshark/androiddump.html
/usr/local/share/doc/wireshark/capinfos.html
/usr/local/share/doc/wireshark/captype.html
[cut]
The "with ninja" condition has been removed as well since it leads to a
dead end.
Change-Id: I95185ba8cb0d488a7fd222c04ff7ff2a637a817a
Reviewed-on: https://code.wireshark.org/review/31873
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
It is not necessary to know the full path to a program. Instead use the
'type' shell builtin (part of POSIX) to detect availability.
Change-Id: Id68b298625d389a1f7843f52f56312bf81d97b80
Reviewed-on: https://code.wireshark.org/review/31540
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Move git-export-release.sh to packaging/source. Have the source and RPM
packaging derive version information from CMake's VERSION variable. This
brings them in line with the rest of our packaging and avoids having to
read chicken entrails^W^Wgit output.
Make sure we always generate wireshark.spec.
Bug: 15359
Change-Id: I188efda489c94449a10a612abebf9c2872c305cb
Reviewed-on: https://code.wireshark.org/review/31504
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
We package the documentation for other programs we supply, so we should
package the documentation for them as well.
Change-Id: I37854631bad4aa799fb6ebb009bea3f4692fe530
Reviewed-on: https://code.wireshark.org/review/31492
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Purely cosmetic, show the various VC redist paths using the native
format.
Change-Id: I96d0b088f703e3e8dea6623ec258139eff066d90
Reviewed-on: https://code.wireshark.org/review/31251
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
As of 25e1e2c848 we no longer set LIBRARY_OUTPUT_DIRECTORY to
Wireshark.app/Contents/Frameworks. As a result we need to copy them into
place during our packaging process.
Change-Id: Idbdea289dce60e9acf9ab317f4151bfe2c993ddd
Reviewed-on: https://code.wireshark.org/review/31160
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Pass --minimize to dsymutil, which reduces the size of our dsyms. Print
the name of each file as we dsymify it.
Change-Id: Ic8b14daa2ceaa07c2c9ca3162020e5861d165f6d
Ping-bug: 15361
Reviewed-on: https://code.wireshark.org/review/31150
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Pass the `-v` flag to candle, light, and heat.
Remove a couple of apparently unused and definitely misleading variables.
Change-Id: If3c50f3f1596f244e8354b77bbd443779f5aa981
Reviewed-on: https://code.wireshark.org/review/31132
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Along with checking for exit code 3010 (reboot required), check for
other errors and show a warning as needed.
Add a note about the Universal CRT to the User's Guide.
Bug: 15358
Change-Id: Ia49dbdc66edc8ea68f957ec353f1115536002d13
Reviewed-on: https://code.wireshark.org/review/31100
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
While we are at it, let's propose by default to upgrade to Npcap when WinPcap
is intalled.
Change-Id: Id9aeb3a507127b5956185fba2b74c60cf1dfdf96
Reviewed-on: https://code.wireshark.org/review/31079
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add a MIN_MACOS_VERSION variable. Update it and sanity check it
according to CMAKE_OSX_DEPLOYMENT_TARGET and our Qt version. Use it to
set our minimum macOS version in various places.
Change-Id: Icaf0dbe463f34d182986868021e2b56d2239da38
Reviewed-on: https://code.wireshark.org/review/31048
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Pass /V4 to makensis so that we can see what files are in our package.
Change-Id: I4d1225f8cfce66945d086bc6481f739a56f16549
Reviewed-on: https://code.wireshark.org/review/31023
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add an "appimage" target that will create an AppImage package. Current
AppImage tools assume that you only have one executable, so add
a custom AppRun wrapper that will let you run our associated CLI
utilities via symlinks, e.g.
ln -s ./Wireshark-3.2.1-x86.appimage capinfos
./capinfos --help
Packaging requires both linuxdeployqt and appimagetool, although we
might be able to reduce this to just linuxdeployqt:
https://github.com/probonopd/linuxdeployqthttps://github.com/AppImage/AppImageKit
I haven't done much testing beyond running Wireshark and
capinfos. There are undoubtedly issues that need to be fixed.
Bug: 14464
Change-Id: Ic004ba1962e6a8630ebb017349d9b2c0462fd5fe
Reviewed-on: https://code.wireshark.org/review/30953
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add a script that disables all of our desegmentation and reassembly
preferences and use it to create a "No Reassembly" profile.
Change-Id: Icd0b72e9e271a511e637acde9018f3aae018e589
Reviewed-on: https://code.wireshark.org/review/30799
Reviewed-by: Anders Broman <a.broman58@gmail.com>
JSON-GLib was added in v2.9.0rc0-201-g511c2e166a, but is no longer
necessary since we have a home-grown JSON dumper (wsutil/json_dumper.h).
Remove the remaining traces and additionally remove GObject from
FindGLIB2.cmake since it was only added for JSON-GLib.
Change-Id: If9dfd2c60cec130f98109d100bdb6618bde06ba0
Reviewed-on: https://code.wireshark.org/review/30733
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Python 3 is widely available. All major Linux distributions support it.
RHEL is covered via EPEL (which is already required for cmake3). Drop
support for Python 2 in order to reduce maintenance costs. The main
motivation is being able to simplify the tests.
CMake is updated to search for Python >= 3.4 and will fail if
unavailable (generating dissectors.c requires Python, so it is quite an
important piece to have).
The documentation is updated to reflect the Python 3.7 paths used by
Chocolatey. Tested the git-review installation instructions in Windows 7
x64 without a previous Chocolatey installation.
macOS brew now installs Python 3 (its dependencies are already installed
by python@2 for libxml2). The macOS (non-brew variant) is updated to use
the official 64-bit installer to install Python 3.
Change-Id: I80b1e36957f338e0dad1bfcc173b6418682cddba
Reviewed-on: https://code.wireshark.org/review/30192
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Prevent dark mode from being used on newer versions of mac os x, as long as
Qt does not allow proper dark mode handling
Change-Id: Ifee14ec690331689b0a8a7486829dd129a2687b4
Reviewed-on: https://code.wireshark.org/review/30425
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
The chmods seem to be working.
Change-Id: I0f85a1428de511497597a3fd304c700ea1a1f846
Reviewed-on: https://code.wireshark.org/review/30331
Reviewed-by: Guy Harris <guy@alum.mit.edu>
For some reason it's *not* taking away write permission; make it verbose
to try to debug that.
Change-Id: I180309953d36798d2da3a74959cdd934adc5a4a3
Reviewed-on: https://code.wireshark.org/review/30325
Reviewed-by: Guy Harris <guy@alum.mit.edu>
But *do* get rid of the pre-launchd XQuartzFixer startup item; it's
probably not there, but we might as well leave things as clean as we
can.
Change-Id: Icfdbe6c0d022cde8cf30bd3c79fbf77896e6fe98
Reviewed-on: https://code.wireshark.org/review/30322
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Take away group write permission for stuff under
/Library/Application Support/Wireshark. For some reason, it's getting
set; it's not necessary.
Change-Id: I4280a635e0c171cf5ad17cb91fe20d746c2daf79
Reviewed-on: https://code.wireshark.org/review/30317
Reviewed-by: Guy Harris <guy@alum.mit.edu>
They don't need it; read permission suffices.
While we're at it, rename a variable to indicate that it's the path to
the plist for ChmodBPF, not the path to the executable for ChmodBPF.
Change-Id: Ib7537e26ae3f4477c4110759049a8cd7d2f09cf6
Reviewed-on: https://code.wireshark.org/review/30303
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add an sdjournal extcap, which reads journal entries using the
sd-journal API and dumps them as journal Export Format records.
Change-Id: I17ccfa88ab5d053c16c869cd26e580d84022502e
Reviewed-on: https://code.wireshark.org/review/29479
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Obsoleting the gtk packages allows a clean upgrade to the Qt version (without
requiring the user to manually remove those packages).
Set the install prefix based on what the user set when running cmake (like
we did with autotools).
Change-Id: Ica283f40bc002951af4ff1f9d719295c0a598c3b
Reviewed-on: https://code.wireshark.org/review/29892
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Development-related files (header files, cmake files, the pkg-config file)
don't belong in the base RPM. This moves those ~600 files (~4 MiB) to a
separate RPM for those who may want them.
Also clean up a few other things in the SPEC file while here to make things
more readable and consistent.
Change-Id: I89f93a8696c54b9117595f1da9f856c080853dce
Reviewed-on: https://code.wireshark.org/review/29814
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Installing and enabling ccache makes testing RPM builds (which always do a
complete build) much less painful.
Change-Id: Ie9ab1794614701cdbe261089f81398c2b7d1f027
Reviewed-on: https://code.wireshark.org/review/29812
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Move the maxminddb dependencies out of if(qt) and above the RPM's
description; this makes them actually work and takes the RPM code for
those dependencies out of the Qt RPM's Description (where they clearly
weren't doing any good).
Change-Id: I01705f8f5f6435571cf521b68f8450730ddaa383
Reviewed-on: https://code.wireshark.org/review/29808
Reviewed-by: Jeff Morriss <jeff.morriss.ws@gmail.com>
The vcredist version (directory name) has changed. Instead of listing
all possible versions, just glob for it. I only observed a single
directory anyway.
As CMake can find compilers without vcvarsall.bat, it is possible that
env var VCINSTALLDIR is not set. Fallback to querying the location from
the registry (as was done in VS2015).
The MSVC_VERSION/VS/VCRT table is partially based on
https://blogs.msdn.microsoft.com/vcblog/2017/11/15/side-by-side-minor-version-msvc-toolsets-in-visual-studio-2017/
Change-Id: I58107597c5037ab597a0d620925cb870e6ef7793
Reviewed-on: https://code.wireshark.org/review/28980
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Since Qt 5.10, platform styles are no longer part of QtWidgets. Be sure
to delete the separate plugin (styles\qwindowsvistastyle.dll). See
https://bugreports.qt.io/browse/QTBUG-65177
Change-Id: I20376f787339c9a2072ef8127b3ea5cc55be8b06
Reviewed-on: https://code.wireshark.org/review/29003
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Change the dependencies of various wsug targets to update_tools_help
instead of the files it generates. Have the nsis_package_prep
and wix_package_prep targets depend on user_guide_chm instead of
update_tools_help. This should make parallel builds of all_guides,
wix_package_prep and possibly other targets more reliable.
Change-Id: I473f0e608aade1ac0053c03bef0942c69c650f65
Reviewed-on: https://code.wireshark.org/review/28838
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
It ensures to have up to date help output for our command line tools
Change-Id: I5b900be692c05d6231678cf3ca82e86ef843d01c
Reviewed-on: https://code.wireshark.org/review/28476
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Qt5CoreConfigExtras.cmake sets Qt5::qmake. Use it to find the
corresponding path to macdeployqt and use those in osx-app.sh.
Change-Id: I2e67f0126e272fc95d40476b9bfc83ab38d73cee
Reviewed-on: https://code.wireshark.org/review/28359
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
CMake 3.11 with the Ninja generator started complaining about CMP0058
related to ui/qt/CMakeFiles/qtui_autogen.dir/RCCstock_iconsInfo.cmake
amd other files (AUTORCC). While the policy could be set explicitly,
let's try to modernize the CMake configuration:
- Drop CMP0042, if this gives issues with macOS, then it must be solved
in a different way using non-deprecated methods.
- Drop CMP0054 and ensure that all if("${foo}") and if(${foo}) are
converted to if(foo).
- Remove string comparison against "-NOTFOUND", it already evaluates to
false in an if condition.
- Use CXX_STANDARD/CXX_STANDARD_REQUIRED for Qt 5.7 and newer.
- Assume that copy_if_different can accept multiple sources (CMake 3.5).
- Consistency: Out of the 60 CMake 3.11 FindXxx.cmake files that use
find_library, 34 contain "XXX_LIBRAR" while 16 contain "Xxx_LIBRAR".
Let's assume uppercase variables (now custom MaxMindDB include dirs
are correctly used).
CMake 3.5 was chosen as the next version because of its wide support.
Ubuntu 14.04 ships with cmake3 3.5.1, Debian jessie-backports has 3.6.2,
EPEL for CentOS/RHEL6 includes cmake3 3.6.1 and SLES12 SP2 has 3.5.
Change-Id: I2fa7b94bf8cc78411f414987d17bab3a33dfb360
Reviewed-on: https://code.wireshark.org/review/27444
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add back the PROGRAM_NAME_GTK definition, since its links might be left
over from a previous install. Remove the PROGRAM_NAME_QT references,
since it's been the same as PROGRAM_NAME for quite a while.
Change-Id: I79724a6a1c9861ffae9aed6a59d48205a40941cd
Reviewed-on: https://code.wireshark.org/review/27459
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Migrate the Additional Tasks page to nsDialog. Create it using NSIS
Dialog Designer.
Migrate the Modern UI code (WinPcapPage.ini and USBPcapPage.ini) to
Modern UI2.
Use LogicLib flow control instead of Gotos+labels in more places.
Change-Id: I1a3733f0202ca372456074f43e5ae23b1da4e1b9
Reviewed-on: https://code.wireshark.org/review/27449
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Remove GTK+. Add links to Npcap, WinPcap, and USBPcap. Move the capture
options to the top of the options dialog. Replace group boxes with
simple titles.
Add an EditorConfig entry for our WiX files.
Change-Id: Ibd581fa09f333fa84228f0a6f723ab62df85ee8e
Reviewed-on: https://code.wireshark.org/review/27292
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The installer is not presenting applicable text in the description
box when highlighting the new file type and codec plugin options.
Change-Id: I25fbc7800a594796ac8f4f15b39431a89b404d0e
Signed-off-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Reviewed-on: https://code.wireshark.org/review/27248
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
If it's run as "tshark", it should run TShark, not Wireshark.
Bug: 14643
Change-Id: I0d4e6fa64e42b7a2e2d4b89b53db62748b4f288d
Reviewed-on: https://code.wireshark.org/review/27245
Reviewed-by: Guy Harris <guy@alum.mit.edu>
It has been replaced by cmake.
Change-Id: I83a5eddb8645dbbf6bca9f026066d2e995d8e87a
Reviewed-on: https://code.wireshark.org/review/26969
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Remove GTK+ entries from .gitignore and start removing it from
packaging.
Change-Id: I70391000906e983eab250c8158b486c3dc6d4a16
Reviewed-on: https://code.wireshark.org/review/26988
Reviewed-by: Gerald Combs <gerald@wireshark.org>
This step is needed because of the differences in the %cmake macro
between Fedora/Centos and openSUSE.
Change-Id: I7ac94e560b4c298934f78e96036a814f3eadc4a5
Reviewed-on: https://code.wireshark.org/review/26924
Reviewed-by: Anders Broman <a.broman58@gmail.com>
It is not inherited by previous target.
Change-Id: I11be59211a900375e02fce8c05cc4164b8dc42e4
Reviewed-on: https://code.wireshark.org/review/26877
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add a "guides" bcond so that we can make Asciidoctor and the HTML guide
installation optional.
Change-Id: I5f9e6cc59689dba7d600cc721547aed020652f00
Reviewed-on: https://code.wireshark.org/review/26867
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Support ninja and ninja-build (Centos7) so far.
Change-Id: I846a0645f24f6cfdc83bd725827d1681a5a1f174
Reviewed-on: https://code.wireshark.org/review/26856
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Copy the current wireshark.spec.in and update it for use with CMake.
Remove the Qt4, GTK+2, and GTK+3 options. Add Ninja and mmdbresolve
options.
The rpm-package target builds a tarball using git-export-release.sh and
therefore must be run from a git checkout. The RPM _prefix macro is set
to CMAKE_INSTALL_PREFIX, so you'll probably want to run
cmake -DCMAKE_INSTALL_PREFIX=/usr ...
Change-Id: Ib014494d8858a0059126404cd91528ded5d8a9f6
Reviewed-on: https://code.wireshark.org/review/26579
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Mention Npcap on the WinPcap installer page and add a link to it.
Update some other text and tell developers to use NSIS 3.0 while we're
here.
Change-Id: I64728f014f518439ba4a38eda7a283274d40fcdc
Reviewed-on: https://code.wireshark.org/review/26515
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Only install mmdbresolve if MAXMINDDB_FOUND is true.
Fixup the Qt about box and WiX GTK defines while we're here.
Change-Id: I7ac3c21ddb4aebc1dae1c3d8cfd2bcafc4139d2e
Reviewed-on: https://code.wireshark.org/review/26299
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
MaxMind is discontinuing its legacy databases in April in favor of
GeoIP2, which use a newer database format (MaxMind DB). The reference C
library (libmaxminddb) is available under the Apache 2.0 license which
isn't quite compatible with ours.
Add mmdbresolve, a utility that reads IPv4 and IPv6 addresses on stdin
and prints resolved information on stdout. Place it under a liberal
license (MIT) so that we can keep libmaxminddb at arm's length. Add
epan/maxmind_db.[ch], which spawns mmdbresolve and communicates with it
via stdio.
Migrate the preferences and documentation to MaxMindDB.
Change the IPv4 and IPv6 asnum fields to FT_UINT32s. Change the
geographic coordinate fields to FT_DOUBLEs.
Bug: 10658
Change-Id: I24aeed637bea1b41d173270bda413af230f4425f
Reviewed-on: https://code.wireshark.org/review/26214
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Cleanup the support for older versions of Visual Studio
Change-Id: Ieb97d56e9bff6a5902433e8d99b27276bc7034f7
Reviewed-on: https://code.wireshark.org/review/26247
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The WiX toolset configuration files have to be extended to handle the
new plugin directory structure as well. Apart from the EPAN plugins
the wiretap and codec plugins have to be included as well.
Change-Id: I173e6b87a88e4ef8aa3283a308e2b5207f0d6ba2
Signed-off-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Reviewed-on: https://code.wireshark.org/review/26176
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Remove the endpoint map and its button from the Qt and GTK+ UIs. It
depends on GeoIP Legacy for coordinate information and those databases
are being deprecated in favor of MaxMind DB. We *could* upgrade the code
to use mmdbresolve, but according to
https://dev.maxmind.com/geoip/geoip2/geolite2/ they're also going to
remove coordinate information from GeoLite2:
"In addition, in 2019, latitude and longitude coordinates in the
GeoLite2 databases will be removed.* Latitude and longitude coordinates
will continue to be provided in GeoIP2 databases. Please check back for
updates."
Change-Id: I43e1593d282a0f1aae897b1f4724117d1496b21e
Reviewed-on: https://code.wireshark.org/review/26229
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Set the API target level to Win7, along with installer changes
to match.
Change-Id: Icd93964eadf93018c56218e3efdfed10b9f8959a
Reviewed-on: https://code.wireshark.org/review/26218
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
This codec plugin serves a dual purpose.
First it is to add L16 codec suppport to Wireshark.
Second it is an illustration of a basic codec plugin module.
Change-Id: I64394dab3257ae49dece0257b16cd969503918e2
Reviewed-on: https://code.wireshark.org/review/26131
Reviewed-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Petri-Dish: Jaap Keuter <jaap.keuter@xs4all.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
See if that makes it possible for CrashReporter to fully symbolicate
crash dumps, so the user gets line numbers and the like in crash dumps
from the OS, and we get them if the user sends a crash dump to us.
Change-Id: I8bb48b2d2f6b3e23fea43c1a3bd3a5a9a97a5c2c
Reviewed-on: https://code.wireshark.org/review/26123
Reviewed-by: Guy Harris <guy@alum.mit.edu>